mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
8c9d734cdf
The Logitech G Powerplay has a lightspeed receiver with a static HID++ device with ID 7 attached to it to. It is used to configure the led on the mat. For this reason I increased the max number of devices. Signed-off-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
1912 lines
62 KiB
C
1912 lines
62 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* HID driver for Logitech Unifying receivers
|
|
*
|
|
* Copyright (c) 2011 Logitech
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb.h> /* For to_usb_interface for kvm extra intf check */
|
|
#include <asm/unaligned.h>
|
|
#include "hid-ids.h"
|
|
|
|
#define DJ_MAX_PAIRED_DEVICES 7
|
|
#define DJ_MAX_NUMBER_NOTIFS 8
|
|
#define DJ_RECEIVER_INDEX 0
|
|
#define DJ_DEVICE_INDEX_MIN 1
|
|
#define DJ_DEVICE_INDEX_MAX 7
|
|
|
|
#define DJREPORT_SHORT_LENGTH 15
|
|
#define DJREPORT_LONG_LENGTH 32
|
|
|
|
#define REPORT_ID_DJ_SHORT 0x20
|
|
#define REPORT_ID_DJ_LONG 0x21
|
|
|
|
#define REPORT_ID_HIDPP_SHORT 0x10
|
|
#define REPORT_ID_HIDPP_LONG 0x11
|
|
#define REPORT_ID_HIDPP_VERY_LONG 0x12
|
|
|
|
#define HIDPP_REPORT_SHORT_LENGTH 7
|
|
#define HIDPP_REPORT_LONG_LENGTH 20
|
|
|
|
#define HIDPP_RECEIVER_INDEX 0xff
|
|
|
|
#define REPORT_TYPE_RFREPORT_FIRST 0x01
|
|
#define REPORT_TYPE_RFREPORT_LAST 0x1F
|
|
|
|
/* Command Switch to DJ mode */
|
|
#define REPORT_TYPE_CMD_SWITCH 0x80
|
|
#define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
|
|
#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01
|
|
#define TIMEOUT_NO_KEEPALIVE 0x00
|
|
|
|
/* Command to Get the list of Paired devices */
|
|
#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81
|
|
|
|
/* Device Paired Notification */
|
|
#define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41
|
|
#define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01
|
|
#define SPFUNCTION_DEVICE_LIST_EMPTY 0x02
|
|
#define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
|
|
#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01
|
|
#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02
|
|
#define DEVICE_PAIRED_RF_REPORT_TYPE 0x03
|
|
|
|
/* Device Un-Paired Notification */
|
|
#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40
|
|
|
|
/* Connection Status Notification */
|
|
#define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42
|
|
#define CONNECTION_STATUS_PARAM_STATUS 0x00
|
|
#define STATUS_LINKLOSS 0x01
|
|
|
|
/* Error Notification */
|
|
#define REPORT_TYPE_NOTIF_ERROR 0x7F
|
|
#define NOTIF_ERROR_PARAM_ETYPE 0x00
|
|
#define ETYPE_KEEPALIVE_TIMEOUT 0x01
|
|
|
|
/* supported DJ HID && RF report types */
|
|
#define REPORT_TYPE_KEYBOARD 0x01
|
|
#define REPORT_TYPE_MOUSE 0x02
|
|
#define REPORT_TYPE_CONSUMER_CONTROL 0x03
|
|
#define REPORT_TYPE_SYSTEM_CONTROL 0x04
|
|
#define REPORT_TYPE_MEDIA_CENTER 0x08
|
|
#define REPORT_TYPE_LEDS 0x0E
|
|
|
|
/* RF Report types bitfield */
|
|
#define STD_KEYBOARD BIT(1)
|
|
#define STD_MOUSE BIT(2)
|
|
#define MULTIMEDIA BIT(3)
|
|
#define POWER_KEYS BIT(4)
|
|
#define MEDIA_CENTER BIT(8)
|
|
#define KBD_LEDS BIT(14)
|
|
/* Fake (bitnr > NUMBER_OF_HID_REPORTS) bit to track HID++ capability */
|
|
#define HIDPP BIT_ULL(63)
|
|
|
|
/* HID++ Device Connected Notification */
|
|
#define REPORT_TYPE_NOTIF_DEVICE_CONNECTED 0x41
|
|
#define HIDPP_PARAM_PROTO_TYPE 0x00
|
|
#define HIDPP_PARAM_DEVICE_INFO 0x01
|
|
#define HIDPP_PARAM_EQUAD_LSB 0x02
|
|
#define HIDPP_PARAM_EQUAD_MSB 0x03
|
|
#define HIDPP_PARAM_27MHZ_DEVID 0x03
|
|
#define HIDPP_DEVICE_TYPE_MASK GENMASK(3, 0)
|
|
#define HIDPP_LINK_STATUS_MASK BIT(6)
|
|
#define HIDPP_MANUFACTURER_MASK BIT(7)
|
|
|
|
#define HIDPP_DEVICE_TYPE_KEYBOARD 1
|
|
#define HIDPP_DEVICE_TYPE_MOUSE 2
|
|
|
|
#define HIDPP_SET_REGISTER 0x80
|
|
#define HIDPP_GET_LONG_REGISTER 0x83
|
|
#define HIDPP_REG_CONNECTION_STATE 0x02
|
|
#define HIDPP_REG_PAIRING_INFORMATION 0xB5
|
|
#define HIDPP_PAIRING_INFORMATION 0x20
|
|
#define HIDPP_FAKE_DEVICE_ARRIVAL 0x02
|
|
|
|
enum recvr_type {
|
|
recvr_type_dj,
|
|
recvr_type_hidpp,
|
|
recvr_type_gaming_hidpp,
|
|
recvr_type_mouse_only,
|
|
recvr_type_27mhz,
|
|
recvr_type_bluetooth,
|
|
};
|
|
|
|
struct dj_report {
|
|
u8 report_id;
|
|
u8 device_index;
|
|
u8 report_type;
|
|
u8 report_params[DJREPORT_SHORT_LENGTH - 3];
|
|
};
|
|
|
|
struct hidpp_event {
|
|
u8 report_id;
|
|
u8 device_index;
|
|
u8 sub_id;
|
|
u8 params[HIDPP_REPORT_LONG_LENGTH - 3U];
|
|
} __packed;
|
|
|
|
struct dj_receiver_dev {
|
|
struct hid_device *mouse;
|
|
struct hid_device *keyboard;
|
|
struct hid_device *hidpp;
|
|
struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES +
|
|
DJ_DEVICE_INDEX_MIN];
|
|
struct list_head list;
|
|
struct kref kref;
|
|
struct work_struct work;
|
|
struct kfifo notif_fifo;
|
|
unsigned long last_query; /* in jiffies */
|
|
bool ready;
|
|
enum recvr_type type;
|
|
unsigned int unnumbered_application;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
struct dj_device {
|
|
struct hid_device *hdev;
|
|
struct dj_receiver_dev *dj_receiver_dev;
|
|
u64 reports_supported;
|
|
u8 device_index;
|
|
};
|
|
|
|
#define WORKITEM_TYPE_EMPTY 0
|
|
#define WORKITEM_TYPE_PAIRED 1
|
|
#define WORKITEM_TYPE_UNPAIRED 2
|
|
#define WORKITEM_TYPE_UNKNOWN 255
|
|
|
|
struct dj_workitem {
|
|
u8 type; /* WORKITEM_TYPE_* */
|
|
u8 device_index;
|
|
u8 device_type;
|
|
u8 quad_id_msb;
|
|
u8 quad_id_lsb;
|
|
u64 reports_supported;
|
|
};
|
|
|
|
/* Keyboard descriptor (1) */
|
|
static const char kbd_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (generic Desktop) */
|
|
0x09, 0x06, /* USAGE (Keyboard) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x01, /* REPORT_ID (1) */
|
|
0x95, 0x08, /* REPORT_COUNT (8) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
|
|
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
|
|
0x05, 0x07, /* USAGE_PAGE (Keyboard) */
|
|
0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */
|
|
0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */
|
|
0x81, 0x02, /* INPUT (Data,Var,Abs) */
|
|
0x95, 0x06, /* REPORT_COUNT (6) */
|
|
0x75, 0x08, /* REPORT_SIZE (8) */
|
|
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
|
|
0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */
|
|
0x05, 0x07, /* USAGE_PAGE (Keyboard) */
|
|
0x19, 0x00, /* USAGE_MINIMUM (no event) */
|
|
0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */
|
|
0x81, 0x00, /* INPUT (Data,Ary,Abs) */
|
|
0x85, 0x0e, /* REPORT_ID (14) */
|
|
0x05, 0x08, /* USAGE PAGE (LED page) */
|
|
0x95, 0x05, /* REPORT COUNT (5) */
|
|
0x75, 0x01, /* REPORT SIZE (1) */
|
|
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
|
|
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
|
|
0x19, 0x01, /* USAGE MINIMUM (1) */
|
|
0x29, 0x05, /* USAGE MAXIMUM (5) */
|
|
0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
|
|
0x95, 0x01, /* REPORT COUNT (1) */
|
|
0x75, 0x03, /* REPORT SIZE (3) */
|
|
0x91, 0x01, /* OUTPUT (Constant) */
|
|
0xC0
|
|
};
|
|
|
|
/* Mouse descriptor (2) */
|
|
static const char mse_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
