Commit Graph

1162 Commits

Author SHA1 Message Date
Heiko Carstens 2cfd7b73f5 s390/kvm: use union tod_clock
Use union tod_clock and get rid of the kvm specific struct
kvm_s390_tod_clock_ext which apparently was introduced for the same
purpose.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-13 17:17:54 +01:00
Sven Schnelle 56e62a7370 s390: convert to generic entry
This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
  know about our PIF flags in exit_to_user_mode_loop().

- The old code had several ways to restart syscalls:

  a) PIF_SYSCALL_RESTART, which was only set during execve to force a
     restart after upgrading a process (usually qemu-kvm) to pgste page
     table extensions.

  b) PIF_SYSCALL, which is set by do_signal() to indicate that the
     current syscall should be restarted. This is changed so that
     do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
     PIF_SYSCALL doesn't work with the generic code, and changing it
     to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
     more unique.

- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.

The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.

CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-19 12:29:26 +01:00
Linus Torvalds 6a447b0e31 ARM:
* PSCI relay at EL2 when "protected KVM" is enabled
 * New exception injection code
 * Simplification of AArch32 system register handling
 * Fix PMU accesses when no PMU is enabled
 * Expose CSV3 on non-Meltdown hosts
 * Cache hierarchy discovery fixes
 * PV steal-time cleanups
 * Allow function pointers at EL2
 * Various host EL2 entry cleanups
 * Simplification of the EL2 vector allocation
 
 s390:
 * memcg accouting for s390 specific parts of kvm and gmap
 * selftest for diag318
 * new kvm_stat for when async_pf falls back to sync
 
 x86:
 * Tracepoints for the new pagetable code from 5.10
 * Catch VFIO and KVM irqfd events before userspace
 * Reporting dirty pages to userspace with a ring buffer
 * SEV-ES host support
 * Nested VMX support for wait-for-SIPI activity state
 * New feature flag (AVX512 FP16)
 * New system ioctl to report Hyper-V-compatible paravirtualization features
 
 Generic:
 * Selftest improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb
 lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk
 BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt
 XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G
 bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2
 drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A==
 =ISud
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Much x86 work was pushed out to 5.12, but ARM more than made up for it.

  ARM:
   - PSCI relay at EL2 when "protected KVM" is enabled
   - New exception injection code
   - Simplification of AArch32 system register handling
   - Fix PMU accesses when no PMU is enabled
   - Expose CSV3 on non-Meltdown hosts
   - Cache hierarchy discovery fixes
   - PV steal-time cleanups
   - Allow function pointers at EL2
   - Various host EL2 entry cleanups
   - Simplification of the EL2 vector allocation

  s390:
   - memcg accouting for s390 specific parts of kvm and gmap
   - selftest for diag318
   - new kvm_stat for when async_pf falls back to sync

  x86:
   - Tracepoints for the new pagetable code from 5.10
   - Catch VFIO and KVM irqfd events before userspace
   - Reporting dirty pages to userspace with a ring buffer
   - SEV-ES host support
   - Nested VMX support for wait-for-SIPI activity state
   - New feature flag (AVX512 FP16)
   - New system ioctl to report Hyper-V-compatible paravirtualization features

  Generic:
   - Selftest improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
  KVM: SVM: fix 32-bit compilation
  KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
  KVM: SVM: Provide support to launch and run an SEV-ES guest
  KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
  KVM: SVM: Provide support for SEV-ES vCPU loading
  KVM: SVM: Provide support for SEV-ES vCPU creation/loading
  KVM: SVM: Update ASID allocation to support SEV-ES guests
  KVM: SVM: Set the encryption mask for the SVM host save area
  KVM: SVM: Add NMI support for an SEV-ES guest
  KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
  KVM: SVM: Do not report support for SMM for an SEV-ES guest
  KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
  KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
  KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
  KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
  KVM: SVM: Add support for EFER write traps for an SEV-ES guest
  KVM: SVM: Support string IO operations for an SEV-ES guest
  KVM: SVM: Support MMIO for an SEV-ES guest
  KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
  KVM: SVM: Create trace events for VMGEXIT processing
  ...
2020-12-20 10:44:05 -08:00
Christian Borntraeger 50a05be484 KVM: s390: track synchronous pfault events in kvm_stat
Right now we do count pfault (pseudo page faults aka async page faults
start and completion events). What we do not count is, if an async page
fault would have been possible by the host, but it was disabled by the
guest (e.g. interrupts off, pfault disabled, secure execution....).  Let
us count those as well in the pfault_sync counter.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20201125090658.38463-1-borntraeger@de.ibm.com
2020-12-10 14:20:26 +01:00
Christian Borntraeger c419621873 KVM: s390: Add memcg accounting to KVM allocations
Almost all kvm allocations in the s390x KVM code can be attributed to
the process that triggers the allocation (in other words, no global
allocation for other guests). This will help the memcg controller to
make the right decisions.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
2020-12-10 13:36:05 +01:00
Collin Walling 6cbf1e960f KVM: s390: remove diag318 reset code
The diag318 data must be set to 0 by VM-wide reset events
triggered by diag308. As such, KVM should not handle
resetting this data via the VCPU ioctls.

Fixes: 23a60f8344 ("s390/kvm: diagnose 0x318 sync and reset")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20201104181032.109800-1-walling@linux.ibm.com
2020-11-11 09:31:52 +01:00
Janosch Frank 1ed576a20c KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
We can only have protected guest pages after a successful set secure
parameters call as only then the UV allows imports and unpacks.

