- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor check in the
middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYrMu9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpuZAP9gS8Xcd7nenV3i9j4lCFktWQrvQwvh
wyNb9UuLqPVMUQEAkk4hzq38P2UvEOZ+v+WdJnXfOb3wpFhrxWFycz5ZVAw=
=9WXA
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor
check in the middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
* tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Remove unwanted initialization in __trace_uprobe_create()
tracefs: Fix syntax errors in comments
tracing: Simplify conditional compilation code in tracing_set_tracer()
tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()
- Mark a folio accessed at the right time (Yu Kuai)
- Fix a race for folios being replaced in the middle of a read (Brian Foster)
- Clear folio->private in more places (Xiubo Li)
- Take the invalidate_lock in page_cache_ra_order() (Alistair Popple)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmK0l3kACgkQDpNsjXcp
gj7vAAf8CLJqVFaJHXDhpvCKVqenn7yufrf9AQg78JsMa1Bym8ZjwYS+60F3znET
UPIqcjPgqFQI17c0NhcB10ZqnwlVUsFa+bQC1HIwWEXrFJ3G2JKftrMg5PeESyDI
ZzFQWyjFtNtMUG5Tl5FYjG+OQ6U71+7zr136SmxbcMgrGObkOR40DQ4nzkswMuU3
F8sJJ9lULdMPS/xtviQwNeVAfz9brteCb5EU3xFw2Hxx8S+nWEguHSFV7Yo52KXg
pyvOlxEr7FmsMhiwltL/yZbUS8yoQZAp1NacH843C3t2OE3grKrLWAR/CnCpvCjn
atMeFS8QuXUqtWOgMYxfUYmr2i1GBA==
=eAFT
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19b' of git://git.infradead.org/users/willy/pagecache
Pull pagecache fixes from Matthew Wilcox:
"Four folio-related fixes for 5.19:
- Mark a folio accessed at the right time (Yu Kuai)
- Fix a race for folios being replaced in the middle of a read (Brian
Foster)
- Clear folio->private in more places (Xiubo Li)
- Take the invalidate_lock in page_cache_ra_order() (Alistair Popple)"
* tag 'folio-5.19b' of git://git.infradead.org/users/willy/pagecache:
filemap: Fix serialization adding transparent huge pages to page cache
mm: Clear page->private when splitting or migrating a page
filemap: Handle sibling entries in filemap_get_read_batch()
filemap: Correct the conditions for marking a folio as accessed
In prior kernels, we did file assignment always at prep time. This meant
that req->task == current. But after deferring that assignment and then
pushing the inflight tracking back in, we've got the inflight tracking
using current when it should in fact now be using req->task.
Fixup that error introduced by adding the inflight tracking back after
file assignments got modifed.
Fixes: 9cae36a094 ("io_uring: reinstate the inflight tracking")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the last few years I have been the sole maintainer of KVM, albeit
getting serious help from all the people who have reviewed hundreds of
patches. The volume of KVM x86 alone has gotten to the point where one
maintainer is not enough; especially if that maintainer is not doing it
full time and if they want to keep up with the evolution of ARM64 and
RISC-V at both the architecture and the hypervisor level.
So, this patch is the first step in restoring double maintainership
or even transitioning to the submaintainer model of other architectures.
The changes here were mostly proposed by Sean offlist and they are twofold:
- revisiting the set of KVM x86 reviewers. It's important to have an
an accurate list of people that are actively reviewing patches ("R"),
as well as people that are able to act on bug reports ("M"). Otherwise,
voids to be filled are not easily visible. The proposal is to split
KVM on Hyper-V, which is where Vitaly has been the main contributor
for quite some time now; likewise for KVM paravirt support, which
has been the main interest of Wanpeng and to which Vitaly has also
contributed (e.g., for async page faults). Jim and Joerg have not been
particularly active (though Joerg has worked on guest support for AMD
SEV); knowing them a bit, I can't imagine they would object to their
removal or even be surprised, but please speak up if you do.
- promoting Sean to maintainer for KVM x86 host support. While for
now this changes little, let's treat it as a harbinger for future
changes. The plan is that I would keep the final integration testing
for quite some time, and probably focus more on -rc work. This will
give me more time to clean up my ad hoc setup and moving towards a
more public CI, with Sean focusing instead on next-release patches,
and the testing up to where kvm-unit-tests and selftests pass. In
order to facilitate collaboration between Sean and myself, we'll
also formalize a bit more the various branches of kvm.git.