|
|
0x09, 0x02, /* USAGE (Mouse) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x02, /* REPORT_ID = 2 */
|
|
0x09, 0x01, /* USAGE (pointer) */
|
|
0xA1, 0x00, /* COLLECTION (physical) */
|
|
0x05, 0x09, /* USAGE_PAGE (buttons) */
|
|
0x19, 0x01, /* USAGE_MIN (1) */
|
|
0x29, 0x10, /* USAGE_MAX (16) */
|
|
0x15, 0x00, /* LOGICAL_MIN (0) */
|
|
0x25, 0x01, /* LOGICAL_MAX (1) */
|
|
0x95, 0x10, /* REPORT_COUNT (16) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x81, 0x02, /* INPUT (data var abs) */
|
|
0x05, 0x01, /* USAGE_PAGE (generic desktop) */
|
|
0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
|
|
0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
|
|
0x75, 0x0C, /* REPORT_SIZE (12) */
|
|
0x95, 0x02, /* REPORT_COUNT (2) */
|
|
0x09, 0x30, /* USAGE (X) */
|
|
0x09, 0x31, /* USAGE (Y) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x15, 0x81, /* LOGICAL_MIN (-127) */
|
|
0x25, 0x7F, /* LOGICAL_MAX (127) */
|
|
0x75, 0x08, /* REPORT_SIZE (8) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x09, 0x38, /* USAGE (wheel) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x05, 0x0C, /* USAGE_PAGE(consumer) */
|
|
0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x81, 0x06, /* INPUT */
|
|
0xC0, /* END_COLLECTION */
|
|
0xC0, /* END_COLLECTION */
|
|
};
|
|
|
|
/* Mouse descriptor (2) for 27 MHz receiver, only 8 buttons */
|
|
static const char mse_27mhz_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
|
|
0x09, 0x02, /* USAGE (Mouse) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x02, /* REPORT_ID = 2 */
|
|
0x09, 0x01, /* USAGE (pointer) */
|
|
0xA1, 0x00, /* COLLECTION (physical) */
|
|
0x05, 0x09, /* USAGE_PAGE (buttons) */
|
|
0x19, 0x01, /* USAGE_MIN (1) */
|
|
0x29, 0x08, /* USAGE_MAX (8) */
|
|
0x15, 0x00, /* LOGICAL_MIN (0) */
|
|
0x25, 0x01, /* LOGICAL_MAX (1) */
|
|
0x95, 0x08, /* REPORT_COUNT (8) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x81, 0x02, /* INPUT (data var abs) */
|
|
0x05, 0x01, /* USAGE_PAGE (generic desktop) */
|
|
0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
|
|
0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
|
|
0x75, 0x0C, /* REPORT_SIZE (12) */
|
|
0x95, 0x02, /* REPORT_COUNT (2) */
|
|
0x09, 0x30, /* USAGE (X) */
|
|
0x09, 0x31, /* USAGE (Y) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x15, 0x81, /* LOGICAL_MIN (-127) */
|
|
0x25, 0x7F, /* LOGICAL_MAX (127) */
|
|
0x75, 0x08, /* REPORT_SIZE (8) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x09, 0x38, /* USAGE (wheel) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x05, 0x0C, /* USAGE_PAGE(consumer) */
|
|
0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x81, 0x06, /* INPUT */
|
|
0xC0, /* END_COLLECTION */
|
|
0xC0, /* END_COLLECTION */
|
|
};
|
|
|
|
/* Mouse descriptor (2) for Bluetooth receiver, low-res hwheel, 12 buttons */
|
|
static const char mse_bluetooth_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
|
|
0x09, 0x02, /* USAGE (Mouse) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x02, /* REPORT_ID = 2 */
|
|
0x09, 0x01, /* USAGE (pointer) */
|
|
0xA1, 0x00, /* COLLECTION (physical) */
|
|
0x05, 0x09, /* USAGE_PAGE (buttons) */
|
|
0x19, 0x01, /* USAGE_MIN (1) */
|
|
0x29, 0x08, /* USAGE_MAX (8) */
|
|
0x15, 0x00, /* LOGICAL_MIN (0) */
|
|
0x25, 0x01, /* LOGICAL_MAX (1) */
|
|
0x95, 0x08, /* REPORT_COUNT (8) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x81, 0x02, /* INPUT (data var abs) */
|
|
0x05, 0x01, /* USAGE_PAGE (generic desktop) */
|
|
0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */
|
|
0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */
|
|
0x75, 0x0C, /* REPORT_SIZE (12) */
|
|
0x95, 0x02, /* REPORT_COUNT (2) */
|
|
0x09, 0x30, /* USAGE (X) */
|
|
0x09, 0x31, /* USAGE (Y) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x15, 0x81, /* LOGICAL_MIN (-127) */
|
|
0x25, 0x7F, /* LOGICAL_MAX (127) */
|
|
0x75, 0x08, /* REPORT_SIZE (8) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x09, 0x38, /* USAGE (wheel) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x05, 0x0C, /* USAGE_PAGE(consumer) */
|
|
0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
|
|
0x15, 0xF9, /* LOGICAL_MIN (-7) */
|
|
0x25, 0x07, /* LOGICAL_MAX (7) */
|
|
0x75, 0x04, /* REPORT_SIZE (4) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x05, 0x09, /* USAGE_PAGE (buttons) */
|
|
0x19, 0x09, /* USAGE_MIN (9) */
|
|
0x29, 0x0C, /* USAGE_MAX (12) */
|
|
0x15, 0x00, /* LOGICAL_MIN (0) */
|
|
0x25, 0x01, /* LOGICAL_MAX (1) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x95, 0x04, /* REPORT_COUNT (4) */
|
|
0x81, 0x06, /* INPUT */
|
|
0xC0, /* END_COLLECTION */
|
|
0xC0, /* END_COLLECTION */
|
|
};
|
|
|
|
/* Gaming Mouse descriptor (2) */
|
|
static const char mse_high_res_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
|
|
0x09, 0x02, /* USAGE (Mouse) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x02, /* REPORT_ID = 2 */
|
|
0x09, 0x01, /* USAGE (pointer) */
|
|
0xA1, 0x00, /* COLLECTION (physical) */
|
|
0x05, 0x09, /* USAGE_PAGE (buttons) */
|
|
0x19, 0x01, /* USAGE_MIN (1) */
|
|
0x29, 0x10, /* USAGE_MAX (16) */
|
|
0x15, 0x00, /* LOGICAL_MIN (0) */
|
|
0x25, 0x01, /* LOGICAL_MAX (1) */
|
|
0x95, 0x10, /* REPORT_COUNT (16) */
|
|
0x75, 0x01, /* REPORT_SIZE (1) */
|
|
0x81, 0x02, /* INPUT (data var abs) */
|
|
0x05, 0x01, /* USAGE_PAGE (generic desktop) */
|
|
0x16, 0x01, 0x80, /* LOGICAL_MIN (-32767) */
|
|
0x26, 0xFF, 0x7F, /* LOGICAL_MAX (32767) */
|
|
0x75, 0x10, /* REPORT_SIZE (16) */
|
|
0x95, 0x02, /* REPORT_COUNT (2) */
|
|
0x09, 0x30, /* USAGE (X) */
|
|
0x09, 0x31, /* USAGE (Y) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x15, 0x81, /* LOGICAL_MIN (-127) */
|
|
0x25, 0x7F, /* LOGICAL_MAX (127) */
|
|
0x75, 0x08, /* REPORT_SIZE (8) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x09, 0x38, /* USAGE (wheel) */
|
|
0x81, 0x06, /* INPUT */
|
|
0x05, 0x0C, /* USAGE_PAGE(consumer) */
|
|
0x0A, 0x38, 0x02, /* USAGE(AC Pan) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x81, 0x06, /* INPUT */
|
|
0xC0, /* END_COLLECTION */
|
|
0xC0, /* END_COLLECTION */
|
|
};
|
|
|
|
/* Consumer Control descriptor (3) */
|
|
static const char consumer_descriptor[] = {
|
|
0x05, 0x0C, /* USAGE_PAGE (Consumer Devices) */
|
|
0x09, 0x01, /* USAGE (Consumer Control) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x03, /* REPORT_ID = 3 */
|
|
0x75, 0x10, /* REPORT_SIZE (16) */
|
|
0x95, 0x02, /* REPORT_COUNT (2) */
|
|
0x15, 0x01, /* LOGICAL_MIN (1) */
|
|
0x26, 0xFF, 0x02, /* LOGICAL_MAX (767) */
|
|
0x19, 0x01, /* USAGE_MIN (1) */
|
|
0x2A, 0xFF, 0x02, /* USAGE_MAX (767) */
|
|
0x81, 0x00, /* INPUT (Data Ary Abs) */
|
|
0xC0, /* END_COLLECTION */
|
|
}; /* */
|
|
|
|
/* System control descriptor (4) */
|
|
static const char syscontrol_descriptor[] = {
|
|
0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
|
|
0x09, 0x80, /* USAGE (System Control) */
|
|
0xA1, 0x01, /* COLLECTION (Application) */
|
|
0x85, 0x04, /* REPORT_ID = 4 */
|
|
0x75, 0x02, /* REPORT_SIZE (2) */
|
|
0x95, 0x01, /* REPORT_COUNT (1) */
|
|
