Alienware 15 has CA0132 codec for its onboard sound, but the pin
config and mapping seem quite different from other Creative boards.
This patch corrects them, at least, for providing the right headphone
and mic jack notification, as well as removing the non-existing SPDIF
pins.
Even with this fix, not all stuff works perfectly yet, mainly because
of the badly written ca0132 driver code -- it has too many implicit
assumptions of pin configs and maps. Nevertheless, this is a small
good step forward.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101981
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The echoaudio locally defines TRUE and FALSE. Not only is this
redundant given that C now has a boolean type it results in lots of
warnings as other headers also define these macros, causing duplicate
definitions. Fix this by removing the local defines and converting all
local users to use the standard C true and false instead, simply
removing the macros is less safe due to implicit inclusion of the other
definitons.
[fixed overlooked replacement of FALSE by tiwai]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enforce correct device sequencing when configuring a new
audio route when there is an existing active audio route(s).
This patch fixed recording noise issue while playback is active.
We have some registers which require the device to be in full shutdown
or to enter full shutdown before the register settings will take effect.
Currently the driver is not shutting down the device when a new audio
route is created. If a new audio route is made active while there is
already an active audio route, then the required register sequencing is
violated. A hardware shutdown toggle when creating a new audio route
corrects the sequencing error. The device must remain in hardware
shutdown for 40ms to allow the internal hardware core to fully shutdown.
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Acked-by: Anish Kumar <anish.kumar@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To manage DSP we need to create processing pipeline and on cleanup destroy
them. So we add create and destroy routines for pipelines The pipelines need
to to be executed so we add pipeline run and stop routines
All these send required IPCs to DSP using IPC routines added earlier
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A module needs to be instantiated and then connected with other modules. On
cleanup we need to disconnect the module.
This is achieved by helpers module init, bind and unbind which are added
here
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC and converter modules are required to do frequency and channel
conversion in DSP. Both take base module configuration and additional SRC
and converter parameters. The helpers here are added to calculate the values
for these modules
Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds helper functions to calculate parameters required for base module
format and copier module. A generic module is modelled by base module.
Copier module is responsible for getting/sending data to FE (host DMAs) and
BE (link HDA DMA, SSP, PDM)
This also ads module pin management helpers which help in finding pins to
use or freeing them up
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of defining own acpi header, use the available acpi
header defined in acpi framework.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sampling rate type needs to be u32 instead of u8, nhlt wav format
description expected u32 for rate, passing u8 will fetch NULL
config in skl_get_ep_blob().
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes a typo in the description for SND_OMAP_SOC_HDMI_AUDIO.
Signed-off-by: Nik Nyby <nikolas@gnu.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are a couple of small driver specific fixes here but the
overwhelming bulk of these changes are fixes to the topology ABI that
has been newly introduced in v4.2. Once this makes it into a release we
will have to firm this up but for now getting enhancements in before
they've made it into a release is the most expedient thing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVxJsBAAoJECTWi3JdVIfQHUIH/2NeQyG7bL3TSIm0qK9RdmaT
UrWyGm6AwhOrg9j9jnZkXag1v4Fsmo4nnslaDbmCKaWJPs7ol94NuWJK7z3He3nr
47yxl2m8OhxsS7aBDACa4gJFQce+JSjKs1ADnKR7QzY9c1/nTAWLO/LE/I5Ca18u
tZg77hviip2ftfLYdNXDZvz3HzuCcRnIouc4izTs16DXwU3aYpqcctFrcqU3nNmp
/+5zPwIoLA7KDwPqdYhSPNRuCnFtjVbI8hTzq+aWFlxFBZYlKmSCTSwpCN2aQDgF
1oCOP4dlv7s9Xavd2TOMJ8g3Fuyb/gjX2DhIEm7QCYxwBxdkpwm0na6gMrRJqsg=
=NEOq
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.2
There are a couple of small driver specific fixes here but the
overwhelming bulk of these changes are fixes to the topology ABI that
has been newly introduced in v4.2. Once this makes it into a release we
will have to firm this up but for now getting enhancements in before
they've made it into a release is the most expedient thing.
Currently the TLV topology structure is targeted at only supporting the
DB scale data. This patch extends support for the other TLV types so they
can be easily added at a later stage.
TLV structure is moved to common topology control header since it's a
common field for controls and can be processed in a general way.
Users must set a proper access flag for a control since it's used to
decide if the TLV field is valid and if a TLV callback is needed.
Removed the following fields from topology TLV struct:
- size/count: type can decide the size.
- numid: not needed to initialize TLV for kcontrol.
- data: replaced by the type specific struct.
Added TLV structure to generic control header and removed TLV structure
from mixer control.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A lot of small fixes here, a few to the core:
- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVsnNFAAoJECTWi3JdVIfQH9cH/1ddueDFikvXSCyntuJcHAwJ
a7X5kCVdegMnaMK5fnAbTlJBpDIX/F1UBvsFQQ38eKWeneP44XnkXeh/32fGJzQO
L730dqy0tkgQdWJkQg0yxaP5/k0BfhnXeRc3ATUG3LBgUBrWRYLTIvaM+G+H3Kf5
K88QL7cKmeY0Kt6+cms3nnBj9x5oFgbHIW7Y3K/pza+XPVecZ7N3/5gpV+VQDUXh
Oz3cZOsC5h4+IpxkOrLXY7zgLvrt/HfRTO2QF/3Ntub81anAk190pVAquM+r/CTn
tQ3sPNGLglQ4VRXNP6yBKJOp5CUTBLt5XWlJ+Kg9p2OiiuOPla4wkhuGDS5AM64=
=nJJl
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.2-rc3' into asoc-fix-topology
ASoC: Fixes for v4.2
A lot of small fixes here, a few to the core:
- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes
Some widgets may need sorting within, So add this support in topology.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing implementation checks all divider values and tracks
'red' proximity value for the frequency.