Nothing is going to change with respect to handling pull requests to Linus
and from other architectures, as well as maintainance of the generic code
(which I expect and hope to be more important as architectures try to
share more code) and documentation. However, it's not a coincidence
that my entry is now the last for x86, ready to be demoted to reviewer
if/when the right time comes.
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 2bb2b7b57f.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
This reverts commit 09c5ba0aa2.
This reverts commit b87f02307d.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-6-pmladek@suse.com
This reverts commit 8e27473211.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-5-pmladek@suse.com
This reverts commit ab406816fc.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-4-pmladek@suse.com
This reverts commit c3230283e2.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-3-pmladek@suse.com
This reverts commit b87f02307d.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com
Commit 793917d997 ("mm/readahead: Add large folio readahead")
introduced support for using large folios for filebacked pages if the
filesystem supports it.
page_cache_ra_order() was introduced to allocate and add these large
folios to the page cache. However adding pages to the page cache should
be serialized against truncation and hole punching by taking
invalidate_lock. Not doing so can lead to data races resulting in stale
data getting added to the page cache and marked up-to-date. See commit
730633f0b7 ("mm: Protect operations adding pages to page cache with
invalidate_lock") for more details.
This issue was found by inspection but a testcase revealed it was
possible to observe in practice on XFS. Fix this by taking
invalidate_lock in page_cache_ra_order(), to mirror what is done for the
non-thp case in page_cache_ra_unbounded().
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
In our efforts to remove uses of PG_private, we have found folios with
the private flag clear and folio->private not-NULL. That is the root
cause behind 642d51fb07 ("ceph: check folio PG_private bit instead
of folio->private"). It can also affect a few other filesystems that
haven't yet reported a problem.
compaction_alloc() can return a page with uninitialised page->private,
and rather than checking all the callers of migrate_pages(), just zero
page->private after calling get_new_page(). Similarly, the tail pages
from split_huge_page() may also have an uninitialised page->private.
Reported-by: Xiubo Li <xiubli@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Two different events such as pai_crypto/KM_AES_128/ and
pai_crypto/KM_AES_192/ can be installed multiple times on the same CPU
and the events are executed concurrently:
# perf stat -e pai_crypto/KM_AES_128/ -C0 -a -- sleep 5 &
# sleep 2
# perf stat -e pai_crypto/KM_AES_192/ -C0 -a -- true
This results in the first event being installed two times with two seconds
delay. The kernel does install the second event after the first
event has been deleted and re-added, as can be seen in the traces:
13:48:47.600350 paicrypt_start event 0x1007 (event KM_AES_128)
13:48:49.599359 paicrypt_stop event 0x1007 (event KM_AES_128)
13:48:49.599198 paicrypt_start event 0x1007
13:48:49.599199 paicrypt_start event 0x1008
13:48:49.599921 paicrypt_event_destroy event 0x1008
13:48:52.601507 paicrypt_event_destroy event 0x1007
This is caused by functions event_sched_in() and event_sched_out() which
call the PMU's add() and start() functions on schedule_in and the PMU's
stop() and del() functions on schedule_out. This is correct for events
attached to processes. The pai_crypto events are system-wide events
and not attached to processes.
Since the kernel common code can not be changed easily, fix this issue
and do not reset the event count value to zero each time the event is
added and started. Instead use a flag and zero the event count value
only when called immediately after the event has been initialized.
Therefore only the first invocation of the the event's add() function
initializes the event count value to zero. The following invocations
of the event's add() function leave the current event count value
untouched.
Fixes: 39d62336f5 ("s390/pai: add support for cryptography counters")
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The pai_crypto PMU has to check the event number. It has to be in
the supported range. This is not the case, the lower limit is not
checked. Fix this and obey the lower limit.
Fixes: 39d62336f5 ("s390/pai: add support for cryptography counters")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Events CPU_CYCLES and INSTRUCTIONS can be submitted with two different
perf_event attribute::type values:
- PERF_TYPE_HARDWARE: when invoked via perf tool predefined events name
cycles or cpu-cycles or instructions.
- pmu->type: when invoked via perf tool event name cpu_cf/CPU_CYLCES/ or
cpu_cf/INSTRUCTIONS/. This invocation also selects the PMU to which
the event belongs.