By moving the test we can now also check for it in s390_reset_acc()
and do an early return if it is 0.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-11-11 09:31:48 +01:00
Peter Xu 64019a2e46 mm/gup: remove task_struct pointer for all gup code
After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more.  Remove that parameter in the whole gup
stack.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:04 -07:00
Mike Rapoport ca15ca406f mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"

Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table.  These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.

In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>

In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.

This patch (of 8):

In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory.  Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.

As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.

The process was somewhat automated using

	sed -i -E '/[<"]asm\/pgalloc\.h/d' \
                $(grep -L -w -f /tmp/xx \
                        $(git grep -E -l '[<"]asm/pgalloc\.h'))

where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.

[rppt@linux.ibm.com: fix powerpc warning]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:26 -07:00
Paolo Bonzini f3633c2683 KVM: s390: Enhancement for 5.9
- implement diagnose 318
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJfIpNzAAoJEBF7vIC1phx8l0cP/AvZ6oT5dlAGeBhtPeM/3rqp
 g7RCukN445LQfxWeWXuzckAYE4AAAtFqMS6PujfKBc+Lf7t+d6Iuod7wFlJTDImP
 wIGcCV1pTSpIHaFiSM1rpqRjnzFGeWrqWg6gBSjm0aSMqB8KAjv+PdyQ1rcfyiIj
 r+sD+Vt9DNGop12TY2YxUlXaxzPccGMAniDXesFgKb9IoTdMLdEt45Evkx9D6UAx
 eetWMwZTwqB8iWJx6xU41LxDA4ERlS+8TsE+SC0r8n6yCmhQ98hgb4i2O1gx9JIl
 K5TqpXMWVBKFyeSbJBw9bXtWa5F/gXDuD6zrzRiMjZR4Og6TXqL2NoXgr9LHN/g7
 WpBlF/eDr7TNxF1VutvSiLvV5XI/t8yjbwSvAt2+QtIIrJK+fPAdTRSH1Q8TRUMj
 cIRdCw2H10neseAPhbdn9nSJhuQ5E/hGrMzubiYQeTXsA3TLfLWniuejfRufMOXB
 kgepl+8H60D8o1l459+81NBV6rM5RdRRzWkWIIYD2/+yWRtclb1K2CF2HrN51saC
 3SQI90Rr7Vx4yjS0p84/aasAAy7WxfumnoLwBsRwIE0X9R4e4plC12igwsmPK8oM
 V/SO4w+LAJnW1bQpXuqRGMPI29gpGDHVEcfOtuerHE1pZya6VRIWTEkSsdXt1eZI
 trxY3c6Xruor8DQSDsjv
 =hr9t
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next-5.6

KVM: s390: Enhancement for 5.9
- implement diagnose 318
2020-08-03 14:19:13 -04:00
Tianjia Zhang 2f0a83bece KVM: s390: clean up redundant 'kvm_run' parameters
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200623131418.31473-2-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10 04:26:39 -04:00
Vitaly Kuznetsov e8c22266e6 KVM: async_pf: change kvm_setup_async_pf()/kvm_arch_setup_async_pf() return type to bool
Unlike normal 'int' functions returning '0' on success, kvm_setup_async_pf()/
kvm_arch_setup_async_pf() return '1' when a job to handle page fault
asynchronously was scheduled and '0' otherwise. To avoid the confusion
change return type to 'bool'.

No functional change intended.

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200615121334.91300-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08 16:21:36 -04:00
Collin Walling 23a60f8344 s390/kvm: diagnose 0x318 sync and reset
DIAGNOSE 0x318 (diag318) sets information regarding the environment
the VM is running in (Linux, z/VM, etc) and is observed via
firmware/service events.

This is a privileged s390x instruction that must be intercepted by
SIE. Userspace handles the instruction as well as migration. Data
is communicated via VCPU register synchronization.

The Control Program Name Code (CPNC) is stored in the SIE block. The
CPNC along with the Control Program Version Code (CPVC) are stored
in the kvm_vcpu_arch struct.

This data is reset on load normal and clear resets.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200622154636.5499-3-walling@linux.ibm.com
[borntraeger@de.ibm.com: fix sync_reg position]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-06-23 10:55:33 +02:00
Linus Torvalds 6adc19fd13 Kbuild updates for v5.8 (2nd)
- fix build rules in binderfs sample
 
  - fix build errors when Kbuild recurses to the top Makefile
 
  - covert '---help---' in Kconfig to 'help'
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7lBuYVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGHvIP/3iErjPshpg/phwH8NTCS4SFkiti
 BZRM+2lupSn7Qs53BTpVzIkXoHBJQZlJxlQ5HY8ScO+fiz28rKZr+b40us+je1Q+
 SkvSPfwZzxjEg7lAZutznG4KgItJLWJKmDyh9T8Y8TAuG4f8WO0hKnXoAp3YorS2
 zppEIxso8O5spZPjp+fF/fPbxPjIsabGK7Jp2LpSVFR5pVDHI/ycTlKQS+MFpMEx
 6JIpdFRw7TkvKew1dr5uAWT5btWHatEqjSR3JeyVHv3EICTGQwHmcHK67cJzGInK
 T51+DT7/CpKtmRgGMiTEu/INfMzzoQAKl6Fcu+vMaShTN97Hk9DpdtQyvA6P/h3L
 8GA4UBct05J7fjjIB7iUD+GYQ0EZbaFujzRXLYk+dQqEJRbhcCwvdzggGp0WvGRs
 1f8/AIpgnQv8JSL/bOMgGMS5uL2dSLsgbzTdr6RzWf1jlYdI1i4u7AZ/nBrwWP+Z
 iOBkKsVceEoJrTbaynl3eoYqFLtWyDau+//oBc2gUvmhn8ioM5dfqBRiJjxJnPG9
 /giRj6xRIqMMEw8Gg8PCG7WebfWxWyaIQwlWBbPok7DwISURK5mvOyakZL+Q25/y
 6MBr2H8NEJsf35q0GTINpfZnot7NX4JXrrndJH8NIRC7HEhwd29S041xlQJdP0rs
 E76xsOr3hrAmBu4P
 =1NIT
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues
2020-06-13 13:29:16 -07:00
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Linus Torvalds 52cd0d972f MIPS:
- Loongson port
 