But as divider array is monotonically increasing the first
divider that gives DMIC rate in 3MHz range is the best one
we should use. No need for 'red' zone tracking.
Additionally make sure that DMIC frequency is higher 1MHz.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the aoa-soundbus framework to use dev_pm_ops rather than the
deprecated legacy suspend and resume callbacks.
Since there isn't anything special to do at the bus level the bus driver
does not have to implement any callbacks. The device driver core will
automatically pick up and execute the device's PM ops.
As there is only a single aoa-soundbus driver implementing suspend and
resume, update both the core and driver at the same time to avoid
unnecessary code churn.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces the use of managed resource function
devm_clk_get instead of clk_get and removes corresponding calls
to clk_put in the probe and remove functions.
To be compatible with the change various gotos are replaced with
direct returns, and unneeded labels are dropped.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When .max_register is set and .writeable_reg is not implement, registers
between 0 and .max_register are writeable. This is the same as current
implementation of wm8753_writeable(), so just drop implementation for
.writeable_reg callback.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When .max_register is set and .writeable_reg is not implement, registers
between 0 and .max_register are writeable. This is the same as current
implementation of wm8731_writeable(), so just drop implementation for
.writeable_reg callback.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
For TLVs with only a single entry it is not necessary to use a range
container. Use DECLARE_TLV_DB_LINEAR() directly instead of a combination of
TLV_DB_RANGE_HEAD() and TLV_DB_LINEAR_ITEM().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
For TLVs with only a single entry it is not necessary to use a range
container. Use DECLARE_TLV_DB_SCALE() directly instead of a combination of
TLV_DB_RANGE_HEAD() and TLV_DB_SCALE_ITEM().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
For TLVs with only a single entry it is not necessary to use a range
container. Use DECLARE_TLV_DB_SCALE() directly instead of a combination of
TLV_DB_RANGE_HEAD() and TLV_DB_SCALE_ITEM().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD()
that it automatically calculates the number of items in the TLV and is
hence less prone to manual error.
Generate using the following coccinelle script
// <smpl>
@@
declarer name DECLARE_TLV_DB_RANGE;
identifier tlv;
constant x;
@@
-unsigned int tlv[] = {
- TLV_DB_RANGE_HEAD(x),
+DECLARE_TLV_DB_RANGE(tlv,
...
-};
+);
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
It turned out that there are three variants of pin config values of
NID 0x17 on Dell laptops with ALC3266 (alias of ALC298): 0x90170110,
0x90170140 and 0x90170150. The first two have been already covered by
commits 703867e2f2 and 977e627684, so this commit adds the missing
last entry.
While we're at it, rearrange the three entries in the order of pincfg
values.
Reported-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fixup ALC292_FIXUP_DISABLE_AAMIX can fix the white noise of
the headphone on this Dell machine.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on from it.
Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.
As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a
quirk to transfer a first packet with 0x02 in its dbc field. This causes
ALSA Fireworks driver to detect discontinuity. In this case, firmware
version 5.7.0, 5.7.3 and 5.8.0 are used.
Payload CIP CIP
quadlets header1 header2
02 00050002 90ffffff <-
42 0005000a 90013000
42 00050012 90014400
42 0005001a 90015800
02 0005001a 90ffffff
42 00050022 90019000
42 0005002a 9001a400
42 00050032 9001b800
02 00050032 90ffffff
42 0005003a 9001d000
42 00050042 9001e400
42 0005004a 9001f800
02 0005004a 90ffffff
(AudioFire2 with firmware version 5.7.)
$ dmesg
snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02
These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface
Pack series uses the same ARM binary as their firmware. Thus, this
quirk may be observed among them.
This commit adds a new member for AMDTP structure. This member represents
the value of dbc field in a first AMDTP packet. Drivers can set it with
a preferred value according to model's quirk.
Tested-by: Johannes Oertei <johannes.oertel@uni-due.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 9c6893e0be.
The fix is superseded by the next commit as a better implementation
for supporting AudioFire2/AudioFire4/AudioFirePre8 quirks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new Dell laptop with ALC3266 can't use internal microphone to
record. Also, the 3 ring headset mic doesn't work on it. For src of
patch_realtek.c, only the pin cfg of Nid 0x17 is different, so the
Nid 0x17 is added into pin quirk, and others are defined to macro
ALC298_STANDARD_PINS in common use.
Codec: Realtek ALC3266
Vendor Id: 0x10ec0298
Subsystem Id: 0x102806e5
BugLink: https://bugs.launchpad.net/bugs/1481575
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_hdac_chip_readl return can never be less than zeros,
so no point in checking for the return value
This fixes following static checker warnings in
snd_hdac_ext_bus_parse_capabilities
sound/hda/ext/hdac_ext_controller.c:47
snd_hdac_ext_bus_parse_capabilities()
warn: unsigned 'offset' is never less than zero.
sound/hda/ext/hdac_ext_controller.c:54
snd_hdac_ext_bus_parse_capabilities()
warn: unsigned 'cur_cap' is never less than zero.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes issue in assigning host stream in case of
decoupled mode. The check to verify if the stream is already
in use was wrong so fix that
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I2S2_DAC pin can be used for I2S or GPIO. We should set it as GPIO
if we use GPIO5 as DMIC1 data pin.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To cleanup the pin_quirk table:
- rewrite the pin_config_match(), comparing all pins on the machine
with the corresponding pins in the quirk table.
- remove all 0x4xxxxxxx pin configurations from pin_quirk table
- after removing the 0x4xxxxxxx pin configurations, some pin tables
are exactly same, so removing the redudant pin tables.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes the following warning, that is seen with gcc 5.1:
warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses].
Signed-off-by: Tomer Barletz <barletz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So technically there's no need for a driver to export
the OF table since currently it's not used.
In fact, the I2C device ID table is mandatory for I2C drivers since
a i2c_device_id is passed to the driver's probe function even if the
I2C core used the OF table to match the driver.
