mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
74 lines
1.7 KiB
YAML
74 lines
1.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ASIX AX88796C SPI Ethernet Adapter
|
|
|
|
maintainers:
|
|
- Łukasz Stelmach <l.stelmach@samsung.com>
|
|
|
|
description: |
|
|
ASIX AX88796C is an Ethernet controller with a built in PHY. This
|
|
describes SPI mode of the chip.
|
|
|
|
The node for this driver must be a child node of an SPI controller,
|
|
hence all mandatory properties described in
|
|
../spi/spi-controller.yaml must be specified.
|
|
|
|
allOf:
|
|
- $ref: ethernet-controller.yaml#
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml
|
|
|
|
properties:
|
|
compatible:
|
|
const: asix,ax88796c
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
spi-max-frequency:
|
|
maximum: 40000000
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description:
|
|
A GPIO line handling reset of the chip. As the line is active low,
|
|
it should be marked GPIO_ACTIVE_LOW.
|
|
maxItems: 1
|
|
|
|
controller-data: true
|
|
local-mac-address: true
|
|
mac-address: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- spi-max-frequency
|
|
- interrupts
|
|
- reset-gpios
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
# Artik5 eval board
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethernet@0 {
|
|
compatible = "asix,ax88796c";
|
|
reg = <0x0>;
|
|
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
|
|
interrupt-parent = <&gpx2>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
spi-max-frequency = <40000000>;
|
|
reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|