 PPC:
 - Fixes
 
 ARM:
 - Fixes
 
 x86:
 - KVM_SET_USER_MEMORY_REGION optimizations
 - Fixes
 - Selftest fixes
 
 The guest side of the asynchronous page fault work has been delayed to 5.9
 in order to sync with Thomas's interrupt entry rework.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
 UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
 QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
 +uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
 uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
 wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
 =+Hh0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
 "The guest side of the asynchronous page fault work has been delayed to
  5.9 in order to sync with Thomas's interrupt entry rework, but here's
  the rest of the KVM updates for this merge window.

  MIPS:
   - Loongson port

  PPC:
   - Fixes

  ARM:
   - Fixes

  x86:
   - KVM_SET_USER_MEMORY_REGION optimizations
   - Fixes
   - Selftest fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
  KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
  KVM: selftests: fix sync_with_host() in smm_test
  KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
  KVM: async_pf: Cleanup kvm_setup_async_pf()
  kvm: i8254: remove redundant assignment to pointer s
  KVM: x86: respect singlestep when emulating instruction
  KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
  KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
  KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
  KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
  KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
  KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
  KVM: arm64: Remove host_cpu_context member from vcpu structure
  KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
  KVM: arm64: Handle PtrAuth traps early
  KVM: x86: Unexport x86_fpu_cache and make it static
  KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
  KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
  KVM: arm64: Stop save/restoring ACTLR_EL1
  KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
  ...
2020-06-12 11:05:52 -07:00
Vitaly Kuznetsov 2a18b7e7cd KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.

Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.

s390 seems to always be able to inject 'page not present', the
change is effectively a nop.

Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-2-vkuznets@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208081
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-11 12:35:19 -04:00
Michel Lespinasse c1e8d7c6a7 mmap locking API: convert mmap_sem comments
Convert comments that reference mmap_sem to reference mmap_lock instead.

[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Michel Lespinasse d8ed45c5dc mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport 65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Linus Torvalds 23fc02e36e s390 updates for the 5.8 merge window
- Add support for multi-function devices in pci code.
 
 - Enable PF-VF linking for architectures using the
   pdev->no_vf_scan flag (currently just s390).
 
 - Add reipl from NVMe support.
 
 - Get rid of critical section cleanup in entry.S.
 
 - Refactor PNSO CHSC (perform network subchannel operation) in cio
   and qeth.
 
 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.
 
 - Align ioremap() with generic code.
 
 - Accept requests without the prefetch bit set in vfio-ccw.
 
 - Enable path handling via two new regions in vfio-ccw.
 
 - Other small fixes and improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
 FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
 EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
 3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
 r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
 utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
 RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
 =VhXR
 -----END PGP SIGNATURE-----

Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for multi-function devices in pci code.

 - Enable PF-VF linking for architectures using the pdev->no_vf_scan
   flag (currently just s390).

 - Add reipl from NVMe support.

 - Get rid of critical section cleanup in entry.S.

 - Refactor PNSO CHSC (perform network subchannel operation) in cio and
   qeth.

 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.

 - Align ioremap() with generic code.

 - Accept requests without the prefetch bit set in vfio-ccw.

 - Enable path handling via two new regions in vfio-ccw.

 - Other small fixes and improvements all over the code.

* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
  vfio-ccw: make vfio_ccw_regops variables declarations static
  vfio-ccw: Add trace for CRW event
  vfio-ccw: Wire up the CRW irq and CRW region
  vfio-ccw: Introduce a new CRW region
  vfio-ccw: Refactor IRQ handlers
  vfio-ccw: Introduce a new schib region
  vfio-ccw: Refactor the unregister of the async regions
  vfio-ccw: Register a chp_event callback for vfio-ccw
  vfio-ccw: Introduce new helper functions to free/destroy regions
  vfio-ccw: document possible errors
  vfio-ccw: Enable transparent CCW IPL from DASD
  s390/pci: Log new handle in clp_disable_fh()
  s390/cio, s390/qeth: cleanup PNSO CHSC
  s390/qdio: remove q->first_to_kick
  s390/qdio: fix up qdio_start_irq() kerneldoc
  s390: remove critical section cleanup from entry.S
  s390: add machine check SIGP
  s390/pci: ioremap() align with generic code
  s390/ap: introduce new ap function ap_get_qdev()
  Documentation/s390: Update / remove developerWorks web links
  ...
2020-06-08 12:05:31 -07:00
Vitaly Kuznetsov 7c0ade6c90 KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
An innocent reader of the following x86 KVM code:

bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
{
        if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED))
                return true;
...

may get very confused: if APF mechanism is not enabled, why do we report
that we 'can inject async page present'? In reality, upon injection
kvm_arch_async_page_present() will check the same condition again and,
in case APF is disabled, will just drop the item. This is fine as the
guest which deliberately disabled APF doesn't expect to get any APF
notifications.