0x15, 0x01, /* LOGICAL_MIN (1) */
|
|
0x25, 0x03, /* LOGICAL_MAX (3) */
|
|
0x09, 0x82, /* USAGE (System Sleep) */
|
|
0x09, 0x81, /* USAGE (System Power Down) */
|
|
0x09, 0x83, /* USAGE (System Wake Up) */
|
|
0x81, 0x60, /* INPUT (Data Ary Abs NPrf Null) */
|
|
0x75, 0x06, /* REPORT_SIZE (6) */
|
|
0x81, 0x03, /* INPUT (Cnst Var Abs) */
|
|
0xC0, /* END_COLLECTION */
|
|
};
|
|
|
|
/* Media descriptor (8) */
|
|
static const char media_descriptor[] = {
|
|
0x06, 0xbc, 0xff, /* Usage Page 0xffbc */
|
|
0x09, 0x88, /* Usage 0x0088 */
|
|
0xa1, 0x01, /* BeginCollection */
|
|
0x85, 0x08, /* Report ID 8 */
|
|
0x19, 0x01, /* Usage Min 0x0001 */
|
|
0x29, 0xff, /* Usage Max 0x00ff */
|
|
0x15, 0x01, /* Logical Min 1 */
|
|
0x26, 0xff, 0x00, /* Logical Max 255 */
|
|
0x75, 0x08, /* Report Size 8 */
|
|
0x95, 0x01, /* Report Count 1 */
|
|
0x81, 0x00, /* Input */
|
|
0xc0, /* EndCollection */
|
|
}; /* */
|
|
|
|
/* HIDPP descriptor */
|
|
static const char hidpp_descriptor[] = {
|
|
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
|
|
0x09, 0x01, /* Usage (Vendor Usage 1) */
|
|
0xa1, 0x01, /* Collection (Application) */
|
|
0x85, 0x10, /* Report ID (16) */
|
|
0x75, 0x08, /* Report Size (8) */
|
|
0x95, 0x06, /* Report Count (6) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x26, 0xff, 0x00, /* Logical Maximum (255) */
|
|
0x09, 0x01, /* Usage (Vendor Usage 1) */
|
|
0x81, 0x00, /* Input (Data,Arr,Abs) */
|
|
0x09, 0x01, /* Usage (Vendor Usage 1) */
|
|
0x91, 0x00, /* Output (Data,Arr,Abs) */
|
|
0xc0, /* End Collection */
|
|
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
|
|
0x09, 0x02, /* Usage (Vendor Usage 2) */
|
|
0xa1, 0x01, /* Collection (Application) */
|
|
0x85, 0x11, /* Report ID (17) */
|
|
0x75, 0x08, /* Report Size (8) */
|
|
0x95, 0x13, /* Report Count (19) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x26, 0xff, 0x00, /* Logical Maximum (255) */
|
|
0x09, 0x02, /* Usage (Vendor Usage 2) */
|
|
0x81, 0x00, /* Input (Data,Arr,Abs) */
|
|
0x09, 0x02, /* Usage (Vendor Usage 2) */
|
|
0x91, 0x00, /* Output (Data,Arr,Abs) */
|
|
0xc0, /* End Collection */
|
|
0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */
|
|
0x09, 0x04, /* Usage (Vendor Usage 0x04) */
|
|
0xa1, 0x01, /* Collection (Application) */
|
|
0x85, 0x20, /* Report ID (32) */
|
|
0x75, 0x08, /* Report Size (8) */
|
|
0x95, 0x0e, /* Report Count (14) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x26, 0xff, 0x00, /* Logical Maximum (255) */
|
|
0x09, 0x41, /* Usage (Vendor Usage 0x41) */
|
|
0x81, 0x00, /* Input (Data,Arr,Abs) */
|
|
0x09, 0x41, /* Usage (Vendor Usage 0x41) */
|
|
0x91, 0x00, /* Output (Data,Arr,Abs) */
|
|
0x85, 0x21, /* Report ID (33) */
|
|
0x95, 0x1f, /* Report Count (31) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x26, 0xff, 0x00, /* Logical Maximum (255) */
|
|
0x09, 0x42, /* Usage (Vendor Usage 0x42) */
|
|
0x81, 0x00, /* Input (Data,Arr,Abs) */
|
|
0x09, 0x42, /* Usage (Vendor Usage 0x42) */
|
|
0x91, 0x00, /* Output (Data,Arr,Abs) */
|
|
0xc0, /* End Collection */
|
|
};
|
|
|
|
/* Maximum size of all defined hid reports in bytes (including report id) */
|
|
#define MAX_REPORT_SIZE 8
|
|
|
|
/* Make sure all descriptors are present here */
|
|
#define MAX_RDESC_SIZE \
|
|
(sizeof(kbd_descriptor) + \
|
|
sizeof(mse_bluetooth_descriptor) + \
|
|
sizeof(consumer_descriptor) + \
|
|
sizeof(syscontrol_descriptor) + \
|
|
sizeof(media_descriptor) + \
|
|
sizeof(hidpp_descriptor))
|
|
|
|
/* Number of possible hid report types that can be created by this driver.
|
|
*
|
|
* Right now, RF report types have the same report types (or report id's)
|
|
* than the hid report created from those RF reports. In the future
|
|
* this doesnt have to be true.
|
|
*
|
|
* For instance, RF report type 0x01 which has a size of 8 bytes, corresponds
|
|
* to hid report id 0x01, this is standard keyboard. Same thing applies to mice
|
|
* reports and consumer control, etc. If a new RF report is created, it doesn't
|
|
* has to have the same report id as its corresponding hid report, so an
|
|
* translation may have to take place for future report types.
|
|
*/
|
|
#define NUMBER_OF_HID_REPORTS 32
|
|
static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {
|
|
[1] = 8, /* Standard keyboard */
|
|
[2] = 8, /* Standard mouse */
|
|
[3] = 5, /* Consumer control */
|
|
[4] = 2, /* System control */
|
|
[8] = 2, /* Media Center */
|
|
};
|
|
|
|
|
|
#define LOGITECH_DJ_INTERFACE_NUMBER 0x02
|
|
|
|
static struct hid_ll_driver logi_dj_ll_driver;
|
|
|
|
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
|
|
static void delayedwork_callback(struct work_struct *work);
|
|
|
|
static LIST_HEAD(dj_hdev_list);
|
|
static DEFINE_MUTEX(dj_hdev_list_lock);
|
|
|
|
/*
|
|
* dj/HID++ receivers are really a single logical entity, but for BIOS/Windows
|
|
* compatibility they have multiple USB interfaces. On HID++ receivers we need
|
|
* to listen for input reports on both interfaces. The functions below are used
|
|
* to create a single struct dj_receiver_dev for all interfaces belonging to
|
|
* a single USB-device / receiver.
|
|
*/
|
|
static struct dj_receiver_dev *dj_find_receiver_dev(struct hid_device *hdev,
|
|
enum recvr_type type)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev;
|
|
char sep;
|
|
|
|
/*
|
|
* The bluetooth receiver contains a built-in hub and has separate
|
|
* USB-devices for the keyboard and mouse interfaces.
|
|
*/
|
|
sep = (type == recvr_type_bluetooth) ? '.' : '/';
|
|
|
|
/* Try to find an already-probed interface from the same device */
|
|
list_for_each_entry(djrcv_dev, &dj_hdev_list, list) {
|
|
if (djrcv_dev->mouse &&
|
|
hid_compare_device_paths(hdev, djrcv_dev->mouse, sep)) {
|
|
kref_get(&djrcv_dev->kref);
|
|
return djrcv_dev;
|
|
}
|
|
if (djrcv_dev->keyboard &&
|
|
hid_compare_device_paths(hdev, djrcv_dev->keyboard, sep)) {
|
|
kref_get(&djrcv_dev->kref);
|
|
return djrcv_dev;
|
|
}
|
|
if (djrcv_dev->hidpp &&
|
|
hid_compare_device_paths(hdev, djrcv_dev->hidpp, sep)) {
|
|
kref_get(&djrcv_dev->kref);
|
|
return djrcv_dev;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void dj_release_receiver_dev(struct kref *kref)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = container_of(kref, struct dj_receiver_dev, kref);
|
|
|
|
list_del(&djrcv_dev->list);
|
|
kfifo_free(&djrcv_dev->notif_fifo);
|
|
kfree(djrcv_dev);
|
|
}
|
|
|
|
static void dj_put_receiver_dev(struct hid_device *hdev)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
|
|
mutex_lock(&dj_hdev_list_lock);
|
|
|
|
if (djrcv_dev->mouse == hdev)
|
|
djrcv_dev->mouse = NULL;
|
|
if (djrcv_dev->keyboard == hdev)
|
|
djrcv_dev->keyboard = NULL;
|
|
if (djrcv_dev->hidpp == hdev)
|
|
djrcv_dev->hidpp = NULL;
|
|
|
|
kref_put(&djrcv_dev->kref, dj_release_receiver_dev);
|
|
|
|
mutex_unlock(&dj_hdev_list_lock);
|
|
}
|
|
|
|
static struct dj_receiver_dev *dj_get_receiver_dev(struct hid_device *hdev,
|
|
enum recvr_type type,
|
|
unsigned int application,
|
|
bool is_hidpp)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev;
|
|
|
|
mutex_lock(&dj_hdev_list_lock);
