[ Upstream commit ecb8c2580d ]
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62fa3ce05d ]
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.
This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a977ece577 ]
Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake)
devices IDs.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcdfa1f77e ]
On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry
region, reads that are not done in QWORD quantities and alignment may
return incorrect data. Use a custom 64-bit copy for this region.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a231224a60 ]
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Signed-off-by: Manyi Li <limanyi@uniontech.com>
Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46acc1efd ]
The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bcd560ae8 ]
This reverts commit c850240b6c.
That commit tried to improve the performance of macsec offload by
taking advantage of some of the NIC's features, but in doing so, broke
macsec offload when the lower device supports both macsec and ipsec
offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP)
were copied from the real device. Since the macsec device doesn't
provide xdo_* ops, the XFRM core rejects the registration of the new
macsec device in xfrm_api_check.
Example perf trace when running
ip link add link eni1np1 type macsec port 4 offload mac
ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869
xfrm_dev_event+0x3a
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD)
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
dev->features includes NETIF_F_HW_ESP (0x04000000000000), so
xfrm_api_check returns NOTIFY_BAD because we don't have
dev->xfrmdev_ops on the macsec device.
We could probably propagate GSO and a few other features from the
lower device, similar to macvlan. This will be done in a future patch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdb525ca92 ]
In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.
To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 475244f5e0 ]
Add a test case to ensure that released pointer registers will not be
leaked into the map.
Before fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg FAIL
Unexpected success to load!
verification time 67 usec
stack depth 4
processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
peak_states 2 mark_read 1
984/p reference tracking: try to leak released ptr reg OK
Summary: 1 PASSED, 0 SKIPPED, 1 FAILED
After fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg OK
984/p reference tracking: try to leak released ptr reg OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62aa1a344b ]
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b43088f30d ]
This patch fixes the warning
memcpy: detected field-spanning write (size 60) of single field "to" at drivers/s390/crypto/zcrypt_api.h:173 (size 2)
WARNING: CPU: 1 PID: 2114 at drivers/s390/crypto/zcrypt_api.h:173 prep_ep11_ap_msg+0x2c6/0x2e0 [zcrypt]
The code has been rewritten to use a union in combination
with a flex array to clearly state which part of the buffer
the payload is to be copied in via z_copy_from_user
function (which may call memcpy() in case of in-kernel calls).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Jürgen Christ <jchrist@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a89b6dec9 ]
The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).
The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).
Since f6f92968e1, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9921d5013a ]
It doesn't make sense batch submitting io_uring requests to a single TCP
socket without linking or some other kind of ordering. Moreover, it
causes spurious -EINTR fails due to interaction with task_work. Disable
it for now and keep queue depth=1.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b547698d5938b1b1a898af1c260188d8546ded9a.1666700897.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39e7b5de98 ]
When trying to transmit an data frame with tx_status to a destination
that have no route in the mesh, then it is dropped without recrediting
the ack_status_frames idr.
Once it is exhausted, wpa_supplicant starts failing to do SAE with
NL80211_CMD_FRAME and logs "nl80211: Frame command failed".
Use ieee80211_free_txskb() instead of kfree_skb() to fix it.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://lore.kernel.org/r/20221027140133.1504-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6cb876945 ]
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, we get a warning when assigning the
unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a
`u8`, which matches the struct's type, and then check each call to
hex_to_bin() before casting.
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986d93f55b ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
audit_register_class+0x9d/0x137
audit_classes_init+0x4d/0xb8
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bc8824d30 ]
This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
tree. The schematic doesn't specify any special function for the LEDs,
so they're added here without any default triggers and named d1, d2, d3
and d4 just like in the schematic.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4b3c1252 ]
The following error messages are observed on boot for Tegra234 ...
