The only caller of this function only cares about gross success/failure
but we still might as well resolve the following smatch warning and fix
the other error paths as well:
hiddev.c:894 hiddev_connect() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with
a different version of the quad/bt2.0 combo receivers shipped with the
MX5000 and MX5500 keyboards. These receivers are compatible with one
another, e.g. the Dinovo Edge keyboard can be paired with the MX5000
receiver.
Like the MX5x00 receivers in HID proxy mode these receivers present
themselves as a hub with multiple USB-HID devices, one for the keyboard
and one for the mouse.
Where they differ is that the mouse USB-device has 2 input reports for
reporting mice events. It has the exact same INPUT(2) report as the
MX5x00 receivers, but it also has a second INPUT(5) mouse report which
is different; and when the Dinovo receivers are paired with the Dinovo
keyboards the second INPUT(5) mouse report is actually used for events
on the builtin touchpad.
Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers
in HID proxy mode to logitech-dj, like we already do for the similar
MX5000 and MX5500 receivers.
This adds battery monitoring functionality (through logitech-hidpp) and
fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not
working on the Dinovo Edge.
Note these receivers present themselves as a hub with 2 separate USB
devices for the keyboard and mouse; and the logitech-dj code needs to
bind to both devices (just as with the MX5x00 receivers).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The logitech-dj code already uses hid-ids.h defines for almost all devices
it supports. Lets be consistent: add and use hid-ids.h defines for the
G700, MX5000 and MX5500 receivers too.
Also add / update some comments to make the comment style in the
hid_device_id table consistent too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver depends on ACPI, ACPI_PTR() resolution is always the same.
Otherwise a compiler may produce a warning.
That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or
none should be used in a driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move static GUID variable out of the function and add a comment
how it looks like in the human readable representation.
While at it, include uuid.h since the guid_t type is defined in it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Switch to the new style i2c-driver probe_new probe function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the ACPI companion and handle are retrieved and checked
a few times in different functions. Instead get ACPI companion only
once and reuse it everywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
- hid-multitouch devices should be put into high-latency mode when
suspended in order to be in line with Windows Precision Touchpad
guidelines. From Blaž Hrastnik.
- improved handling of generic HID keyboard (no more splitting system
and consumer controls away), in order to make it easier for userspace
to figure out the details of the device easier. From Dmitry Torokhov.
- report data sanitization fixes from Will McVicker and Randy Dunlap
Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has gone
down for a bit, maybe there's only so much churn to happen in here at
the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style cleanups,
along with some semi-larger hikey driver cleanups as those are _almost_
good enough to get out of the staging tree, but will probably have to
wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYCqelQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymIDQCguWtPGy6U1sgaL3GAK/ROt2aet3wAn3TP1WgB
GeKAKKPshu3cskYQzlou
=UPZR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has
gone down for a bit, maybe there's only so much churn to happen in
here at the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style
cleanups, along with some semi-larger hikey driver cleanups as those
are _almost_ good enough to get out of the staging tree, but will
probably have to wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits)
staging: hikey9xx: Fix alignment of function parameters
staging: greybus: Fixed a misspelling in hid.c
staging: wimax/i2400m: fix some byte order issues found by sparse
staging: wimax: i2400m: fix some incorrect type warnings
staging: greybus: minor code style fix
staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
staging: rtl8192e: remove multiple blank lines
staging: greybus: Fixed alignment issue in hid.c
staging: wfx: remove unused included header files
staging: nvec: minor coding style fix
staging: wimax: Fix some coding style problem
staging: fbtft: add tearing signal detect
staging: vt6656: Fixed issue with alignment in rf.c
staging: qlge: Remove duplicate word in comment
staging: rtl8723bs: remove obsolete commented out code
staging: rtl8723bs: fix function comments to follow kernel-doc
staging: wfx: avoid defining array of flexible struct
staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
staging: Replace lkml.org links with lore
...
The DualSense features 5 player LEDs below its touchpad, which are
meant as player id indications. The LEDs are configured with a
player ID determined by an ID allocator, which assign player ids
to ps_device instances.
This patch is a combination of the following original patches
minus use of LED framework APIs:
- HID: playstation: add DualSense player LEDs support.
- HID: playstation: DualSense set LEDs to default player id.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense controller has a built-in microphone exposed as an
audio device over USB (or HID using Bluetooth). A dedicated
button on the controller handles mute, but software has to configure
the device to mute the audio stream.
This patch captures the mute button and schedules an output report
to mute/unmute the audio stream as well as toggle the mute LED.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Provide initial support for the DualSense lightbar and configure it
with a default PlayStation blue color.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The `wacom_feature_mapping` function is careful to only set the the
touch_max value a single time, but this care does not extend to the
`wacom_wac_finger_event` function. In particular, if a device sends
multiple HID_DG_CONTACTMAX items in a single feature report, the
driver will end up retaining the value of last item.
The HID descriptor for the Cintiq Companion 2 does exactly this. It
incorrectly sets a "Report Count" of 2, which will cause the driver
to process two HID_DG_CONTACTCOUNT items. The first item has the actual
count, while the second item should have been declared as a constant
zero. The constant zero is the value the driver ends up using, however,
since it is the last HID_DG_CONTACTCOUNT in the report.
Report ID (16),
Usage (Contact Count Maximum), ; Contact count maximum (55h, static value)
Report Count (2),
Logical Maximum (10),
Feature (Variable),
To address this, we add a check that the touch_max is not already set
within the `wacom_wac_finger_event` function that processes the
HID_DG_TOUCHMAX item. We emit a warning if the value is set and ignore
the updated value.
This could potentially cause problems if there is a tablet which has
a similar issue but requires the last item to be used. This is unlikely,
however, since it would have to have a different non-zero value for
HID_DG_CONTACTMAX earlier in the same report, which makes no sense
except in the case of a firmware bug. Note that cases where the
HID_DG_CONTACTMAX items are in different reports is already handled
(and similarly ignored) by `wacom_feature_mapping` as mentioned above.
Link: https://github.com/linuxwacom/input-wacom/issues/223
Fixes: 184eccd403 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The comparison of value with the array size ps_gamepad_hat_mapping
appears to be off-by-one. Fix this by using >= rather than > for the
size comparison.
Addresses-Coverity: ("Out-of-bounds read")
Fixes: bc2e15a9a0 ("HID: playstation: initial DualSense USB support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The ret variable in ps_battery_get_property is set in an error path,
but never actually returned. Change the function to return ret.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Retrieve DualSense hardware and firmware information using a vendor
specific feature report. Report the data through sysfs and also
report using hid_info as there can be signficant differences between
versions.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense features a haptics system based on voicecoil motors,
which requires PCM data (or special HID packets using Bluetooth). There
is no appropriate API yet in the Linux kernel to expose these. The
controller also provides a classic rumble feature for backwards
compatibility. Expose this classic rumble feature using the FF framework.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch adds support for the DualSense when operating in Bluetooth mode.