Handle both type of invocations identical for events CPU_CYLCES and
INSTRUCTIONS. They address the same hardware.
The result is different when event modifier exclude_kernel is also set.
Invocation with event modifier for user space event counting fails.
Output before:
# perf stat -e cpum_cf/cpu_cycles/u -- true
Performance counter stats for 'true':
<not supported> cpum_cf/cpu_cycles/u
0.000761033 seconds time elapsed
0.000076000 seconds user
0.000725000 seconds sys
#
Output after:
# perf stat -e cpum_cf/cpu_cycles/u -- true
Performance counter stats for 'true':
349,613 cpum_cf/cpu_cycles/u
0.000844143 seconds time elapsed
0.000079000 seconds user
0.000800000 seconds sys
#
Fixes: 6a82e23f45 ("s390/cpumf: Adjust registration of s390 PMU device drivers")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
[agordeev@linux.ibm.com corrected commit ID of Fixes commit]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Callback copy_oldmem_page() returns either error code or zero.
Instead, it should return the error code or number of bytes copied.
Fixes: df9694c797 ("s390/dump: streamline oldmem copy functions")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
In case old memory was successfully copied the passed iterator
should be advanced as well. Currently copy_oldmem_page() is
always called with single-segment iterator. Should that ever
change - copy_oldmem_user and copy_oldmem_kernel() functions
would need a rework to deal with multi-segment iterators.
Fixes: 5d8de293c2 ("vmcore: convert copy_oldmem_page() to take an iov_iter")
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
If a platform device's remove callback returns non-zero, the device core
emits a warning and still removes the device and calls the devm cleanup
callbacks.
So it's not save to not unregister the gpiochip because on the next request
to a GPIO the driver accesses kfree()'d memory. Also if an IRQ triggers,
the freed memory is accessed.
Instead rely on the GPIO framework to ensure that after gpiochip_remove()
all GPIOs are freed and so the corresponding IRQs are unmapped.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The TP_printk macro's are not supposed to use custom code ([1]) or else
tools such as perf cannot use these events.
Convert the opcode string representation to use the __string wiring that
the event framework provides ([2]).
[1]: https://lwn.net/Articles/379903/
[2]: https://lwn.net/Articles/381064/
Fixes: 033b87d24f ("io_uring: use the text representation of ops in trace")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220623083743.2648321-1-dylany@fb.com
[axboe: fixup spurious removal of sq_thread assignment]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This error path returns 1, but it should instead propagate the negative
error code from winbond_sio_enter().
Fixes: a0d6500941 ("gpio: winbond: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Meteor Lake TCSS(Type-C Subsystem) xHCI needs to be runtime suspended
whenever possible to allow the TCSS hardware block to enter D3cold and
thus save energy.
Cc: stable@kernel.org
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the same way as Intel Alder Lake TCSS (Type-C Subsystem) the Raptor
Lake TCSS xHCI needs to be runtime suspended whenever possible to
allow the TCSS hardware block to enter D3cold and thus save energy.
Cc: stable@kernel.org
Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ports are not turned off in shutdown then runtime suspended
self-powered USB devices may survive in U3 link state over S5.
During subsequent boot, if firmware sends an IPC command to program
the port in DISCONNECT state, it will time out, causing significant
delay in the boot time.
Turning off roothub port power is also recommended in xhci
specification 4.19.4 "Port Power" in the additional note.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irq is disabled in xhci_quiesce(called by xhci_halt, with bit:2 cleared
in USBCMD register), but xhci_run(called by usb_add_hcd) re-enable it.
It's possible that you will receive thousands of interrupt requests
after initialization for 2.0 roothub. And you will get a lot of
warning like, "xHCI dying, ignoring interrupt. Shouldn't IRQs be
disabled?". This amount of interrupt requests will cause the entire
system to freeze.
This problem was first found on a device with ASM2142 host controller
on it.
[tidy up old code while moving it, reword header -Mathias]
Cc: stable@kernel.org
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
-----BEGIN PGP SIGNATURE-----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=iY8+
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.19, take #2
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
The selftests, when built with newer versions of clang, is found
to have over optimized guests' ucall() function, and eliminating
the stores for uc.cmd (perhaps due to no immediate readers). This
resulted in the userspace side always reading a value of '0', and
causing multiple test failures.
