drivers/mfd/kempld-core.c:556:36: warning: unused variable 'kempld_acpi_table' [-Wunused-const-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fixes the following randconfig build error:
ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe':
simple-mfd-i2c.c:(.text+0x48): undefined reference to `__devm_regmap_init_i2c'
ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_init':
simple-mfd-i2c.c:(.init.text+0x14): undefined reference to `i2c_register_driver'
ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_exit':
simple-mfd-i2c.c:(.exit.text+0xd): undefined reference to `i2c_del_driver'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Build this driver on another platforms if COMPILE_TEST=y. Another
drivers may depend on this, for example leds-asic3.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Recent Kontron COMe modules identify the PLD device using the hardware
id KEM0001 in the ACPI table.
This patch adds support for probing the device using the HID and also
retrieving the resources.
As this is not available for all products, the DMI based detection still
needs to be around for older systems. It is executed if no matching ACPI
HID is found during registering the platform driver or no specific
device id is forced.
If a device is detected using ACPI and no resource information is
available, the default io resource is used.
Forcing a device id with the force_device_id parameter and therefore
manually generating a platform device takes precedence over ACPI during
probing.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch implements the basic functions of the BMC chip for some Intel
FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the
Intel MAX 10 CPLD.
This BMC chip is connected to the FPGA by a SPI bus. To provide direct
register access from the FPGA, the "SPI slave to Avalon Master Bridge"
(spi-avmm) IP is integrated in the chip. It converts encoded streams of
bytes from the host to the internal register read/write on the Avalon
bus. So This driver uses the regmap-spi-avmm for register accessing.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for the LP87524B/J/P-Q1 Four 4-MHz Buck Converter. This is a
variant of the LP87565 having 4 single-phase outputs and up to 10 A of
total output current.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This file does not make use of it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This code should clean up if sm501_init_dev() fails.
Fixes: b6d6454fdb ("[PATCH] mfd: SM501 core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The name allocated for the regmap_config structure is freed
pretty early, right after the registration of the MMIO region.
Unfortunately, that doesn't follow the life cycle that debugfs
expects, as it can access the name field long after the free
has occurred.
Move the free on the error path, and keep it forever otherwise.
Fixes: e15d7f2b81 ("mfd: syscon: Use a unique name with regmap_config")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When changing to use suspend-to-idle to save power, the PMIC irq can not
wakeup the system due to lack of wakeup capability, which will cause
the sub-irqs (such as power key) of the PMIC can not wake up the system.
Thus we can add the wakeup capability for PMIC irq to solve this issue,
as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be
a wakeup source.
Reported-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Tested-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add PCI IDs for Lakefield to the list of supported UARTs.
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This converts the DaVinci DM355EVM LEDs to use GPIO descriptor look-ups.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver provides access to the EC RAM of said embedded controller
attached to the I2C bus as well as optionally supporting its slightly weird
power-off/restart protocol.
A particular implementation of the EC firmware can be identified by a
model byte. If this driver identifies the Dell Ariel platform, it
registers the appropriate cells.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When testing with !OF, the build system reports:
>> drivers/mfd/khadas-mcu.c:125:34: warning: unused variable 'khadas_mcu_of_match' [-Wunused-const-variable]
static const struct of_device_id khadas_mcu_of_match[] = {
^
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The RN5T618 and RC5T619 both have a charger and a fuel gauge, so add
a subdevice for it. According to drivers in the wild, things
should be at least similar, but since it is not tested, add it
only to the RC5T619.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the core support for the board management controller found on the
SMARC-sAL28 board.
Also add a virtual symbol which pulls in the simple-mfd-i2c driver and
provide a common symbol on which the subdevice drivers can depend on.
At the moment, this controller is used on the Kontron SMARC-sAL28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are I2C devices which contain several different functions but
doesn't require any special access functions. For these kind of drivers
an I2C regmap should be enough.
Create an I2C driver which creates an I2C regmap and enumerates its
children. If a device wants to use this as its MFD core driver, it has
to add an individual compatible string. It may provide its own regmap
configuration.
Subdevices can use dev_get_regmap() on the parent to get their regmap
instance.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match
devices with the correct of_nodes") changed the semantics for disabled
devices in mfd_add_device(). Instead of silently ignoring a disabled
child device, an error was returned. On receipt of the error
mfd_add_devices() the precedes to remove *all* child devices and
returns an all-failed error to the caller, which will inevitably fail
the parent device as well.
This patch reverts back to the old semantics and ignores child devices
which are disabled in Device Tree.
Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The pdev.mfd_cell is released by platform_device_release(), which is
invoked by platform_device_unregister(). Hence mfd_remove_devices_fn()
shouldn't release the cell variable. The double-free bug is reported KASAN
during of MFD driver module removal.
