This file has a lot of dead comments and needs to be cleaned up.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent faults processing messages for devices that no driver has yet
registered to handle.
Previously, code of the form:
drv = to_visor_driver(dev->device.driver);
if (!drv)
goto away;
was not having the desired intent, because to_visor_driver() was
essentially returning garbage if its argument was NULL. The only existing
case of this is in initiate_chipset_device_pause_resume(), which is called
during IOVM service partition recovery. We were thus faulting when IOVM
service partition recovery was initiated on a bus that had at least one
device for which no function driver had registered
(visorbus_register_visor_driver).
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During testing with visornic the offset of num_rcv_bufs
was being reported at 188 instead of 186. The vnic structure
starts at 180 and the macaddr is only 6 bytes long.
When I defined and packed the structures outside of the struct
and then referenced them in the struct the correct offset
was generated.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The iochannel.h file no longer needs to include
conttrolvmchannel.h, vbuschannel.h and vmcallinterfaces.h.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was noticed that iochannel.h was still using pragmas to
pack the datastructures, should be using __packed instead.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves phys_info to iochannel.h. It is only
used by iochannel.h and is not needed in
vmcallinterfaces.h.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of unused values in the enum.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diagchannel.h is used primarily for the diagnostics channel. The
diagnostics channel is not being used by linux guests currently, so
the majority of the file is not needed. What is left is what is
needed to perform postcode vmcalls. Those postcodes will eventually
end up in the diag channel.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Give the enum the correct values instead of based on other values.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
min_size/max_size aren't used anywhere, and they were just causing
headaches in the drivers being ported over to the new interfaces.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the legacy dev_info struct and instead creates
and passes around a traditional struct device.
This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.
Half of the churn is just the conversion of visorchipset_device_info
to visor_device. Various cleanups include re-arranging the failure
paths to make more sense.
Pay attention to the create_visor_device function. This had a lot of
churn to simplify everything.
Lots of functions disappeared because they are not needed any more.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the legacy bus_info struct and instead creates
and passes around a traditional struct device.
This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.
Half of the churn is just the conversion of visorchipset_bus_info
to visor_device. Various cleanups include re-arranging the failure
paths to make more sense.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I used 0 as the device id for the bus root, neglecting the fact that
device 0 is a valid id in Unisys's configuration. Modify this to
use UINT_MAX instead as a unique number.
As fallout from this change it was noticed the bus_no and dev_no was not
defined the same way consistently. Fix visorbus.h to use u32 there. Fix
the resulting printk warning too.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most device functions pass bus_no and dev_no around and then do a lookup
inside each function to find the dev_info struct. Instead just pass the
pointer.
This prepares us for a later conversion to using visor device.
No real technical changes. Just function header changes and little
cleanups as a result.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is an attempt to help hide the channel info behind
accessory functions. I was trying to keep visorchannel as private
as possible.
The only function missing that seemed to be needed for now was
the ability to set the clientpartition. So I expose that here.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The visorbus driver has three _info structs lying around
(device, bus, channel) that store subsets of info from the
bigger structs.
Having these structs around make resource handling very difficult
and more complicated than it needs to be. Use the device
infrastructure and instead pass 'struct visor_device' all
over the place.
In order to do that 'struct visor_device' needs to get smarter.
This patch adds the pieces to prep for it. The new elements
will be used in later patches.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly hook into the struct device groups element. This allows the
core infrastructure to manage the files instead of the bus layer. And
makes the code easier to read.
I didn't clean up the _show functions just modified them a bit to handle
the different args for now and to prevent a build warning.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove uisqueue.h, uisthread.h, and uisutils.h
replace HOSTADDRESS with u64
remove "uisutils.h" from header list in visorchipset.c
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move last three files out of common-spar
iochannel.h --> include (will be used by visorhba and visornic)
version.h --> moved to include
controlvmcompletionstatus.h --> moved to visorbus, part of
controlvmchannel.h
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diagchannel needs to go to standard include.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Channel.h is used by all channels, it needs to be in include.
Controlvm Channel is only used by visorbus, it needs to just be there.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This preps for the possible build breakage in the next few
patches.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
[updated changelog to reflect new patch order; instead
of 'fixes' the patch 'prevents' - dcz]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of common-spar/include/diagnostics/appos_subsystems.h.
