mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-31 16:38:12 +00:00
34e526cb7d
Even though the boot protocol stipulates otherwise, an exception has
been made for the EFI stub, and entering the core kernel with the MMU
enabled is permitted. This allows a substantial amount of cache
maintenance to be elided, wich is significant when fast boot times are
critical (e.g., for booting micro-VMs)
Once the initial ID map has been populated, the MMU is disabled as part
of the logic sequence that puts all system registers into a known state.
Any code that needs to execute within the window where the MMU is off is
cleaned to the PoC explicitly, which includes all of HYP text when
entering at EL2.
However, the current sequence of initializing the EL2 system registers
is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2
is reprogrammed, and this means that a VHE-to-nVHE switch may occur
while the MMU is enabled. This switch causes some system registers as
well as page table descriptors to be interpreted in a different way,
potentially resulting in spurious exceptions relating to MMU
translation.
So disable the MMU explicitly first when entering in EL2 with the MMU
and caches enabled.
Fixes: 6178617038
("efi: arm64: enter with MMU and caches enabled")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240415075412.2347624-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
536 lines
13 KiB
ArmAsm
536 lines
13 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Low-level CPU initialisation
|
|
* Based on arch/arm/kernel/head.S
|
|
*
|
|
* Copyright (C) 1994-2002 Russell King
|
|
* Copyright (C) 2003-2012 ARM Ltd.
|
|
* Authors: Catalin Marinas <catalin.marinas@arm.com>
|
|
* Will Deacon <will.deacon@arm.com>
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pgtable.h>
|
|
|
|
#include <asm/asm_pointer_auth.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/boot.h>
|
|
#include <asm/bug.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/cputype.h>
|
|
#include <asm/el2_setup.h>
|
|
#include <asm/elf.h>
|
|
#include <asm/image.h>
|
|
#include <asm/kernel-pgtable.h>
|
|
#include <asm/kvm_arm.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/page.h>
|
|
#include <asm/scs.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/sysreg.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/virt.h>
|
|
|
|
#include "efi-header.S"
|
|
|
|
#if (PAGE_OFFSET & 0x1fffff) != 0
|
|
#error PAGE_OFFSET must be at least 2MB aligned
|
|
#endif
|
|
|
|
/*
|
|
* Kernel startup entry point.
|
|
* ---------------------------
|
|
*
|
|
* The requirements are:
|
|
* MMU = off, D-cache = off, I-cache = on or off,
|
|
* x0 = physical address to the FDT blob.
|
|
*
|
|
* Note that the callee-saved registers are used for storing variables
|
|
* that are useful before the MMU is enabled. The allocations are described
|
|
* in the entry routines.
|
|
*/
|
|
__HEAD
|
|
/*
|
|
* DO NOT MODIFY. Image header expected by Linux boot-loaders.
|
|
*/
|
|
efi_signature_nop // special NOP to identity as PE/COFF executable
|
|
b primary_entry // branch to kernel start, magic
|
|
.quad 0 // Image load offset from start of RAM, little-endian
|
|
le64sym _kernel_size_le // Effective size of kernel image, little-endian
|
|
le64sym _kernel_flags_le // Informative flags, little-endian
|
|
.quad 0 // reserved
|
|
.quad 0 // reserved
|
|
.quad 0 // reserved
|
|
.ascii ARM64_IMAGE_MAGIC // Magic number
|
|
.long .Lpe_header_offset // Offset to the PE header.
|
|
|
|
__EFI_PE_HEADER
|
|
|
|
.section ".idmap.text","a"
|
|
|
|
/*
|
|
* The following callee saved general purpose registers are used on the
|
|
* primary lowlevel boot path:
|
|
*
|
|
* Register Scope Purpose
|
|
* x19 primary_entry() .. start_kernel() whether we entered with the MMU on
|
|
* x20 primary_entry() .. __primary_switch() CPU boot mode
|
|
* x21 primary_entry() .. start_kernel() FDT pointer passed at boot in x0
|
|
*/
|
|
SYM_CODE_START(primary_entry)
|
|
bl record_mmu_state
|
|
bl preserve_boot_args
|
|
|
|
adrp x1, early_init_stack
|
|
mov sp, x1
|
|
mov x29, xzr
|
|
adrp x0, init_idmap_pg_dir
|
|
mov x1, xzr
|
|
bl __pi_create_init_idmap
|
|
|
|
/*
|
|
* If the page tables have been populated with non-cacheable
|
|
* accesses (MMU disabled), invalidate those tables again to
|
|
* remove any speculatively loaded cache lines.
