mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
1192 lines
30 KiB
C
1192 lines
30 KiB
C
/*
|
|
* Support for IDE interfaces on Celleb platform
|
|
*
|
|
* (C) Copyright 2006 TOSHIBA CORPORATION
|
|
*
|
|
* This code is based on drivers/ata/ata_piix.c:
|
|
* Copyright 2003-2005 Red Hat Inc
|
|
* Copyright 2003-2005 Jeff Garzik
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
* and drivers/ata/ahci.c:
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
*
|
|
* and drivers/ata/libata-core.c:
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_scc"
|
|
#define DRV_VERSION "0.3"
|
|
|
|
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
|
|
|
|
/* PCI BARs */
|
|
#define SCC_CTRL_BAR 0
|
|
#define SCC_BMID_BAR 1
|
|
|
|
/* offset of CTRL registers */
|
|
#define SCC_CTL_PIOSHT 0x000
|
|
#define SCC_CTL_PIOCT 0x004
|
|
#define SCC_CTL_MDMACT 0x008
|
|
#define SCC_CTL_MCRCST 0x00C
|
|
#define SCC_CTL_SDMACT 0x010
|
|
#define SCC_CTL_SCRCST 0x014
|
|
#define SCC_CTL_UDENVT 0x018
|
|
#define SCC_CTL_TDVHSEL 0x020
|
|
#define SCC_CTL_MODEREG 0x024
|
|
#define SCC_CTL_ECMODE 0xF00
|
|
#define SCC_CTL_MAEA0 0xF50
|
|
#define SCC_CTL_MAEC0 0xF54
|
|
#define SCC_CTL_CCKCTRL 0xFF0
|
|
|
|
/* offset of BMID registers */
|
|
#define SCC_DMA_CMD 0x000
|
|
#define SCC_DMA_STATUS 0x004
|
|
#define SCC_DMA_TABLE_OFS 0x008
|
|
#define SCC_DMA_INTMASK 0x010
|
|
#define SCC_DMA_INTST 0x014
|
|
#define SCC_DMA_PTERADD 0x018
|
|
#define SCC_REG_CMD_ADDR 0x020
|
|
#define SCC_REG_DATA 0x000
|
|
#define SCC_REG_ERR 0x004
|
|
#define SCC_REG_FEATURE 0x004
|
|
#define SCC_REG_NSECT 0x008
|
|
#define SCC_REG_LBAL 0x00C
|
|
#define SCC_REG_LBAM 0x010
|
|
#define SCC_REG_LBAH 0x014
|
|
#define SCC_REG_DEVICE 0x018
|
|
#define SCC_REG_STATUS 0x01C
|
|
#define SCC_REG_CMD 0x01C
|
|
#define SCC_REG_ALTSTATUS 0x020
|
|
|
|
/* register value */
|
|
#define TDVHSEL_MASTER 0x00000001
|
|
#define TDVHSEL_SLAVE 0x00000004
|
|
|
|
#define MODE_JCUSFEN 0x00000080
|
|
|
|
#define ECMODE_VALUE 0x01
|
|
|
|
#define CCKCTRL_ATARESET 0x00040000
|
|
#define CCKCTRL_BUFCNT 0x00020000
|
|
#define CCKCTRL_CRST 0x00010000
|
|
#define CCKCTRL_OCLKEN 0x00000100
|
|
#define CCKCTRL_ATACLKOEN 0x00000002
|
|
#define CCKCTRL_LCLKEN 0x00000001
|
|
|
|
#define QCHCD_IOS_SS 0x00000001
|
|
|
|
#define QCHSD_STPDIAG 0x00020000
|
|
|
|
#define INTMASK_MSK 0xD1000012
|
|
#define INTSTS_SERROR 0x80000000
|
|
#define INTSTS_PRERR 0x40000000
|
|
#define INTSTS_RERR 0x10000000
|
|
#define INTSTS_ICERR 0x01000000
|
|
#define INTSTS_BMSINT 0x00000010
|
|
#define INTSTS_BMHE 0x00000008
|
|
#define INTSTS_IOIRQS 0x00000004
|
|
#define INTSTS_INTRQ 0x00000002
|
|
#define INTSTS_ACTEINT 0x00000001
|
|
|
|
|
|
/* PIO transfer mode table */
|
|
/* JCHST */
|
|
static const unsigned long JCHSTtbl[2][7] = {
|
|
{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHHT */
|
|
static const unsigned long JCHHTtbl[2][7] = {
|
|
{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHCT */
|
|
static const unsigned long JCHCTtbl[2][7] = {
|
|
{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
|
|
{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* DMA transfer mode table */
|
|
/* JCHDCTM/JCHDCTS */
|
|
static const unsigned long JCHDCTxtbl[2][7] = {
|
|
{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
|
|
{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCSTWTM/JCSTWTS */
|
|
static const unsigned long JCSTWTxtbl[2][7] = {
|
|
{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
|
|
{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCTSS */
|
|
static const unsigned long JCTSStbl[2][7] = {
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
|
|
};
|
|
|
|
/* JCENVT */
|
|
static const unsigned long JCENVTtbl[2][7] = {
|
|
{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCACTSELS/JCACTSELM */
|
|
static const unsigned long JCACTSELtbl[2][7] = {
|
|