Rename kvm_arch_can_inject_async_page_present() to
kvm_arch_can_dequeue_async_page_present() to make it clear what we are
checking: if the item can be dequeued (meaning either injected or just
dropped).

On s390 kvm_arch_can_inject_async_page_present() always returns 'true' so
the rename doesn't matter much.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-01 04:26:07 -04:00
Sven Schnelle 0b0ed657fe s390: remove critical section cleanup from entry.S
The current code is rather complex and caused a lot of subtle
and hard to debug bugs in the past. Simplify the code by calling
the system_call handler with interrupts disabled, save
machine state, and re-enable them later.

This requires significant changes to the machine check handling code
as well. When the machine check interrupt arrived while being in kernel
mode the new code will signal pending machine checks with a SIGP external
call. When userspace was interrupted, the handler will switch to the
kernel stack and directly execute s390_handle_mcck().

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-28 12:21:54 +02:00
Paolo Bonzini 4c7ccc3bf7 KVM: s390: Cleanups for 5.8
- vsie (nesting) cleanups
 - remove unneeded semicolon
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJezNAKAAoJEBF7vIC1phx8AyYP/0ul2Ei/IWCgZbVPCUYbBFlk
 3EP/jIOgwt1Vteb5/gDGaoeaPKDdvtK49Kus5sXsjv57y6laNByh6V1bvVsirdwq
 e61Yg/UJSBtFpNOlyIK1WnwAnuMnSwLjUwpFUl4qXy4ynGNu42MIXNf116q5/Uqg
 K0stiMzS8WLKshYDM/m/dTR1NXINCIujouW2ks9PeiY73E2quSm1DhNV0a36WfSf
 iYjCI5Uz2du5X/kNnjidbhv4jmLFlpJEx0mwxY1EizM+4mxXKAA26hS2Q8TcXJVk
 ugVFL/CNrq/stAY2N0axHwsiDuH8UXn6RjjCDq1n52HHyDcRkdsvpA/5MK73srm9
 z6lvSMVTc18ARZmg8FqOOu9INPTeEQ3b6sjabgrq3cHpiYG20fQKseQbrYF7/Cz/
 nMNkcE/BykQFOyYzAh/FDOpW9f9/0a67vhZs6BL0aJbIpbuBFSR7c8fXhkFcKr50
 hwFaFnZOf6mponB6V31RPORqJjZRXn91wIHWILW4fXpMetHAv07naNxmY1T4Rb4U
 mkZwPzIc7lk2LIwEIJFL+w9h50VFnL1BWP2ncrYKSBpcl1M7qIKt4RPWMZqdBJhu
 dijvwhoU5G6+zHZFTo5L21BYkSC3PRbD8bmm1VspThKNlqlsxYiK/9wLqLAUIlgO
 YxNERaQuTcHqbfj8QV1w
 =+nMA
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Cleanups for 5.8

- vsie (nesting) cleanups
- remove unneeded semicolon
2020-05-27 13:10:21 -04:00
Paolo Bonzini 9d5272f5e3 Merge tag 'noinstr-x86-kvm-2020-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD 2020-05-20 03:40:09 -04:00
David Matlack cb953129bf kvm: add halt-polling cpu usage stats
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns

Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).

To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.

Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.

Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>

Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15 12:26:26 -04:00
Paolo Bonzini 4aef2ec902 Merge branch 'kvm-amd-fixes' into HEAD 2020-05-13 12:14:05 -04:00
Peter Xu b9b2782cd5 KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported.  My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.

The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-07 06:13:40 -04:00
Paolo Bonzini 2673cb6849 KVM: s390: Fix for running nested uner z/VM
There are circumstances when running nested under z/VM that would trigger a
 WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this
 code more robust and flexible, but just returning instead of WARNING makes
 guest bootable again.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJesqW/AAoJEBF7vIC1phx8AvwQAK4QRoi6rnYkVQTZD639h2KJ
 8bDfuzzFROI52tJ//+zZgf0XRhuqMWJuSTmeTYsQv24Wtwbkbt3oYMpdSyyxd9FU
 1cjnGdg5x9/TFwYrMJNZDsOO2CUF1mz8I2j6VC9oIP/BAzc96vYQ+zQQR/Kfz9dm
 ESOAQYGcjDSwJT0vMD+u8YSKlDJCNM/8DtbwqnFHJSPjmemI1oVNUmtVoy3f9z/t
 XH3UFear4c9y3RY3+mvGQtrPP7ufzt9pKC4AFO1XlFr+mDpW2jfaujwrDcM4c/HH
 d6VzavZ6LPxTZ4IF8PPpBTXhfhENfU1c7W7N7pVoNgBbEqPd6KqQZJYZuTz57I30
 FeKmdhgyuv/YvOqUUjNo92QEfqhfm2jRAjIUDQTXIB+4g/BrwiebmFKcYgDh6GKi
 lJztlEiJgmdcI56aacL1r8XY8qEisMcrhUWwfGo6TvR+5fiU1Mtm2ZI57CklFYxP
 QHlo/tZ3f3iI9IgTnh9cVHxPYC8hAhfvAH/Jbfl0EfjGj7HVu/NNH8EOJzyBb4Zo
 Vohr+GqinDl5SoiZ3sQd/cOeGWeJsMi/IKdPbNvGVIZNkZz1RrHe8uoVO+RZ0WOA
 a634CW3i/y3WblzAZ7W/oOOn51si3n2zzhVjVF1QbTXzswrGr0o7/dbl+veB2/Ro
 SLg2bpdejCYCxtaC4CTr
 =cSBf
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix for running nested uner z/VM

There are circumstances when running nested under z/VM that would trigger a
WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this
code more robust and flexible, but just returning instead of WARNING makes
guest bootable again.
2020-05-06 08:09:17 -04:00
Peter Xu 495907ec36 KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported.  My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.