No one is using it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows the caller to specify an appropriate GFP flag instead of
hardcoding the lowest common denominator.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch move the needed linux include files from timskmod.h
to the files that calls those include. Also procobjecttree.h is
removed since it is dead code.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all timksmod.h pound defines. It also removes
visorkmodutils.c since it no longer has any use by itself. Since
visorkmodutils.c is no longer needed the module_init for
visorchipset.c is modified to call visorutil_spar_detect directly
instead of the extern variable in timksmod.h.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These shouldn't be defined in the code and can be replaced with the
standard bool, true, and false usage that the kernel uses.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn visorbus.h into a public header that all visor* drivers will
include.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs update from Al Viro:
"Part one:
- struct filename-related cleanups
- saner iov_iter_init() replacements (and switching the syscalls to
use of those)
- ntfs switch to ->write_iter() (Anton)
- aio cleanups and splitting iocb into common and async parts
(Christoph)
- assorted fixes (me, bfields, Andrew Elble)
There's a lot more, including the completion of switchover to
->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
race fixes, etc, but that goes after #for-davem merge. David has
pulled it, and once it's in I'll send the next vfs pull request"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
sg_start_req(): use import_iovec()
sg_start_req(): make sure that there's not too many elements in iovec
blk_rq_map_user(): use import_single_range()
sg_io(): use import_iovec()
process_vm_access: switch to {compat_,}import_iovec()
switch keyctl_instantiate_key_common() to iov_iter
switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
vmsplice_to_user(): switch to import_iovec()
kill aio_setup_single_vector()
aio: simplify arguments of aio_setup_..._rw()
aio: lift iov_iter_init() into aio_setup_..._rw()
lift iov_iter into {compat_,}do_readv_writev()
NFS: fix BUG() crash in notify_change() with patch to chown_common()
dcache: return -ESTALE not -EBUSY on distributed fs race
NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
VFS: Add iov_iter_fault_in_multipages_readable()
drop bogus check in file_open_root()
switch security_inode_getattr() to struct path *
constify tomoyo_realpath_from_path()
...
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the last set of macros from uniklog.h. Without LOGWRN() and
friends, uniklog.h is empty so we can delete the file itself as well.
This macro was not used a lot but the file was included in many places.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the LOGERR, LOGERRDEV, LOGERRDEVX, LOGERRNAME, LOGORDUMPERR
macros from all the drivers.
In one case the removal of the ERRDRV() changed things such that a macro which
returned a value was needed, but the return value was no longer being used. In
this case the macro was replaced with the contents of the macro, but with the
truth calculation removed so that it would not generate a warning.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the LOGVER macro from the drivers entirely.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the ASSERT macro from timskmod.h, and replace its single use with
WARN_ON() instead.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the LOGINF, LOGINFDEV, LOGINFDEVX, LOGINFNAME, PRINTKDRV, and
INFODRV macros entirely from the driver set.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The messages put out by these macros are for driver debugging and aren't needed
any more, so just remove all use of them, and the macros too.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove the should_stop variable and KILL API as they are
no longer required
Cc: Ken Cox <jkc@redhat.com>
Cc: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
these functions are not being used anywhere.so we can remove them.
has been verified by "git grep" that they are not being referenced
anywhere also has been build tested.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments,
keeping track of who changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
these header files were included multiple times
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some space between the macros in uisutils.h for readability.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch refactors the message union and internal structures so they
will pass checkpatch.pl. The typedef is removed, and references are
changed to struct controlvm_message_packet. The comments were reflowed
and cleaned up to remove unnecessary information, and CamelCase member
names were fixed here and in references:
busNo => bus_no
devNo => dev_no
deviceCount => dev_count
channelAddr => channel_addr
channelBytes => channel_bytes
busDataTypeGuid => bus_data_type_uuid
busInstGuid => bus_inst_uuid
destroyBus => destroy_bus
guestHandle => guest_handle
recvBusInterruptHandle => recv_bus_irq_handle
configureBus => configure_bus
createDevuce => create_device
destroyDevice => destroy_device
configureDevice => configure_device
reconfigureDevice => reconfigure_device
busChangeState => bus_change_state
physicalDevice => phys_device
busCount => bus_count
switchCount => switch_count
platformNumber => platformNumber
initChipset => init_chipset
Options => options
Test => test
chipsetSelftest => chipset_selftest
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