And since the I2C core uses different tables, OF-only drivers needs to
have duplicated data that has to be kept in sync and also the dev node
compatible manufacturer prefix is stripped when reporting the MODALIAS.
To avoid the above, the I2C core behavior may be changed in the future
to not require an I2C device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table to prevent
breaking module autoloading if that happens.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this
seems not working correctly, a fix for pin NID 0x15 is needed in
addition. It's equivalent with the fixup for MacBook Air 1,1, so use
this instead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131
Reported-and-tested-by: Jeffery Miller <jefferym@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PM ops could be triggered before HDA is done initializing
and cause PM to set HDA controller to D3Hot. This can result
in "CORB reset timeout#2, CORBRP = 65535" and "no codecs
initialized". Additionally, PM ops can be triggered before
azx_probe_continue finishes (async probe). This can result
in a NULL deref kernel crash.
To fix this, avoid PM ops if !chip->running.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The readable registers are in consecutive ranges:
0x01 ~ 0x03, 0x0D ~ 0xD1, 0xFF
So simplify the implementation by specifying a range of consecutive values
in a single case label.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
tx_substeam is accessed using the RCU API and hence should have the __rcu
annotation. Fixes the following sparse warnings:
sound/soc/xtensa/xtfpga-i2s.c:165:24: error: incompatible types in
comparison expression (different address spaces)
sound/soc/xtensa/xtfpga-i2s.c:165:24: error: 'struct snd_pcm_substream
[noderef] <asn:4>*' versus
sound/soc/xtensa/xtfpga-i2s.c:165:24: error: 'struct snd_pcm_substream *'
sound/soc/xtensa/xtfpga-i2s.c:255:24: error: incompatible types in
comparison expression (different address spaces)
sound/soc/xtensa/xtfpga-i2s.c:255:24: error: 'struct snd_pcm_substream
[noderef] <asn:4>*' versus
sound/soc/xtensa/xtfpga-i2s.c:255:24: error: 'struct snd_pcm_substream *'
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
uni_player_dai_ops is not used outside of this file so it should be static.
Fixes the following sparse warning:
sound/soc/sti/uniperif_player.c:959:30: warning: symbol
'uni_player_dai_ops' was not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
base referes to a iomem region, so it should have the __iomem annotation.
Fixes the following warnings from sparse:
sound/soc/sti/sti_uniperif.c:169:19: warning: incorrect type in
assignment (different address spaces)
sound/soc/sti/sti_uniperif.c:169:19: expected void *base
sound/soc/sti/sti_uniperif.c:169:19: got void [noderef] <asn:2>*
sound/soc/sti/uniperif_player.c:104:18: warning: incorrect type in
argument 1 (different address spaces)
sound/soc/sti/uniperif_player.c:104:18: expected void const volatile
[noderef] <asn:2>*addr
sound/soc/sti/uniperif_player.c:104:18: got void *
[...]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_of_parse_ctu() is not used outside this file so it can be static.
Fixes the following sparse warning:
sound/soc/sh/rcar/ctu.c:72:6: warning: symbol 'rsnd_of_parse_ctu' was
not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ipq806x_data is not used outside this file, so it can be static.
Fixes the following sparse warning:
sound/soc/qcom/lpass-ipq806x.c:76:22: warning: symbol 'ipq806x_data'
was not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
SOC_ENUM_SINGLE_DECL() already includes a const, drop the extra const.
Fixes the following sparse warning:
sound/soc/codecs/wm8804.c:101:14: warning: duplicate const
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initialization for sst_byt.dev at init stage, which fix the
'NULL device *' warning issues.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initialization for sst_hsw.dev at init stage, which fix the
'NULL device *' warning issues.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The max8983_access table is used for look up readable/writable
attributes of registers. The writable registers are mostly in continuous
ranges, so we can replace max8983_access table by using case range.
The read fields are all 0, so just drop implement of .readable callback.
Also set .max_register setting.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98095_access table is used for look up readable/writable
attributes of registers. The readable/writable/volatile registers are
mostly in continuous ranges, so we can replace the max98095_access table
entirely by using case range.
Below is a summary of the readable/writeable/volatile registers:
readable registers:
0x01 ~ 0x97, 0xFF
writeable registers:
0x0F ~ 0x97
volatile registers:
0x00 ~ 0x0E, 0x98 ~ 0xFF
This patch reworks the implement for .readable and .volatile and also add
implementation for .writable callback.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98088_access table is used for look up readable/writable/volatile
attributes of registers. The readable/writable/volatile registers are
mostly in continuous ranges, so we can replace the max98088_access table
entirely by using case range.
Below is a summary of the readable/writeable/volatile registers:
readable registers:
0x00 ~ 0xC9, 0xFF
writeable registers:
0x03 ~ 0xC9
volatile registers:
0x00 ~ 0x03, 0xFF
Note, 0x00 should be read-only according to the datasheet.
This patch reworks the implement for .readable and .volatile and also add
implementation for .writable callback.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper iterator macros for iterating over the source and sink paths of
widget. This will make it easier to change the implementation later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
When running dapm_dai_get_connected_widgets() currently in
is_connected_{input,output}_ep() for each widget that gets added the array
is resized and the code also loops over all existing entries to avoid
adding a widget multiple times.
The former can be avoided by collecting the widgets in a linked list and
only once we have all widgets allocate the array.
The later can be avoided by changing when the widget is added. Currently it
is added when walking the neighbor lists of a widget. Since a widget can be
neighbors with multiple other widgets it could get added twice and hence
the check is necessary. But the main body of is_connected_{input,output}_ep
is guaranteed to be only executed at most once per widget. So adding the
widget to the list at the beginning of the function automatically makes
sure that each widget gets only added once. The only difference is that
using this method the starting point itself will also end up on the list,
but it can easily be skipped when creating the array.