ERR KERN tegra-qspi 3270000.spi: cannot use DMA: -19
ERR KERN tegra-qspi 3270000.spi: falling back to PIO
Tegra234 does not support DMA for the QSPI and so initialising the DMA
is expected to fail. The above error messages are misleading for devices
that don't support DMA and so fix this by skipping the DMA
initialisation for devices that don't support DMA.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221026155633.141792-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69188df5f6 ]
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18429c51c7 ]
When invoking function cfg80211_calculate_bitrate_eht about
(320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the
parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2,
this formula (result * rate->nss) will overflow and causes
the returned bitrate to be 3959 when it should be 57646.
Here is the explanation:
u64 tmp;
u32 result;
…
/* tmp = result = 4 * rates_996[0]
* = 4 * 480388888 = 0x72889c60
*/
tmp = result;
/* tmp = 0x72889c60 * 6144 = 0xabccea90000 */
tmp *= SCALE;
/* tmp = 0xabccea90000 / mcs_divisors[13]
* = 0xabccea90000 / 5120 = 0x8970bba6
*/
do_div(tmp, mcs_divisors[rate->mcs]);
/* result = 0x8970bba6 */
result = tmp;
/* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c,
* but since result is u32, (result * rate->nss) = 0x12e1774c,
* overflow happens and it loses the highest bit.
* Then result = 0x12e1774c / 8 = 39595753,
*/
result = (result * rate->nss) / 8;
Signed-off-by: Paul Zhang <quic_paulz@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b2e87114 ]
ieee80211_register_hw free the allocated cipher suites when
registering wiphy fail, and ieee80211_free_hw will re-free it.
set wiphy_ciphers_allocated to false after freeing allocated
cipher suites.
Signed-off-by: taozhang <taozhang@bestechnic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bd76b8de5 ]
The request's r_session maybe changed when it was forwarded or
resent. Both the forwarding and resending cases the requests will
be protected by the mdsc->mutex.
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2137955
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa1d627207 ]
Prefer using kcalloc(a, b) over kzalloc(a * b) as this improves
semantics since kcalloc is intended for allocating an array of memory.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 5bd76b8de5 ("ceph: fix NULL pointer dereference for req->r_session")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce00bb7e9 ]
Since commit 1da52815d5 ("binder: fix alloc->vma_vm_mm null-ptr
dereference") binder caches a pointer to the current->mm during open().
This fixes a null-ptr dereference reported by syzkaller. Unfortunately,
it also opens the door for a process to update its mm after the open(),
(e.g. via execve) making the cached alloc->mm pointer invalid.
Things get worse when the process continues to mmap() a vma. From this
point forward, binder will attempt to find this vma using an obsolete
alloc->mm reference. Such as in binder_update_page_range(), where the
wrong vma is obtained via vma_lookup(), yet binder proceeds to happily
insert new pages into it.
To avoid this issue fail the ->mmap() callback if we detect a mismatch
between the vma->vm_mm and the original alloc->mm pointer. This prevents
alloc->vm_addr from getting set, so that any subsequent vma_lookup()
calls fail as expected.
Fixes: 1da52815d5 ("binder: fix alloc->vma_vm_mm null-ptr dereference")
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20221104231235.348958-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63095f4f3a upstream.
Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find().
Because the ATTR_RECORDs are next to each other, kernel can get the next
ATTR_RECORD from end address of current ATTR_RECORD, through current
ATTR_RECORD length field.
The problem is that during iteration, when kernel calculates the end
address of current ATTR_RECORD, kernel may trigger an integer overflow bug
in executing `a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))`. This
may wrap, leading to a forever iteration on 32bit systems.
This patch solves it by adding some checks on calculating end address
of current ATTR_RECORD during iteration.
Link: https://lkml.kernel.org/r/20220831160935.3409-4-yin31149@gmail.com
Link: https://lore.kernel.org/all/20220827105842.GM2030@kadam/
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: chenxiaosong (A) <chenxiaosong2@huawei.com>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36a4d82ddd upstream.
Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find(). To
ensure access on these ATTR_RECORDs are within bounds, kernel will do some
checking during iteration.
The problem is that during checking whether ATTR_RECORD's name is within
bounds, kernel will dereferences the ATTR_RECORD name_offset field, before
checking this ATTR_RECORD strcture is within bounds. This problem may
result out-of-bounds read in ntfs_attr_find(), reported by Syzkaller:
==================================================================
BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193
ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845
ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854
mount_bdev+0x34d/0x410 fs/super.c:1400
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350
head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140
raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
This patch solves it by moving the ATTR_RECORD strcture's bounds checking
earlier, then checking whether ATTR_RECORD's name is within bounds.
What's more, this patch also add some comments to improve its
maintainability.
Link: https://lkml.kernel.org/r/20220831160935.3409-3-yin31149@gmail.com
Link: https://lore.kernel.org/all/1636796c-c85e-7f47-e96f-e074fee3c7d3@huawei.com/
Link: https://groups.google.com/g/syzkaller-bugs/c/t_XdeKPGTR4/m/LECAuIGcBgAJ
Signed-off-by: chenxiaosong (A) <chenxiaosong2@huawei.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reported-by: syzbot+5f8dcabe4a3b2c51c607@syzkaller.appspotmail.com
Tested-by: syzbot+5f8dcabe4a3b2c51c607@syzkaller.appspotmail.com
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85a1bec8e upstream.
Patch series "ntfs: fix bugs about Attribute", v2.
This patchset fixes three bugs relative to Attribute in record:
Patch 1 adds a sanity check to ensure that, attrs_offset field in first
mft record loading from disk is within bounds.
Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid
dereferencing ATTR_RECORD before checking this ATTR_RECORD is within
bounds.
Patch 3 adds an overflow checking to avoid possible forever loop in
ntfs_attr_find().
Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free
detection as reported by Syzkaller.
Although one of patch 1 or patch 2 can fix this, we still need both of
them. Because patch 1 fixes the root cause, and patch 2 not only fixes
the direct cause, but also fixes the potential out-of-bounds bug.
This patch (of 3):
Syzkaller reported use-after-free read as follows:
==================================================================
BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607
[...]
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597
ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193
ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845
ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854
mount_bdev+0x34d/0x410 fs/super.c:1400
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
The buggy address belongs to the physical page:
page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350
head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140
raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Kernel will loads $MFT/$DATA's first mft record in
ntfs_read_inode_mount().
Yet the problem is that after loading, kernel doesn't check whether
attrs_offset field is a valid value.
To be more specific, if attrs_offset field is larger than bytes_allocated
field, then it may trigger the out-of-bounds read bug(reported as
use-after-free bug) in ntfs_attr_find(), when kernel tries to access the
corresponding mft record's attribute.
This patch solves it by adding the sanity check between attrs_offset field
and bytes_allocated field, after loading the first mft record.
Link: https://lkml.kernel.org/r/20220831160935.3409-1-yin31149@gmail.com
Link: https://lkml.kernel.org/r/20220831160935.3409-2-yin31149@gmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: ChenXiaoSong <chenxiaosong2@huawei.com>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05b24ff9b2 upstream.
We got report from sysbot [1] about warnings that were caused by
bpf program attached to contention_begin raw tracepoint triggering
the same tracepoint by using bpf_trace_printk helper that takes
trace_printk_lock lock.
Call Trace:
<TASK>
? trace_event_raw_event_bpf_trace_printk+0x5f/0x90
bpf_trace_printk+0x2b/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
bpf_trace_printk+0x3f/0xe0
bpf_prog_a9aec6167c091eef_prog+0x1f/0x24
bpf_trace_run2+0x26/0x90
native_queued_spin_lock_slowpath+0x1c6/0x2b0
_raw_spin_lock_irqsave+0x44/0x50
__unfreeze_partials+0x5b/0x160
...
The can be reproduced by attaching bpf program as raw tracepoint on
contention_begin tracepoint. The bpf prog calls bpf_trace_printk
helper. Then by running perf bench the spin lock code is forced to
take slow path and call contention_begin tracepoint.
Fixing this by skipping execution of the bpf program if it's
already running, Using bpf prog 'active' field, which is being
currently used by trampoline programs for the same reason.
Moving bpf_prog_inc_misses_counter to syscall.c because
trampoline.c is compiled in just for CONFIG_BPF_JIT option.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reported-by: syzbot+2251879aa068ad9c960d@syzkaller.appspotmail.com
[1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220916071914.7156-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 296ab4a813 upstream.
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
Link: https://lore.kernel.org/r/20220904112928.1308799-1-asmadeus@codewreck.org
Link: https://lkml.kernel.org/r/2470e028-9b05-2013-7198-1fdad071d999@I-love.SAKURA.ne.jp [1]
Link: https://syzkaller.appspot.com/bug?extid=2f20b523930c32c160cc [2]
Reported-by: syzbot <syzbot+2f20b523930c32c160cc@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1468c6f455 upstream.
Functions implementing the a_ops->write_end() interface accept the `void
*fsdata` parameter that is supposed to be initialized by the corresponding
a_ops->write_begin() (which accepts `void **fsdata`).
However not all a_ops->write_begin() implementations initialize `fsdata`
unconditionally, so it may get passed uninitialized to a_ops->write_end(),
resulting in undefined behavior.
Fix this by initializing fsdata with NULL before the call to
write_begin(), rather than doing so in all possible a_ops implementations.
This patch covers only the following cases found by running x86 KMSAN
under syzkaller:
- generic_perform_write()
- cont_expand_zero() and generic_cont_expand_simple()
- page_symlink()
Other cases of passing uninitialized fsdata may persist in the codebase.
Link: https://lkml.kernel.org/r/20220915150417.722975-43-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 448dca8c88 upstream.
These commits use WARN_ON_ONCE() and kill the offending processes when
deprecated and unknown flags are encountered:
commit c17a6ff932 ("rseq: Kill process when unknown flags are encountered in ABI structures")
commit 0190e4198e ("rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags")
The WARN_ON_ONCE() triggered by userspace input prevents use of
Syzkaller to fuzz the rseq system call.
Replace this WARN_ON_ONCE() by pr_warn_once() messages which contain
actually useful information.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20221102130635.7379-1-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3e6e1d16a upstream.
Syzkaller reports buffer overflow false positive as follows:
------------[ cut here ]------------
memcpy: detected field-spanning write (size 8) of single field
"&compat_event->pointer" at net/wireless/wext-core.c:623 (size 4)
WARNING: CPU: 0 PID: 3607 at net/wireless/wext-core.c:623
wireless_send_event+0xab5/0xca0 net/wireless/wext-core.c:623
Modules linked in:
CPU: 1 PID: 3607 Comm: syz-executor659 Not tainted
6.0.0-rc6-next-20220921-syzkaller #0
[...]
Call Trace:
<TASK>
ioctl_standard_call+0x155/0x1f0 net/wireless/wext-core.c:1022
wireless_process_ioctl+0xc8/0x4c0 net/wireless/wext-core.c:955
wext_ioctl_dispatch net/wireless/wext-core.c:988 [inline]
wext_ioctl_dispatch net/wireless/wext-core.c:976 [inline]
wext_handle_ioctl+0x26b/0x280 net/wireless/wext-core.c:1049
sock_ioctl+0x285/0x640 net/socket.c:1220
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
Wireless events will be sent on the appropriate channels in
wireless_send_event(). Different wireless events may have different
payload structure and size, so kernel uses **len** and **cmd** field
in struct __compat_iw_event as wireless event common LCP part, uses
**pointer** as a label to mark the position of remaining different part.
Yet the problem is that, **pointer** is a compat_caddr_t type, which may
be smaller than the relative structure at the same position. So during
wireless_send_event() tries to parse the wireless events payload, it may
trigger the memcpy() run-time destination buffer bounds checking when the
relative structure's data is copied to the position marked by **pointer**.
This patch solves it by introducing flexible-array field **ptr_bytes**,
to mark the position of the wireless events remaining part next to
LCP part. What's more, this patch also adds **ptr_len** variable in
wireless_send_event() to improve its maintainability.
Reported-and-tested-by: syzbot+473754e5af963cf014cf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000070db2005e95a5984@google.com/
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 710d21fdff upstream.
In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(),
switch from __nlmsg_put to nlmsg_put(), and explain the bounds check
for dealing with the memcpy() across a composite flexible array struct.
Avoids this future run-time warning:
memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220901071336.1418572-1-keescook@chromium.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef575281b2 upstream.
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
Link: https://lkml.kernel.org/r/345de429-a88b-7097-d177-adecf9fed342@I-love.SAKURA.ne.jp
Link: https://syzkaller.appspot.com/bug?extid=8b41a1365f1106fd0f33 [1]
Reported-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: add comment at Christian's suggestion]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204c0300c4 upstream.
Switch from strlcpy to strscpy and make sure that @count is the size of
the smaller of the source and destination buffers. This prevents
reading beyond the end of the source buffer when the source string isn't
null terminated.
Found by a modified version of syzkaller.
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 670f8ce56d upstream.
Fuzzers like to scribble over sb_bsize_shift but in reality it's very
unlikely that this field would be corrupted on its own. Nevertheless it
should be checked to avoid the possibility of messy mount errors due to
bad calculations. It's always a fixed value based on the block size so
we can just check that it's the expected value.
Tested with:
mkfs.gfs2 -O -p lock_nolock /dev/vdb
for i in 0 -1 64 65 32 33; do
gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb
mount /dev/vdb /mnt/test && umount /mnt/test
done
Before this patch we get a withdraw after
[ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block
[ 76.413681] bh = 19 (type: exp=5, found=4)
[ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492
and with UBSAN configured we also get complaints like
[ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19
[ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int'
After the patch, these complaints don't appear, mount fails immediately
and we get an explanation in dmesg.
Reported-by: syzbot+dcf33a7aae997956fe06@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b64085b000 upstream.
macvlan should enforce a minimal mtu of 68, even at link creation.
This patch avoids the current behavior (which could lead to crashes
in ipv6 stack if the link is brought up)
$ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail !
$ ip link sh dev macvlan1
5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop
state DOWN mode DEFAULT group default qlen 1000
link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff
$ ip link set macvlan1 mtu 67
Error: mtu less than device minimum.
$ ip link set macvlan1 mtu 68
$ ip link set macvlan1 mtu 8
Error: mtu less than device minimum.
Fixes: 91572088e3 ("net: use core MTU range checking in core net infra")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81cd7e8489 ]
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
Fixes: 9222ba68c3 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 067df9e0ad ]
Entries in list 'tr->err_log' will be reused after entry number
exceed TRACING_LOG_ERRS_MAX.
The cmd string of the to be reused entry will be freed first then
allocated a new one. If the allocation failed, then the entry will
still be in list 'tr->err_log' but its 'cmd' field is set to be NULL,
later access of 'cmd' is risky.
Currently above problem can cause the loss of 'cmd' information of first
entry in 'tr->err_log'. When execute `cat /sys/kernel/tracing/error_log`,
reproduce logs like:
[ 37.495100] trace_kprobe: error: Maxactive is not for kprobe(null) ^
[ 38.412517] trace_kprobe: error: Maxactive is not for kprobe
Command: p4:myprobe2 do_sys_openat2
^
Link: https://lore.kernel.org/linux-trace-kernel/20221114104632.3547266-1-zhengyejian1@huawei.com
Fixes: 1581a884b7 ("tracing: Remove size restriction on tracing_log_err cmd strings")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dd7caf0bd ]
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly.
Link: https://lore.kernel.org/all/20221112070000.35299-1-lihuafei1@huawei.com/
Fixes: 0bc11ed5ab ("kprobes: Allow kprobes coexist with livepatch")
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e208a1d795 ]
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc68e428d4 ]
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need
goto error label in this case.
Fixes: 3703b2c5d0 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115015042.3652261-1-yangyingliang@huawei.com
Reviewed-by: Mike Christie <michael.chritie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58e0be1ef6 ]
kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:
from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f8324188 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