{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
|
|
};
|
|
|
|
static const struct pci_device_id scc_pci_tbl[] = {
|
|
{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
/**
|
|
* scc_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set PIO mode for device.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
|
|
void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
|
|
unsigned long reg;
|
|
int offset;
|
|
|
|
reg = in_be32(cckctrl_port);
|
|
if (reg & CCKCTRL_ATACLKOEN)
|
|
offset = 1; /* 133MHz */
|
|
else
|
|
offset = 0; /* 100MHz */
|
|
|
|
reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
|
|
out_be32(piosht_port, reg);
|
|
reg = JCHCTtbl[offset][pio];
|
|
out_be32(pioct_port, reg);
|
|
}
|
|
|
|
/**
|
|
* scc_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
* @udma: udma mode, 0 - 6
|
|
*
|
|
* Set UDMA mode for device.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int udma = adev->dma_mode;
|
|
unsigned int is_slave = (adev->devno != 0);
|
|
u8 speed = udma;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
|
|
void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
|
|
void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
|
|
void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
|
|
void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
|
|
void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
|
|
int offset, idx;
|
|
|
|
if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
|
|
offset = 1; /* 133MHz */
|
|
else
|
|
offset = 0; /* 100MHz */
|
|
|
|
if (speed >= XFER_UDMA_0)
|
|
idx = speed - XFER_UDMA_0;
|
|
else
|
|
return;
|
|
|
|
if (is_slave) {
|
|
out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
|
|
out_be32(tdvhsel_port,
|
|
(in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
|
|
} else {
|
|
out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
|
|
out_be32(tdvhsel_port,
|
|
(in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
|
|
}
|
|
out_be32(udenvt_port,
|
|
JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
|
|
}
|
|
|
|
unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
|
|
{
|
|
/* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
|
|
if (adev->class == ATA_DEV_ATAPI &&
|
|
(mask & (0xE0 << ATA_SHIFT_UDMA))) {
|
|
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
|
|
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
|
|
}
|
|
return ata_pci_default_filter(adev, mask);
|
|
}
|
|
|
|
/**
|
|
* scc_tf_load - send taskfile registers to host controller
|
|
* @ap: Port to which output is sent
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Note: Original code is ata_tf_load().
|
|
*/
|
|
|
|
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
out_be32(ioaddr->ctl_addr, tf->ctl);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
out_be32(ioaddr->feature_addr, tf->hob_feature);
|
|
out_be32(ioaddr->nsect_addr, tf->hob_nsect);
|
|
out_be32(ioaddr->lbal_addr, tf->hob_lbal);
|
|
out_be32(ioaddr->lbam_addr, tf->hob_lbam);
|
|
out_be32(ioaddr->lbah_addr, tf->hob_lbah);
|
|
VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
|
|
tf->hob_feature,
|
|
tf->hob_nsect,
|
|
tf->hob_lbal,
|
|
tf->hob_lbam,
|
|
tf->hob_lbah);
|
|
}
|
|
|
|
if (is_addr) {
|
|
out_be32(ioaddr->feature_addr, tf->feature);
|
|
out_be32(ioaddr->nsect_addr, tf->nsect);
|
|
out_be32(ioaddr->lbal_addr, tf->lbal);
|
|
out_be32(ioaddr->lbam_addr, tf->lbam);
|
|
out_be32(ioaddr->lbah_addr, tf->lbah);
|
|
VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
|
|
tf->feature,
|
|
tf->nsect,
|
|
tf->lbal,
|
|
tf->lbam,
|
|
tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE) {
|
|
out_be32(ioaddr->device_addr, tf->device);
|
|
VPRINTK("device 0x%X\n", tf->device);
|
|
}
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_check_status - Read device status reg & clear interrupt
|
|
* @ap: port where the device is
|
|
*
|
|
* Note: Original code is ata_check_status().
|
|
*/
|
|
|
|
static u8 scc_check_status (struct ata_port *ap)
|
|
{
|
|
return in_be32(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
/**
|
|
* scc_tf_read - input device's ATA taskfile shadow registers
|
|
* @ap: Port from which input is read
|
|
* @tf: ATA taskfile register set for storing input
|
|
*
|
|
* Note: Original code is ata_tf_read().
|
|
*/
|
|
|
|
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
tf->command = scc_check_status(ap);
|
|
tf->feature = in_be32(ioaddr->error_addr);
|
|
tf->nsect = in_be32(ioaddr->nsect_addr);
|
|
tf->lbal = in_be32(ioaddr->lbal_addr);
|
|
tf->lbam = in_be32(ioaddr->lbam_addr);
|
|
tf->lbah = in_be32(ioaddr->lbah_addr);
|
|
tf->device = in_be32(ioaddr->device_addr);
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
|
|
tf->hob_feature = in_be32(ioaddr->error_addr);
|
|
tf->hob_nsect = in_be32(ioaddr->nsect_addr);
|
|
tf->hob_lbal = in_be32(ioaddr->lbal_addr);
|
|
tf->hob_lbam = in_be32(ioaddr->lbam_addr);
|
|
tf->hob_lbah = in_be32(ioaddr->lbah_addr);
|
|
out_be32(ioaddr->ctl_addr, tf->ctl);
|
|
ap->last_ctl = tf->ctl;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* scc_exec_command - issue ATA command to host controller
|
|
* @ap: port to which command is being issued
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Note: Original code is ata_exec_command().
|
|
*/
|
|
|
|
static void scc_exec_command (struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
|
|
|
|
out_be32(ap->ioaddr.command_addr, tf->command);
|
|
ata_pause(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_check_altstatus - Read device alternate status reg
|
|
* @ap: port where the device is
|
|
*/
|
|
|
|
static u8 scc_check_altstatus (struct ata_port *ap)
|
|
{
|
|
return in_be32(ap->ioaddr.altstatus_addr);
|
|
}
|
|
|
|
/**
|
|
* scc_std_dev_select - Select device 0/1 on ATA bus
|
|
* @ap: ATA channel to manipulate
|
|
* @device: ATA device (numbered from zero) to select
|
|
*
|
|
* Note: Original code is ata_std_dev_select().
|
|
*/
|
|
|
|
static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
|
|
{
|
|
u8 tmp;
|
|
|
|
if (device == 0)
|
|
tmp = ATA_DEVICE_OBS;
|
|
else
|
|
tmp = ATA_DEVICE_OBS | ATA_DEV1;
|
|
|
|
out_be32(ap->ioaddr.device_addr, tmp);
|
|
ata_pause(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_setup - Set up PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_bmdma_setup().
|
|
*/
|
|
|
|
static void scc_bmdma_setup (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
u8 dmactl;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* load PRD table addr */
|
|
out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = in_be32(mmio + SCC_DMA_CMD);
|
|
dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
|
|
if (!rw)
|
|
dmactl |= ATA_DMA_WR;
|
|
out_be32(mmio + SCC_DMA_CMD, dmactl);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_start - Start a PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_bmdma_start().
|
|
*/
|
|
|
|
static void scc_bmdma_start (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
u8 dmactl;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = in_be32(mmio + SCC_DMA_CMD);
|
|
out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
|
|
}
|
|
|
|
/**
|
|
* scc_devchk - PATA device presence detection
|
|
* @ap: ATA channel to examine
|
|
* @device: Device to examine (starting at zero)
|
|
*
|
|
* Note: Original code is ata_devchk().