Overall this reduces the code size and speeds things slightly up.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
list_first_entry() always returns non NULL and since the code previously
checked that list is not empty it will also be a valid pointer. Furthermore
a path has always a sink or a source widget. So both checks are redundant
and can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's safe to call gpiod_set_value() with NULL desc.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If devm_gpiod_get_optional() return ERR_PTR, it means something wrong
so request gpio fails. We had better return error in such case.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the correct dB ranges of Bose Companion 5 and Drangonfly DAC 1.2.
Signed-off-by: Yao-Wen Mao <yaowen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell Vostro 5480 (1028:069a) needs the very same quirk used for Vostro
5470 model to make bass speakers properly working.
Reported-and-tested-by: Paulo Roberto de Oliveira Castro <p.oliveira.castro@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new Dell laptop with codec 256 can't detect headset mic when
headset was inserted on the machine. From alsa-info, we check
init_pin_configs and need to define the new register value for pin
0x1d & 0x1e because the original macro ALC256_STANDARD_PINS can't
match pin definition. Also, the macro ALC256_STANDARD_PINS is
simplified by removing them. This makes headset mic works on laptop.
Codec: Realtek ALC256
Vendor Id: 0x10ec0256
Subsystem Id: 0x102806f2
BugLink: https://bugs.launchpad.net/bugs/1478497
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Toshiba Satellite S50D has another model with a different PCI SSID
(1179:fa93) while the previous fixup was for 1179:fa91. Adjust the
fixup entry with SND_PCI_QUIRK_MASK() to match with both devices.
Reported-by: Tim Sample <timsample@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on.
Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.
AudioFire2 has a quirk to transfer a first packet with non-zero in
its dbc field. This causes ALSA Fireworks driver to detect discontinuity.
As long as I investigated, firmware 5.7, 5.7.6 and 5.8 have this quirk.
This commit adds a support for the quirk to handle AudioFire2 packets.
For safe, CIP_SKIP_INIT_DBC_CHECK is applied to all versions of
AudioFire2's firmwares.
02 00050002 90ffffff <-
42 0005000a 90013000
42 00050012 90014400
42 0005001a 90015800
02 0005001a 90ffffff
42 00050022 90019000
42 0005002a 9001a400
42 00050032 9001b800
02 00050032 90ffffff
42 0005003a 9001d000
42 00050042 9001e400
42 0005004a 9001f800
02 0005004a 90ffffff
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the headset was plugged in the Dell desktop, the mic of headset
can't be detected and workable.
According to the alsa-info, we found the differece between alsa and
init_pin_configs on the machine, so we need to add the pin configs to
make headset work.
Codec: Realtek ALC3234
Vendor Id: 0x10ec0255
Subsystem Id: 0x102806bb
BugLink: https://bugs.launchpad.net/bugs/1477900
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that we have nested checks for "spdif_present". It
turns out the current behavior isn't correct, we should remove the first
check and keep the second.
Fixes: 1077a02481 ('ALSA: hda - Use generic parser for Cirrus codec driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A lot of small fixes here, a few to the core:
- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVsnNFAAoJECTWi3JdVIfQH9cH/1ddueDFikvXSCyntuJcHAwJ
a7X5kCVdegMnaMK5fnAbTlJBpDIX/F1UBvsFQQ38eKWeneP44XnkXeh/32fGJzQO
L730dqy0tkgQdWJkQg0yxaP5/k0BfhnXeRc3ATUG3LBgUBrWRYLTIvaM+G+H3Kf5
K88QL7cKmeY0Kt6+cms3nnBj9x5oFgbHIW7Y3K/pza+XPVecZ7N3/5gpV+VQDUXh
Oz3cZOsC5h4+IpxkOrLXY7zgLvrt/HfRTO2QF/3Ntub81anAk190pVAquM+r/CTn
tQ3sPNGLglQ4VRXNP6yBKJOp5CUTBLt5XWlJ+Kg9p2OiiuOPla4wkhuGDS5AM64=
=nJJl
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.2
A lot of small fixes here, a few to the core:
- Fix for binding DAPM stream widgets on devices with prefixes assigned
to them
- Minor fixes for the newly added topology interfaces
- Locking and memory leak fixes for DAPM
- Driver specific fixes
CS4265_INT_STATUS was missed in cs4265_readable_register, fix it.
The register 0x01 ~ 0x12 are readable, use
CS4265_CHIP_ID ... CS4265_SPDIF_CTL2 syntax for better readability.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The settings in current code does not match the datasheet, fix it.
DAC Control - Address 03h
DAC Digital Interface Format (Bits 5:4)
DAC_DIF1 DAC_DIF0 Description
0 0 Left Justified, up to 24-bit data (default)
0 1 I²S, up to 24-bit data
1 0 Right-Justified, 16-bit Data
1 1 Right-Justified, 24-bit Data
Transmitter Control 2 - Address 12h
Transmitter Digital Interface Format (Bits 7:6)
Tx_DIF1 Tx_DIF0 Description Format Figure
0 0 Left Justified, up to 24-bit data (default)
0 1 I²S, up to 24-bit data
1 0 Right-Justified, 16-bit Data
1 1 Right-Justified, 24-bit Data
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Added INT343B ACPI ID for the SSM4567 codec
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: M Naveen <naveen.m@intel.com>
Signed-off-by: M R Sathya Prakash <sathya.prakash.m.r@intel.com>
Acked-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This checking is done by regmap_get_i2c_bus() which is called in
devm_regmap_init_i2c().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Slightly improve the logic for de-emphasis sampling rate selection by break
out the loop if the rate is matched.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The de-emphasis sampling rate selection is controlled by BIT[3:4] of
PCM1681_DEEMPH_CONTROL register. Do proper left shift to set it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Belisko <marek.belisko@streamunlimited.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The ALSA core takes care that all preallocated memory is freed
when the PCM itself is freed. There is no need to do this
manually in the driver.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, rl6231_pll_calc provide a working PLL parameters for
given freq_in and freq_out. However, in some cases it is not the
perfect parameter. For example if freq_in = 19200000 and freq_out
= 24576000, the calculated parameter will gengrate 24.5647 MHz
which is not exactly the same as what we need. But the PLL can
output 24.576 MHz as exactly what we expect if we set the best
PLL parameter.