Fixes: 466a62d764 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
- New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
- Driver Removal
- Remove unused driver for TI's SMSC ECE1099
- New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
- New Functionality
- Add support for AXP803 to be probed by I2C
- Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes; stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller
- Enabled Regmap 'fast I/O'; stm32-lptimer
- Change BUG_ON to WARN_ON; arizona-core
- Remove superfluous code/initialisation; madera, max14577
- Trivial formatting/spelling issues; madera-core, madera-i2c, da9055, max77693-private
- Switch to of_platform_populate(); sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros; lm3533-ctrlbank
- Disable IRQs on suspend; motorola-cpcap
- Clean-up error handling; intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices; madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique; syscon
- Bug Fixes
- Properly 'put' clock on unbind and error; arizona-core
- Fix revision handling; da9063
- Fix 'assignment of read-only location' error; kempld-core
- Avoid using the Regmap API when atomic; rn5t618
- Redefine volatile register description; rn5t618
- Use locking to protect event handler; dln2
-----BEGIN PGP SIGNATURE-----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=X/Zn
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
The DT node full name is currently being used in regmap_config
which in turn is used to create the regmap debugfs directories.
This name however is not guaranteed to be unique and the regmap
debugfs registration can fail in the cases where the syscon nodes
have the same unit-address but are present in different DT node
hierarchies. Replace this logic using the syscon reg resource
address instead (inspired from logic used while creating platform
devices) to ensure a unique name is given for each syscon.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The event handler loop must be run with interrupts disabled.
Otherwise we will have a warning:
[ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
[ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
[ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
...
[ 1970.946994] Call Trace:
[ 1970.949446] <IRQ>
[ 1970.951471] handle_irq_event_percpu+0x2c/0x80
[ 1970.955921] handle_irq_event+0x23/0x43
[ 1970.959766] handle_simple_irq+0x57/0x70
[ 1970.963695] generic_handle_irq+0x42/0x50
[ 1970.967717] dln2_rx+0xc1/0x210 [dln2]
[ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
[ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0
[ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0
[ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0
...
Recently xHCI driver switched to tasklets in the commit 36dc01657b
("usb: host: xhci: Support running urb giveback in tasklet context").
The handle_irq_event_* functions are expected to be called with interrupts
disabled and they rightfully complain here because we run in tasklet context
with interrupts enabled.
Use a event spinlock to protect event handler from being interrupted.
Note, that there are only two users of this GPIO and ADC drivers and both of
them are using generic_handle_irq() which makes above happen.
Fixes: 338a128142 ("mfd: Add support for Diolan DLN-2 devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current unbinding process for Madera has some issues. The trouble
is runtime PM is disabled as the first step of the process, but
some of the drivers release IRQs causing regmap IRQ to issue a
runtime get which fails. To allow runtime PM to remain enabled during
mfd_remove_devices, the DCVDD regulator must remain available. In
the case of external DCVDD's this is simple, the regulator can simply
be disabled/put after the call to mfd_remove_devices. However, in
the case of an internally supplied DCVDD the regulator needs to be
released after the other MFD children depending on it.
Use the new MFD mfd_remove_devices_late functionality to split
the DCVDD regulator off from the other drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently, the only way to remove MFD children is with a call to
mfd_remove_devices, which will remove all the children. Under
some circumstances it is useful to remove only a subset of the
child devices. For example if some additional clean up is required
between removal of certain child devices.
To accomplish this a level field is added to mfd_cell, the normal
mfd_remove_devices is modified to not remove devices that are set
to a higher level and a corresponding mfd_remove_devices_late
function is added to remove those children.
See further discussion at:
https://lore.kernel.org/lkml/20200616075834.GF2608702@dell/
Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The variable current_bits is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Battery status changes dynamically, so the corresponding registers
need to be considered volatile. Affected registers are:
- fuel gauge
- battery status
- battery interrupt
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The AXP803 can be used both using the RSB proprietary bus, or a more
traditional I2C bus.
Let's add that possibility.
Signed-off-by: Frank Lee <frank@allwinnertech.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This update adds new regmap tables to support the latest DA silicon
which will automatically be selected based on the chip and variant
information read from the device.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current implementation performs checking in the i2c_probe()
function of the variant_code but does this immediately after the
containing struct has been initialised as all zero. This means the
check for variant code will always default to using the BB tables
and will never select AD. The variant code is subsequently set
by device_init() and later used by the RTC so really it's a little
fortunate this mismatch works.
This update adds raw I2C read access functionality to read the chip
and variant/revision information (common to all revisions) so that
it can subsequently correctly choose the proper regmap tables for
real initialisation.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Otherwise we get spammed with errors on resume after rtcwake:
cpcap-core spi0.0: Failed to read IRQ status: -108
Note that rtcwake is still capable of waking up the system with
this patch.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This MFD driver has no user. The keypad driver of this device never made
it into the kernel. Therefore, this driver is useless. Remove it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently, when a child platform device (sometimes referred to as a
sub-device) is registered via the Multi-Functional Device (MFD) API,
the framework attempts to match the newly registered platform device
with its associated Device Tree (OF) node. Until now, the device has
been allocated the first node found with an identical OF compatible
string. Unfortunately, if there are, say for example '3' devices
which are to be handled by the same driver and therefore have the same
compatible string, each of them will be allocated a pointer to the
*first* node.