|
|
*/
|
|
|
|
static unsigned int scc_devchk (struct ata_port *ap,
|
|
unsigned int device)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 nsect, lbal;
|
|
|
|
ap->ops->dev_select(ap, device);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0x55);
|
|
out_be32(ioaddr->lbal_addr, 0xaa);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0xaa);
|
|
out_be32(ioaddr->lbal_addr, 0x55);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0x55);
|
|
out_be32(ioaddr->lbal_addr, 0xaa);
|
|
|
|
nsect = in_be32(ioaddr->nsect_addr);
|
|
lbal = in_be32(ioaddr->lbal_addr);
|
|
|
|
if ((nsect == 0x55) && (lbal == 0xaa))
|
|
return 1; /* we found a device */
|
|
|
|
return 0; /* nothing found */
|
|
}
|
|
|
|
/**
|
|
* scc_bus_post_reset - PATA device post reset
|
|
*
|
|
* Note: Original code is ata_bus_post_reset().
|
|
*/
|
|
|
|
static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int dev0 = devmask & (1 << 0);
|
|
unsigned int dev1 = devmask & (1 << 1);
|
|
int rc;
|
|
|
|
/* if device 0 was found in ata_devchk, wait for its
|
|
* BSY bit to clear
|
|
*/
|
|
if (dev0) {
|
|
rc = ata_wait_ready(ap, deadline);
|
|
if (rc && rc != -ENODEV)
|
|
return rc;
|
|
}
|
|
|
|
/* if device 1 was found in ata_devchk, wait for
|
|
* register access, then wait for BSY to clear
|
|
*/
|
|
while (dev1) {
|
|
u8 nsect, lbal;
|
|
|
|
ap->ops->dev_select(ap, 1);
|
|
nsect = in_be32(ioaddr->nsect_addr);
|
|
lbal = in_be32(ioaddr->lbal_addr);
|
|
if ((nsect == 1) && (lbal == 1))
|
|
break;
|
|
if (time_after(jiffies, deadline))
|
|
return -EBUSY;
|
|
msleep(50); /* give drive a breather */
|
|
}
|
|
if (dev1) {
|
|
rc = ata_wait_ready(ap, deadline);
|
|
if (rc && rc != -ENODEV)
|
|
return rc;
|
|
}
|
|
|
|
/* is all this really necessary? */
|
|
ap->ops->dev_select(ap, 0);
|
|
if (dev1)
|
|
ap->ops->dev_select(ap, 1);
|
|
if (dev0)
|
|
ap->ops->dev_select(ap, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_bus_softreset - PATA device software reset
|
|
*
|
|
* Note: Original code is ata_bus_softreset().
|
|
*/
|
|
|
|
static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
|
|
|
|
/* software reset. causes dev0 to be selected */
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
udelay(20);
|
|
out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
|
|
udelay(20);
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
|
|
/* wait a while before checking status */
|
|
ata_wait_after_reset(ap, deadline);
|
|
|
|
/* Before we perform post reset processing we want to see if
|
|
* the bus shows 0xFF because the odd clown forgets the D7
|
|
* pulldown resistor.
|
|
*/
|
|
if (scc_check_status(ap) == 0xFF)
|
|
return 0;
|
|
|
|
scc_bus_post_reset(ap, devmask, deadline);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_std_softreset - reset host port via ATA SRST
|
|
* @ap: port to reset
|
|
* @classes: resulting classes of attached devices
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Note: Original code is ata_std_softreset().
|
|
*/
|
|
|
|
static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
|
|
unsigned int devmask = 0, err_mask;
|
|
u8 err;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (ata_link_offline(link)) {
|
|
classes[0] = ATA_DEV_NONE;
|
|
goto out;
|
|
}
|
|
|
|
/* determine if device 0/1 are present */
|
|
if (scc_devchk(ap, 0))
|
|
devmask |= (1 << 0);
|
|
if (slave_possible && scc_devchk(ap, 1))
|
|
devmask |= (1 << 1);
|
|
|
|
/* select device 0 again */
|
|
ap->ops->dev_select(ap, 0);
|
|
|
|
/* issue bus reset */
|
|
DPRINTK("about to softreset, devmask=%x\n", devmask);
|
|
err_mask = scc_bus_softreset(ap, devmask, deadline);
|
|
if (err_mask) {
|
|
ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
|
|
err_mask);
|
|
return -EIO;
|
|
}
|
|
|
|
/* determine by signature whether we have ATA or ATAPI devices */
|
|
classes[0] = ata_dev_try_classify(&ap->link.device[0],
|
|
devmask & (1 << 0), &err);
|
|
if (slave_possible && err != 0x81)
|
|
classes[1] = ata_dev_try_classify(&ap->link.device[1],
|
|
devmask & (1 << 1), &err);
|
|
|
|
out:
|
|
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_stop - Stop PCI IDE BMDMA transfer
|
|
* @qc: Command we are ending DMA for
|
|
*/
|
|
|
|
static void scc_bmdma_stop (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
|
|
u32 reg;
|
|
|
|
while (1) {
|
|
reg = in_be32(bmid_base + SCC_DMA_INTST);
|
|
|
|
if (reg & INTSTS_SERROR) {
|
|
printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_PRERR) {
|
|
u32 maea0, maec0;
|
|
maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
|
|
maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
|
|
printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_RERR) {
|
|
printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ICERR) {
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMSINT) {
|
|
unsigned int classes;
|
|
unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
|
|
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
|
|
/* TBD: SW reset */
|
|
scc_std_softreset(&ap->link, &classes, deadline);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMHE) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ACTEINT) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_IOIRQS) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* clear start/stop bit */
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
|
|
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
|
ata_altstatus(ap); /* dummy read */
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_status - Read PCI IDE BMDMA status
|
|
* @ap: Port associated with this ATA transaction.
|
|
*/
|
|
|
|
static u8 scc_bmdma_status (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
|
|
u32 int_status = in_be32(mmio + SCC_DMA_INTST);
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
static int retry = 0;
|
|
|
|
/* return if IOS_SS is cleared */
|
|
if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
|
|
return host_stat;
|
|
|
|
/* errata A252,A308 workaround: Step4 */
|
|
if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
|
|
return (host_stat | ATA_DMA_INTR);
|
|
|
|
/* errata A308 workaround Step5 */
|
|
if (int_status & INTSTS_IOIRQS) {
|
|
host_stat |= ATA_DMA_INTR;
|
|
|
|
/* We don't check ATAPI DMA because it is limited to UDMA4 */
|
|
if ((qc->tf.protocol == ATA_PROT_DMA &&
|
|
qc->dev->xfer_mode > XFER_UDMA_4)) {
|
|
if (!(int_status & INTSTS_ACTEINT)) {
|
|
printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
|
|
ap->print_id);
|
|
host_stat |= ATA_DMA_ERR;
|
|
if (retry++)
|
|
ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
|
|
} else
|
|
retry = 0;
|
|
}
|
|
}
|
|
|
|
return host_stat;
|
|
}
|
|
|
|
/**
|
|
* scc_data_xfer - Transfer data by PIO
|
|
* @dev: device for this I/O
|
|
* @buf: data buffer
|
|
* @buflen: buffer length
|
|
* @rw: read/write
|
|
*
|
|
* Note: Original code is ata_data_xfer().
|
|
*/
|
|
|
|
static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
|
|
unsigned int buflen, int rw)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int words = buflen >> 1;
|
|
unsigned int i;
|
|
u16 *buf16 = (u16 *) buf;
|
|
void __iomem *mmio = ap->ioaddr.data_addr;
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
for (i = 0; i < words; i++)
|
|
buf16[i] = le16_to_cpu(in_be32(mmio));
|
|
else
|
|
for (i = 0; i < words; i++)
|
|
out_be32(mmio, cpu_to_le16(buf16[i]));
|
|
|
|
/* Transfer trailing 1 byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
u16 align_buf[1] = { 0 };
|
|
unsigned char *trailing_buf = buf + buflen - 1;
|
|
|
|
if (rw == READ) {
|
|
align_buf[0] = le16_to_cpu(in_be32(mmio));
|
|
memcpy(trailing_buf, align_buf, 1);
|
|
} else {
|
|
memcpy(align_buf, trailing_buf, 1);
|
|
out_be32(mmio, cpu_to_le16(align_buf[0]));
|
|
}
|
|
words++;
|
|
}
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
/**
|
|
* scc_irq_on - Enable interrupts on a port.
|
|
* @ap: Port on which interrupts are enabled.
|
|
*
|
|
* Note: Original code is ata_irq_on().