To improve it, we put the best match parameters in a preset table.
We can search the preset table first, if there is no preset parameter
for the given freq_in and freq_out, we can still calculate a working
PLL parameter.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This helper function will be used by the Skylake driver for dsp and
ipc initialization if processing pipe capability is supported.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Non-HD Audio Endpoint Description table contains the link
configuration information for the DSP. This is specific to Non HDA
links only, like I2s and PDM
Skylake driver will use NHLT table to retrieve the configuration based
on the link type, format, channel and rate. This configuration is
passed to DSP FW
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new snd_ac97_reset() helper and the reset functionality provided by
snd_soc_new_ac97_codec() to perform the device reset rather than
open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new snd_ac97_reset() helper and the reset functionality provided by
snd_soc_new_ac97_codec() to perform the device reset rather than
open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new snd_ac97_reset() helper and the reset functionality provided by
snd_soc_new_ac97_codec() to perform the device reset rather than
open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new snd_ac97_reset() helper and the reset functionality provided by
snd_soc_new_ac97_codec() to perform the device reset rather than
open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new snd_ac97_reset() helper function to perform the reset and
verify the device ID.
Unfortunately the reset can't be done in snd_soc_new_ac97_codec() due to
the special requirements in order to support the non-standard 16-bit slot
mode of the ad1980.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
AC97 devices need to be initially reset before they can be used. Currently
each driver does this on its own.
Add support for resetting the device to core in snd_soc_new_ac97_codec().
If the caller supplies a device ID and device ID mask the function will
reset the device and verify that it has the correct ID, if it does not a
error is returned.
This will allow to remove custom code with similar functionality from
individual drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is currently a lot of code duplication in ASoC drivers regarding the
reset handling of devices. This patch introduces a new generic reset
function in the generic AC'97 framework that can be used to replace most
the custom reset functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Slightly improve the logic for de-emphasis sampling rate selection by break
out the loop if the rate is matched.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The latest valid register is TAS2552_VBAT_DATA.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Dan Murphy<dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's safe to call gpiod_set_value_cansleep() with NULL desc.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
CS42L73_SP_3ST is BIT(7), so the mask field is wrong. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's safe to call gpiod_set_value_cansleep() with NULL desc.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet, the CS35L32_SDOUT_3ST is BIT(3).
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds suspend/resume callbacks, which are common for each DAI.
To be able to continue the last playback/capture after resume
when suspend was done during a playback/capture, in the callbacks
we do backup/restore of registers which were set before prepare stage.
Registers to be backup/restore are defined in a backup list array.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The PWR_DWN is Bit 7, so current code does not set the PWR_DWN bit. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's safe to call gpiod_set_value_cansleep() with NULL desc.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The regmap_write in ssm4567_set_dai_fmt accidentally clears the
TDM_BCLKS field which was set earlier by ssm4567_set_tdm_slot.
This patch fixes it by using regmap_update_bits with proper mask.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Currently, below code actually does not update any bit because
SGTL5000_SMALL_POP is 0.
snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, SGTL5000_SMALL_POP, 1);
The SGTL5000_SMALL_POP should be BIT(0) rather than 0, fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-By: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Without this patch, the headset mic will not work on this machine.
BugLink: https://bugs.launchpad.net/bugs/1476987
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One more Dell laptop with alc293 codec needs
ALC293_FIXUP_DELL1_MIC_NO_PRESENCE, but the pin 0x1e does not match
the corresponding one in the ALC292_STANDARD_PINS. To use this macro
for this machine, we need to remove pin 0x1e from it.
BugLink: https://bugs.launchpad.net/bugs/1476888
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When creating a new widget from a template the name string of the template
is duplicated for the newly created widget. This is necessary because in
some cases the string might be stored on the stack or other volatile
memory locations.
But most of the time the string is static const data, which means it is
possible to use it directly without having to worry that it might get freed
or changed.
Use kstrdup_const() to handle duplicating the string. This function is
capable of detecting whether a string is immutable and if it is returns the
input without duplicating it. This will slightly reduce the runtime memory
footprint of DAPM and also speed up initialization.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_widget_remove_all() has a verbatim copy of an older version of
the widget freeing code from dapm_free_widgets(). Add a new helper function
that takes care of freeing a widget and use it in both places.
This removes the duplicated code and also makes sure that future changes to
the widget freeing code only have to be made in one location.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The kirkwood audio subsystem presents 2 PCM's for one source.
Streaming on a second PCM while the first one is active
cuts this last one.
Then, ending the last stream gives a kernel trap in free_irq().
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a stray '!' which means the condition is never true.
Fixes: f3bd847eb0 ('ASoC: sti: Add uniperipheral dai driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Debug prints are seldom useful and this one has an annoying thing where
it reads one space beyond the end of the array on error.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
84e95355602c("ASoC: rsnd: show debug message for SSI/SRC/DVC connection")
added debug message on rsnd_dai_connect(), but the relationship of
parameter check was absurdity. This patch tidyup it.
It is reported via Smatch/Dan
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit fdb6eb0a12 ("ASoC: dapm: Modify widget stream name according to
prefix") fixed the case where a DAPM route between a DAI widget and a
DAC/ADC/AIF widget with a matching stream name was not created when the
DAPM context was using a prefix.
Unfortunately the patch introduced a few issues on its own like leaking the
dynamically allocated stream name memory and also not checking whether the
allocation succeeded in the first place.
It is also incomplete in that it still does not handle the case where
stream name of the widget is a substring of the stream name of the DAI,
which is explicitly allowed and works fine if no DAPM prefix is used.