The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-06 06:51:38 -04:00
Christian Borntraeger 5615e74f48 KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
In LPAR we will only get an intercept for FC==3 for the PQAP
instruction. Running nested under z/VM can result in other intercepts as
well as ECA_APIE is an effective bit: If one hypervisor layer has
turned this bit off, the end result will be that we will get intercepts for
all function codes. Usually the first one will be a query like PQAP(QCI).
So the WARN_ON_ONCE is not right. Let us simply remove it.

Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.3+
Fixes: e5282de931 ("s390: ap: kvm: add PQAP interception for AQIC")
Link: https://lore.kernel.org/kvm/20200505083515.2720-1-borntraeger@de.ibm.com
Reported-by: Qian Cai <cailca@icloud.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-05-05 11:15:05 +02:00
Paolo Bonzini 3bda03865f KVM: s390: Fix for 5.7 and maintainer update
- Silence false positive lockdep warning
 - add Claudio as reviewer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJenY6AAAoJEBF7vIC1phx8bykQAK+QZyD+H/zGNuqeUVn0sh8e
 yKUVMR+kuE+l57q77nt2AYVxqpCD9xSKRR+SOSLzhVH/HJf625nm+Ny/WOWMebwJ
 EA/KK+v15T5rga8gFza+4cPg4v/pHwjHhSbjTb1JWg+8cJR1BTj6OxRuTtWr5+25
 GF4RhkJOit/VhNbCo1aIgs7/7F1pPALstdPAUsHYe1PeULdRMVqSVluXT2KTPhpi
 /kzDw8sKKcYgv/eaVdcNoHv+VX1AWIRDAKEttCywyocfbu0ESwadmR7C0qlm1446
 HqowP6F0xCF0Whi/65aN4ZOv7wjO/qrV08DZ7JLA3/oKlXtZ1ieyiE2q/P1frSo1
 gvmuHiH5/UI6t6a/BSCpJwqcilxKYArqAAYBKoGiJhTbsJStqw0wl41klWTKXlTq
 VrCvjoUxQ9JMjFCQ1GXOU+ODNyX2IwZYptJ5vF24HYzBJwUBe3HPG9/BA8YcodzG
 qGQ5IKv0Q1IFTwOqnt557H0MjcBtNIEx54aLJrPy3wldsiNSj39Ft0cuvnbR+Q4F
 QhKk88dHtd7NW1IirfgYmLGe0rB1ANKM7wUGEdM5w2y5Eg8wCs8/P4KeGh0YyFI9
 xPqZDfwof6KkDjOGFXr/CeD/thi+km0/FpePb7cL5Ow4a+JmrCvqQiXrf0TbnFpv
 t5ZlHnGzoSHsEaRgmJ+X
 =d46L
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fix for 5.7 and maintainer update

- Silence false positive lockdep warning
- add Claudio as reviewer
2020-04-21 09:37:13 -04:00
Tianjia Zhang 1b94f6f810 KVM: Remove redundant argument to kvm_arch_vcpu_ioctl_run
In earlier versions of kvm, 'kvm_run' was an independent structure
and was not included in the vcpu structure. At present, 'kvm_run'
is already included in the vcpu structure, so the parameter
'kvm_run' is redundant.

This patch simplifies the function definition, removes the extra
'kvm_run' parameter, and extracts it from the 'kvm_vcpu' structure
if necessary.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Message-Id: <20200416051057.26526-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-21 09:13:11 -04:00
Emanuele Giuseppe Esposito 812756a82e kvm_host: unify VM_STAT and VCPU_STAT definitions in a single place
The macros VM_STAT and VCPU_STAT are redundantly implemented in multiple
files, each used by a different architecure to initialize the debugfs
entries for statistics. Since they all have the same purpose, they can be
unified in a single common definition in include/linux/kvm_host.h

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20200414155625.20559-1-eesposit@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-21 09:13:01 -04:00
Jason Yan 0b545fd17f KVM: s390: remove unneeded semicolon in gisa_vcpu_kicker()
Fix the following coccicheck warning:

arch/s390/kvm/interrupt.c:3085:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200418081926.41666-1-yanaijie@huawei.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-20 11:33:32 +02:00
David Hildenbrand d075fc3154 KVM: s390: vsie: Move conditional reschedule
Let's move it to the outer loop, in case we ever run again into long
loops, trying to map the prefix. While at it, convert it to cond_resched().

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-5-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-20 11:33:31 +02:00
Eric Farman d47c4c454a KVM: s390: Fix PV check in deliverable_irqs()
The diag 0x44 handler, which handles a directed yield, goes into a
a codepath that does a kvm_for_each_vcpu() and ultimately
deliverable_irqs().  The new check for kvm_s390_pv_cpu_is_protected()
contains an assertion that the vcpu->mutex is held, which isn't going
to be the case in this scenario.