|
|
*/
|
|
cbnz x19, 0f
|
|
dmb sy
|
|
mov x1, x0 // end of used region
|
|
adrp x0, init_idmap_pg_dir
|
|
adr_l x2, dcache_inval_poc
|
|
blr x2
|
|
b 1f
|
|
|
|
/*
|
|
* If we entered with the MMU and caches on, clean the ID mapped part
|
|
* of the primary boot code to the PoC so we can safely execute it with
|
|
* the MMU off.
|
|
*/
|
|
0: adrp x0, __idmap_text_start
|
|
adr_l x1, __idmap_text_end
|
|
adr_l x2, dcache_clean_poc
|
|
blr x2
|
|
|
|
1: mov x0, x19
|
|
bl init_kernel_el // w0=cpu_boot_mode
|
|
mov x20, x0
|
|
|
|
/*
|
|
* The following calls CPU setup code, see arch/arm64/mm/proc.S for
|
|
* details.
|
|
* On return, the CPU will be ready for the MMU to be turned on and
|
|
* the TCR will have been set.
|
|
*/
|
|
bl __cpu_setup // initialise processor
|
|
b __primary_switch
|
|
SYM_CODE_END(primary_entry)
|
|
|
|
__INIT
|
|
SYM_CODE_START_LOCAL(record_mmu_state)
|
|
mrs x19, CurrentEL
|
|
cmp x19, #CurrentEL_EL2
|
|
mrs x19, sctlr_el1
|
|
b.ne 0f
|
|
mrs x19, sctlr_el2
|
|
0:
|
|
CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f )
|
|
CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f )
|
|
tst x19, #SCTLR_ELx_C // Z := (C == 0)
|
|
and x19, x19, #SCTLR_ELx_M // isolate M bit
|
|
csel x19, xzr, x19, eq // clear x19 if Z
|
|
ret
|
|
|
|
/*
|
|
* Set the correct endianness early so all memory accesses issued
|
|
* before init_kernel_el() occur in the correct byte order. Note that
|
|
* this means the MMU must be disabled, or the active ID map will end
|
|
* up getting interpreted with the wrong byte order.
|
|
*/
|
|
1: eor x19, x19, #SCTLR_ELx_EE
|
|
bic x19, x19, #SCTLR_ELx_M
|
|
b.ne 2f
|
|
pre_disable_mmu_workaround
|
|
msr sctlr_el2, x19
|
|
b 3f
|
|
2: pre_disable_mmu_workaround
|
|
msr sctlr_el1, x19
|
|
3: isb
|
|
mov x19, xzr
|
|
ret
|
|
SYM_CODE_END(record_mmu_state)
|
|
|
|
/*
|
|
* Preserve the arguments passed by the bootloader in x0 .. x3
|
|
*/
|
|
SYM_CODE_START_LOCAL(preserve_boot_args)
|
|
mov x21, x0 // x21=FDT
|
|
|
|
adr_l x0, boot_args // record the contents of
|
|
stp x21, x1, [x0] // x0 .. x3 at kernel entry
|
|
stp x2, x3, [x0, #16]
|
|
|
|
cbnz x19, 0f // skip cache invalidation if MMU is on
|
|
dmb sy // needed before dc ivac with
|
|
// MMU off
|
|
|
|
add x1, x0, #0x20 // 4 x 8 bytes
|
|
b dcache_inval_poc // tail call
|
|
0: str_l x19, mmu_enabled_at_boot, x0
|
|
ret
|
|
SYM_CODE_END(preserve_boot_args)
|
|
|
|
/*
|
|
* Initialize CPU registers with task-specific and cpu-specific context.
|
|
*
|
|
* Create a final frame record at task_pt_regs(current)->stackframe, so
|
|
* that the unwinder can identify the final frame record of any task by
|
|
* its location in the task stack. We reserve the entire pt_regs space
|
|
* for consistency with user tasks and kthreads.
|
|
*/
|
|
.macro init_cpu_task tsk, tmp1, tmp2
|
|
msr sp_el0, \tsk
|
|
|
|
ldr \tmp1, [\tsk, #TSK_STACK]
|
|
add sp, \tmp1, #THREAD_SIZE
|
|
sub sp, sp, #PT_REGS_SIZE
|
|
|
|
stp xzr, xzr, [sp, #S_STACKFRAME]
|
|
add x29, sp, #S_STACKFRAME
|
|
|
|
scs_load_current
|
|
|
|
adr_l \tmp1, __per_cpu_offset
|
|
ldr w\tmp2, [\tsk, #TSK_TI_CPU]
|
|
ldr \tmp1, [\tmp1, \tmp2, lsl #3]
|
|
set_this_cpu_offset \tmp1
|
|
.endm
|
|
|
|
/*
|
|
* The following fragment of code is executed with the MMU enabled.