|
|
|
|
djrcv_dev = dj_find_receiver_dev(hdev, type);
|
|
if (!djrcv_dev) {
|
|
djrcv_dev = kzalloc(sizeof(*djrcv_dev), GFP_KERNEL);
|
|
if (!djrcv_dev)
|
|
goto out;
|
|
|
|
INIT_WORK(&djrcv_dev->work, delayedwork_callback);
|
|
spin_lock_init(&djrcv_dev->lock);
|
|
if (kfifo_alloc(&djrcv_dev->notif_fifo,
|
|
DJ_MAX_NUMBER_NOTIFS * sizeof(struct dj_workitem),
|
|
GFP_KERNEL)) {
|
|
kfree(djrcv_dev);
|
|
djrcv_dev = NULL;
|
|
goto out;
|
|
}
|
|
kref_init(&djrcv_dev->kref);
|
|
list_add_tail(&djrcv_dev->list, &dj_hdev_list);
|
|
djrcv_dev->last_query = jiffies;
|
|
djrcv_dev->type = type;
|
|
}
|
|
|
|
if (application == HID_GD_KEYBOARD)
|
|
djrcv_dev->keyboard = hdev;
|
|
if (application == HID_GD_MOUSE)
|
|
djrcv_dev->mouse = hdev;
|
|
if (is_hidpp)
|
|
djrcv_dev->hidpp = hdev;
|
|
|
|
hid_set_drvdata(hdev, djrcv_dev);
|
|
out:
|
|
mutex_unlock(&dj_hdev_list_lock);
|
|
return djrcv_dev;
|
|
}
|
|
|
|
static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_workitem *workitem)
|
|
{
|
|
/* Called in delayed work context */
|
|
struct dj_device *dj_dev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
dj_dev = djrcv_dev->paired_dj_devices[workitem->device_index];
|
|
djrcv_dev->paired_dj_devices[workitem->device_index] = NULL;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
if (dj_dev != NULL) {
|
|
hid_destroy_device(dj_dev->hdev);
|
|
kfree(dj_dev);
|
|
} else {
|
|
hid_err(djrcv_dev->hidpp, "%s: can't destroy a NULL device\n",
|
|
__func__);
|
|
}
|
|
}
|
|
|
|
static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_workitem *workitem)
|
|
{
|
|
/* Called in delayed work context */
|
|
struct hid_device *djrcv_hdev = djrcv_dev->hidpp;
|
|
struct hid_device *dj_hiddev;
|
|
struct dj_device *dj_dev;
|
|
u8 device_index = workitem->device_index;
|
|
unsigned long flags;
|
|
|
|
/* Device index goes from 1 to 6, we need 3 bytes to store the
|
|
* semicolon, the index, and a null terminator
|
|
*/
|
|
unsigned char tmpstr[3];
|
|
|
|
/* We are the only one ever adding a device, no need to lock */
|
|
if (djrcv_dev->paired_dj_devices[device_index]) {
|
|
/* The device is already known. No need to reallocate it. */
|
|
dbg_hid("%s: device is already known\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dj_hiddev = hid_allocate_device();
|
|
if (IS_ERR(dj_hiddev)) {
|
|
hid_err(djrcv_hdev, "%s: hid_allocate_dev failed\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dj_hiddev->ll_driver = &logi_dj_ll_driver;
|
|
|
|
dj_hiddev->dev.parent = &djrcv_hdev->dev;
|
|
dj_hiddev->bus = BUS_USB;
|
|
dj_hiddev->vendor = djrcv_hdev->vendor;
|
|
dj_hiddev->product = (workitem->quad_id_msb << 8) |
|
|
workitem->quad_id_lsb;
|
|
if (workitem->device_type) {
|
|
const char *type_str = "Device";
|
|
|
|
switch (workitem->device_type) {
|
|
case 0x01: type_str = "Keyboard"; break;
|
|
case 0x02: type_str = "Mouse"; break;
|
|
case 0x03: type_str = "Numpad"; break;
|
|
case 0x04: type_str = "Presenter"; break;
|
|
case 0x07: type_str = "Remote Control"; break;
|
|
case 0x08: type_str = "Trackball"; break;
|
|
case 0x09: type_str = "Touchpad"; break;
|
|
}
|
|
snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
|
|
"Logitech Wireless %s PID:%04x",
|
|
type_str, dj_hiddev->product);
|
|
} else {
|
|
snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
|
|
"Logitech Unifying Device. Wireless PID:%04x",
|
|
dj_hiddev->product);
|
|
}
|
|
|
|
if (djrcv_dev->type == recvr_type_27mhz)
|
|
dj_hiddev->group = HID_GROUP_LOGITECH_27MHZ_DEVICE;
|
|
else
|
|
dj_hiddev->group = HID_GROUP_LOGITECH_DJ_DEVICE;
|
|
|
|
memcpy(dj_hiddev->phys, djrcv_hdev->phys, sizeof(djrcv_hdev->phys));
|
|
snprintf(tmpstr, sizeof(tmpstr), ":%d", device_index);
|
|
strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys));
|
|
|
|
dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL);
|
|
|
|
if (!dj_dev) {
|
|
hid_err(djrcv_hdev, "%s: failed allocating dj_dev\n", __func__);
|
|
goto dj_device_allocate_fail;
|
|
}
|
|
|
|
dj_dev->reports_supported = workitem->reports_supported;
|
|
dj_dev->hdev = dj_hiddev;
|
|
dj_dev->dj_receiver_dev = djrcv_dev;
|
|
dj_dev->device_index = device_index;
|
|
dj_hiddev->driver_data = dj_dev;
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
djrcv_dev->paired_dj_devices[device_index] = dj_dev;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
if (hid_add_device(dj_hiddev)) {
|
|
hid_err(djrcv_hdev, "%s: failed adding dj_device\n", __func__);
|
|
goto hid_add_device_fail;
|
|
}
|
|
|
|
return;
|
|
|
|
hid_add_device_fail:
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
djrcv_dev->paired_dj_devices[device_index] = NULL;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
kfree(dj_dev);
|
|
dj_device_allocate_fail:
|
|
hid_destroy_device(dj_hiddev);
|
|
}
|
|
|
|
static void delayedwork_callback(struct work_struct *work)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev =
|
|
container_of(work, struct dj_receiver_dev, work);
|
|
|
|
struct dj_workitem workitem;
|
|
unsigned long flags;
|
|
int count;
|
|
int retval;
|
|
|
|
dbg_hid("%s\n", __func__);
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
|
|
/*
|
|
* Since we attach to multiple interfaces, we may get scheduled before
|
|
* we are bound to the HID++ interface, catch this.
|
|
*/
|
|
if (!djrcv_dev->ready) {
|
|
pr_warn("%s: delayedwork queued before hidpp interface was enumerated\n",
|
|
__func__);
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
return;
|
|
}
|
|
|
|
count = kfifo_out(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem));
|
|
|
|
if (count != sizeof(workitem)) {
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (!kfifo_is_empty(&djrcv_dev->notif_fifo))
|
|
schedule_work(&djrcv_dev->work);
|
|
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
switch (workitem.type) {
|
|
case WORKITEM_TYPE_PAIRED:
|
|
logi_dj_recv_add_djhid_device(djrcv_dev, &workitem);
|
|
break;
|
|
case WORKITEM_TYPE_UNPAIRED:
|
|
logi_dj_recv_destroy_djhid_device(djrcv_dev, &workitem);
|
|
break;
|
|
case WORKITEM_TYPE_UNKNOWN:
|
|
retval = logi_dj_recv_query_paired_devices(djrcv_dev);
|
|
if (retval) {
|
|
hid_err(djrcv_dev->hidpp, "%s: logi_dj_recv_query_paired_devices error: %d\n",
|
|
__func__, retval);
|
|
}
|
|
break;
|
|
case WORKITEM_TYPE_EMPTY:
|
|
dbg_hid("%s: device list is empty\n", __func__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Sometimes we receive reports for which we do not have a paired dj_device
|
|
* associated with the device_index or report-type to forward the report to.
|
|
* This means that the original "device paired" notification corresponding
|
|
* to the dj_device never arrived to this driver. Possible reasons for this are:
|
|
* 1) hid-core discards all packets coming from a device during probe().
|
|
* 2) if the receiver is plugged into a KVM switch then the pairing reports
|
|
* are only forwarded to it if the focus is on this PC.
|
|
* This function deals with this by re-asking the receiver for the list of
|
|
* connected devices in the delayed work callback.
|
|
* This function MUST be called with djrcv->lock held.