The device has the same behavior as the DualShock 4 in that by default it
sends a limited input report (0x1), but after requesting calibration data,
it switches to an extended input report (report 49), which adds data for
touchpad, motion sensors, battery and more.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Track devices in a list, so we can detect when a device is connected
twice when using Bluetooth and USB.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The DualSense features an accelerometer and gyroscope. The data is
embedded into the main HID input reports. Expose both sensors through
through a separate evdev node.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Implement support for DualSense touchpad as a separate input device.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Report DualSense battery status information through power_supply class.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Use the DualSense MAC address as a unique identifier for the HID device.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Implement support for PlayStation DualSense gamepad in USB mode.
Support features include buttons and sticks, which adhere to the
Linux gamepad spec.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids
as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:
1. The S1003 keyboard-dock has the same report descriptors as the
S1002 keyboard-dock (which has different USB-ids)
2. The Acer Aspire Switch 10E's keyboard-dock has different
report descriptors from the S1002/S1003 keyboard docks and it
sends 0x00880078 / 0x00880079 usage events when the touchpad is
toggled on/off (which is handled internally).
This means that all Acer kbd-docks handled by the hid-ite.c drivers
report their touchpad being toggled on/off through these custom
usage-codes with the exception of the S1003 dock, which likely is
a bug of that dock.
Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003
usb-id so that the touchpad toggling will get reported to userspace on
the Aspire Switch 10E.
Since the Aspire Switch 10E's kbd-dock has different report-descriptors,
this also requires adding support for fixing those to ite_report_fixup().
Setting the quirk will also cause ite_report_fixup() to hit the
S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock
never generates any input-reports for the fixed up part of the
descriptors this does not matter; and if there are versions out there
which do actually send input-reports for the touchpad-toggle then the
fixup should actually help to make things work.
This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx
even if it does not have a battery. Prevent it to always report the
battery as low.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This new connection type is the new iteration of the Lightspeed
connection and will probably be used in some of the newer gaming
devices. It is currently use in the G Pro X Superlight.
This patch should be backported to older versions, as currently the
driver will panic when seing the unsupported connection. This isn't
an issue when using the receiver that came with the device, as Logitech
has been using different PIDs when they change the connection type, but
is an issue when using a generic receiver (well, generic Lightspeed
receiver), which is the case of the one in the Powerplay mat. Currently,
the only generic Ligthspeed receiver we support, and the only one that
exists AFAIK, is ther Powerplay.
As it stands, the driver will panic when seeing a G Pro X Superlight
connected to the Powerplay receiver and won't send any input events to
userspace! The kernel will warn about this so the issue should be easy
to identify, but it is still very worrying how hard it will fail :(
[915977.398471] logitech-djreceiver 0003:046D:C53A.0107: unusable device of type UNKNOWN (0x0f) connected on slot 1
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added Tiger Lake H PCI device ID to the supported device list.
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In e400071a80 I added support for the
receiver that comes with the G602 device, but unfortunately I screwed up
during testing and it seems the keyboard events were actually not being
sent to userspace.
This resulted in keyboard events being broken in userspace, please
backport the fix.
The receiver uses the normal 0x01 Logitech keyboard report descriptor,
as expected, so it is just a matter of flagging it as supported.
Reported in
https://github.com/libratbag/libratbag/issues/1124
Fixes: e400071a80 ("HID: logitech-dj: add the G602 receiver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID
attached keyboard and mouse (which seems to never send any events).
This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get
the following errors:
[ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61
[ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61
Which leads to a significant boot delay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the following coccicheck warning:
./drivers/hid/hid-roccat-arvo.c:45:8-16: WARNING: use scnprintf or
sprintf.
./drivers/hid/hid-roccat-arvo.c:95:8-16: WARNING: use scnprintf or
sprintf.
./drivers/hid/hid-roccat-arvo.c:149:8-16: WARNING: use scnprintf or
sprintf.
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Don't populate the const array led_names on the stack but instead make
it static. Makes the object code smaller by 79 bytes:
Before:
text data bss dec hex filename
19686 7952 256 27894 6cf6 drivers/hid/hid-lg-g15.o
After:
text data bss dec hex filename
19543 8016 256 27815 6ca7 drivers/hid/hid-lg-g15.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This forces reading the base folded state anytime the device is
probed, to make sure it's in sync.
This is useful after a reboot, if the device re-enumerates for
any reason (e.g. ESD shock), or if the driver is unbound/rebound
(debugging/testing).
Without this, the tablet switch state is only synchronized after a
key is pressed (since the device would then send a report that
includes the switch state), leading to strange UX (e.g. UI
mode changes when a key is pressed after reboot).
This is not a problem on detachable base attach, as the device,
by itself, sends a report after it is booted up.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A typical USB keyboard usually splits its keys into several reports:
- one for the basic alphanumeric keys, modifier keys, F<n> keys, six pack
keys and keypad. This report's application is normally listed as
GenericDesktop.Keyboard
- a GenericDesktop.SystemControl report for the system control keys, such
as power and sleep
- Consumer.ConsumerControl report for multimedia (forward, rewind,
play/pause, mute, etc) and other extended keys.
- additional output, vendor specific, and feature reports
Splitting each report into a separate input device is wasteful and even
hurts userspace as it makes it harder to determine the true capabilities
(set of available keys) of a keyboard, so let's adjust application
matching to merge system control and consumer control reports with
keyboard report, if one has already been processed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use correct kernel-doc notation for functions.
Add notation (comments) where it is missing.
Use the documented "Return:" notation for function return values.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The recent commit to fix a memory leak introduced an inadvertant NULL
pointer dereference. The `wacom_wac->pen_fifo` variable was never
intialized, resuling in a crash whenever functions tried to use it.
Since the FIFO is only used by AES pens (to buffer events from pen
proximity until the hardware reports the pen serial number) this would
have been easily overlooked without testing an AES device.
This patch converts `wacom_wac->pen_fifo` over to a pointer (since the
call to `devres_alloc` allocates memory for us) and ensures that we assign
it to point to the allocated and initalized `pen_fifo` before the function
returns.
Link: https://github.com/linuxwacom/input-wacom/issues/230
Fixes: 37309f47e2 ("HID: wacom: Fix memory leakage caused by kfifo_alloc")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Per Windows Precision Touchpad guidelines:
> The latency mode feature report is sent by the host to a Windows
> Precision Touchpad to indicate when high latency is desirable for
> power savings and, conversely, when normal latency is desired for
> operation.
>
> For USB-connected Windows Precision Touchpads, this enables the device
> to disambiguate between being suspended for inactivity (runtime IDLE)
> and being suspended because the system is entering S3 or Connected
> Standby.
The current implementation would set the latency to normal on device initialization,
but we didn't set the device to high latency on suspend.
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Palm ejection stops working on some Elan and Synaptics touchpad after
commit 40d5bb8737 ("HID: multitouch: enable multi-input as a quirk for
some devices").