Revert the commit and take a slightly different approach to solving the
issue. Instead of comparing the widget's stream name to the name of the DAI
widget compare it to the stream name of the DAI widget. The stream name of
the DAI widget is identical to the name of the DAI widget except that it
wont have the DAPM prefix added. So this approach behaves identical
regardless to whether the DAPM context uses a prefix or not.
We don't have to worry about potentially matching with a widget with the
same stream name, but from a different DAPM context with a different
prefix, since the code already makes sure that both the DAI widget and the
matched widget are from the same DAPM context.
Fixes: fdb6eb0a12 ("ASoC: dapm: Modify widget stream name according to prefix")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Vendor ID 0x10de007d is used by a yet-to-be-named GPU chip.
This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
s390 allmodconfig:
sound/soc/codecs/cs4349.c: In function 'cs4349_i2c_probe':
sound/soc/codecs/cs4349.c:300: error: implicit declaration of function 'devm_gpiod_get_optional'
sound/soc/codecs/cs4349.c:301: error: 'GPIOD_OUT_LOW' undeclared (first use in this function)
sound/soc/codecs/cs4349.c:301: error: (Each undeclared identifier is reported only once
sound/soc/codecs/cs4349.c:301: error: for each function it appears in.)
sound/soc/codecs/cs4349.c:306: error: implicit declaration of function 'gpiod_set_value_cansleep'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct cs4349_platform_data should be defined in a public header in
include/sound/ rather than in sound/soc/codecs folder.
In additional, the platform data support is not properly handled in this
driver so remove it now.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The first valid register index is 1 rather than 0, and the CS4349_CHIPID
is readonly. So set .writeable_reg to avoid writing to these registers.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The explicit call to devm_regulator_put in the probe and remove functions
does not seem to be necessary. In particular, the functions
prcmu_qos_remove_requirement and ux500_msp_i2s_cleanup_msp in the remove
function seem to do nothing that can interfere with devm_regulator_put,
making it safe to allow devm_regulator_put to occur after the end of the
remove function.
Convert the calls to clk_get to devm_clk_get, and remove the corresponding
calls to clk_put in the probe and remove functions.
Replace various gotos by direct returns, and drop unneeded labels.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Mode Control - Register 02h
Digital Interface Format (DIF[2:0]) Bits 6-4
DIF2 DIF1 DIF0 Description
0 0 0 Left-Justified, up to 24-bit data
0 0 1 I²S, up to 24-bit data
0 1 0 Right-Justified, 16-bit data
0 1 1 Right-Justified, 24-bit data
1 0 0 TDM slot 0
1 0 1 TDM slot 1
1 1 0 TDM slot 2
1 1 1 TDM slot 3
The DIF_MASK is 0x70, so current code does not correctly set the DIFx
setting. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->codec does not necessarily point to the CODEC instance for which the
callback was called (e.g. for CODEC<->CODEC or multi-CODEC links). Use
dai->codec instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_get_drvdata() will not return the snd_soc_runtime to which this CODEC
is attached, so the current code will result in undefined behavior.
To fix this just use regmap_update_bits(cs4349->regmap, ...) directly
instead of snd_soc_update_bits(rtd->codec, ...).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is used for rockchip board using a rt5645/rt5650.
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is used for rockchip board using a max98090.
Reviewed-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: zhengxing <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
"ASoC: rt5645: Check if codec is initialized in workqueue handler"
adds a check if codec is NULL in rt5645_irq_detection, which
returns an int. However, "ASoC: rt5645: Remove irq_jack_detection
function" removes that function, and moves the code in
jack_detect_work, which returns void.
Remove the return value to fix compilation warning.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When the controller is powered up but the HDMI codec is powered down
on Skylake, the power well is turned off. When the codec is then
powered up again, we need to poke the codec a little extra to make
sure it wakes up. Otherwise we'll get sad "no response from codec"
messages and broken audio.
This also changes azx_runtime_resume to actually call
snd_hdac_set_codec_wakeup for Skylake (before STATETS read).
(Otherwise it would only have been called for Haswell and Broadwell,
which both do not need it, so this probably was not the author's
intention.)
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer Aspire V5 with the ALC282 codec is given the wrong value for the
0x19 PIN by the laptop's BIOS. Overriding it with the correct value
adds support for the headset microphone which would not otherwise be
visible in the system.
The fix is based on commit 7819717b11 with a similar quirk for Acer
Aspire with the ALC269 codec.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201
Cc: <stable@vger.kernel.org>
Signed-off-by: Mateusz Sylwestrzak <matisec7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The max_register should be the maximum valid register index rather than
number of registers. Also remove unused defines.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Tim Howe <tim.howe@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If 'of_ioremap' fails, then 'amd' should be freed, otherwise, there is a
memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to allow us to start adding extra annotations for sequences
without bloating register default tables duplicate the structure under
the new name reg_sequence and update the APIs to use that instead of
reg_default.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJVqUFGAAoJECTWi3JdVIfQ3YUH+LWLxVerlyUj/uug4vhRLlp2
KkKLInX1r9Al8cRWo6ln3kdB8jTmOxFxm1XUkpz+IQLiF0yV5kGtVm7uBup/X4DA
5oi7313rPs4maS/jqwyuOUi8X+ZMkKxp1Pgf4dJAzRJPN5tlks3drYdqY2c7JdT0
q5IqUR1KIsouK1/wCBy17BEe9PLpjV6U/yN2E/b1tsW1utjtAgY5pPjv/MZpPJ8C
NI6WXHjdykIi6Peg1mHqczgGEkyRlKBllZVsOvFhX1yjy0ITvao5/Mpv8NK5BwwU
cOWPVLlXOwa4m+kVXePPgA4GlB2q1Xupw5k6TDPip5aCGUgS+ryKQmOVcNaJnA==
=C5/o
-----END PGP SIGNATURE-----
Merge tag 'regmap-seq-delay-api' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-reg-default
regmap: Create a new struct reg_sequence for register sequences
In order to allow us to start adding extra annotations for sequences
without bloating register default tables duplicate the structure under
the new name reg_sequence and update the APIs to use that instead of
reg_default.