|
|
*/
|
|
static void logi_dj_recv_queue_unknown_work(struct dj_receiver_dev *djrcv_dev)
|
|
{
|
|
struct dj_workitem workitem = { .type = WORKITEM_TYPE_UNKNOWN };
|
|
|
|
/* Rate limit queries done because of unhandeled reports to 2/sec */
|
|
if (time_before(jiffies, djrcv_dev->last_query + HZ / 2))
|
|
return;
|
|
|
|
kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem));
|
|
schedule_work(&djrcv_dev->work);
|
|
}
|
|
|
|
static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_report *dj_report)
|
|
{
|
|
/* We are called from atomic context (tasklet && djrcv->lock held) */
|
|
struct dj_workitem workitem = {
|
|
.device_index = dj_report->device_index,
|
|
};
|
|
|
|
switch (dj_report->report_type) {
|
|
case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
|
|
workitem.type = WORKITEM_TYPE_PAIRED;
|
|
if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] &
|
|
SPFUNCTION_DEVICE_LIST_EMPTY) {
|
|
workitem.type = WORKITEM_TYPE_EMPTY;
|
|
break;
|
|
}
|
|
/* fall-through */
|
|
case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
|
|
workitem.quad_id_msb =
|
|
dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB];
|
|
workitem.quad_id_lsb =
|
|
dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB];
|
|
workitem.reports_supported = get_unaligned_le32(
|
|
dj_report->report_params +
|
|
DEVICE_PAIRED_RF_REPORT_TYPE);
|
|
workitem.reports_supported |= HIDPP;
|
|
if (dj_report->report_type == REPORT_TYPE_NOTIF_DEVICE_UNPAIRED)
|
|
workitem.type = WORKITEM_TYPE_UNPAIRED;
|
|
break;
|
|
default:
|
|
logi_dj_recv_queue_unknown_work(djrcv_dev);
|
|
return;
|
|
}
|
|
|
|
kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem));
|
|
schedule_work(&djrcv_dev->work);
|
|
}
|
|
|
|
static void logi_hidpp_dev_conn_notif_equad(struct hid_device *hdev,
|
|
struct hidpp_event *hidpp_report,
|
|
struct dj_workitem *workitem)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
|
|
workitem->type = WORKITEM_TYPE_PAIRED;
|
|
workitem->device_type = hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] &
|
|
HIDPP_DEVICE_TYPE_MASK;
|
|
workitem->quad_id_msb = hidpp_report->params[HIDPP_PARAM_EQUAD_MSB];
|
|
workitem->quad_id_lsb = hidpp_report->params[HIDPP_PARAM_EQUAD_LSB];
|
|
switch (workitem->device_type) {
|
|
case REPORT_TYPE_KEYBOARD:
|
|
workitem->reports_supported |= STD_KEYBOARD | MULTIMEDIA |
|
|
POWER_KEYS | MEDIA_CENTER |
|
|
HIDPP;
|
|
break;
|
|
case REPORT_TYPE_MOUSE:
|
|
workitem->reports_supported |= STD_MOUSE | HIDPP;
|
|
if (djrcv_dev->type == recvr_type_mouse_only)
|
|
workitem->reports_supported |= MULTIMEDIA;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void logi_hidpp_dev_conn_notif_27mhz(struct hid_device *hdev,
|
|
struct hidpp_event *hidpp_report,
|
|
struct dj_workitem *workitem)
|
|
{
|
|
workitem->type = WORKITEM_TYPE_PAIRED;
|
|
workitem->quad_id_lsb = hidpp_report->params[HIDPP_PARAM_27MHZ_DEVID];
|
|
switch (hidpp_report->device_index) {
|
|
case 1: /* Index 1 is always a mouse */
|
|
case 2: /* Index 2 is always a mouse */
|
|
workitem->device_type = HIDPP_DEVICE_TYPE_MOUSE;
|
|
workitem->reports_supported |= STD_MOUSE | HIDPP;
|
|
break;
|
|
case 3: /* Index 3 is always the keyboard */
|
|
case 4: /* Index 4 is used for an optional separate numpad */
|
|
workitem->device_type = HIDPP_DEVICE_TYPE_KEYBOARD;
|
|
workitem->reports_supported |= STD_KEYBOARD | MULTIMEDIA |
|
|
POWER_KEYS | HIDPP;
|
|
break;
|
|
default:
|
|
hid_warn(hdev, "%s: unexpected device-index %d", __func__,
|
|
hidpp_report->device_index);
|
|
}
|
|
}
|
|
|
|
static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
|
|
struct hidpp_event *hidpp_report)
|
|
{
|
|
/* We are called from atomic context (tasklet && djrcv->lock held) */
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
const char *device_type = "UNKNOWN";
|
|
struct dj_workitem workitem = {
|
|
.type = WORKITEM_TYPE_EMPTY,
|
|
.device_index = hidpp_report->device_index,
|
|
};
|
|
|
|
switch (hidpp_report->params[HIDPP_PARAM_PROTO_TYPE]) {
|
|
case 0x01:
|
|
device_type = "Bluetooth";
|
|
/* Bluetooth connect packet contents is the same as (e)QUAD */
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
if (!(hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] &
|
|
HIDPP_MANUFACTURER_MASK)) {
|
|
hid_info(hdev, "Non Logitech device connected on slot %d\n",
|
|
hidpp_report->device_index);
|
|
workitem.reports_supported &= ~HIDPP;
|
|
}
|
|
break;
|
|
case 0x02:
|
|
device_type = "27 Mhz";
|
|
logi_hidpp_dev_conn_notif_27mhz(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x03:
|
|
device_type = "QUAD or eQUAD";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x04:
|
|
device_type = "eQUAD step 4 DJ";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x05:
|
|
device_type = "DFU Lite";
|
|
break;
|
|
case 0x06:
|
|
device_type = "eQUAD step 4 Lite";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x07:
|
|
device_type = "eQUAD step 4 Gaming";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x08:
|
|
device_type = "eQUAD step 4 for gamepads";
|
|
break;
|
|
case 0x0a:
|
|
device_type = "eQUAD nano Lite";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
break;
|
|
case 0x0c:
|
|
device_type = "eQUAD Lightspeed 1";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
workitem.reports_supported |= STD_KEYBOARD;
|
|
break;
|
|
case 0x0d:
|
|
device_type = "eQUAD Lightspeed 1_1";
|
|
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
|
|
workitem.reports_supported |= STD_KEYBOARD;
|
|
break;
|
|
}
|
|
|
|
/* custom receiver device (eg. powerplay) */
|
|
if (hidpp_report->device_index == 7) {
|
|
workitem.reports_supported |= HIDPP;
|
|
}
|
|
|
|
if (workitem.type == WORKITEM_TYPE_EMPTY) {
|
|
hid_warn(hdev,
|
|
"unusable device of type %s (0x%02x) connected on slot %d",
|
|
device_type,
|
|
hidpp_report->params[HIDPP_PARAM_PROTO_TYPE],
|
|
hidpp_report->device_index);
|
|
return;
|
|
}
|
|
|
|
hid_info(hdev, "device of type %s (0x%02x) connected on slot %d",
|
|
device_type, hidpp_report->params[HIDPP_PARAM_PROTO_TYPE],
|
|
hidpp_report->device_index);
|
|
|
|
kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem));
|
|
schedule_work(&djrcv_dev->work);
|
|
}
|
|
|
|
static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_report *dj_report)
|
|
{
|
|
/* We are called from atomic context (tasklet && djrcv->lock held) */
|
|
unsigned int i;
|
|
u8 reportbuffer[MAX_REPORT_SIZE];
|
|
struct dj_device *djdev;
|
|
|
|
djdev = djrcv_dev->paired_dj_devices[dj_report->device_index];
|
|
|
|
memset(reportbuffer, 0, sizeof(reportbuffer));
|
|
|
|
for (i = 0; i < NUMBER_OF_HID_REPORTS; i++) {
|
|
if (djdev->reports_supported & (1 << i)) {
|
|
reportbuffer[0] = i;
|
|
if (hid_input_report(djdev->hdev,
|
|
HID_INPUT_REPORT,
|
|
reportbuffer,
|
|
hid_reportid_size_map[i], 1)) {
|
|
dbg_hid("hid_input_report error sending null "
|
|
"report\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void logi_dj_recv_forward_dj(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_report *dj_report)
|
|
{
|
|
/* We are called from atomic context (tasklet && djrcv->lock held) */
|
|
struct dj_device *dj_device;
|
|
|
|
dj_device = djrcv_dev->paired_dj_devices[dj_report->device_index];
|
|
|
|
if ((dj_report->report_type > ARRAY_SIZE(hid_reportid_size_map) - 1) ||
|
|
(hid_reportid_size_map[dj_report->report_type] == 0)) {
|
|
dbg_hid("invalid report type:%x\n", dj_report->report_type);
|
|
return;
|
|
}
|
|
|
|
if (hid_input_report(dj_device->hdev,
|
|
HID_INPUT_REPORT, &dj_report->report_type,
|
|
hid_reportid_size_map[dj_report->report_type], 1)) {
|
|
dbg_hid("hid_input_report error\n");
|
|
}
|
|
}
|
|
|
|
static void logi_dj_recv_forward_report(struct dj_device *dj_dev, u8 *data,
|
|
int size)
|
|
{
|
|
/* We are called from atomic context (tasklet && djrcv->lock held) */
|
|
if (hid_input_report(dj_dev->hdev, HID_INPUT_REPORT, data, size, 1))
|
|
dbg_hid("hid_input_report error\n");
|
|
}
|
|
|
|
static void logi_dj_recv_forward_input_report(struct hid_device *hdev,
|
|
u8 *data, int size)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
struct dj_device *dj_dev;
|
|
unsigned long flags;
|
|
u8 report = data[0];
|
|
int i;
|
|
|
|
if (report > REPORT_TYPE_RFREPORT_LAST) {
|
|
hid_err(hdev, "Unexpected input report number %d\n", report);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) {
|
|
dj_dev = djrcv_dev->paired_dj_devices[i];
|
|
if (dj_dev && (dj_dev->reports_supported & BIT(report))) {
|
|
logi_dj_recv_forward_report(dj_dev, data, size);
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
return;
|
|
}
|
|
}
|
|
|
|
logi_dj_recv_queue_unknown_work(djrcv_dev);
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
dbg_hid("No dj-devs handling input report number %d\n", report);
|
|
}
|
|
|
|
static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
|
|
struct dj_report *dj_report)
|
|
{
|
|
struct hid_device *hdev = djrcv_dev->hidpp;
|
|
struct hid_report *report;
|
|
struct hid_report_enum *output_report_enum;
|
|
u8 *data = (u8 *)(&dj_report->device_index);
|
|
unsigned int i;
|
|
|
|
output_report_enum = &hdev->report_enum[HID_OUTPUT_REPORT];
|
|
report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
|
|
|
|
if (!report) {
|
|
hid_err(hdev, "%s: unable to find dj report\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < DJREPORT_SHORT_LENGTH - 1; i++)
|
|
report->field[0]->value[i] = data[i];
|
|
|
|
hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev *djrcv_dev)
|
|
{
|
|
static const u8 template[] = {
|
|
REPORT_ID_HIDPP_SHORT,
|
|
HIDPP_RECEIVER_INDEX,
|
|
HIDPP_SET_REGISTER,
|
|
HIDPP_REG_CONNECTION_STATE,
|
|
HIDPP_FAKE_DEVICE_ARRIVAL,
|
|
0x00, 0x00
|
|
};
|
|
u8 *hidpp_report;
|
|
int retval;
|
|
|
|
hidpp_report = kmemdup(template, sizeof(template), GFP_KERNEL);
|
|
if (!hidpp_report)
|
|
return -ENOMEM;
|
|
|
|
retval = hid_hw_raw_request(djrcv_dev->hidpp,
|
|
REPORT_ID_HIDPP_SHORT,
|
|
hidpp_report, sizeof(template),
|
|
HID_OUTPUT_REPORT,
|
|
HID_REQ_SET_REPORT);
|
|
|
|
kfree(hidpp_report);
|
|
return (retval < 0) ? retval : 0;
|
|
}
|
|
|
|
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
|
|
{
|
|
struct dj_report *dj_report;
|
|
int retval;
|
|
|
|
djrcv_dev->last_query = jiffies;
|
|
|
|
if (djrcv_dev->type != recvr_type_dj)
|
|
return logi_dj_recv_query_hidpp_devices(djrcv_dev);
|
|
|
|
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
|
|
if (!dj_report)
|
|
return -ENOMEM;
|
|
dj_report->report_id = REPORT_ID_DJ_SHORT;
|
|
dj_report->device_index = 0xFF;
|
|
dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
|
|
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
|
|
kfree(dj_report);
|
|
return retval;
|
|
}
|
|
|
|
|
|
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
|
|
unsigned timeout)
|
|
{
|
|
struct hid_device *hdev = djrcv_dev->hidpp;
|
|
struct dj_report *dj_report;
|
|
u8 *buf;
|
|
int retval = 0;
|
|
|
|
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
|
|
if (!dj_report)
|
|
return -ENOMEM;
|
|
|
|
if (djrcv_dev->type == recvr_type_dj) {
|
|
dj_report->report_id = REPORT_ID_DJ_SHORT;
|
|
dj_report->device_index = 0xFF;
|
|
dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
|
|
dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
|
|
dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] =
|
|
(u8)timeout;
|
|
|
|
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
|
|
|
|
/*
|
|
* Ugly sleep to work around a USB 3.0 bug when the receiver is
|
|
* still processing the "switch-to-dj" command while we send an
|
|
* other command.