As a result, prevent the compiler from optimizing the stores in
ucall() with WRITE_ONCE().
Suggested-by: Ricardo Koller <ricarkol@google.com>
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Message-Id: <20220615185706.1099208-1-rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here are some new modem device ids and support for further PL2303
device types.
All but the final commit (RM500K device id) have been in linux-next and
with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYrRX4AAKCRALxc3C7H1l
CB+fAQD1h5BRHdaCJ2vTarMGbL95lcZqdw1l4NRLgHe68csH+QEAlo32t2D26d9r
MEgGvtAeHgPDoATxQk20c1PVHgDe4wE=
=lbN1
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.19-rc4
Here are some new modem device ids and support for further PL2303
device types.
All but the final commit (RM500K device id) have been in linux-next and
with no reported issues.
* tag 'usb-serial-5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
USB: serial: option: add Telit LE910Cx 0x1250 composition
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmK0P+0SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkmBkP/1m5Et04wgtlEfQJtudZj0Sadra0tu6P
vaYlqtiRNMziSY/hxG1p4w7giM4gD7fD3S12Pc/ueCaUwxxILN/eZ/hNgCq9huf6
IbmVmfq6YNZwDaNzFDP8UcIqjnxbg1B3XD41dN7+FggA9ogGFkOvuAcJByzdANVX
BLOkQmGP22+pNJmniH3KYvCZlHIa+LVeRjdjdM+1/LKDs2pxpBi97obyzb5zUiE5
c5E7+BhkGI9X6V1TuHVCHIEFssYNWLiTJcw76HptWmK9Z/DlDEeVlHzKbAMNTycl
I8eTLXnqgye0KCKOqJ4fN+YN42ypdDzrUILKMHGEddG1lOot/2XChgp8+EqMY7Nx
Gjpjh28jTsKdCZMFF3lxDGxeonHciP6lZA80g3GNk4FWUVrqnKEYpdy+6psTkpDr
HahjmFWylGXfmPIKJrsiVGIyxD4ObkRF6SSH7L8j5tAVGxaB5MDFrCws136kACCk
ZyZiXTS0J3Cn1fAb2/vGKgDFhbEWykITYPaiVo7pyrO1jju5qQTtiKiABpcX0Ejs
WxvPA8HB61+kEapIzBLhhxRl25CXTleGE986au2MVh0I/HuQBxVExrRE9FgThjwk
YbSKhR2JOcD5B94HRQXVsQ05q02JzxmB0kVbqSLcIAbCOuo++LZCIdwR5XxSpF6s
AAFhqQycWowh
=JFWo
-----END PGP SIGNATURE-----
Merge tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in
cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment"
* tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
sock: redo the psock vs ULP protection check
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
net: dsa: qca8k: reduce mgmt ethernet timeout
net: dsa: qca8k: reset cpu port on MTU change
MAINTAINERS: Add a maintainer for OCP Time Card
hinic: Replace memcpy() with direct assignment
Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
...
- fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- add another broken identifier quirk (Leo Savernik)
- fix up a quirk because Samsung reuses PCI IDs over different products
(me)
-----BEGIN PGP SIGNATURE-----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=82SK
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.19-2022-06-23' of git://git.infradead.org/nvme into block-5.19
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- add another broken identifier quirk (Leo Savernik)
- fix up a quirk because Samsung reuses PCI IDs over different products
(Christoph Hellwig)"
* tag 'nvme-5.19-2022-06-23' of git://git.infradead.org/nvme:
nvme: move the Samsung X5 quirk entry to the core quirks
nvme: fix the CRIMS and CRWMS definitions to match the spec
nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH
Since commit 83cbce957446("block: add error handling for device_add_disk /
add_disk"), bdev->bd_holder_dir can not be empty now, so remove WARN_ON()
from bd_link_disk_holder.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074100.2251301-1-linan122@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All small changes, mostly device-specific:
- A regression fix for PCM WC-page allocation on x86
- A regression fix for i915 audio component binding
- Fixes for (longstanding) beep handling bug
- Runtime PM fixes for Intel LPE HDMI audio
- A couple of pending FireWire fixes
- Usual HD-audio and USB-audio quirks, new Intel dspconf entries
-----BEGIN PGP SIGNATURE-----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=TcQa
-----END PGP SIGNATURE-----
Merge tag 'sound-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small changes, mostly device-specific:
- A regression fix for PCM WC-page allocation on x86
- A regression fix for i915 audio component binding
- Fixes for (longstanding) beep handling bug
- Runtime PM fixes for Intel LPE HDMI audio
- A couple of pending FireWire fixes
- Usual HD-audio and USB-audio quirks, new Intel dspconf entries"
* tag 'sound-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add quirk for Clevo NS50PU