The commit changes the mt_class from MT_CLS_WIN_8 to
MT_CLS_WIN_8_FORCE_MULTI_INPUT, so MT_QUIRK_CONFIDENCE isn't applied
anymore.
So also apply the quirk since MT_CLS_WIN_8_FORCE_MULTI_INPUT is
essentially MT_CLS_WIN_8.
Fixes: 40d5bb8737 ("HID: multitouch: enable multi-input as a quirk for some devices")
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Currently custom sensors properties are not decoded and it is up to
user space to interpret.
Some manufacturers already standardized the meaning of some custom sensors.
They can be presented as a proper IIO sensor. We can identify these sensors
based on manufacturer and serial number property in the report.
This change is identifying hinge sensor when the manufacturer is "INTEL".
This creates a platform device so that a sensor driver can be loaded to
process these sensors.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20201215054444.9324-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Goodix i2c-hid touchscreens are mostly i2c-hid compliant but have some
special power sequencing requirements, including the need to drive a
reset line during the sequencing.
Let's use the new rejiggering of i2c-hid to support this with a thin
wrapper driver to support the first Goodix i2c-hid touchscreen:
GT7375P
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patch rejiggers the i2c-hid code so that the OF (Open Firmware
aka Device Tree) and ACPI support is separated out a bit. The OF and
ACPI drivers are now separate modules that wrap the core module.
Essentially, what we're doing here:
* Make "power up" and "power down" a function that can be (optionally)
implemented by a given user of the i2c-hid core.
* The OF and ACPI modules are drivers on their own, so they implement
probe / remove / suspend / resume / shutdown. The core code
provides implementations that OF and ACPI can call into.
We'll organize this so that we now have 3 modules: the old i2c-hid
module becomes the "core" module and two new modules will depend on
it, handling probing the specific device.
As part of this work, we'll remove the i2c-hid "platform data"
concept since it's not needed.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This new feature present in new devices replaces the old Battery Level Status
(0x1000) feature. It keeps essentially the same information for levels
(reporting critical, low, good and full) but makes these levels optional, the
device exports a capability setting which describes which levels it supports.
In addition to this, there is an optional state_of_charge paramenter that
exports the battery percentage.
This patch adds support for this new feature. There were some implementation
choices, as described below and in the code.
If the device supports the state_of_charge parameter, we will just export the
battery percentage and not the levels, which the device might still support.
Since this feature can co-exist with the Battery Voltage (0x1001) feature and
we currently only support one battery feature, I changed the battery feature
discovery to try to use 0x1000 and 0x1004 first and only then 0x1001, the
battery voltage feature.
In the future we could uncouple this and make the battery feature co-exists
with 0x1000 and 0x1004, allowing the device to export voltage information in
addition to the battery percentage or level.
I tested this patch with a MX Anywhere 3, which supports the new feature. Since
I don't have any device that doesn't support the state_of_charge parameter of
this feature, I forced the MX Anywhere 3 to use the level information, instead
of battery percentage, to test that part of the implementation.
I also tested with a MX Master 3, which supports the Battery Level Status
(0x1000) feature, and a G703 Hero, which supports the Battery Voltage (0x1001)
feature, to make sure nothing broke there.
[jkosina@suse.cz: fix comment]
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit adds support for tilt on Standard Guitar Hero PS3 Guitars, and GH3
PC Guitars, mapping it to ABS_RY.
Note that GH3 PC Guitars are identical, only they use different VID and PIDs.
Also note that vendor id 0x12ba is used by a variety of different rhythm
controllers on the ps3.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID subsystem allows an "HID report field" to have a different
number of "values" and "usages" when it is allocated. When a field
struct is created, the size of the usage array is guaranteed to be at
least as large as the values array, but it may be larger. This leads to
a potential out-of-bounds write in
__hidinput_change_resolution_multipliers() and an out-of-bounds read in
hidinput_count_leds().
To fix this, let's make sure that both the usage and value arrays are
the same size.
Cc: stable@vger.kernel.org
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its
product ID to the table so we can get battery monitoring support.
(The hid-logitech-hidpp driver already recognizes it when connected via
a Unifying Receiver.)
[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some Chicony's keyboards support airplane mode hotkey (Fn+F2) with
"Wireless Radio Control" feature. For example, the wireless keyboard
[04f2:1236] shipped with ASUS all-in-one desktop.
After consulting Chicony for this hotkey, learned the device will send
with 0x11 as the report ID and 0x1 as the value when the key is pressed
down.
This patch maps the event as KEY_RFKILL.
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is being reported for the Elan touchscreen on ASUS
UX550 laptops despite not having a batter. It always shows either 0 or
1%.
Signed-off-by: Seth Miller <miller.seth@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested. The device gets correctly exported to userspace and I can see
mouse and keyboard events.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Prevent invalid (0, 0) inputs to hid-core's snto32() function.
Maybe it is just the dummy device here that is causing this, but
there are hundreds of calls to snto32(0, 0). Having n (bits count)
of 0 is causing the current UBSAN trap with a shift value of
0xffffffff (-1, or n - 1 in this function).
Either of the value to shift being 0 or the bits count being 0 can be
handled by just returning 0 to the caller, avoiding the following
complex shift + OR operations:
return value & (1 << (n - 1)) ? value | (~0U << n) : value;
Fixes: dde5845a52 ("[PATCH] Generic HID layer - code split")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+1e911ad71dd4ea72e04a@syzkaller.appspotmail.com
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
After more discussions with the [libinput project][1], it has been
determined that the uclogic driver provides better support for this
tablet. Fortunately, the Trust Panora is physically and logically
identical with the UGEE G5, despite having a different USB vendor and
product ID.
[1]: https://gitlab.freedesktop.org/libinput/libinput/-/issues/482
Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
See Documentation/core-api/printk-formats.rst.
h should no longer be used in the format specifier for printk.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When OOB is disabled, FW will be power gated when system is in S3/S4/S5
which is the same behavior with legacy ISH FW.
When OOB is enabled, FW will always power on which is totally different
comparing to legacy ISH FW.
So NO_D3 flag is not enough to check FW's status after resume.
Here we can use IPC FW status register to check host link status.
If it is false, it means FW get reset after power gated, need go through
the whole initialization flow; If it is true, it means FW is alive, just
set host ready bit to let fw know host is up.
Co-developed-by: Wei Jiang <wei.w.jiang@intel.com>
Signed-off-by: Wei Jiang <wei.w.jiang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
Once wakeup, BIOS will clear the wakeup bit to identify wakeup is
successful. So driver need to re-enable it in resume function to
keep the next wakeup capability.
Since this feature is only present on EHL, we use EHL PCI device id to
enable this feature.