|
|
* 50 msec should gives enough time to the receiver to be ready.
|
|
*/
|
|
msleep(50);
|
|
}
|
|
|
|
/*
|
|
* Magical bits to set up hidpp notifications when the dj devices
|
|
* are connected/disconnected.
|
|
*
|
|
* We can reuse dj_report because HIDPP_REPORT_SHORT_LENGTH is smaller
|
|
* than DJREPORT_SHORT_LENGTH.
|
|
*/
|
|
buf = (u8 *)dj_report;
|
|
|
|
memset(buf, 0, HIDPP_REPORT_SHORT_LENGTH);
|
|
|
|
buf[0] = REPORT_ID_HIDPP_SHORT;
|
|
buf[1] = 0xFF;
|
|
buf[2] = 0x80;
|
|
buf[3] = 0x00;
|
|
buf[4] = 0x00;
|
|
buf[5] = 0x09;
|
|
buf[6] = 0x00;
|
|
|
|
hid_hw_raw_request(hdev, REPORT_ID_HIDPP_SHORT, buf,
|
|
HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT,
|
|
HID_REQ_SET_REPORT);
|
|
|
|
kfree(dj_report);
|
|
return retval;
|
|
}
|
|
|
|
|
|
static int logi_dj_ll_open(struct hid_device *hid)
|
|
{
|
|
dbg_hid("%s: %s\n", __func__, hid->phys);
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void logi_dj_ll_close(struct hid_device *hid)
|
|
{
|
|
dbg_hid("%s: %s\n", __func__, hid->phys);
|
|
}
|
|
|
|
/*
|
|
* Register 0xB5 is "pairing information". It is solely intended for the
|
|
* receiver, so do not overwrite the device index.
|
|
*/
|
|
static u8 unifying_pairing_query[] = { REPORT_ID_HIDPP_SHORT,
|
|
HIDPP_RECEIVER_INDEX,
|
|
HIDPP_GET_LONG_REGISTER,
|
|
HIDPP_REG_PAIRING_INFORMATION };
|
|
static u8 unifying_pairing_answer[] = { REPORT_ID_HIDPP_LONG,
|
|
HIDPP_RECEIVER_INDEX,
|
|
HIDPP_GET_LONG_REGISTER,
|
|
HIDPP_REG_PAIRING_INFORMATION };
|
|
|
|
static int logi_dj_ll_raw_request(struct hid_device *hid,
|
|
unsigned char reportnum, __u8 *buf,
|
|
size_t count, unsigned char report_type,
|
|
int reqtype)
|
|
{
|
|
struct dj_device *djdev = hid->driver_data;
|
|
struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
|
|
u8 *out_buf;
|
|
int ret;
|
|
|
|
if ((buf[0] == REPORT_ID_HIDPP_SHORT) ||
|
|
(buf[0] == REPORT_ID_HIDPP_LONG) ||
|
|
(buf[0] == REPORT_ID_HIDPP_VERY_LONG)) {
|
|
if (count < 2)
|
|
return -EINVAL;
|
|
|
|
/* special case where we should not overwrite
|
|
* the device_index */
|
|
if (count == 7 && !memcmp(buf, unifying_pairing_query,
|
|
sizeof(unifying_pairing_query)))
|
|
buf[4] = (buf[4] & 0xf0) | (djdev->device_index - 1);
|
|
else
|
|
buf[1] = djdev->device_index;
|
|
return hid_hw_raw_request(djrcv_dev->hidpp, reportnum, buf,
|
|
count, report_type, reqtype);
|
|
}
|
|
|
|
if (buf[0] != REPORT_TYPE_LEDS)
|
|
return -EINVAL;
|
|
|
|
if (djrcv_dev->type != recvr_type_dj && count >= 2) {
|
|
if (!djrcv_dev->keyboard) {
|
|
hid_warn(hid, "Received REPORT_TYPE_LEDS request before the keyboard interface was enumerated\n");
|
|
return 0;
|
|
}
|
|
/* usbhid overrides the report ID and ignores the first byte */
|
|
return hid_hw_raw_request(djrcv_dev->keyboard, 0, buf, count,
|
|
report_type, reqtype);
|
|
}
|
|
|
|
out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
|
|
if (!out_buf)
|
|
return -ENOMEM;
|
|
|
|
if (count > DJREPORT_SHORT_LENGTH - 2)
|
|
count = DJREPORT_SHORT_LENGTH - 2;
|
|
|
|
out_buf[0] = REPORT_ID_DJ_SHORT;
|
|
out_buf[1] = djdev->device_index;
|
|
memcpy(out_buf + 2, buf, count);
|
|
|
|
ret = hid_hw_raw_request(djrcv_dev->hidpp, out_buf[0], out_buf,
|
|
DJREPORT_SHORT_LENGTH, report_type, reqtype);
|
|
|
|
kfree(out_buf);
|
|
return ret;
|
|
}
|
|
|
|
static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
|
|
{
|
|
memcpy(rdesc + *rsize, data, size);
|
|
*rsize += size;
|
|
}
|
|
|
|
static int logi_dj_ll_parse(struct hid_device *hid)
|
|
{
|
|
struct dj_device *djdev = hid->driver_data;
|
|
unsigned int rsize = 0;
|
|
char *rdesc;
|
|
int retval;
|
|
|
|
dbg_hid("%s\n", __func__);
|
|
|
|
djdev->hdev->version = 0x0111;
|
|
djdev->hdev->country = 0x00;
|
|
|
|
rdesc = kmalloc(MAX_RDESC_SIZE, GFP_KERNEL);
|
|
if (!rdesc)
|
|
return -ENOMEM;
|
|
|
|
if (djdev->reports_supported & STD_KEYBOARD) {
|
|
dbg_hid("%s: sending a kbd descriptor, reports_supported: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
rdcat(rdesc, &rsize, kbd_descriptor, sizeof(kbd_descriptor));
|
|
}
|
|
|
|
if (djdev->reports_supported & STD_MOUSE) {
|
|
dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
if (djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp ||
|
|
djdev->dj_receiver_dev->type == recvr_type_mouse_only)
|
|
rdcat(rdesc, &rsize, mse_high_res_descriptor,
|
|
sizeof(mse_high_res_descriptor));
|
|
else if (djdev->dj_receiver_dev->type == recvr_type_27mhz)
|
|
rdcat(rdesc, &rsize, mse_27mhz_descriptor,
|
|
sizeof(mse_27mhz_descriptor));
|
|
else if (djdev->dj_receiver_dev->type == recvr_type_bluetooth)
|
|
rdcat(rdesc, &rsize, mse_bluetooth_descriptor,
|
|
sizeof(mse_bluetooth_descriptor));
|
|
else
|
|
rdcat(rdesc, &rsize, mse_descriptor,
|
|
sizeof(mse_descriptor));
|
|
}
|
|
|
|
if (djdev->reports_supported & MULTIMEDIA) {
|
|
dbg_hid("%s: sending a multimedia report descriptor: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
rdcat(rdesc, &rsize, consumer_descriptor, sizeof(consumer_descriptor));
|
|
}
|
|
|
|
if (djdev->reports_supported & POWER_KEYS) {
|
|
dbg_hid("%s: sending a power keys report descriptor: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
rdcat(rdesc, &rsize, syscontrol_descriptor, sizeof(syscontrol_descriptor));
|
|
}
|
|
|
|
if (djdev->reports_supported & MEDIA_CENTER) {
|
|
dbg_hid("%s: sending a media center report descriptor: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
rdcat(rdesc, &rsize, media_descriptor, sizeof(media_descriptor));
|
|
}
|
|
|
|
if (djdev->reports_supported & KBD_LEDS) {
|
|
dbg_hid("%s: need to send kbd leds report descriptor: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
}
|
|
|
|
if (djdev->reports_supported & HIDPP) {
|
|
dbg_hid("%s: sending a HID++ descriptor, reports_supported: %llx\n",
|
|
__func__, djdev->reports_supported);
|
|
rdcat(rdesc, &rsize, hidpp_descriptor,
|
|
sizeof(hidpp_descriptor));
|
|
}
|
|
|
|
retval = hid_parse_report(hid, rdesc, rsize);
|
|
kfree(rdesc);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int logi_dj_ll_start(struct hid_device *hid)
|
|
{
|
|
dbg_hid("%s\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void logi_dj_ll_stop(struct hid_device *hid)
|
|
{
|
|
dbg_hid("%s\n", __func__);
|
|
}
|
|
|
|
|
|
static struct hid_ll_driver logi_dj_ll_driver = {
|
|
.parse = logi_dj_ll_parse,
|
|
.start = logi_dj_ll_start,
|
|
.stop = logi_dj_ll_stop,
|
|
.open = logi_dj_ll_open,
|
|
.close = logi_dj_ll_close,
|
|
.raw_request = logi_dj_ll_raw_request,
|
|
};
|
|
|
|
static int logi_dj_dj_event(struct hid_device *hdev,
|
|
struct hid_report *report, u8 *data,
|
|
int size)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
struct dj_report *dj_report = (struct dj_report *) data;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Here we receive all data coming from iface 2, there are 3 cases:
|
|
*
|
|
* 1) Data is intended for this driver i. e. data contains arrival,
|
|
* departure, etc notifications, in which case we queue them for delayed
|
|
* processing by the work queue. We return 1 to hid-core as no further
|
|
* processing is required from it.