The result is a plethora of these messages if the lock debugging
is enabled, and thus an implication that we have a problem.

  WARNING: CPU: 9 PID: 16167 at arch/s390/kvm/kvm-s390.h:239 deliverable_irqs+0x1c6/0x1d0 [kvm]
  ...snip...
  Call Trace:
   [<000003ff80429bf2>] deliverable_irqs+0x1ca/0x1d0 [kvm]
  ([<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm])
   [<000003ff8042ba82>] kvm_s390_vcpu_has_irq+0x2a/0xa8 [kvm]
   [<000003ff804101e2>] kvm_arch_dy_runnable+0x22/0x38 [kvm]
   [<000003ff80410284>] kvm_vcpu_on_spin+0x8c/0x1d0 [kvm]
   [<000003ff80436888>] kvm_s390_handle_diag+0x3b0/0x768 [kvm]
   [<000003ff80425af4>] kvm_handle_sie_intercept+0x1cc/0xcd0 [kvm]
   [<000003ff80422bb0>] __vcpu_run+0x7b8/0xfd0 [kvm]
   [<000003ff80423de6>] kvm_arch_vcpu_ioctl_run+0xee/0x3e0 [kvm]
   [<000003ff8040ccd8>] kvm_vcpu_ioctl+0x2c8/0x8d0 [kvm]
   [<00000001504ced06>] ksys_ioctl+0xae/0xe8
   [<00000001504cedaa>] __s390x_sys_ioctl+0x2a/0x38
   [<0000000150cb9034>] system_call+0xd8/0x2d8
  2 locks held by CPU 2/KVM/16167:
   #0: 00000001951980c0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x90/0x8d0 [kvm]
   #1: 000000019599c0f0 (&kvm->srcu){....}, at: __vcpu_run+0x4bc/0xfd0 [kvm]
  Last Breaking-Event-Address:
   [<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm]
  irq event stamp: 11967
  hardirqs last  enabled at (11975): [<00000001502992f2>] console_unlock+0x4ca/0x650
  hardirqs last disabled at (11982): [<0000000150298ee8>] console_unlock+0xc0/0x650
  softirqs last  enabled at (7940): [<0000000150cba6ca>] __do_softirq+0x422/0x4d8
  softirqs last disabled at (7929): [<00000001501cd688>] do_softirq_own_stack+0x70/0x80

Considering what's being done here, let's fix this by removing the
mutex assertion rather than acquiring the mutex for every other vcpu.

Fixes: 201ae986ea ("KVM: s390: protvirt: Implement interrupt injection")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200415190353.63625-1-farman@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-20 11:23:45 +02:00
Sean Christopherson 97daa028f3 KVM: s390: Return last valid slot if approx index is out-of-bounds
Return the index of the last valid slot from gfn_to_memslot_approx() if
its binary search loop yielded an out-of-bounds index.  The index can
be out-of-bounds if the specified gfn is less than the base of the
lowest memslot (which is also the last valid memslot).

Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is
non-zero.

Fixes: afdad61615 ("KVM: s390: Fix storage attributes migration with memory slots")
Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots
Cc: stable@vger.kernel.org # 4.19.x
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-14 10:39:57 -04:00
Linus Torvalds 0339eb9540 s390:
* nested virtualization fixes
 
 x86:
 * split svm.c
 * miscellaneous fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6MwqgUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroN3Wgf9H8GZvQy7Wzmn7xr2J5oG+OV153fR
 w6vsxYSNhlB8ekWyxGnNo0r0+gsh2h0nnMMIS7FDOy0NoRPlO4uFKLjn/SFCUoJ6
 fdJJAmMzTTvLkJQJdscRo3hzJJgvpbYleQPDJFVZPYLhnxb2zv+CbGZwRDtrV+Kd
 YJLDzrXTfWGhB1kpXNJqBKknClndspY3Sn4l/wolGGLawrqTAZMSZGYkA2/JIF0Y
 5SuQ8m49msS3/xJpNSllJzaD/tMSj8nuweqTyVqkp6ooviwqc4sESDx/EVbZUDPA
 gMfK8FDxhgJsPTsrBxYDy6ZfhcIlRpt/qHsvU2wHvhS8RxIUo2Pkl+q3tg==
 =KebD
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "s390:
   - nested virtualization fixes

  x86:
   - split svm.c

   - miscellaneous fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: fix crash cleanup when KVM wasn't used
  KVM: X86: Filter out the broadcast dest for IPI fastpath
  KVM: s390: vsie: Fix possible race when shadowing region 3 tables
  KVM: s390: vsie: Fix delivery of addressing exceptions
  KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
  KVM: nVMX: don't clear mtf_pending when nested events are blocked
  KVM: VMX: Remove unnecessary exception trampoline in vmx_vmenter
  KVM: SVM: Split svm_vcpu_run inline assembly to separate file
  KVM: SVM: Move SEV code to separate file
  KVM: SVM: Move AVIC code to separate file
  KVM: SVM: Move Nested SVM Implementation to nested.c
  kVM SVM: Move SVM related files to own sub-directory
2020-04-08 10:56:50 -07:00
Linus Torvalds 9bb715260e virtio: fixes, vdpa
Some bug fixes.
 The new vdpa subsystem with two first drivers.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
 ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
 Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
 dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
 9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
 EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
 =/84P
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - Some bug fixes

 - The new vdpa subsystem with two first drivers

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
  vdpa: move to drivers/vdpa
  virtio: Intel IFC VF driver for VDPA
  vdpasim: vDPA device simulator
  vhost: introduce vDPA-based backend
  virtio: introduce a vDPA based transport
  vDPA: introduce vDPA bus
  vringh: IOTLB support
  vhost: factor out IOTLB
  vhost: allow per device message handler
  vhost: refine vhost and vringh kconfig
  virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
  virtio-net: Introduce hash report feature
  virtio-net: Introduce RSS receive steering feature
  virtio-net: Introduce extended RSC feature
  tools/virtio: option to build an out of tree module
2020-04-08 10:51:53 -07:00
David Hildenbrand 4d4cee96fb KVM: s390: vsie: Fix delivery of addressing exceptions
Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.