|
|
*
|
|
* x0 = __pa(KERNEL_START)
|
|
*/
|
|
SYM_FUNC_START_LOCAL(__primary_switched)
|
|
adr_l x4, init_task
|
|
init_cpu_task x4, x5, x6
|
|
|
|
adr_l x8, vectors // load VBAR_EL1 with virtual
|
|
msr vbar_el1, x8 // vector table address
|
|
isb
|
|
|
|
stp x29, x30, [sp, #-16]!
|
|
mov x29, sp
|
|
|
|
str_l x21, __fdt_pointer, x5 // Save FDT pointer
|
|
|
|
adrp x4, _text // Save the offset between
|
|
sub x4, x4, x0 // the kernel virtual and
|
|
str_l x4, kimage_voffset, x5 // physical mappings
|
|
|
|
mov x0, x20
|
|
bl set_cpu_boot_mode_flag
|
|
|
|
#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
|
|
bl kasan_early_init
|
|
#endif
|
|
mov x0, x20
|
|
bl finalise_el2 // Prefer VHE if possible
|
|
ldp x29, x30, [sp], #16
|
|
bl start_kernel
|
|
ASM_BUG()
|
|
SYM_FUNC_END(__primary_switched)
|
|
|
|
/*
|
|
* end early head section, begin head code that is also used for
|
|
* hotplug and needs to have the same protections as the text region
|
|
*/
|
|
.section ".idmap.text","a"
|
|
|
|
/*
|
|
* Starting from EL2 or EL1, configure the CPU to execute at the highest
|
|
* reachable EL supported by the kernel in a chosen default state. If dropping
|
|
* from EL2 to EL1, configure EL2 before configuring EL1.
|
|
*
|
|
* Since we cannot always rely on ERET synchronizing writes to sysregs (e.g. if
|
|
* SCTLR_ELx.EOS is clear), we place an ISB prior to ERET.
|
|
*
|
|
* Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if
|
|
* booted in EL1 or EL2 respectively, with the top 32 bits containing
|
|
* potential context flags. These flags are *not* stored in __boot_cpu_mode.
|
|
*
|
|
* x0: whether we are being called from the primary boot path with the MMU on
|
|
*/
|
|
SYM_FUNC_START(init_kernel_el)
|
|
mrs x1, CurrentEL
|
|
cmp x1, #CurrentEL_EL2
|
|
b.eq init_el2
|
|
|
|
SYM_INNER_LABEL(init_el1, SYM_L_LOCAL)
|
|
mov_q x0, INIT_SCTLR_EL1_MMU_OFF
|
|
pre_disable_mmu_workaround
|
|
msr sctlr_el1, x0
|
|
isb
|
|
mov_q x0, INIT_PSTATE_EL1
|
|
msr spsr_el1, x0
|
|
msr elr_el1, lr
|
|
mov w0, #BOOT_CPU_MODE_EL1
|
|
eret
|
|
|
|
SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
|
|
msr elr_el2, lr
|
|
|
|
// clean all HYP code to the PoC if we booted at EL2 with the MMU on
|
|
cbz x0, 0f
|
|
adrp x0, __hyp_idmap_text_start
|
|
adr_l x1, __hyp_text_end
|
|
adr_l x2, dcache_clean_poc
|
|
blr x2
|
|
|
|
mov_q x0, INIT_SCTLR_EL2_MMU_OFF
|
|
pre_disable_mmu_workaround
|
|
msr sctlr_el2, x0
|
|
isb
|
|
0:
|
|
mov_q x0, HCR_HOST_NVHE_FLAGS
|
|
|
|
/*
|
|
* Compliant CPUs advertise their VHE-onlyness with
|
|
* ID_AA64MMFR4_EL1.E2H0 < 0. HCR_EL2.E2H can be
|
|
* RES1 in that case. Publish the E2H bit early so that
|
|
* it can be picked up by the init_el2_state macro.
|
|
*
|
|
* Fruity CPUs seem to have HCR_EL2.E2H set to RAO/WI, but
|
|
* don't advertise it (they predate this relaxation).