An example Device Tree entry might look like this:
mfd_of_test {
compatible = "mfd,of-test-parent";
#address-cells = <0x02>;
#size-cells = <0x02>;
child@aaaaaaaaaaaaaaaa {
compatible = "mfd,of-test-child";
reg = <0xaaaaaaaa 0xaaaaaaaa 0 0x11>,
<0xbbbbbbbb 0xbbbbbbbb 0 0x22>;
};
child@cccccccc {
compatible = "mfd,of-test-child";
reg = <0x00000000 0xcccccccc 0 0x33>;
};
child@dddddddd00000000 {
compatible = "mfd,of-test-child";
reg = <0xdddddddd 0x00000000 0 0x44>;
};
};
When used with example sub-device registration like this:
static const struct mfd_cell mfd_of_test_cell[] = {
OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 0, "mfd,of-test-child"),
OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child"),
OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child")
};
... the current implementation will result in all devices being allocated
the first OF node found containing a matching compatible string:
[0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0
[0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@aaaaaaaaaaaaaaaa
[0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1
[0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa
[0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2
[0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@aaaaaaaaaaaaaaaa
After this patch each device will be allocated a unique OF node:
[0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0
[0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@aaaaaaaaaaaaaaaa
[0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1
[0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@cccccccc
[0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2
[0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@dddddddd00000000
Which is fine if all OF nodes are identical. However if we wish to
apply an attribute to particular device, we really need to ensure the
correct OF node will be associated with the device containing the
correct address. We accomplish this by matching the device's address
expressed in DT with one provided during sub-device registration.
Like this:
static const struct mfd_cell mfd_of_test_cell[] = {
OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child", 0xdddddddd00000000),
OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child", 0xaaaaaaaaaaaaaaaa),
OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 3, "mfd,of-test-child", 0x00000000cccccccc)
};
This will ensure a specific device (designated here using the
platform_ids; 1, 2 and 3) is matched with a particular OF node:
[0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0
[0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@dddddddd00000000
[0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1
[0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa
[0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2
[0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@cccccccc
This implementation is still not infallible, hence the mention of
"best effort" in the commit subject. Since we have not *insisted* on
the existence of 'reg' properties (in some scenarios they just do not
make sense) and no device currently uses the new 'of_reg' attribute,
we have to make an on-the-fly judgement call whether to associate the
OF node anyway. Which we do in cases where parent drivers haven't
specified a particular OF node to match to. So there is a *slight*
possibility of the following result (note: the implementation here is
convoluted, but it shows you one means by which this process can
still break):
/*
* First entry will match to the first OF node with matching compatible
* Second will fail, since the first took its OF node and is no longer available
* Third will succeed
*/
static const struct mfd_cell mfd_of_test_cell[] = {
OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child"),
OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child", 0xaaaaaaaaaaaaaaaa),
OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 3, "mfd,of-test-child", 0x00000000cccccccc)
};
The result:
[0.753869] mfd-of-test-parent mfd_of_test: Registering 3 devices
[0.756597] mfd-of-test-child: Failed to locate of_node [id: 2]
[0.759999] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1
[0.760314] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa
[0.760908] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2
[0.761183] mfd-of-test-child mfd-of-test-child.2: No OF node associated with this device
[0.761621] mfd-of-test-child mfd-of-test-child.3: Probing platform device: 3
[0.761899] mfd-of-test-child mfd-of-test-child.3: Using OF node: child@cccccccc
We could code around this with some pre-parsing semantics, but the
added complexity required to cover each and every corner-case is not
justified. Merely patching the current failing (via this patch) is
already working with some pretty small corner-cases. Other issues
should be patched in the parent drivers which can be achieved simply
by implementing OF_MFD_CELL_REG().
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit 711419e504 ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a4 fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a4 ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct axp20x_i2c_acpi_match becomes defined by unused.
This squashes the current W=1 kernel builds warning:
drivers/mfd/axp20x-i2c.c:82:36: warning: ‘axp20x_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
'i / pdata->num_irqs' always equates to 0 and 'BIT(i % pdata->num_irqs)'
always ends up being BIT(i) here, so make that clearer in the code. If
the code base needs to support more than 32 IRQs in the future, this will
have to be reworked, but lets just keep it simple for as long as we can.
This fixes the following W=1 warning:
drivers/mfd/sprd-sc27xx-spi.c:255 sprd_pmic_probe() debug: sval_binop_unsigned: divide by zero
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Suggested-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Argument 'received' was incorrectly named by its struct type 'completion'
instead of its name.
Fixes the following W=1 warning:
drivers/mfd/rave-sp.c:107: warning: Function parameter or member 'received' not described in 'rave_sp_reply'
Cc: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Kerneldoc syntax is used, but not complete.
Descriptions are required for all arguments.
Fixes the following W=1 build warning:
drivers/mfd/si476x-cmd.c:907: warning: Function parameter or member 'report' not described in 'si476x_core_cmd_fm_rds_status'
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds