mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
![Mingkai Hu](/assets/img/avatar_default.png)
P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
623 lines
14 KiB
Text
623 lines
14 KiB
Text
/*
|
|
* P2040 Silicon Device Tree Source
|
|
*
|
|
* Copyright 2011 Freescale Semiconductor Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Freescale Semiconductor nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
compatible = "fsl,P2040";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
aliases {
|
|
ccsr = &soc;
|
|
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
serial2 = &serial2;
|
|
serial3 = &serial3;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
pci2 = &pci2;
|
|
usb0 = &usb0;
|
|
usb1 = &usb1;
|
|
dma0 = &dma0;
|
|
dma1 = &dma1;
|
|
sdhc = &sdhc;
|
|
msi0 = &msi0;
|
|
msi1 = &msi1;
|
|
msi2 = &msi2;
|
|
|
|
crypto = &crypto;
|
|
sec_jr0 = &sec_jr0;
|
|
sec_jr1 = &sec_jr1;
|
|
sec_jr2 = &sec_jr2;
|
|
sec_jr3 = &sec_jr3;
|
|
rtic_a = &rtic_a;
|
|
rtic_b = &rtic_b;
|
|
rtic_c = &rtic_c;
|
|
rtic_d = &rtic_d;
|
|
sec_mon = &sec_mon;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: PowerPC,e500mc@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2_0>;
|
|
L2_0: l2-cache {
|
|
next-level-cache = <&cpc>;
|
|
};
|
|
};
|
|
cpu1: PowerPC,e500mc@1 {
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2_1>;
|
|
L2_1: l2-cache {
|
|
next-level-cache = <&cpc>;
|
|
};
|
|
};
|
|
cpu2: PowerPC,e500mc@2 {
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2_2>;
|
|
L2_2: l2-cache {
|
|
next-level-cache = <&cpc>;
|
|
};
|
|
};
|
|
cpu3: PowerPC,e500mc@3 {
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2_3>;
|
|
L2_3: l2-cache {
|
|
next-level-cache = <&cpc>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc: soc@ffe000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
|
reg = <0xf 0xfe000000 0 0x00001000>;
|
|
|
|
soc-sram-error {
|
|
compatible = "fsl,soc-sram-error";
|
|
interrupts = <16 2 1 29>;
|
|
};
|
|
|
|
corenet-law@0 {
|
|
compatible = "fsl,corenet-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <32>;
|
|
};
|
|
|
|
memory-controller@8000 {
|
|
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
|
reg = <0x8000 0x1000>;
|
|
interrupts = <16 2 1 23>;
|
|
};
|
|
|
|
cpc: l3-cache-controller@10000 {
|
|
compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
|
reg = <0x10000 0x1000>;
|
|
interrupts = <16 2 1 27>;
|
|
};
|
|
|
|
corenet-cf@18000 {
|
|
compatible = "fsl,corenet-cf";
|
|
reg = <0x18000 0x1000>;
|
|
interrupts = <16 2 1 31>;
|
|
fsl,ccf-num-csdids = <32>;
|
|
fsl,ccf-num-snoopids = <32>;
|
|
};
|
|
|
|
iommu@20000 {
|
|
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
|
reg = <0x20000 0x4000>;
|
|
interrupts = <
|
|
24 2 0 0
|
|
16 2 1 30>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
clock-frequency = <0>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <4>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "fsl,mpic", "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
msi0: msi@41600 {
|
|
compatible = "fsl,mpic-msi";
|
|
reg = <0x41600 0x200>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0 0 0
|
|
0xe1 0 0 0
|
|
0xe2 0 0 0
|
|
0xe3 0 0 0
|
|
0xe4 0 0 0
|
|
0xe5 0 0 0
|
|
0xe6 0 0 0
|
|
0xe7 0 0 0>;
|
|
};
|
|
|
|
msi1: msi@41800 {
|
|
compatible = "fsl,mpic-msi";
|
|
reg = <0x41800 0x200>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe8 0 0 0
|
|
0xe9 0 0 0
|
|
0xea 0 0 0
|
|
0xeb 0 0 0
|
|
0xec 0 0 0
|
|
0xed 0 0 0
|
|
0xee 0 0 0
|
|
0xef 0 0 0>;
|
|
};
|
|
|
|
msi2: msi@41a00 {
|
|
compatible = "fsl,mpic-msi";
|
|
reg = <0x41a00 0x200>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xf0 0 0 0
|
|
0xf1 0 0 0
|
|
0xf2 0 0 0
|
|
0xf3 0 0 0
|
|
0xf4 0 0 0
|
|
0xf5 0 0 0
|
|
0xf6 0 0 0
|
|
0xf7 0 0 0>;
|
|
};
|
|
|
|
guts: global-utilities@e0000 {
|
|
compatible = "fsl,qoriq-device-config-1.0";
|
|
reg = <0xe0000 0xe00>;
|
|
fsl,has-rstcr;
|
|
#sleep-cells = <1>;
|
|
fsl,liodn-bits = <12>;
|
|
};
|
|
|
|
pins: global-utilities@e0e00 {
|
|
compatible = "fsl,qoriq-pin-control-1.0";
|
|
reg = <0xe0e00 0x200>;
|
|
#sleep-cells = <2>;
|
|
};
|
|
|
|
clockgen: global-utilities@e1000 {
|
|
compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
|
|
reg = <0xe1000 0x1000>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
rcpm: global-utilities@e2000 {
|
|
compatible = "fsl,qoriq-rcpm-1.0";
|
|
reg = <0xe2000 0x1000>;
|
|
#sleep-cells = <1>;
|
|
};
|
|
|
|
sfp: sfp@e8000 {
|
|
compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
|
|
reg = <0xe8000 0x1000>;
|
|
};
|
|
|
|
serdes: serdes@ea000 {
|
|
compatible = "fsl,p2040-serdes";
|
|
reg = <0xea000 0x1000>;
|
|
};
|
|
|
|
dma0: dma@100300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
|
|
reg = <0x100300 0x4>;
|
|
ranges = <0x0 0x100100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupts = <28 2 0 0>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupts = <29 2 0 0>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupts = <30 2 0 0>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupts = <31 2 0 0>;
|
|
};
|
|
};
|
|
|
|
dma1: dma@101300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
|
|
reg = <0x101300 0x4>;
|
|
ranges = <0x0 0x101100 0x200>;
|
|
cell-index = <1>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupts = <32 2 0 0>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupts = <33 2 0 0>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupts = <34 2 0 0>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,p2040-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupts = <35 2 0 0>;
|
|
};
|
|
};
|
|
|
|
spi@110000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
|
|
reg = <0x110000 0x1000>;
|
|
interrupts = <53 0x2 0 0>;
|
|
fsl,espi-num-chipselects = <4>;
|
|
|
|
};
|
|
|
|
sdhc: sdhc@114000 {
|
|
compatible = "fsl,p2040-esdhc", "fsl,esdhc";
|
|
reg = <0x114000 0x1000>;
|
|
interrupts = <48 2 0 0>;
|
|
sdhci,auto-cmd12;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
|
|
i2c@118000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x118000 0x100>;
|
|
interrupts = <38 2 0 0>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@118100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x118100 0x100>;
|
|
interrupts = <38 2 0 0>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@119000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <2>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x119000 0x100>;
|
|
interrupts = <39 2 0 0>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@119100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <3>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x119100 0x100>;
|
|
interrupts = <39 2 0 0>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@11c500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x11c500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <36 2 0 0>;
|
|
};
|
|
|
|
serial1: serial@11c600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x11c600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <36 2 0 0>;
|
|
};
|
|
|
|
serial2: serial@11d500 {
|
|
cell-index = <2>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x11d500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <37 2 0 0>;
|
|
};
|
|
|
|
serial3: serial@11d600 {
|
|
cell-index = <3>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x11d600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <37 2 0 0>;
|
|
};
|
|
|
|
gpio0: gpio@130000 {
|
|
compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
|
|
reg = <0x130000 0x1000>;
|
|
interrupts = <55 2 0 0>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
|
|
usb0: usb@210000 {
|
|
compatible = "fsl,p2040-usb2-mph",
|
|
"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
|
reg = <0x210000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <44 0x2 0 0>;
|
|
port0;
|
|
};
|
|
|
|
usb1: usb@211000 {
|
|
compatible = "fsl,p2040-usb2-dr",
|
|
"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
|
reg = <0x211000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <45 0x2 0 0>;
|
|
};
|
|
|
|
sata@220000 {
|
|
compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
|
|
reg = <0x220000 0x1000>;
|
|
interrupts = <68 0x2 0 0>;
|
|
};
|
|
|
|
sata@221000 {
|
|
compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
|
|
reg = <0x221000 0x1000>;
|
|
interrupts = <69 0x2 0 0>;
|
|
};
|
|
|
|
crypto: crypto@300000 {
|
|
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x300000 0x10000>;
|
|
ranges = <0 0x300000 0x10000>;
|
|
interrupts = <92 2 0 0>;
|
|
|
|
sec_jr0: jr@1000 {
|
|
compatible = "fsl,sec-v4.2-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <88 2 0 0>;
|
|
};
|
|
|
|
sec_jr1: jr@2000 {
|
|
compatible = "fsl,sec-v4.2-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <89 2 0 0>;
|
|
};
|
|
|
|
sec_jr2: jr@3000 {
|
|
compatible = "fsl,sec-v4.2-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x3000 0x1000>;
|
|
interrupts = <90 2 0 0>;
|
|
};
|
|
|
|
sec_jr3: jr@4000 {
|
|
compatible = "fsl,sec-v4.2-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x4000 0x1000>;
|
|
interrupts = <91 2 0 0>;
|
|
};
|
|
|
|
rtic@6000 {
|
|
compatible = "fsl,sec-v4.2-rtic",
|
|
"fsl,sec-v4.0-rtic";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x6000 0x100>;
|
|
ranges = <0x0 0x6100 0xe00>;
|
|
|
|
rtic_a: rtic-a@0 {
|
|
compatible = "fsl,sec-v4.2-rtic-memory",
|
|
"fsl,sec-v4.0-rtic-memory";
|
|
reg = <0x00 0x20 0x100 0x80>;
|
|
};
|
|
|
|
rtic_b: rtic-b@20 {
|
|
compatible = "fsl,sec-v4.2-rtic-memory",
|
|
"fsl,sec-v4.0-rtic-memory";
|
|
reg = <0x20 0x20 0x200 0x80>;
|
|
};
|
|
|
|
rtic_c: rtic-c@40 {
|
|
compatible = "fsl,sec-v4.2-rtic-memory",
|
|
"fsl,sec-v4.0-rtic-memory";
|
|
reg = <0x40 0x20 0x300 0x80>;
|
|
};
|
|
|
|
rtic_d: rtic-d@60 {
|
|
compatible = "fsl,sec-v4.2-rtic-memory",
|
|
"fsl,sec-v4.0-rtic-memory";
|
|
reg = <0x60 0x20 0x500 0x80>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sec_mon: sec_mon@314000 {
|
|
compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
|
|
reg = <0x314000 0x1000>;
|
|
interrupts = <93 2 0 0>;
|
|
};
|
|
|
|
};
|
|
|
|
localbus@ffe124000 {
|
|
compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
|
|
interrupts = <25 2 0 0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
pci0: pcie@ffe200000 {
|
|
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
|
device_type = "pci";
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
bus-range = <0x0 0xff>;
|
|
clock-frequency = <0x1fca055>;
|
|
fsl,msi = <&msi0>;
|
|
interrupts = <16 2 1 15>;
|
|
pcie@0 {
|
|
reg = <0 0 0 0 0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
interrupts = <16 2 1 15>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 40 1 0 0
|
|
0000 0 0 2 &mpic 1 1 0 0
|
|
0000 0 0 3 &mpic 2 1 0 0
|
|
0000 0 0 4 &mpic 3 1 0 0
|
|
>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe201000 {
|
|
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
|
device_type = "pci";
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
bus-range = <0 0xff>;
|
|
clock-frequency = <0x1fca055>;
|
|
fsl,msi = <&msi1>;
|
|
interrupts = <16 2 1 14>;
|
|
pcie@0 {
|
|
reg = <0 0 0 0 0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
interrupts = <16 2 1 14>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 41 1 0 0
|
|
0000 0 0 2 &mpic 5 1 0 0
|
|
0000 0 0 3 &mpic 6 1 0 0
|
|
0000 0 0 4 &mpic 7 1 0 0
|
|
>;
|
|
};
|
|
};
|
|
|
|
pci2: pcie@ffe202000 {
|
|
compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
|
|
device_type = "pci";
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
bus-range = <0x0 0xff>;
|
|
clock-frequency = <0x1fca055>;
|
|
fsl,msi = <&msi2>;
|
|
interrupts = <16 2 1 13>;
|
|
pcie@0 {
|
|
reg = <0 0 0 0 0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
interrupts = <16 2 1 13>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 42 1 0 0
|
|
0000 0 0 2 &mpic 9 1 0 0
|
|
0000 0 0 3 &mpic 10 1 0 0
|
|
0000 0 0 4 &mpic 11 1 0 0
|
|
>;
|
|
};
|
|
};
|
|
};
|