Co-developed-by: Najumon Ba <najumon.ba@intel.com>
Signed-off-by: Najumon Ba <najumon.ba@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without crc32 support, this driver fails to link:
arm-linux-gnueabi-ld: drivers/hid/hid-sony.o: in function `sony_raw_event':
hid-sony.c:(.text+0x8f4): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: hid-sony.c:(.text+0x900): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/hid/hid-sony.o:hid-sony.c:(.text+0x4408): more undefined references to `crc32_le' follow
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new driver uses a phys_addr_t to store a DMA address,
which does not work when the two are different size:
drivers/hid/amd-sfh-hid/amd_sfh_client.c:157:11: error: incompatible pointer types passing 'phys_addr_t *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
&cl_data->sensor_phys_addr[i],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:393:15: note: passing argument to parameter 'dma_handle' here
dma_addr_t *dma_handle, gfp_t gfp)
^
Change both the type and the variable name to dma_addr for consistency.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pointstick and its left/right buttons on HP EliteBook 850 G7 need
multi-input quirk to work correctly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- increase of maximum HID report size to 16KB in order to support
some of the modern devices, from Dean Camera
- control interface support for hidraw, from Dean Camera
- stylus battery reporting improvement, from Dmitry Torokhov
From Sandeep Singh.
AMD SFH (Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2 processor
(MP2 which is an ARM core connected to x86 for processing sensor data) and it
runs on MP2 where in the driver resides on X86. The driver functionalities are
divided into three parts:
1: amd-mp2-pcie:- This part of the module will communicate with MP2
firmware. MP2 which is exposed as a PCI device to the
X86, uses mailboxes to talk to MP2 firmware to
send/receive commands.
2: Client Layer:- This part of the driver will use DRAM data and convert
the data into HID format based on HID reports.
3: Transport layer :- This part of the driver the will communicate with HID
core.Communication between devices and HID core is
mostly done via HID reports
In terms of architecture, it resembles like ISH (Intel Integrated Sensor Hub).
However the major difference is all the hid reports are generated as part of
the kernel driver.
AMD SFH is integrated as a part of SoC, starting from 17h family of processors.
The solution is working well on several OEM products. AMD SFH uses HID over
PCIe bus.
This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Cc: stable@vger.kernel.org
Signed-off-by: Julian Sax <jsbc@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the hid-ite driver handle the Acer S1002 keyboard-dock, this
leads to 2 improvements:
1. The non working wifi-toggle hotkey now works.
2. Toggling the touchpad on of with the hotkey will no show OSD
notifications in e.g. GNOME3. The actual toggling is handled inside
the keyboard, this adds support for notifying evdev listeners about this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit adds support for the Guitar Hero Live PS3 and Wii U dongles.
These dongles require a "magic" USB control message [1] to be sent
approximately every 10 seconds otherwise the dongle will not report
events where the strumbar is hit while a fret is being held.
Also, inspired by a patch sent on linux-input by Sanjay Govind [2], the
accelerometer is mapped to ABS_RY for tilt.
Interestingly, the Wii U and PS3 dongles share the same VID and PID.
[1] https://github.com/ghlre/GHLtarUtility/
[2] https://marc.info/?l=linux-input&m=157242835928542&w=2
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the hidraw module can only read and write feature HID reports on
demand, via dedicated ioctls. Input reports are read from the device through
the read() interface, while output reports are written through the write
interface().
This is insufficient; it is desirable in many situations to be able to read and
write input and output reports through the control interface to cover
additional scenarios:
- Reading an input report by its report ID, to get initial state
- Writing an input report, to set initial input state in the device
- Reading an output report by its report ID, to obtain current state
- Writing an output report by its report ID, out of band
This patch adds these missing ioctl requests to read and write the remaining
HID report types. Note that not all HID backends will neccesarily support this
(e.g. while the USB link layer supports setting Input reports, others may not).
Also included are documentation and example updates. The current hidraw
documentation states that feature reports read from the device does *not*
include the report ID, however this is not the case and the returned report
will have its report ID prepended by conforming HID devices, as the report data
sent from the device over the control endpoint must be indentical in format to
those sent over the regular transport.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Mayflash/Dragonrise seems to have yet another device ID for one of their
Gamecube controller adapters. Previous to this commit, the adapter
registered only one /dev/input/js* device, and all controller inputs (from
any controller) were mapped to this device. This patch defines the 1846
USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which
fixes that (with the patch, four /dev/input/js* devices are created, one
for each of the four controller ports).
Signed-off-by: Ethan Warth <redyoshi49q@gmail.com>
Tested-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Enables three buttons (Fn1, Fn2, and Fn3) on the ELECOM M-XGL20DLBK
wireless mouse.
While this mouse is EX-G brand, report descriptor is a bit different
from EX-G trackball mouse. To enable extra buttons, report should be
rewritten in a similar way to trackballs, but with different position
parameters.
Signed-off-by: YOSHIOKA Takuma <lo48576@hard-wi.red>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The report descriptor for EX-G wireless mouse (M-XGL20DLBK) is a bit
different from that for trackball mice such as DEFT. For such mouse, the
current `mouse_button_fixup` cannot be used as is, because it uses
hard-coded indices for a report descriptor.
Add parameters to `mouse_button_fixup` function, in order to support
fixing report descriptors for more models.
Signed-off-by: YOSHIOKA Takuma <lo48576@hard-wi.red>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These are never modified, so make them const to allow the compiler to put
them in read-only memory. It also allows the compiler to shrink the
resulting module with ~900 bytes, test-built with gcc 10.2 on x86_64.
text data bss dec hex filename
204377 42832 576 247785 3c7e9 drivers/hid/wacom_old.ko
204240 42064 576 246880 3c460 drivers/hid/wacom_new.ko
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a goto statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a couple of break statements instead
of letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech V470 bluetooth mouse supports HID++-1.0 over bluetooth,
add its id to the hidpp driver so that it handles it.
This enables battery monitoring support.
Note this mouse does not support hi-resolution scroll-wheel events.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This assignment to rv is unused in an error path. So remove it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid-sony driver has custom DS4 connect/disconnect logic for the
DS4 dongle, which is a USB dongle acting as a proxy to Bluetooth
connected DS4.
The connect/disconnect logic works fine generally, however not in
conjunction with Steam. Steam implements its own DS4 driver using
hidraw. Both hid-sony and Steam are issuing their own HID requests
and are racing each other during DS4 dongle connect/disconnect
resulting in a kernel crash in hid-sony.
The problem is that upon a DS4 connect to the dongle, hid-sony kicks
of 'ds4_get_calibration_data' from within its dongle hotplug code.
The calibration code issues raw HID feature report for reportID 0x02.
When Steam is running, it issues a feature report for reportID 0x12
typically just prior to hid-sony requesting feature reportID 0x02.
The result is that 'ds4_get_calibration_data' receives the data Steam
requested as that's the HID report returing first. Currently this
results in it processing invalid data, which ultimately results in a
divide by zero upon a future 'dualshock4_parse_report'.
The solution for now is to check within 'ds4_get_calibration_data' to
check if we received data for the feature report we issued and if not
retry. This fixes bug 206785.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 dongle reports fw_version and hw_version as 0 when no actual
DS4 is connected to it. This prevents cleaning up sysfs nodes upon
device remove.