|
|
*/
|
|
mrs_s x1, SYS_ID_AA64MMFR4_EL1
|
|
tbz x1, #(ID_AA64MMFR4_EL1_E2H0_SHIFT + ID_AA64MMFR4_EL1_E2H0_WIDTH - 1), 1f
|
|
|
|
orr x0, x0, #HCR_E2H
|
|
1:
|
|
msr hcr_el2, x0
|
|
isb
|
|
|
|
init_el2_state
|
|
|
|
/* Hypervisor stub */
|
|
adr_l x0, __hyp_stub_vectors
|
|
msr vbar_el2, x0
|
|
isb
|
|
|
|
mov_q x1, INIT_SCTLR_EL1_MMU_OFF
|
|
|
|
mrs x0, hcr_el2
|
|
and x0, x0, #HCR_E2H
|
|
cbz x0, 2f
|
|
|
|
/* Set a sane SCTLR_EL1, the VHE way */
|
|
msr_s SYS_SCTLR_EL12, x1
|
|
mov x2, #BOOT_CPU_FLAG_E2H
|
|
b 3f
|
|
|
|
2:
|
|
msr sctlr_el1, x1
|
|
mov x2, xzr
|
|
3:
|
|
__init_el2_nvhe_prepare_eret
|
|
|
|
mov w0, #BOOT_CPU_MODE_EL2
|
|
orr x0, x0, x2
|
|
eret
|
|
SYM_FUNC_END(init_kernel_el)
|
|
|
|
/*
|
|
* This provides a "holding pen" for platforms to hold all secondary
|
|
* cores are held until we're ready for them to initialise.
|
|
*/
|
|
SYM_FUNC_START(secondary_holding_pen)
|
|
mov x0, xzr
|
|
bl init_kernel_el // w0=cpu_boot_mode
|
|
mrs x2, mpidr_el1
|
|
mov_q x1, MPIDR_HWID_BITMASK
|
|
and x2, x2, x1
|
|
adr_l x3, secondary_holding_pen_release
|
|
pen: ldr x4, [x3]
|
|
cmp x4, x2
|
|
b.eq secondary_startup
|
|
wfe
|
|
b pen
|
|
SYM_FUNC_END(secondary_holding_pen)
|
|
|
|
/*
|
|
* Secondary entry point that jumps straight into the kernel. Only to
|
|
* be used where CPUs are brought online dynamically by the kernel.
|
|
*/
|
|
SYM_FUNC_START(secondary_entry)
|
|
mov x0, xzr
|
|
bl init_kernel_el // w0=cpu_boot_mode
|
|
b secondary_startup
|
|
SYM_FUNC_END(secondary_entry)
|
|
|
|
SYM_FUNC_START_LOCAL(secondary_startup)
|
|
/*
|
|
* Common entry point for secondary CPUs.
|
|
*/
|
|
mov x20, x0 // preserve boot mode
|
|
|
|
#ifdef CONFIG_ARM64_VA_BITS_52
|
|
alternative_if ARM64_HAS_VA52
|
|
bl __cpu_secondary_check52bitva
|
|
alternative_else_nop_endif
|
|
#endif
|
|
|
|
bl __cpu_setup // initialise processor
|
|
adrp x1, swapper_pg_dir
|
|
adrp x2, idmap_pg_dir
|
|
bl __enable_mmu
|
|
ldr x8, =__secondary_switched
|
|
br x8
|
|
SYM_FUNC_END(secondary_startup)
|
|
|
|
.text
|
|
SYM_FUNC_START_LOCAL(__secondary_switched)
|
|
mov x0, x20
|
|
bl set_cpu_boot_mode_flag
|
|
|
|
mov x0, x20
|
|
bl finalise_el2
|
|
|
|
str_l xzr, __early_cpu_boot_status, x3
|
|
adr_l x5, vectors
|
|
msr vbar_el1, x5
|
|
isb
|
|
|
|
adr_l x0, secondary_data
|
|
ldr x2, [x0, #CPU_BOOT_TASK]
|
|
cbz x2, __secondary_too_slow
|
|
|
|
init_cpu_task x2, x1, x3
|
|
|
|
#ifdef CONFIG_ARM64_PTR_AUTH
|
|
ptrauth_keys_init_cpu x2, x3, x4, x5
|
|
#endif
|
|
|
|
bl secondary_start_kernel
|
|
ASM_BUG()
|
|
SYM_FUNC_END(__secondary_switched)
|
|
|
|
SYM_FUNC_START_LOCAL(__secondary_too_slow)
|
|
wfe
|
|
wfi
|
|
b __secondary_too_slow
|
|
SYM_FUNC_END(__secondary_too_slow)
|
|
|
|
/*
|
|
* Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
|
|
* in w0. See arch/arm64/include/asm/virt.h for more info.