We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".

Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.

Identified by manual code inspection.

Fixes: a3508fbe9d ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-07 13:12:34 +02:00
Linus Torvalds 8c1b724ddb ARM:
* GICv4.1 support
 * 32bit host removal
 
 PPC:
 * secure (encrypted) using under the Protected Execution Framework
 ultravisor
 
 s390:
 * allow disabling GISA (hardware interrupt injection) and protected
 VMs/ultravisor support.
 
 x86:
 * New dirty bitmap flag that sets all bits in the bitmap when dirty
 page logging is enabled; this is faster because it doesn't require bulk
 modification of the page tables.
 * Initial work on making nested SVM event injection more similar to VMX,
 and less buggy.
 * Various cleanups to MMU code (though the big ones and related
 optimizations were delayed to 5.8).  Instead of using cr3 in function
 names which occasionally means eptp, KVM too has standardized on "pgd".
 * A large refactoring of CPUID features, which now use an array that
 parallels the core x86_features.
 * Some removal of pointer chasing from kvm_x86_ops, which will also be
 switched to static calls as soon as they are available.
 * New Tigerlake CPUID features.
 * More bugfixes, optimizations and cleanups.
 
 Generic:
 * selftests: cleanups, new MMU notifier stress test, steal-time test
 * CSV output for kvm_stat.
 
 KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
 by MIPS maintainers.  I had already prepared a fix, but the MIPS maintainers
 prefer to fix it in generic code rather than KVM so they are taking care of it.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
 3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
 oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
 SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
 Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
 nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
 =6fGt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - GICv4.1 support

   - 32bit host removal

  PPC:
   - secure (encrypted) using under the Protected Execution Framework
     ultravisor

  s390:
   - allow disabling GISA (hardware interrupt injection) and protected
     VMs/ultravisor support.

  x86:
   - New dirty bitmap flag that sets all bits in the bitmap when dirty
     page logging is enabled; this is faster because it doesn't require
     bulk modification of the page tables.

   - Initial work on making nested SVM event injection more similar to
     VMX, and less buggy.

   - Various cleanups to MMU code (though the big ones and related
     optimizations were delayed to 5.8). Instead of using cr3 in
     function names which occasionally means eptp, KVM too has
     standardized on "pgd".

   - A large refactoring of CPUID features, which now use an array that
     parallels the core x86_features.

   - Some removal of pointer chasing from kvm_x86_ops, which will also
     be switched to static calls as soon as they are available.

   - New Tigerlake CPUID features.

   - More bugfixes, optimizations and cleanups.

  Generic:
   - selftests: cleanups, new MMU notifier stress test, steal-time test

   - CSV output for kvm_stat"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
  x86/kvm: fix a missing-prototypes "vmread_error"
  KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
  KVM: VMX: Add a trampoline to fix VMREAD error handling
  KVM: SVM: Annotate svm_x86_ops as __initdata
  KVM: VMX: Annotate vmx_x86_ops as __initdata
  KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
  KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
  KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
  KVM: VMX: Configure runtime hooks using vmx_x86_ops
  KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
  KVM: x86: Move init-only kvm_x86_ops to separate struct
  KVM: Pass kvm_init()'s opaque param to additional arch funcs
  s390/gmap: return proper error code on ksm unsharing
  KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
  KVM: Fix out of range accesses to memslots
  KVM: X86: Micro-optimize IPI fastpath delay
  KVM: X86: Delay read msr data iff writes ICR MSR
  KVM: PPC: Book3S HV: Add a capability for enabling secure guests
  KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
  KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
  ...
2020-04-02 15:13:15 -07:00
Jason Wang 20c384f1ea vhost: refine vhost and vringh kconfig
Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol. Such dependency may prevent archs without
virtualization support from using vhost.

To solve this, a dedicated vhost menu is created under drivers so
CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION.

While at it, also squash Kconfig.vringh into vhost Kconfig file. This
avoids the trick of conditional inclusion from VOP or CAIF. Then it
will be easier to introduce new vringh users and common dependency for
both vringh and vhost.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-01 12:06:26 -04:00
Sean Christopherson b990408537 KVM: Pass kvm_init()'s opaque param to additional arch funcs
Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable.  This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.