Conflicts:
sound/soc/codecs/da7210.c
sound/soc/codecs/rt5651.c
sound/soc/codecs/wm8993.c
This patch adds CTU (Channel Transfer Unit) support for rsnd driver.
But, it does nothing to data at this point, but is required for MIX
support.
CTU design is a little different from other IPs (CTU0 is including
CTU00 - CTU03, and CTU1 is including CTU10 - CTU13, these have different
register mapping) We need to care about it on this driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is assuming Audio DMAC / Audio DMAC peri peri
are used from SSI/SSIU/SRC/DVC. But we will add CTU/MIX to this driver.
Then, current DMA path searching method is not understandable, and good
enough for this purpose. This patch update DMA path search method, more
simply.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduced by:
commit 8019ff6cfc
("regmap: Use reg_sequence for multi_reg_write / register_patch")
Interacting with:
commit d1acd31883
("ASoC: wm5110: Add special DRE on/off handling for the headphone path")
Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to allow us to start adding extra annotations for sequences
without bloating register default tables duplicate the structure under
the new name reg_sequence and update the APIs to use that instead of
reg_default.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJVqUFGAAoJECTWi3JdVIfQ3YUH+LWLxVerlyUj/uug4vhRLlp2
KkKLInX1r9Al8cRWo6ln3kdB8jTmOxFxm1XUkpz+IQLiF0yV5kGtVm7uBup/X4DA
5oi7313rPs4maS/jqwyuOUi8X+ZMkKxp1Pgf4dJAzRJPN5tlks3drYdqY2c7JdT0
q5IqUR1KIsouK1/wCBy17BEe9PLpjV6U/yN2E/b1tsW1utjtAgY5pPjv/MZpPJ8C
NI6WXHjdykIi6Peg1mHqczgGEkyRlKBllZVsOvFhX1yjy0ITvao5/Mpv8NK5BwwU
cOWPVLlXOwa4m+kVXePPgA4GlB2q1Xupw5k6TDPip5aCGUgS+ryKQmOVcNaJnA==
=C5/o
-----END PGP SIGNATURE-----
Merge tag 'regmap-seq-delay-api' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-wm5110
regmap: Create a new struct reg_sequence for register sequences
In order to allow us to start adding extra annotations for sequences
without bloating register default tables duplicate the structure under
the new name reg_sequence and update the APIs to use that instead of
reg_default.
There are two small fixes for HD-audio and USB LINE6, and the rest are
a few new quirks and device ID addition that are good enough to get
into 4.2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EgRm
-----END PGP SIGNATURE-----
Merge tag 'sound-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There are two small fixes for HD-audio and USB LINE6, and the rest are
a few new quirks and device ID addition that are good enough to get
into 4.2"
* tag 'sound-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]
ALSA: line6: Fix -EBUSY error during active monitoring
ALSA: hda - Fix a wrong busy check in alt PCM open
ALSA: hda - add codec ID for Broxton display audio codec
ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4
This patch changes the return type of snd_hdac_power_up/down() and
variants to pass the error code from the underlying
pm_runtime_get/put() calls. Currently they are ignored, but in most
places, these should be handled properly.
As an example, the regmap handler is updated to check the return value
and accesses the register only when the wakeup succeeds.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the nonatomic PCM ops, the system may spew lockdep warnings like:
=============================================
[ INFO: possible recursive locking detected ]
4.2.0-rc1-jeejaval3 #12 Not tainted
---------------------------------------------
aplay/4029 is trying to acquire lock:
(snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fd473>] snd_pcm_stream_lock+0x43/0x60
but task is already holding lock:
(snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fcf29>] snd_pcm_action_nonatomic+0x29/0x80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(snd_pcm_link_rwsem);
lock(snd_pcm_link_rwsem);
Although this is false-positive as the rwsem is taken always as
read-only for these code paths, it's certainly annoying to see this at
any occasion. A simple fix is to use down_read_nested() in
snd_pcm_stream_lock() that can be called inside another lock.
Reported-by: Vinod Koul <vinod.koul@intel.com>
Reported-by: Jeeja Kp <jeeja.kp@intel.com>
Tested-by: Jeeja Kp <jeeja.kp@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In kstrdup we should return -ENOMEM when it reports an
memory allocation failure, while the -ENODEV is referred
to a failure in finding the cpu node in the device tree.
Signed-off-by: Heloise NH <kernelpatch_update@163.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver does not free irq when snd_soc_register_codec returns error.
It does not return error when request irq failed, either.
Add return when request irq failed, and free_irq if
snd_soc_register_codec failed.
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
"ASoC: rt5645: Simplify rt5645_enable_push_button_irq" removes
the test that accessed rt5645->pdata.jd_mode (that test is now
done in rt5645_jack_detect only), so we do not need that
variable anymore.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_pm_ops variables are not modified after initialization in these
drivers, so make them const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes kernel panic on boot, if rt5645->codec is NULL when
rt5645_jack_detect_work is first called.
rt5645_jack_detect_work needs rt5645->codec to be initialized to setup
dapm pins. Also, reporting jack events is useless, as the jacks cannot
be set before the codec is ready.
Since we manually call the interrupt handler in
rt5645_set_jack_detect, the initial jack state will be reported
correctly, and dapm pins will be setup at that time.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is cleanup for CTU/MIX support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes we would like to get each module directly, especially data path
searching. this patch adds rsnd_io_to_mod() macro, and existing
rsnd_io_to_mod_xxx() use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is using Audio DMAC (via DMAEngine) and
Audio DMAC peri peri (via original method), and usage of these DMAC
are different. Indicates its naming is useful for debugging.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC doesn't support Gen1, check it beginning of probe
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dma_ops is used only from dma.c, rsnd.h doesn't need it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can help for connection debug
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sound L/R order of SSI is different from Linux sound data order.