|
|
*
|
|
* 2) Data informs a connection change, if the change means rf link
|
|
* loss, then we must send a null report to the upper layer to discard
|
|
* potentially pressed keys that may be repeated forever by the input
|
|
* layer. Return 1 to hid-core as no further processing is required.
|
|
*
|
|
* 3) Data is an actual input event from a paired DJ device in which
|
|
* case we forward it to the correct hid device (via hid_input_report()
|
|
* ) and return 1 so hid-core does not anything else with it.
|
|
*/
|
|
|
|
if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
|
|
(dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
|
|
/*
|
|
* Device index is wrong, bail out.
|
|
* This driver can ignore safely the receiver notifications,
|
|
* so ignore those reports too.
|
|
*/
|
|
if (dj_report->device_index != DJ_RECEIVER_INDEX)
|
|
hid_err(hdev, "%s: invalid device index:%d\n",
|
|
__func__, dj_report->device_index);
|
|
return false;
|
|
}
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
|
|
if (!djrcv_dev->paired_dj_devices[dj_report->device_index]) {
|
|
/* received an event for an unknown device, bail out */
|
|
logi_dj_recv_queue_notification(djrcv_dev, dj_report);
|
|
goto out;
|
|
}
|
|
|
|
switch (dj_report->report_type) {
|
|
case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
|
|
/* pairing notifications are handled above the switch */
|
|
break;
|
|
case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
|
|
logi_dj_recv_queue_notification(djrcv_dev, dj_report);
|
|
break;
|
|
case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
|
|
if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
|
|
STATUS_LINKLOSS) {
|
|
logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
|
|
}
|
|
break;
|
|
default:
|
|
logi_dj_recv_forward_dj(djrcv_dev, dj_report);
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int logi_dj_hidpp_event(struct hid_device *hdev,
|
|
struct hid_report *report, u8 *data,
|
|
int size)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
struct hidpp_event *hidpp_report = (struct hidpp_event *) data;
|
|
struct dj_device *dj_dev;
|
|
unsigned long flags;
|
|
u8 device_index = hidpp_report->device_index;
|
|
|
|
if (device_index == HIDPP_RECEIVER_INDEX) {
|
|
/* special case were the device wants to know its unifying
|
|
* name */
|
|
if (size == HIDPP_REPORT_LONG_LENGTH &&
|
|
!memcmp(data, unifying_pairing_answer,
|
|
sizeof(unifying_pairing_answer)))
|
|
device_index = (data[4] & 0x0F) + 1;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Data is from the HID++ collection, in this case, we forward the
|
|
* data to the corresponding child dj device and return 0 to hid-core
|
|
* so he data also goes to the hidraw device of the receiver. This
|
|
* allows a user space application to implement the full HID++ routing
|
|
* via the receiver.
|
|
*/
|
|
|
|
if ((device_index < DJ_DEVICE_INDEX_MIN) ||
|
|
(device_index > DJ_DEVICE_INDEX_MAX)) {
|
|
/*
|
|
* Device index is wrong, bail out.
|
|
* This driver can ignore safely the receiver notifications,
|
|
* so ignore those reports too.
|
|
*/
|
|
hid_err(hdev, "%s: invalid device index:%d\n", __func__,
|
|
hidpp_report->device_index);
|
|
return false;
|
|
}
|
|
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
|
|
dj_dev = djrcv_dev->paired_dj_devices[device_index];
|
|
|
|
/*
|
|
* With 27 MHz receivers, we do not get an explicit unpair event,
|
|
* remove the old device if the user has paired a *different* device.
|
|
*/
|
|
if (djrcv_dev->type == recvr_type_27mhz && dj_dev &&
|
|
hidpp_report->sub_id == REPORT_TYPE_NOTIF_DEVICE_CONNECTED &&
|
|
hidpp_report->params[HIDPP_PARAM_PROTO_TYPE] == 0x02 &&
|
|
hidpp_report->params[HIDPP_PARAM_27MHZ_DEVID] !=
|
|
dj_dev->hdev->product) {
|
|
struct dj_workitem workitem = {
|
|
.device_index = hidpp_report->device_index,
|
|
.type = WORKITEM_TYPE_UNPAIRED,
|
|
};
|
|
kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem));
|
|
/* logi_hidpp_recv_queue_notif will queue the work */
|
|
dj_dev = NULL;
|
|
}
|
|
|
|
if (dj_dev) {
|
|
logi_dj_recv_forward_report(dj_dev, data, size);
|
|
} else {
|
|
if (hidpp_report->sub_id == REPORT_TYPE_NOTIF_DEVICE_CONNECTED)
|
|
logi_hidpp_recv_queue_notif(hdev, hidpp_report);
|
|
else
|
|
logi_dj_recv_queue_unknown_work(djrcv_dev);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
return false;
|
|
}
|
|
|
|
static int logi_dj_raw_event(struct hid_device *hdev,
|
|
struct hid_report *report, u8 *data,
|
|
int size)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
dbg_hid("%s, size:%d\n", __func__, size);
|
|
|
|
if (!djrcv_dev)
|
|
return 0;
|
|
|
|
if (!hdev->report_enum[HID_INPUT_REPORT].numbered) {
|
|
|
|
if (djrcv_dev->unnumbered_application == HID_GD_KEYBOARD) {
|
|
/*
|
|
* For the keyboard, we can reuse the same report by
|
|
* using the second byte which is constant in the USB
|
|
* HID report descriptor.
|
|
*/
|
|
data[1] = data[0];
|
|
data[0] = REPORT_TYPE_KEYBOARD;
|
|
|
|
logi_dj_recv_forward_input_report(hdev, data, size);
|
|
|
|
/* restore previous state */
|
|
data[0] = data[1];
|
|
data[1] = 0;
|
|
}
|
|
/*
|
|
* Mouse-only receivers send unnumbered mouse data. The 27 MHz
|
|
* receiver uses 6 byte packets, the nano receiver 8 bytes.
|
|
*/
|
|
if (djrcv_dev->unnumbered_application == HID_GD_MOUSE &&
|
|
size <= 8) {
|
|
u8 mouse_report[9];
|
|
|
|
/* Prepend report id */
|
|
mouse_report[0] = REPORT_TYPE_MOUSE;
|
|
memcpy(mouse_report + 1, data, size);
|
|
logi_dj_recv_forward_input_report(hdev, mouse_report,
|
|
size + 1);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
switch (data[0]) {
|
|
case REPORT_ID_DJ_SHORT:
|
|
if (size != DJREPORT_SHORT_LENGTH) {
|
|
hid_err(hdev, "Short DJ report bad size (%d)", size);
|
|
return false;
|
|
}
|
|
return logi_dj_dj_event(hdev, report, data, size);
|
|
case REPORT_ID_DJ_LONG:
|
|
if (size != DJREPORT_LONG_LENGTH) {
|
|
hid_err(hdev, "Long DJ report bad size (%d)", size);
|
|
return false;
|
|
}
|
|
return logi_dj_dj_event(hdev, report, data, size);
|
|
case REPORT_ID_HIDPP_SHORT:
|
|
if (size != HIDPP_REPORT_SHORT_LENGTH) {
|
|
hid_err(hdev, "Short HID++ report bad size (%d)", size);
|
|
return false;
|
|
}
|
|
return logi_dj_hidpp_event(hdev, report, data, size);
|
|
case REPORT_ID_HIDPP_LONG:
|
|
if (size != HIDPP_REPORT_LONG_LENGTH) {
|
|
hid_err(hdev, "Long HID++ report bad size (%d)", size);
|
|
return false;
|
|
}
|
|
return logi_dj_hidpp_event(hdev, report, data, size);
|
|
}
|
|
|
|
logi_dj_recv_forward_input_report(hdev, data, size);
|
|
|
|
return false;
|
|
}
|
|
|
|
static int logi_dj_probe(struct hid_device *hdev,
|
|
const struct hid_device_id *id)
|
|
{
|
|
struct hid_report_enum *rep_enum;
|
|
struct hid_report *rep;
|
|
struct dj_receiver_dev *djrcv_dev;
|
|
struct usb_interface *intf;
|
|
unsigned int no_dj_interfaces = 0;
|
|
bool has_hidpp = false;
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
/*
|
|
* Call to usbhid to fetch the HID descriptors of the current
|
|
* interface subsequently call to the hid/hid-core to parse the
|
|
* fetched descriptors.