This patch decouples sysfs cleanup from the fw_version and hw_version
values by introducing boolean values.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch moves the power supply status logic to DS3/DS4 parse_report,
to allow for more accurate DS4 status reporting.
The DS4 power status code was actually incorrect, but reported okay'ish
data in most cases. There was a different interpretation of the battery_info
values 0-10 or 0-9 depending on cable state. It added +1 to extend the range
to 0-10. This is actually incorrect, there is no different range. Values
higher than 11 actually indicates 'full' and 14/15 'error' for which we
reported 100% and a valid power state.
Moving the status logic to parse_report avoids having to pass more state
to the generic sony_battery_get_property and simplifies the code.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- Various functionality / regression fixes for Logitech devices from
Hans de Goede
- Fix for (recently added) GPIO support in mcp2221 driver from Lars
Povlsen
- Power management handling fix/quirk in i2c-hid driver for certain
BIOSes that have strange aproach to power-cycle from Hans de Goede
- a few device ID additions and device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
HID: Add Logitech Dinovo Edge battery quirk
HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
HID: mcp2221: Fix GPIO output handling
HID: hid-sensor-hub: Fix issue with devices with no report ID
HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
HID: add support for Sega Saturn
HID: cypress: Support Varmilo Keyboards' media hotkeys
HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
HID: logitech-hidpp: Add PID for MX Anywhere 2
HID: uclogic: Add ID for Trust Flex Design Tablet
Some users are pairing the Dinovo keyboards with the MX5000 or MX5500
receivers, instead of with the Dinovo receivers. The receivers are
mostly the same (and the air protocol obviously is compatible) but
currently the Dinovo receivers are handled by hid-lg.c while the
MX5x00 receivers are handled by logitech-dj.c.
When using a Dinovo keyboard, with its builtin touchpad, through
logitech-dj.c then the touchpad stops working because when asking the
receiver for paired devices, we get only 1 paired device with
a device_type of REPORT_TYPE_KEYBOARD. And since we don't see a paired
mouse, we have nowhere to send mouse-events to, so we drop them.
Extend the existing fix for the Dinovo Edge for this to also cover the
Dinovo Mini keyboard and also add a mapping to logitech-hidpp for the
Media key on the Dinovo Mini, so that that keeps working too.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1811424
Fixes: f2113c3020 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fix an error in the mouse / INPUT(2) descriptor used for quad/bt2.0 combo
receivers. Replace INPUT with INPUT (Data,Var,Abs) for the field for the
4 extra buttons which share their report-byte with the low-res hwheel.
This is likely a copy and paste error. I've verified that the new
0x81, 0x02 value matches both the mouse descriptor for the currently
supported MX5000 / MX5500 receivers, as well as the INPUT(2) mouse
descriptors for the Dinovo receivers for which support is being
worked on.
Cc: stable@vger.kernel.org
Fixes: f2113c3020 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Currently the check for the error return code -ERESTARTSYS is dead code
and never executed because a previous check for ret < 0 is catching this
and returning -ETIMEDOUT instead. Fix this by checking for -ERESTARTSYS
before the more generic negative error code.
Addresses-Coverity: ("Logically dead code")
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The battery status is also being reported by the logitech-hidpp driver,
so ignore the standard HID battery status to avoid reporting the same
info twice.
Note the logitech-hidpp battery driver provides more info, such as properly
differentiating between charging and discharging. Also the standard HID
battery info seems to be wrong, reporting a capacity of just 26% after
fully charging the device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Like the MX5000 and MX5500 quad/bluetooth keyboards the Dinovo Edge also
needs the HIDPP_CONSUMER_VENDOR_KEYS quirk for some special keys to work.
Specifically without this the "Phone" and the 'A' - 'D' Smart Keys do not
send any events.
In addition to fixing these keys not sending any events, adding the
Bluetooth match, so that hid-logitech-hidpp is used instead of the
generic HID driver, also adds battery monitoring support when the
keyboard is connected over Bluetooth.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Some quad/bluetooth keyboards, such as the Dinovo Edge (Y-RAY81) have a
builtin touchpad. In this case when asking the receiver for paired devices,
we get only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD.
This means that we do not instantiate a second dj_hiddev for the mouse
(as we normally would) and thus there is no place for us to forward the
mouse input reports to, causing the touchpad part of the keyboard to not
work.
There is no way for us to detect these keyboards, so this commit adds
an array with device-ids for such keyboards and when a keyboard is on
this list it adds STD_MOUSE to the reports_supported bitmap for the
dj_hiddev created for the keyboard fixing the touchpad not working.
Using a list of device-ids for this is not ideal, but there are only
very few such keyboards so this should be fine. Besides the Dinovo Edge,
other known wireless Logitech keyboards with a builtin touchpad are:
* Dinovo Mini (TODO add its device-id to the list)
* K400 (uses a unifying receiver so is not affected)
* K600 (uses a unifying receiver so is not affected)
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1811424
Fixes: f2113c3020 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to
be set explicitly with this flag.
Signed-off-by: Chris Ye <lzye@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mcp2221 driver GPIO output handling has has several issues.
* A wrong value is used for the GPIO direction.
* Wrong offsets are calculated for some GPIO set value/set direction
operations, when offset is larger than 0.
This has been fixed by introducing proper manifest constants for the
direction encoding, and using 'offsetof' when calculating GPIO
register offsets.
The updated driver has been tested with the Sparx5 pcb134/pcb135
board, which has the mcp2221 device with several (output) GPIO's.
Fixes: 328de1c519 ("HID: mcp2221: add GPIO functionality support")
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.
Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are styluses that only report their battery status when they are
touching the touchscreen; additionally we currently suppress battery
reports if capacity has not changed. To help userspace recognize how long
ago the device reported battery status, let's send the change event through
if either capacity has changed, or at least 30 seconds have passed since
last report we've let through.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It appears like the accelerometer/magnetometer and gyroscope indices were
interchanged in the patch series which got into for-5.11/amd-sfh-hid until
Mandoli/Richard reported to us. Ideally sensor indices should be 0,1,2 for the
accelerometer, Gyroscope, Magnetometer respectively, but this interchanged
possibly could be because i was using a test MP2 firmware on my machine.
This patch fixes the earlier commit with the right sensor indices and also
removing unused structures _hid_report_descriptor, _hid_device_descriptor as
reported by Richard.
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub 4f567b9f8141")
Reported-by: Mandoli <lipheng@hanmail.net>
Reported-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ASUS N-Key keyboard uses the productId of 0x1866 and is used in
almost all modern ASUS gaming laptops with slight changes to the
firmware. This patch enables: Fn+key hotkeys, keyboard backlight
brightness control.
Additionally this keyboard requires the LED interface to be
initialized before such things as keyboard backlight control work.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The i2c-hid driver would quietly fail to probe the i2c-hid sensor-hub
with an ACPI device-id of SMO91D0 every other boot.
Specifically, the i2c_smbus_read_byte() "Make sure there is something at
this address" check would fail every other boot.