ALSA: hda: Fix discovery of i915 graphics PCI device
ALSA: hda/via: Fix missing beep setup
ALSA: hda/conexant: Fix missing beep setup
ALSA: memalloc: Drop x86-specific hack for WC allocations
ALSA: hda/realtek: Add quirk for Clevo PD70PNT
ALSA: x86: intel_hdmi_audio: use pm_runtime_resume_and_get()
ALSA: x86: intel_hdmi_audio: enable pm_runtime and set autosuspend delay
ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg
ALSA: hda: intel-dspcfg: use SOF for UpExtreme and UpExtreme11 boards
firewire: convert sysfs sprintf/snprintf family to sysfs_emit
firewire: cdev: fix potential leak of kernel stack due to uninitialized value
ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly
ALSA: hda/realtek - ALC897 headset MIC no sound
ALSA: usb-audio: US16x08: Move overflow check before array access
ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
unmap_grant_pages() currently waits for the pages to no longer be used.
In https://github.com/QubesOS/qubes-issues/issues/7481, this lead to a
deadlock against i915: i915 was waiting for gntdev's MMU notifier to
finish, while gntdev was waiting for i915 to free its pages. I also
believe this is responsible for various deadlocks I have experienced in
the past.
Avoid these problems by making unmap_grant_pages async. This requires
making it return void, as any errors will not be available when the
function returns. Fortunately, the only use of the return value is a
WARN_ON(), which can be replaced by a WARN_ON when the error is
detected. Additionally, a failed call will not prevent further calls
from being made, but this is harmless.
Because unmap_grant_pages is now async, the grant handle will be sent to
INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same
handle. Instead, a separate bool array is allocated for this purpose.
This wastes memory, but stuffing this information in padding bytes is
too fragile. Furthermore, it is necessary to grab a reference to the
map before making the asynchronous call, and release the reference when
the call returns.
It is also necessary to guard against reentrancy in gntdev_map_put(),
and to handle the case where userspace tries to map a mapping whose
contents have not all been freed yet.
Fixes: 745282256c ("xen/gntdev: safely unmap grants in case they are still in use")
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220622022726.2538-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
This device shares the PCI ID with the Samsung 970 Evo Plus that
does not need or want the quirks. Move the the quirk entry to the
core table based on the model number instead.
Fixes: bc360b0b16 ("nvme-pci: add quirks for Samsung X5 SSDs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Adjust the values of NVME_CAP_CRMS_CRIMS and NVME_CAP_CRMS_CRWMS masks as
they are different from the ones in TP4084 - Time-to-ready.
Fixes: 354201c53e ("nvme: add support for TP4084 - Time-to-Ready Enhancements").
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Micron MTFDKBA2T0TFH device reports the same subsysem NQN for
all devices. Add a quick to ignore it.
Signed-off-by: Leo Savernik <l.savernik@aon.at>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a packet enters the OVS datapath and does not match any existing
flows installed in the kernel flow cache, the packet will be sent to
userspace to be parsed, and a new flow will be created. The kernel and
OVS rely on each other to parse packet fields in the same way so that
packets will be handled properly.
As per the design document linked below, OVS expects all later IPv6
fragments to have nw_proto=44 in the flow key, so they can be correctly
matched on OpenFlow rules. OpenFlow controllers create pipelines based
on this design.
This behavior was changed by the commit in the Fixes tag so that
nw_proto equals the next_header field of the last extension header.
However, there is no counterpart for this change in OVS userspace,
meaning that this field is parsed differently between OVS and the
kernel. This is a problem because OVS creates actions based on what is
parsed in userspace, but the kernel-provided flow key is used as a match
criteria, as described in Documentation/networking/openvswitch.rst. This
leads to issues such as packets incorrectly matching on a flow and thus
the wrong list of actions being applied to the packet. Such changes in
packet parsing cannot be implemented without breaking the userspace.
The offending commit is partially reverted to restore the expected
behavior.
