linux-stable/sound/soc/codecs/wm1250-ev1.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

255 lines
5.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for the 1250-EV1 audio I/O module
*
* Copyright 2011 Wolfson Microelectronics plc
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/wm1250-ev1.h>
static const char *wm1250_gpio_names[WM1250_EV1_NUM_GPIOS] = {
"WM1250 CLK_ENA",
"WM1250 CLK_SEL0",
"WM1250 CLK_SEL1",
"WM1250 OSR",
"WM1250 MASTER",
};
struct wm1250_priv {
struct gpio gpios[WM1250_EV1_NUM_GPIOS];
};
static int wm1250_ev1_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
struct wm1250_priv *wm1250 = dev_get_drvdata(component->dev);
int ena;
if (wm1250)
ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio;
else
ena = -1;
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
if (ena >= 0)
gpio_set_value_cansleep(ena, 1);
break;
case SND_SOC_BIAS_OFF:
if (ena >= 0)
gpio_set_value_cansleep(ena, 0);
break;
}
return 0;
}
static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = {
SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_INPUT("WM1250 Input"),
SND_SOC_DAPM_OUTPUT("WM1250 Output"),
};
static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = {
{ "ADC", NULL, "WM1250 Input" },
{ "WM1250 Output", NULL, "DAC" },
};
static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct wm1250_priv *wm1250 = snd_soc_component_get_drvdata(dai->component);
switch (params_rate(params)) {
case 8000:
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio,
1);
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio,
1);
break;
case 16000:
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio,
0);
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio,
1);
break;
case 32000:
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio,
1);
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio,
0);
break;
case 64000:
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio,
0);
gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio,
0);
break;
default:
return -EINVAL;
}
return 0;
}
static const struct snd_soc_dai_ops wm1250_ev1_ops = {
.hw_params = wm1250_ev1_hw_params,
};
#define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000)
static struct snd_soc_dai_driver wm1250_ev1_dai = {
.name = "wm1250-ev1",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = WM1250_EV1_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM1250_EV1_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
.ops = &wm1250_ev1_ops,
};
static const struct snd_soc_component_driver soc_component_dev_wm1250_ev1 = {
.dapm_widgets = wm1250_ev1_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets),
.dapm_routes = wm1250_ev1_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes),
.set_bias_level = wm1250_ev1_set_bias_level,
.use_pmdown_time = 1,
.endianness = 1,
};
static int wm1250_ev1_pdata(struct i2c_client *i2c)
{
struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev);
struct wm1250_priv *wm1250;
int i, ret;
if (!pdata)
return 0;
wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL);
if (!wm1250) {
ret = -ENOMEM;
goto err;
}
for (i = 0; i < ARRAY_SIZE(wm1250->gpios); i++) {
wm1250->gpios[i].gpio = pdata->gpios[i];
wm1250->gpios[i].label = wm1250_gpio_names[i];
wm1250->gpios[i].flags = GPIOF_OUT_INIT_LOW;
}
wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH;
wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH;
ret = gpio_request_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios));
if (ret != 0) {
dev_err(&i2c->dev, "Failed to get GPIOs: %d\n", ret);
goto err;
}
dev_set_drvdata(&i2c->dev, wm1250);
return ret;
err:
return ret;
}
static void wm1250_ev1_free(struct i2c_client *i2c)
{
struct wm1250_priv *wm1250 = dev_get_drvdata(&i2c->dev);
if (wm1250)
gpio_free_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios));
}
static int wm1250_ev1_probe(struct i2c_client *i2c)
{
int id, board, rev, ret;
dev_set_drvdata(&i2c->dev, NULL);
board = i2c_smbus_read_byte_data(i2c, 0);
if (board < 0) {
dev_err(&i2c->dev, "Failed to read ID: %d\n", board);
return board;
}
id = (board & 0xfe) >> 2;
rev = board & 0x3;
if (id != 1) {
dev_err(&i2c->dev, "Unknown board ID %d\n", id);
return -ENODEV;
}
dev_info(&i2c->dev, "revision %d\n", rev + 1);
ret = wm1250_ev1_pdata(i2c);
if (ret != 0)
return ret;
ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm1250_ev1,
&wm1250_ev1_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
wm1250_ev1_free(i2c);
return ret;
}
return 0;
}
static void wm1250_ev1_remove(struct i2c_client *i2c)
{
wm1250_ev1_free(i2c);
}
static const struct i2c_device_id wm1250_ev1_i2c_id[] = {
{ "wm1250-ev1", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id);
static struct i2c_driver wm1250_ev1_i2c_driver = {
.driver = {
.name = "wm1250-ev1",
},
.probe_new = wm1250_ev1_probe,
.remove = wm1250_ev1_remove,
.id_table = wm1250_ev1_i2c_id,
};
module_i2c_driver(wm1250_ev1_i2c_driver);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver");
MODULE_LICENSE("GPL");