|
|
*/
|
|
retval = hid_parse(hdev);
|
|
if (retval) {
|
|
hid_err(hdev, "%s: parse failed\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Some KVMs add an extra interface for e.g. mouse emulation. If we
|
|
* treat these as logitech-dj interfaces then this causes input events
|
|
* reported through this extra interface to not be reported correctly.
|
|
* To avoid this, we treat these as generic-hid devices.
|
|
*/
|
|
switch (id->driver_data) {
|
|
case recvr_type_dj: no_dj_interfaces = 3; break;
|
|
case recvr_type_hidpp: no_dj_interfaces = 2; break;
|
|
case recvr_type_gaming_hidpp: no_dj_interfaces = 3; break;
|
|
case recvr_type_mouse_only: no_dj_interfaces = 2; break;
|
|
case recvr_type_27mhz: no_dj_interfaces = 2; break;
|
|
case recvr_type_bluetooth: no_dj_interfaces = 2; break;
|
|
}
|
|
if (hid_is_using_ll_driver(hdev, &usb_hid_driver)) {
|
|
intf = to_usb_interface(hdev->dev.parent);
|
|
if (intf && intf->altsetting->desc.bInterfaceNumber >=
|
|
no_dj_interfaces) {
|
|
hdev->quirks |= HID_QUIRK_INPUT_PER_APP;
|
|
return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
|
|
}
|
|
}
|
|
|
|
rep_enum = &hdev->report_enum[HID_INPUT_REPORT];
|
|
|
|
/* no input reports, bail out */
|
|
if (list_empty(&rep_enum->report_list))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Check for the HID++ application.
|
|
* Note: we should theoretically check for HID++ and DJ
|
|
* collections, but this will do.
|
|
*/
|
|
list_for_each_entry(rep, &rep_enum->report_list, list) {
|
|
if (rep->application == 0xff000001)
|
|
has_hidpp = true;
|
|
}
|
|
|
|
/*
|
|
* Ignore interfaces without DJ/HID++ collection, they will not carry
|
|
* any data, dont create any hid_device for them.
|
|
*/
|
|
if (!has_hidpp && id->driver_data == recvr_type_dj)
|
|
return -ENODEV;
|
|
|
|
/* get the current application attached to the node */
|
|
rep = list_first_entry(&rep_enum->report_list, struct hid_report, list);
|
|
djrcv_dev = dj_get_receiver_dev(hdev, id->driver_data,
|
|
rep->application, has_hidpp);
|
|
if (!djrcv_dev) {
|
|
hid_err(hdev, "%s: dj_get_receiver_dev failed\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (!rep_enum->numbered)
|
|
djrcv_dev->unnumbered_application = rep->application;
|
|
|
|
/* Starts the usb device and connects to upper interfaces hiddev and
|
|
* hidraw */
|
|
retval = hid_hw_start(hdev, HID_CONNECT_HIDRAW|HID_CONNECT_HIDDEV);
|
|
if (retval) {
|
|
hid_err(hdev, "%s: hid_hw_start returned error\n", __func__);
|
|
goto hid_hw_start_fail;
|
|
}
|
|
|
|
if (has_hidpp) {
|
|
retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
|
|
if (retval < 0) {
|
|
hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n",
|
|
__func__, retval);
|
|
goto switch_to_dj_mode_fail;
|
|
}
|
|
}
|
|
|
|
/* This is enabling the polling urb on the IN endpoint */
|
|
retval = hid_hw_open(hdev);
|
|
if (retval < 0) {
|
|
hid_err(hdev, "%s: hid_hw_open returned error:%d\n",
|
|
__func__, retval);
|
|
goto llopen_failed;
|
|
}
|
|
|
|
/* Allow incoming packets to arrive: */
|
|
hid_device_io_start(hdev);
|
|
|
|
if (has_hidpp) {
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
djrcv_dev->ready = true;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
retval = logi_dj_recv_query_paired_devices(djrcv_dev);
|
|
if (retval < 0) {
|
|
hid_err(hdev, "%s: logi_dj_recv_query_paired_devices error:%d\n",
|
|
__func__, retval);
|
|
/*
|
|
* This can happen with a KVM, let the probe succeed,
|
|
* logi_dj_recv_queue_unknown_work will retry later.
|
|
*/
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
llopen_failed:
|
|
switch_to_dj_mode_fail:
|
|
hid_hw_stop(hdev);
|
|
|
|
hid_hw_start_fail:
|
|
dj_put_receiver_dev(hdev);
|
|
return retval;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int logi_dj_reset_resume(struct hid_device *hdev)
|
|
{
|
|
int retval;
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
|
|
if (!djrcv_dev || djrcv_dev->hidpp != hdev)
|
|
return 0;
|
|
|
|
retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
|
|
if (retval < 0) {
|
|
hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n",
|
|
__func__, retval);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void logi_dj_remove(struct hid_device *hdev)
|
|
{
|
|
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
|
|
struct dj_device *dj_dev;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
dbg_hid("%s\n", __func__);
|
|
|
|
if (!djrcv_dev)
|
|
return hid_hw_stop(hdev);
|
|
|
|
/*
|
|
* This ensures that if the work gets requeued from another
|
|
* interface of the same receiver it will be a no-op.
|
|
*/
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
djrcv_dev->ready = false;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
|
|
cancel_work_sync(&djrcv_dev->work);
|
|
|
|
hid_hw_close(hdev);
|
|
hid_hw_stop(hdev);
|
|
|
|
/*
|
|
* For proper operation we need access to all interfaces, so we destroy
|
|
* the paired devices when we're unbound from any interface.
|
|
*
|
|
* Note we may still be bound to other interfaces, sharing the same
|
|
* djrcv_dev, so we need locking here.
|
|
*/
|
|
for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) {
|
|
spin_lock_irqsave(&djrcv_dev->lock, flags);
|
|
dj_dev = djrcv_dev->paired_dj_devices[i];
|
|
djrcv_dev->paired_dj_devices[i] = NULL;
|
|
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
|
|
if (dj_dev != NULL) {
|
|
hid_destroy_device(dj_dev->hdev);
|
|
kfree(dj_dev);
|
|
}
|
|
}
|
|
|
|
dj_put_receiver_dev(hdev);
|
|
}
|
|
|
|
static const struct hid_device_id logi_dj_receivers[] = {
|
|
{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER),
|
|
.driver_data = recvr_type_dj},
|
|
{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2),
|
|
.driver_data = recvr_type_dj},
|
|
{ /* Logitech Nano mouse only receiver */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER),
|
|
.driver_data = recvr_type_mouse_only},
|
|
{ /* Logitech Nano (non DJ) receiver */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2),
|
|
.driver_data = recvr_type_hidpp},
|
|
{ /* Logitech G700(s) receiver (0xc531) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
0xc531),
|
|
.driver_data = recvr_type_gaming_hidpp},
|
|
{ /* Logitech lightspeed receiver (0xc539) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1),
|
|
.driver_data = recvr_type_gaming_hidpp},
|
|
{ /* Logitech lightspeed receiver (0xc53f) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
|
|
.driver_data = recvr_type_gaming_hidpp},
|
|
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
|
|
.driver_data = recvr_type_27mhz},
|
|
{ /* Logitech powerplay receiver (0xc53a) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY),
|
|
.driver_data = recvr_type_gaming_hidpp},
|
|
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc517) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_S510_RECEIVER_2),
|
|
.driver_data = recvr_type_27mhz},
|
|
{ /* Logitech 27 MHz HID++ 1.0 mouse-only receiver (0xc51b) */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
USB_DEVICE_ID_LOGITECH_27MHZ_MOUSE_RECEIVER),
|
|
.driver_data = recvr_type_27mhz},
|
|
{ /* Logitech MX5000 HID++ / bluetooth receiver keyboard intf. */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
0xc70e),
|
|
.driver_data = recvr_type_bluetooth},
|
|
{ /* Logitech MX5000 HID++ / bluetooth receiver mouse intf. */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
0xc70a),
|
|
.driver_data = recvr_type_bluetooth},
|
|
{ /* Logitech MX5500 HID++ / bluetooth receiver keyboard intf. */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
0xc71b),
|
|
.driver_data = recvr_type_bluetooth},
|
|
{ /* Logitech MX5500 HID++ / bluetooth receiver mouse intf. */
|
|
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
|
|
0xc71c),
|
|
.driver_data = recvr_type_bluetooth},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(hid, logi_dj_receivers);
|
|
|
|
static struct hid_driver logi_djreceiver_driver = {
|
|
.name = "logitech-djreceiver",
|
|
.id_table = logi_dj_receivers,
|
|
.probe = logi_dj_probe,
|
|
.remove = logi_dj_remove,
|
|
.raw_event = logi_dj_raw_event,
|
|
#ifdef CONFIG_PM
|
|
.reset_resume = logi_dj_reset_resume,
|
|
#endif
|
|
};
|
|
|
|
module_hid_driver(logi_djreceiver_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Logitech");
|
|
MODULE_AUTHOR("Nestor Lopez Casado");
|
|
MODULE_AUTHOR("nlopezcasad@logitech.com");
|