The change technically made sense and there is a good reason that it was
implemented, but it does not comply with the original design of OVS.
If in the future someone wants to implement such a change, then it must
be user-configurable and disabled by default to preserve backwards
compatibility with existing OVS versions.
Cc: stable@vger.kernel.org
Fixes: fa642f0883 ("openvswitch: Derive IP protocol number for IPv6 later frags")
Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments
Signed-off-by: Rosemarie O'Riorden <roriorden@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 8a59f9d1e3 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to
the new tcp_bpf_update_proto() function. I'm guessing that this
was done to allow creating psocks for non-inet sockets.
Unfortunately the destruction path for psock includes the ULP
unwind, so we need to fail the sk_psock_init() itself.
Otherwise if ULP is already present we'll notice that later,
and call tcp_update_ulp() with the sk_proto of the ULP
itself, which will most likely result in the ULP looping
its callbacks.
Fixes: 8a59f9d1e3 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 69135c572d.
This commit was just papering over the issue, ULP should not
get ->update() called with its own sk_prot. Each ULP would
need to add this check.
Fixes: 69135c572d ("net/tls: fix tls_sk_proto_close executed repeatedly")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following sequence currently causes a driver bug warning
when using virtio_net:
# ip link set eth0 up
# echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
<resume>
# ip link set eth0 down
Missing register, driver bug
WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
Call trace:
xdp_rxq_info_unreg+0x58/0x60
virtnet_close+0x58/0xac
__dev_close_many+0xac/0x140
__dev_change_flags+0xd8/0x210
dev_change_flags+0x24/0x64
do_setlink+0x230/0xdd0
...
This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().
Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.
Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up.
Fixes: 754b8a21a9 ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-21
This series contains updates to ice driver only.
Marcin fixes GTP filters by allowing ignoring of the inner ethertype field.
Wojciech adds VSI handle tracking in order to properly distinguish similar
filters for removal.
Anatolii removes ability to set 1000baseT and 1000baseX fields
concurrently which caused link issues. He also disallows setting
channels to less than the number of Traffic Classes which would cause
NULL pointer dereference.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
====================
Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps
Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which
will be significantly lower when 1) ASPM is disabled or 2) SoC package
c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx
speed can reach to ~950Mbps.
According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC",
"DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so
set it to 1b for "DMA is considered idle when there is no Rx or Tx AND
when there are no TLPs indicating that CPU is active detected on the
PCIe link (such as the host executes CSR or Configuration register read
or write operation)" and performing Tx should also fall under "active
CPU on PCIe link" case.
In addition to that, commit b6e0c419f0 ("igb: Move DMA Coalescing init
code to separate function.") seems to wrongly changed from enabling
E1000_PCIEMISC_LX_DECISION to disabling it, also fix that.
Fixes: b6e0c419f0 ("igb: Move DMA Coalescing init code to separate function.")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current mgmt ethernet timeout is set to 100ms. This value is too
big and would slow down any mdio command in case the mgmt ethernet
packet have some problems on the receiving part.
Reduce it to just 5ms to handle case when some operation are done on the
master port that would cause the mgmt ethernet to not work temporarily.
Fixes: 5950c7c0a6 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220621151633.11741-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was discovered that the Documentation lacks of a fundamental detail
on how to correctly change the MAX_FRAME_SIZE of the switch.
In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the
switch panics and cease to send any packet. This cause the mgmt ethernet
system to not receive any packet (the slow fallback still works) and
makes the device not reachable. To recover from this a switch reset is
required.
To correctly handle this, turn off the cpu ports before changing the
MAX_FRAME_SIZE and turn on again after the value is applied.
Fixes: f58d2598cf ("net: dsa: qca8k: implement the port MTU callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220621151122.10220-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I've been contributing and reviewing patches for ptp_ocp driver for
some time and I'm taking care of it's github mirror. On Jakub's
suggestion, I would like to step forward and become a maintainer for
this driver. This patch adds a dedicated entry to MAINTAINERS.
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220621233131.21240-1-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For DCN20 and above, the code that actually hooks up the provided
input_color_space got lost at some point.
Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+.
Tested using Steam Remote Play Together + gamescope.
Update other DCNs the same wasy DCN1.x was updates in
commit a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Fixes: a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
The function currently skips overriding the drive
settings of the first lane.
[How]
Change for loop to start at 0 instead of 1.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Linus Torvalds