So current rsnd driver is using DALIGN (= data align) to exchange data
align on SSIU. OTOH, CMD/SRC/SSIU have DALIGN register. Now inverted
sound volume will be exchanged if user used volume control on DVC.
Because SSIU which exchanges data align is located after DVC.
MEM -> SRC -> DVC -> SSI
This patch exchanges data align SRC if possible
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver has rsnd_get_adinr_bit() to get bit settings for
ADINR (= Audio Information Register) of SSIU/SRC/DVC.
This patch adds rsnd_get_adinr_chan() to get channel settings for
ADINR (= Audio Information Register) of CTU/MIX.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound IP (= SSIU/SRC/CTU/MIX/DVC) have ADINR
(= Audio Information Register), but some of them (= SSIU/SRC/DVC)
are for audio data bits, some of them (= CTU/MIX) are for audio data
channels.
Current rsnd driver is supporting SSIU/SRC/DVC, and these ADINR were
for bits. This patch rename rsnd_get_adinr() to rsnd_get_adinr_bit(),
and we will have rsnd_get_adinr_chan() for CTU/MIX.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxIR (Initialization Register) is one
of them. These xxxIR need be set to 1 during initialization.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_src_initialize_lock/unlock() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxIR (Initialization Register) is one
of them. These xxxIR need be set to 1 during initialization.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_dvc_initialize_lock/unlock() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current sound data route settings is done in dvc.c, and it doesn't care
about CTU/MIX at this poinnt, but we need to care about these.
OTOH, rsnd driver already has rsnd_path_xxx() functions for data path which
are good match for CTU/MIX/DVC path selectio.
This patch adds new rsnd_path_parse() to select sound data route which will
care about CTU/MIX/DVC path.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
parse/break is a little ambiguous/confusable name for rsnd module path.
Especially for CTU/MIX support. It was renamed to add/remove
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxRSR (Software reset Register) is one
of them. These xxxRSR need be set to 1 to 0 when software reset.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_src_soft_reset() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxRSR (Software reset Register) is one
of them. These xxxRSR need be set to 1 to 0 when software reset.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_dvc_soft_reset() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_src_nr() is used only from src.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dvc_nr() is used only from dvc.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
enabling to use same method for exception case is useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We couldn't use SRC sync convert mode together with DVC,
but we can use workaround for it.
This patch adds workaround and can use SRC sync convert + DVC
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
'5451ea443b ("ASoC: rsnd: count each mod (SSI/SRC/DVC)")' counts each
module's callback status, but counts 1st callback only.
This patch fixup it. Otherwise, multi-called function will be trouble
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
based on datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
based on datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
using common audio routing path method makes sense.
Let's use snd_soc_of_parse_audio_route/prefix.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the functionality using sequences of register writes from the
functions that take register defaults. This change renames the arguments
in order to support the extension of reg_sequence to take an optional
delay to be applied after any given register in a sequence is written.
This avoids adding an int to all register defaults, which could
substantially increase memory usage for regmaps with large default tables.
This also updates all the clients of multi_reg_write/register_patch.
Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC can add name_prefix for DAPM, and it is necessary for
route settings. This patch adds snd_soc_of_parse_audio_prefix() for
this purpose. It will be used with snd_soc_of_parse_audio_routing().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the dsp and ipc initialization for the Skylake platform.
It also requests firmware and uses code loader dma to load it.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The code loader DMA interrupt is received by main interrupt handler which
dispatches it to cldma routines
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the last piece of code loader DMA APIs by adding the code
loader DMA APIs for the driver to use
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake has a DMA controller for loading DSP code and modules to memory.
Add the register defines for this DMA
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ops is initialized during the dsp registration and used for the
allocating dma buffers.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add capability to adjust player clock, for clocks drift management.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the platform and codec drivers, and how to build them.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoc uniperipheral dai driver that manages uniperipheral DAIs and registers
associated generic dma engine platform.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add code to manage Uniperipheral reader IP instances.
These DAIs are dedicated to capture and support I2S and IEC modes.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver does not use any CODEC specific constructs anymore. Convert it
to snd_soc_component.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver does not use any CODEC specific constructs anymore. Convert it
to snd_soc_component.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a stack local variable to handle function local state rather than a
global static variable. The later has a potential for race conditions if
the probe function runs for two devices concurrently.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
LDO2/Mic Det Power pins are already enabled/disabled in rt5645_jack_detect
(the jack out code path previously did not disable those if button function
is enabled: modify it to make it so).
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes sure the dapm state is consistent when the card is
instantiated.
However, if the card is not instantiated yet, we still update the
registers manually in the "jack in" case, so that we can immediately
report if a mic is present or not.
Disabling "Mic Det Power" after detection, and on jack out, can
wait until the card gets instantiated.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This line doesn't include any information. So, remove it.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.
v2: Disable the headphone amplifier when no headphone is connected.
Don't disable power savings to preserve the LED state.
v3: Remove headset-specific hooks and code; this is just a headphone.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes for compilation warnings and errors reported by Kbuild test robot
for x86_64 and i386.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the removal of the r8a7740 legacy board code in commit
1fa59bda21 ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), all former users of the "sh_fsi2" platform device
name are only supported in generic DT-only ARM multi-platform builds.
The driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fix following warnings.
Warning(.//sound/soc/soc-core.c:2855): No description found
for parameter 'platform_drv'
Warning(.//sound/soc/soc-core.c:2855): Excess function parameter
'platform_driver' description in 'snd_soc_add_platform'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fix following warning while make xmldocs.
Warning(.//sound/soc/soc-core.c:2148): No description found
for parameter 'ratio'
Add missing ":"
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