|
|
*/
|
|
SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag)
|
|
adr_l x1, __boot_cpu_mode
|
|
cmp w0, #BOOT_CPU_MODE_EL2
|
|
b.ne 1f
|
|
add x1, x1, #4
|
|
1: str w0, [x1] // Save CPU boot mode
|
|
ret
|
|
SYM_FUNC_END(set_cpu_boot_mode_flag)
|
|
|
|
/*
|
|
* The booting CPU updates the failed status @__early_cpu_boot_status,
|
|
* with MMU turned off.
|
|
*
|
|
* update_early_cpu_boot_status tmp, status
|
|
* - Corrupts tmp1, tmp2
|
|
* - Writes 'status' to __early_cpu_boot_status and makes sure
|
|
* it is committed to memory.
|
|
*/
|
|
|
|
.macro update_early_cpu_boot_status status, tmp1, tmp2
|
|
mov \tmp2, #\status
|
|
adr_l \tmp1, __early_cpu_boot_status
|
|
str \tmp2, [\tmp1]
|
|
dmb sy
|
|
dc ivac, \tmp1 // Invalidate potentially stale cache line
|
|
.endm
|
|
|
|
/*
|
|
* Enable the MMU.
|
|
*
|
|
* x0 = SCTLR_EL1 value for turning on the MMU.
|
|
* x1 = TTBR1_EL1 value
|
|
* x2 = ID map root table address
|
|
*
|
|
* Returns to the caller via x30/lr. This requires the caller to be covered
|
|
* by the .idmap.text section.
|
|
*
|
|
* Checks if the selected granule size is supported by the CPU.
|
|
* If it isn't, park the CPU
|
|
*/
|
|
.section ".idmap.text","a"
|
|
SYM_FUNC_START(__enable_mmu)
|
|
mrs x3, ID_AA64MMFR0_EL1
|
|
ubfx x3, x3, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4
|
|
cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN
|
|
b.lt __no_granule_support
|
|
cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX
|
|
b.gt __no_granule_support
|
|
phys_to_ttbr x2, x2
|
|
msr ttbr0_el1, x2 // load TTBR0
|
|
load_ttbr1 x1, x1, x3
|
|
|
|
set_sctlr_el1 x0
|
|
|
|
ret
|
|
SYM_FUNC_END(__enable_mmu)
|
|
|
|
#ifdef CONFIG_ARM64_VA_BITS_52
|
|
SYM_FUNC_START(__cpu_secondary_check52bitva)
|
|
#ifndef CONFIG_ARM64_LPA2
|
|
mrs_s x0, SYS_ID_AA64MMFR2_EL1
|
|
and x0, x0, ID_AA64MMFR2_EL1_VARange_MASK
|
|
cbnz x0, 2f
|
|
#else
|
|
mrs x0, id_aa64mmfr0_el1
|
|
sbfx x0, x0, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4
|
|
cmp x0, #ID_AA64MMFR0_EL1_TGRAN_LPA2
|
|
b.ge 2f
|
|
#endif
|
|
|
|
update_early_cpu_boot_status \
|
|
CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_52_BIT_VA, x0, x1
|
|
1: wfe
|
|
wfi
|
|
b 1b
|
|
|
|
2: ret
|
|
SYM_FUNC_END(__cpu_secondary_check52bitva)
|
|
#endif
|
|
|
|
SYM_FUNC_START_LOCAL(__no_granule_support)
|
|
/* Indicate that this CPU can't boot and is stuck in the kernel */
|
|
update_early_cpu_boot_status \
|
|
CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_NO_GRAN, x1, x2
|
|
1:
|
|
wfe
|
|
wfi
|
|
b 1b
|
|
SYM_FUNC_END(__no_granule_support)
|
|
|
|
SYM_FUNC_START_LOCAL(__primary_switch)
|
|
adrp x1, reserved_pg_dir
|
|
adrp x2, init_idmap_pg_dir
|
|
bl __enable_mmu
|
|
|
|
adrp x1, early_init_stack
|
|
mov sp, x1
|
|
mov x29, xzr
|
|
mov x0, x20 // pass the full boot status
|
|
mov x1, x21 // pass the FDT
|
|
bl __pi_early_map_kernel // Map and relocate the kernel
|
|
|
|
ldr x8, =__primary_switched
|
|
adrp x0, KERNEL_START // __pa(KERNEL_START)
|
|
br x8
|
|
SYM_FUNC_END(__primary_switch)
|