No functional change intended.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-31 10:48:03 -04:00
Paolo Bonzini 8bf8961332 KVM: s390: cleanups for 5.7
- mark sie control block as 512 byte aligned
 - use fallthrough;
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJeegAeAAoJEBF7vIC1phx8PgMP/jcN57GRXU0yML+r8izA1JBZ
 0hnV9Mesec5sUDyDLTLuAJBS7tDvfLKi8A6QLdyTuPkUihPpWp0VD/QW4tJe1WDD
 MOPA56xH3yN7ll/q+IX7QurwY4jDCReV8DIsHjrOvDYKSBHxZSsgrR/G5ivtqzRJ
 VWl1qpB3/FgPtsdTW4x1nciaAYulWp7K75F2zWFpoRe0EZUXY8IyLJMZjScMVRnk
 DbdA8+jsFqeYCJC1JSnE6TShP2RvDNu5NjE2pInyWbXAA1PwcFM+bML+ZZ4kJlii
 9+cDqctXNC4MdxOJVMKEOEdoQ1M3yYzKn/J7an7Zly7kY54G8uJkQGCaBmlg1K0k
 r57WP0DpFu5kuNFFJg52bBcAOUPEgFiyIitICG+nMn9BjLA3zY7bjUSCGHviIzLm
 pNPL+t7KVWyyn5t8X25CuFUkCQskDSALpC3SFdL4iPo+fpBBw/GPqngjmx4zdrHg
 jkOImPWt2n2KK9I4kfxw/NIx8Q06wHHzIpY2uutHA++TNF8WMgXR1RvJgZvOAO0G
 JLGaOUZNV5BcTsK38ftEMh9awqBG9J4l8DPwPoRG/9r394W25O1KdjiNnTVH9qYU
 INUArhtfeeAYoSteDCflD7cgORbGQLOXBePtCO8+Ayt2lTJLW98CDfCrCAKawQLl
 O+RMxuDshobeH/AGT7yr
 =nsOM
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: cleanups for 5.7

- mark sie control block as 512 byte aligned
- use fallthrough;
2020-03-26 05:58:49 -04:00
Sean Christopherson 0774a964ef KVM: Fix out of range accesses to memslots
Reset the LRU slot if it becomes invalid when deleting a memslot to fix
an out-of-bounds/use-after-free access when searching through memslots.

Explicitly check for there being no used slots in search_memslots(), and
in the caller of s390's approximation variant.

Fixes: 36947254e5 ("KVM: Dynamically size memslot array based on number of used slots")
Reported-by: Qian Cai <cai@lca.pw>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-26 05:58:27 -04:00
Joe Perches 3b684a420b KVM: s390: Use fallthrough;
Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/d63c86429f3e5aa806aa3e185c97d213904924a5.1583896348.git.joe@perches.com
[borntrager@de.ibm.com: Fix link to tool and subject]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-23 18:30:07 +01:00
Paolo Bonzini 1c482452d5 KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
 2. protected virtual machines
   Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
   state like guest memory and guest registers anymore. Instead the
   PVMs are mostly managed by a new entity called Ultravisor (UV),
   which provides an API, so KVM and the PV can request management
   actions.
 
   PVMs are encrypted at rest and protected from hypervisor access
   while running.  They switch from a normal operation into protected
   mode, so we can still use the standard boot process to load a
   encrypted blob and then move it into protected mode.
 
   Rebooting is only possible by passing through the unprotected/normal
   mode and switching to protected again.
 
   One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
   add callbacks for inaccessible pages)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJeZf9tAAoJEBF7vIC1phx89J0P/iv3wCoMNDqAttnHa/UQFF04
 njUadNYkAADDrsabIEOs9O+BE1/4BVspnIunE4+xw76p5M/7/g5eIhXWcLudhlnL
 +XtvuEwz/2ffA9JWAAYNKB7cGqBM9BCC+iYzAF9ah6sPLmlDCoF+hRe0g+0tXSON
 cklUJFril9bOcxd/MxrzFLcmipbxT/Z4/10eBY+FHcm6SQGOKAtJH0xL7X3PfPI5
 L/6ZhML9exsj1Iplkrl8BomMRoYOrvfq/jMaZp9SwmfXaOKYmNU3a19MhzfZ593h
 bfR92H8kZRy/TpBd7EnpxYGQ/n53HkUhFMhtqkkkeHW1rCo8ccwC4VfnXb+KqQp+
 nJ8KieWG+OlKKFDuZPl5Gq+jQqjJfzchbyMTYnBNe+GPT5zg76tJXmQyDn5X9p3R
 mfg+9ZEeEonMu7px93Ht1gLdPiC2gjRckjuBDPqMGEhG2z2SQ/MLri+WnproIQRa
 TcE7rZBtuyrGFTq4M4dEcsUW02xnOaav6H57kkl8EwqYwgDHlqoUbt0AvLFyW07a
 RlH7drmhKDwTJkcOhOLeLNM8Un6NvnsLZ8Lbcr9rRf9Z9Lpc+zW88BSwJ7MM/GH8
 FEQM8Omnn8KAJTENpIm3bHHyvsi0kJEhl+c3Ila3QnYzXZbJ3ZDaJZngMAbUUnVl
 YNeFyyALzOgVVBx4kvTm
 =x6Hn
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features and Enhancements for 5.7 part1

1. Allow to disable gisa
2. protected virtual machines
  Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
  state like guest memory and guest registers anymore. Instead the
  PVMs are mostly managed by a new entity called Ultravisor (UV),
  which provides an API, so KVM and the PV can request management
  actions.

  PVMs are encrypted at rest and protected from hypervisor access
  while running.  They switch from a normal operation into protected
  mode, so we can still use the standard boot process to load a
  encrypted blob and then move it into protected mode.

  Rebooting is only possible by passing through the unprotected/normal
  mode and switching to protected again.

  One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
  add callbacks for inaccessible pages)
2020-03-16 18:19:34 +01:00
Peter Xu 4d39576259 KVM: Remove unnecessary asm/kvm_host.h includes
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers.  linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:57:34 +01:00