It seems that the BIOS does not properly reset/power-cycle the device
leaving it in a confused state where it refuses to respond to i2c-xfers.
On boots where probing the device failed, the driver-core puts the device
in D3 after the probe-failure, which causes the probe to succeed the next
boot.
Putting the device in D3 from the shutdown-handler fixes the sensors not
working every other boot.
This has been tested on both a Lenovo Miix 2-10 and a Dell Venue 8 Pro 5830
both of which use an i2c-hid sensor-hub with an ACPI id of SMO91D0.
Note that it is safe to call acpi_device_set_power() with a NULL pointer
as first argument, so on none ACPI enumerated devices this change is a
no-op.
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace
in a consistent way.
Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.
More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.
Some notes:
* There seem to be multiple variants of the VA104M keyboard. This
patch specifically targets 04b4:07b1 variant.
* The device works out-of-the-box on Windows platform with the generic
consumer control device driver (hidserv.inf). This suggests that
Windows either ignores the Logical Minimum/Logical Maximum or
interprets the Usage ID assignment differently from the linux
implementation; Maybe there are other devices out there that only
works on Windows due to this problem?
Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The usb-hid keyboard-dock for the Acer Switch 10 SW5-012 model declares
an application and hid-usage page of 0x0088 for the INPUT(4) report which
it sends. This reports contains 2 8-bit fields which are declared as
HID_MAIN_ITEM_VARIABLE.
The keyboard-touchpad combo never actually generates this report, except
when the touchpad is toggled on/off with the Fn + F7 hotkey combo. The
toggle on/off is handled inside the keyboard-dock, when the touchpad is
toggled off it simply stops sending events.
When the touchpad is toggled on/off an INPUT(4) report is generated with
the first content byte set to 120/121, before this commit the kernel
would report this as ABS_MISC 120/121 events.
Patch the descriptor to replace the HID_MAIN_ITEM_VARIABLE with
HID_MAIN_ITEM_RELATIVE (because no key-presss release events are send)
and add mappings for the 0x00880078 and 0x00880079 usages to generate
touchpad on/off key events when the touchpad is toggled on/off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Communication between HID devices and HID core is mostly done
via HID reports. HID reports are formed based on the data received
from the PCI layer into the HID report descriptors.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To support AMD Sensor Fusion Hub (SFH) via the HID client's we need to
register the client with the HID framework. Here we mostly address on
how to register the client with the framework and define the interfaces
for communication.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
AMD SFH (Sensor Fusion Hub) is a solution running on MP2
(which is ARM core connected to x86 for processing sensor data).
AMD SFH uses HID over PCI bus to form the HID descriptors and
talks to HID clients like the monitor-sensor/iio-proxy. MP2 which
is exposed as a PCI device to the x86, uses mailboxes to talk to
MP2 firmware to send/receive commands.
Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It seems that the PID 0x4072 was missing from the list Logitech gave me
for this mouse, as I found one with it in the wild (with which I tested
this patch).
Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Signed-off-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Trust Flex Design Tablet has an UGTizer USB ID and requires the same
initialization as the UGTizer GP0610 to be detected as a graphics tablet
instead of a mouse.
Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
Pull HID updates from Jiri Kosina:
- Lenovo X1 Tablet support improvements from Mikael Wikström
- "heartbeat" report fix for several Wacom devices from Jason Gerecke
- bounds checking fix in hid-roccat from Dan Carpenter
- stylus battery reporting fix from Dmitry Torokhov
- i2c-hid support for wakeup from suspend-to-idle from Kai-Heng Feng
- new driver for Vivaldi devices from Sean O'Brien
- other assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle
HID: add vivaldi HID driver
HID: hid-input: fix stylus battery reporting
HID: wacom: Avoid entering wacom_wac_pen_report for pad / battery
HID: i2c-hid: fix kerneldoc warnings in i2c-hid-core.c
HID: core: fix kerneldoc warnings in hid-core.c
HID: multitouch: Lenovo X1 Tablet Gen2 trackpoint and buttons
HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons
HID: alps: clean up indentation issue
HID: intel-ish-hid: simplify the return expression of ishtp_bus_remove_device()
HID: hid-debug: fix nonblocking read semantics wrt EIO/ERESTARTSYS
HID: i2c-hid: Prefer asynchronous probe
HID: ite: Add USB id match for Acer One S1003 keyboard dock
HID: roccat: add bounds checking in kone_sysfs_write_settings()
HID: wiimote: narrow spinlock range in wiimote_hid_event()
HID: wiimote: make handlers[] const
HID: apple: Add support for Matias wireless keyboard
HID: cp2112: Use irqchip template
Many laptops can be woken up from Suspend-to-Idle by touchpad. This is
also the default behavior on other OSes.
However, if touchpad and touchscreen contact to each other when lid is
closed, wakeup events can be triggered inadventertly.
So let's disable the wakeup by default, but enable the wakeup capability
so users can enable it at their own discretion.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+FqrsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXnN8B/4sRg7j9OTzVBlDiXF2vj6vbuplTIH6
JR6S5f4PNjUg4gV6ghzSnsx1zqNhPSOr78zDqYto8vv+wqqj3thmld8+gAnSbKtt
yoAa7mhbbN1ryJiwPlZzvX4ApzGZPC7byqEi3+zPIcag6TEl8eyYJOmvY3x1zv8x
CsAb57oCC4erD0n4xlTyfuc8TLpO+EiU53PXbR9AovKQHe4m2/8LWyEbmrm5cRUR
gx8RxoLkkrqK0unzcmanbm47QodiaOTUpycs3IvaBeWZQsqSgFZdI1RAdTZNg+U+
GT8eMRXAwpgDpilPm/0n1O0PKGAsVh9Lbw8Btb/ggqnjTUlA4Z3Df23E
=Wy5n
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- a series from Boqun Feng to support page size larger than 4K
- a few miscellaneous clean-ups
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions
x86/hyperv: Remove aliases with X64 in their name
PCI: hv: Document missing hv_pci_protocol_negotiation() parameter
scsi: storvsc: Support PAGE_SIZE larger than 4K
Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes
HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes
Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes
hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication
hv: hyperv.h: Introduce some hvpfn helper functions
Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header
Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs()
Drivers: hv: vmbus: Introduce types of GPADL
Drivers: hv: vmbus: Move __vmbus_open()
Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl
drivers: hv: remove cast from hyperv_die_event
f30_data in rmi_device_platform_data could be also referenced by RMI
function 3A, so rename it and the structure name to avoid confusion.
Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20200930094147.635556-2-vincent.huang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add vivaldi HID driver. This driver allows us to read and report the top
row layout of keyboards which provide a vendor-defined (Google) HID
usage.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
PCI devices support two variants of the D3 power state: D3hot (main power
present) D3cold (main power removed). Previously struct pci_dev contained:
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
"d3_delay" refers specifically to the D3hot state. Rename it to
"d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for
Specifying Device Readiness Durations" in the PCI Firmware spec r3.2,
sec 4.6.9.
There is no change to the functionality.
Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For a Hyper-V vmbus, the size of the ringbuffer has two requirements:
1) it has to take one PAGE_SIZE for the header
2) it has to be PAGE_SIZE aligned so that double-mapping can work
VMBUS_RING_SIZE() could calculate a correct ringbuffer size which
fulfills both requirements, therefore use it to make sure vmbus work
when PAGE_SIZE != HV_HYP_PAGE_SIZE (4K).
Note that since the argument for VMBUS_RING_SIZE() is the size of
payload (data part), so it will be minus 4k (the size of header when
PAGE_SIZE = 4k) than the original value to keep the ringbuffer total
size unchanged when PAGE_SIZE = 4k.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200916034817.30282-10-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With commit 4f38821772 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.
Fixes: 4f38821772 ("HID: hid-input: clear unmapped usages")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Tested-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It has recently been reported that the "heartbeat" report from devices
like the 2nd-gen Intuos Pro (PTH-460, PTH-660, PTH-860) or the 2nd-gen
Bluetooth-enabled Intuos tablets (CTL-4100WL, CTL-6100WL) can cause the
driver to send a spurious BTN_TOUCH=0 once per second in the middle of
drawing. This can result in broken lines while drawing on Chrome OS.
The source of the issue has been traced back to a change which modified
the driver to only call `wacom_wac_pad_report()` once per report instead
of once per collection. As part of this change, pad-handling code was
removed from `wacom_wac_collection()` under the assumption that the
`WACOM_PEN_FIELD` and `WACOM_TOUCH_FIELD` checks would not be satisfied
when a pad or battery collection was being processed.
To be clear, the macros `WACOM_PAD_FIELD` and `WACOM_PEN_FIELD` do not
currently check exclusive conditions. In fact, most "pad" fields will
also appear to be "pen" fields simply due to their presence inside of
a Digitizer application collection. Because of this, the removal of
the check from `wacom_wac_collection()` just causes pad / battery
collections to instead trigger a call to `wacom_wac_pen_report()`
instead. The pen report function in turn resets the tip switch state
just prior to exiting, resulting in the observed BTN_TOUCH=0 symptom.
To correct this, we restore a version of the `WACOM_PAD_FIELD` check
in `wacom_wac_collection()` and return early. This effectively prevents
pad / battery collections from being reported until the very end of the
report as originally intended.
Fixes: d4b8efeb46 ("HID: wacom: generic: Correct pad syncing")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix following warnings caused by mismatch bewteen function parameters
and comments.
drivers/hid/i2c-hid/i2c-hid-core.c:331: warning: Function parameter or member 'data_len' not described in 'i2c_hid_set_or_send_report'
drivers/hid/i2c-hid/i2c-hid-core.c:331: warning: Excess function parameter 'len' description in 'i2c_hid_set_or_send_report'
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix following warnings caused by mismatch bewteen function parameters
and comments.
drivers/hid/hid-core.c:931: warning: Function parameter or member 'hid' not described in 'hid_parse_report'
drivers/hid/hid-core.c:931: warning: Excess function parameter 'device' description in 'hid_parse_report'
drivers/hid/hid-core.c:961: warning: Function parameter or member 'hid' not described in 'hid_validate_values'
drivers/hid/hid-core.c:961: warning: Excess function parameter 'device' description in 'hid_validate_values'
drivers/hid/hid-core.c:1452: warning: Function parameter or member 'report' not described in 'hid_match_report'
drivers/hid/hid-core.c:1452: warning: Excess function parameter 'report_type' description in 'hid_match_report'
drivers/hid/hid-core.c:2132: warning: Function parameter or member 'drv' not described in 'new_id_store'
drivers/hid/hid-core.c:2132: warning: Excess function parameter 'driver' description in 'new_id_store'
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen2.
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3.
It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is an if statement that is indented too deeply, fix this by removing the
extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the file has been open in non-blocking mode, EIO or ERESTARTSYS
would never be returned even if they should (for example when device
has been unplugged, you want EIO and not EAGAIN to be returned).
Move the O_NONBLOCK check after other checks have been performed.
Based on similar to patches hidraw and hiddev by Founder Fang
<founder.fang@gmail.com> and Jiri Kosina <jkosina@suse.cz>.
Signed-off-by: Laurent Gauthier <laurent.gauthier@soccasys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding printouts to the i2c_hid_probe() function shows that it takes
quite some time. It used to take about 70 ms, but after commit
eef4016243 ("HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON
commands") it takes about 190 ms. This is not tons of time but it's
not trivial. Because we haven't yet specified that we'd prefer
asynchronous probe for this driver then, if the driver is builtin to
the kernel, we'll wait for this driver to finish before we start
probes for more drivers. Let's set the flag to enable asynchronous
for this driver so that other drivers aren't blocked from probing
until we finish.
Since this driver can be configured as a module and modules are
always asynchronously probed this is quite a safe change and will
benefit anyone who has a reason to build this driver into the kernel
instead of using it as a module.
[jkosina@suse.cz: drop spurious whitespace addition]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer One S1003 2-in-1 keyboard dock uses a Synaptics S910xx touchpad
which is connected to an ITE 8910 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with ITE keyboard chips, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard. Note that like for the
Acer Aspire Switch 10 (SW5-012) the id-table entry matches on the
HID_GROUP_GENERIC generic group so that hid-ite only binds to the
keyboard interface and the mouse/touchpad interface is left untouched
so that hid-multitouch can bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This code doesn't check if "settings->startup_profile" is within bounds
and that could result in an out of bounds array access. What the code
does do is it checks if the settings can be written to the firmware, so
it's possible that the firmware has a bounds check? It's safer and
easier to verify when the bounds checking is done in the kernel.
Fixes: 14bf62cde7 ("HID: add driver for Roccat Kone gaming mouse")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into patchwork
Linux 5.9-rc4
* tag 'v5.9-rc4': (1001 commits)
Linux 5.9-rc4
io_uring: fix linked deferred ->files cancellation
io_uring: fix cancel of deferred reqs with ->files
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
...
In `wiimote_hid_event()`, the `wdata->state.lock` spinlock does not need
to be held while searching `handlers[]` for a suitable handler function.
Change it so the spinlock is only held during the call to the handler
function itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The `handlers[]` array contents are never modified, so use the `const`
qualifier.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.
Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.
Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.
This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull HID fixes from Jiri Kosina:
- data sanitization and validtion fixes for report descriptor parser
from Marc Zyngier
- memory leak fix for hid-elan driver from Dinghao Liu
- two device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: Sanitize event code and type when mapping input
HID: core: Correctly handle ReportSize being zero
HID: elan: Fix memleak in elan_input_configured
HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.
Detect the corner case and correctly compute the size.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- regression fix / revert of a commit that intended to reduce probing
delay by ~50ms, but introduced a race that causes quite a few devices
not to enumerate, or get stuck on first IRQ
- buffer overflow fix in hiddev, from Peilin Ye
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "HID: usbhid: do not sleep when opening device"
HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()
HID: quirks: Always poll three more Lenovo PixArt mice
HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands
HID: macally: Constify macally_id_table
HID: cougar: Constify cougar_id_table
This reverts commit d313279228.
This patch causes a regression with quite a few devices, as probing fails
because of the race where the first IRQ is dropped on the floor (after
hid_device_io_start() happens, but before the 50ms timeout passess), and
report descriptor never gets parsed and populated.
As this is just a boot time micro-optimization, let's revert the
patch for 5.9 now, and fix this properly eventually for next merge
window.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208935
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Reported-by: Marius Zachmann <mail@mariuszachmann.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Matias Wireless keyboard has an Apple like layout and identifies
as ISO RevB Alu keyboard. Use hid-apple for it so Fn key and media
control functions work as expected.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before this commit i2c_hid_parse() consists of the following steps:
1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor
Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.
Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.
In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:
hid-generic 0018:0911:5288.0002: unknown main item tag 0x0
At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.
Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.
This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: Andrea Borgia <andrea@borgia.bo.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add(). The irqchip is
instead added while adding the gpiochip.
Cc: Eudean Sun <eudean@arista.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
macally_id_table is not modified and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
cougar_id_table[] is not changed and can be made const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- fix for some modern devices that return multi-byte battery report,
from Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
- other small assorted fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: add NOGET quirk for Logitech GROUP
HID: Replace HTTP links with HTTPS ones
HID: udraw-ps3: Replace HTTP links with HTTPS ones
HID: mcp2221: Replace HTTP links with HTTPS ones
HID: input: Fix devices that return multiple bytes in battery report
HID: lenovo: Fix spurious F23 key press report during resume from suspend
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support
HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic
HID: lenovo: Factor out generic parts of the LED code
HID: lenovo: Merge tpkbd and cptkbd data structures
HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
HID: Wiimote: Treat the d-pad as an analogue stick
HID: input: do not run GET_REPORT unless there's a Resolution Multiplier
HID: usbhid: remove redundant assignment to variable retval
HID: usbhid: do not sleep when opening device
- fix for some modern devices that return multi-byte battery report, from
Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
Add HID_QUIRK_NOGET for Logitech GROUP device.
Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- linked list race condition fix in hid-steam driver from Rodrigo Rivas
Costa
- assorted deviceID-specific quirks and other small cosmetic cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid repeated "multiplier = " log messages
HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff
HID: quirks: Ignore Simply Automated UPB PIM
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
MAINTAINERS: update uhid and hid-wiimote entry
HID: steam: fixes race in handling device list.
HID: magicmouse: do not set up autorepeat
HID: alps: support devices with report id 2
HID: quirks: Always poll Obins Anne Pro 2 keyboard
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.
When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.
This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Darren Hart <darren@dvhart.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Ultrabook Keyboard sends a spurious F23 key-press when resuming
from suspend. GNOME uses F23 to toggle the touchpad on/off so this causes
the OSD graphics for the touchpad toggle to show on resume.
The keyboard does not actually have a F23 key, se we can simple fix it
by marking the 0x00070072 HID usage, which normally is F23, to be ignored.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for setting the Fn lock value of the ThinkPad 10 Ultrabook
Keyboard through sysfs, re-using the fn_lock sysfs attribute read/write
helpers from the existing ThinkPad Compact Keyboard with TrackPoint
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some of the function keys special functions all use the same
0x000c0001 usage code, add a mapping for these based on the usage_index;
And add support for the Speaker and Mic mute LEDs integrated into the
F1 and F4 keys.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Except for a single call, there is nothing keyboard-model specific about
the cptkbd fn_lock sysfs attr handlers, rename them dropping the cptkbd
post-/pre-fix, so that they can be re-used for supporting Fn-lock on the
Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor out the generic parts of the tpkbd LED code, so that they can be
re-used for supporting the LEDs on the Thinkpad 10 ultrabook kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Merge the tpkbd and cptkbd data structures, into a single unified
structure instead of having a separate data structure per keyboard type.
This is a preparation patch for making the tpkbd LED functions more
generic, so that they can be re-used for supporting the LEDs on the
Thinkpad 10 ultrabook keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These messages appear each time the mouse wakes from sleep, in my case
(Logitech M705), every minute or so.
Let's downgrade them to the "debug" level so they don't fill the kernel log
by default.
While we are at it, let's make clear that this is a wheel multiplier (and
not, for example, XY movement multiplier).
Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some parts of hid-logitech-dj explicitly referred to 0xff for the
receiver index. This patch changes those references to the
HIDPP_RECEIVER_INDEX definition.
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
PCI_DEV_FLAGS_NO_D3 should not be used outside of PCI core.
Instead, we can use pci_save_state() to hint PCI core that the device
should stay at D0 during suspend. By doing so, PCI core will let the
upstream bridges also stays at D0 so the entire hierarchy is in the
correct power state as PCI spec mandates.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As this is a cypress HID->COM RS232 style device that is handled
by the cypress_M8 driver we also need to add it to the ignore list
in hid-quirks.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.
Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The controllers from the Super Nintendo Classic Edition (AKA the SNES
Mini) appear as a Classic Controller Pro when connected to a Wii
Remote. All the buttons work as the same, with the d-pad being mapped
the same as the d-pad on the Classic Controller Pro. This differs from
the behaviour of most controllers with d-pads and no analogue sticks,
where the d-pad maps to ABS_HAT1X for left and right, and ABS_HAT1Y
for up and down. This patch adds an option to the hid-wiimote module
to make the Super Nintendo Classic Controller behave this way.
The patch has been tested with a Super Nintendo Classic Controller
plugged into a Wii Remote in both with the option both enabled and
disabled. When enabled the d-pad acts as the analogue control, and
when disabled it acts as it did before the patch was applied. This
patch has not been tested with e Wii Classic Controller (either the
original or the pro version) as I do not have one of these
controllers.
Although I have not tested it with these controllers, I think it is
likely this patch will also work with the NES Classic Edition
Controllers.
Signed-off-by: Daniel G. Morse <dmorse@speedfox.co.uk>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Using uhid and KASAN this driver crashed because it was getting
several connection events where it only expected one. Then the
device was added several times to the static device list and it got
corrupted.
This patch checks if the device is already in the list before adding
it.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Neither the trackpad, nor the mouse want input core to generate autorepeat
events for their buttons, so let's reset the bit (as hid-input sets it for
these devices based on the usage vendor code).
Cc: stable@vger.kernel.org
Reported-by: Yariv <oigevald+kernel@gmail.com>
Tested-by: Yariv <oigevald+kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for devices which that have reports with id == 2
Signed-off-by: Caiyuan Xie <caiyuan.xie@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few
minutes of inactivity when using it wired and typing does not result
in any input events any more. This is a common firmware flaw. So add
the ALWAYS_POLL quirk for this device.
GitHub user Dietrich Moerman (dietrichm) tested the quirk and
requested my help in my project
https://github.com/sriemer/fix-linux-mouse issue 22 to provide
this patch.
Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke