Split off the memory and type validation. This is done both from reqbufs
and create_bufs, and will also be done by vb2 helpers in a later patch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
v4l_i2c_print_ioctl wasn't used and v4l_print_ioctl could be replaced by
v4l_printk_ioctl.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Since this could theoretically change the debug value while in the middle
of v4l2-ioctl.c, we make a copy of vfd->debug to ensure consistent debug
behavior.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Implement the default case which finalizes the table conversion and allows
us to remove the last part of the switch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add the necessary plumbing to make it possible to replace the switch by a
table driven implementation.
The ioctls ops can either be called directly, or by calling a small function
that does some additional work if needed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The switch statement that determines how much data should be copied from
userspace is replaced by a table lookup.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A block of code is moved down in the code to make later changes easier.
Do just the move without other changes to keep the diff readable for the
upcoming patch.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add ".has_radio = 1" for BTTV_BOARD_MAGICTVIEW061 because there are
some CHP05x/CHP06x boards with a radio tuner.
I still have an analog Askey Magic TView card (CHP051, PCI 144f:3002)
which I use for radio only. This worked fine with kernel 2.6.37
(openSUSE 11.4), but no longer works with kernel 3.1.10 (openSUSE 12.1).
The reason apparently is that ".has_radio = 1" is missing in
bttv-cards.c for BTTV_BOARD_MAGICTVIEW061; when I add this line and
recompile the kernel, radio is working again. The line is still missing
in the latest git tree, for which I have generated the attached patch.
I can't test what will happen for CHP05x/CHP06x devices without radio;
however, it seems that other cards also have the problem that there are
some boards with radio and some without, so I hope that this can be
sorted out.
Signed-off-by: Thomas Betker <thomas.betker@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add ADV7393 I²C-based video encoder driver. This driver has been tested on
custom hardware. It has been tested for composite output. It is derived from the
ADV7343 driver.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove variable and ignore return value of stv090x_chk_signal().
Tested by compilation only.
[mchehab@redhat.com: instead of reverting and applying V3,
applied just the diff patch, for the sake of a cleaner history]
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The alternate setting number is not equal to the alternate setting index
in the interface alternate settings table. Use the alternate setting
number from the interface descriptor when calling usb_set_interface().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When video endpoint is configured as bulk, a ZLP is sent after every
video frames with size as multiple of 512 bytes. This is done so that
host can detect end of transfer and pass data for processing.
Still, frames that are multiple of 16K in size gets dropped. The ZLP
sent by camera is ignored by uvc_video_decode_bulk(). The makes sure
that the ZLP is not part of a video frame before ignoring it. If ZLP
follows a video frame, then it triggers completion callback.
[mchehab@redhat.com: Fix a small CodingStyle issue]
Signed-off-by: Jayakrishnan Memana <jayakrishnan.memana@maxim-ic.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Several developers have reported that the lack of macros for the struct
uvc_xu_control_query query field in uvcvideo.h was confusing and forced
them to look at the driver source code to find out what applications
were supposed to pass in that field.
Add a comment to the header to clarify the expected usage of the query
field.
Reported-by: Paulo Assis <pj.assis@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch simply fixes some logging calls:
- Use KERN_INFO when printing the chip status.
- Add a missing space when logging the drxk_gate_ctrl call.
- Use the same logging text as always if the scu_command in GetQAMLockStatus fails.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently there are two different implementations (in the firmware) for
the QAM demodulator command: one takes 4 and the other takes 2
parameters. The driver shows an error in dmesg When using the
4-parameter command with firmware that implements the 2-parameter
command. Unfortunately this happens every time when chaning the
frequency (on DVB-C).
This patch simply makes configurable, how many command parameters will
be used. All existing drxk_config instances using the "drxk_a3.mc" were
updated because this firmware is the only loadable firmware where the
QAM demodulator command takes 4 parameters. Some firmwares in the ROM
might also use it. The drxk instances in the em28xx-dvb driver were also
updated to silence the warnings.
If no qam_demod_parameter_count is given in the drxk_config struct, then
the correct number of parameters will be auto-detected.
[mchehab@redhat.com: Fix a small CodingStyle issue at one comment]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
IQM_AF_CLKNEG_CLKNEGDATA__M is 0x2 and
IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS is 0. (clkNeg | 0x2) is never
equal to zero so the condition can never be true.
I consulted with Ralph Metzler and the '|' should be changed to a '&'.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Ralph Metzler <rjkm@metzlerbros.de>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When tuner-xc2028 is not compiled as a module, dracut will
need to copy the firmware inside the initfs image.
So, use MODULE_FIRMWARE() to indicate such need.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
USB_VIDEO_CLASS_INPUT_EVDEV should be dependent on the UVC
selection, as otherwise, when UVC is unselected, this dependent
config still appears.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Better arrange the remote controller driver items to happen after the
core support, on their proper menus, and making clerarer what is media
core options and what is media driver options.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Commit 7a6f6c29d2 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.
Signed-off-by: David Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Most calls to cx231xx_capture_start() already use the values from
TRANSFER_TYPE, but cx231xx_capture_start() and
cx231xx_initialize_stream_xfer() were hand coding the values.
Use the named values (81 is never passed in), and simplify
cx231xx_capture_start(), as the switch statements were identical and
pcb_config->config_num is a u8, so any non-zero config got the same
result.
Signed-off-by: David Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The firmwares are there at the same place for a long time. However,
each time I need to remember where it is, I need to seek at the net.
The better is to just add a logic at the get_dvb_firmare script,
in order to obtain it from a reliable source.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
changeset 2b719d7baf (v4l: drop v4l2_buffer.input and V4L2_BUF_FLAG_INPUT)
broke compilation on x86_64:
v4l2-compat-ioctl32.c: In function 'get_v4l2_buffer32':
v4l2-compat-ioctl32.c:391:4: error: expected ')' before 'return'
...
v4l2-compat-ioctl32.c: In function 'put_v4l2_buffer32':
v4l2-compat-ioctl32.c:475:4: error: expected ')' before 'return'
...
Add the missing close parenthesis character.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab is the current maintainer of staging/media.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After this patch, the MEDIA*_SUPPORT will be used as a filter,
exposing only devices that are pertinent to one of the 3
V4L types: webcam/grabber, radio, analog TV.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In the past, it was possible to have either DVB or V4L2 core
as module and the other as builtin. Such config never make much
sense, and created several issues in order to make the Kconfig
dependency to work, as all drivers that depend on both (most
TV drivers) would need to be compiled as 'm'. Due to that,
the VIDEO_MEDIA config option were added.
Instead of such weird approach, let's just use the MEDIA_SUPPORT
=y or =m to select if the media subsystem core will be either
builtin or module, simplifying the building system logic.
Also, fix the tuners configuration, by enabling them only if
a tuner is required. So, if just webcam/grabbers support is
selected, no tuner option will be selected. Also, if only digital
TV is selected, no analog tuner support is selected.
That removes the need of using EXPERT customise options, when
analog TV is not selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change the main items to:
<m> Multimedia support --->
[ ] Cameras/video grabbers support
[ ] Analog TV support
[ ] Digital TV support
[ ] AM/FM radio receivers/transmitters support
[ ] Remote Controller support
This provides an interface that is clearer to end users that
are compiling the Kernel, and will allow the building system
to automatically unselect drivers for unused functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that the input fields got removed from the userspace API,
there's no sense to keep there at the VB struct. Remove it.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove input field in struct v4l2_buffer and flag V4L2_BUF_FLAG_INPUT which
tells the former is valid. The flag is used by no driver currently.
Also change the documentation accordingly.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
xc5000 is just a tuner, not a decoder, so both DMB-TH and ISDB-T should
work properly there: it is just a matter of teaching the driver what
saw filter should be used and how to calculate the center frequency.
Requested-by: Choi Wing Chan <chanchoiwing@gmail.com>
Cc: Steven Toth <stoth@linuxtv.org>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add horizontal and vertical flip to the mem2mem_testdev driver.
Flip modes can be enabled either separately or simultaneously.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