|
|
*/
|
|
|
|
static u8 scc_irq_on (struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 tmp;
|
|
|
|
ap->ctl &= ~ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
tmp = ata_wait_idle(ap);
|
|
|
|
ap->ops->irq_clear(ap);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_freeze - Freeze BMDMA controller port
|
|
* @ap: port to freeze
|
|
*
|
|
* Note: Original code is ata_bmdma_freeze().
|
|
*/
|
|
|
|
static void scc_bmdma_freeze (struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ap->ctl |= ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
|
|
/* Under certain circumstances, some controllers raise IRQ on
|
|
* ATA_NIEN manipulation. Also, many controllers fail to mask
|
|
* previously pending IRQ on ATA_NIEN assertion. Clear it.
|
|
*/
|
|
ata_chk_status(ap);
|
|
|
|
ap->ops->irq_clear(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_pata_prereset - prepare for reset
|
|
* @ap: ATA port to be reset
|
|
* @deadline: deadline jiffies for the operation
|
|
*/
|
|
|
|
static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
link->ap->cbl = ATA_CBL_PATA80;
|
|
return ata_std_prereset(link, deadline);
|
|
}
|
|
|
|
/**
|
|
* scc_std_postreset - standard postreset callback
|
|
* @ap: the target ata_port
|
|
* @classes: classes of attached devices
|
|
*
|
|
* Note: Original code is ata_std_postreset().
|
|
*/
|
|
|
|
static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* is double-select really necessary? */
|
|
if (classes[0] != ATA_DEV_NONE)
|
|
ap->ops->dev_select(ap, 1);
|
|
if (classes[1] != ATA_DEV_NONE)
|
|
ap->ops->dev_select(ap, 0);
|
|
|
|
/* bail out if no device is present */
|
|
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
|
|
DPRINTK("EXIT, no device\n");
|
|
return;
|
|
}
|
|
|
|
/* set up device control */
|
|
if (ap->ioaddr.ctl_addr)
|
|
out_be32(ap->ioaddr.ctl_addr, ap->ctl);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
/**
|
|
* scc_error_handler - Stock error handler for BMDMA controller
|
|
* @ap: port to handle error for
|
|
*/
|
|
|
|
static void scc_error_handler (struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
|
|
scc_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
|
|
* @ap: Port associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_bmdma_irq_clear().
|
|
*/
|
|
|
|
static void scc_bmdma_irq_clear (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
if (!mmio)
|
|
return;
|
|
|
|
out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
|
|
}
|
|
|
|
/**
|
|
* scc_port_start - Set port up for dma.
|
|
* @ap: Port to initialize
|
|
*
|
|
* Allocate space for PRD table using ata_port_start().
|
|
* Set PRD table address for PTERADD. (PRD Transfer End Read)
|
|
*/
|
|
|
|
static int scc_port_start (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_port_stop - Undo scc_port_start()
|
|
* @ap: Port to shut down
|
|
*
|
|
* Reset PTERADD.
|
|
*/
|
|
|
|
static void scc_port_stop (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
out_be32(mmio + SCC_DMA_PTERADD, 0);
|
|
}
|
|
|
|
static struct scsi_host_template scc_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static const struct ata_port_operations scc_pata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.set_piomode = scc_set_piomode,
|
|
.set_dmamode = scc_set_dmamode,
|
|
.mode_filter = scc_mode_filter,
|
|
|
|
.tf_load = scc_tf_load,
|
|
.tf_read = scc_tf_read,
|
|
.exec_command = scc_exec_command,
|
|
.check_status = scc_check_status,
|
|
.check_altstatus = scc_check_altstatus,
|
|
.dev_select = scc_std_dev_select,
|
|
|
|
.bmdma_setup = scc_bmdma_setup,
|
|
.bmdma_start = scc_bmdma_start,
|
|
.bmdma_stop = scc_bmdma_stop,
|
|
.bmdma_status = scc_bmdma_status,
|
|
.data_xfer = scc_data_xfer,
|
|
|
|
.freeze = scc_bmdma_freeze,
|
|
.error_handler = scc_error_handler,
|
|
.post_internal_cmd = scc_bmdma_stop,
|
|
|
|
.irq_clear = scc_bmdma_irq_clear,
|
|
.irq_on = scc_irq_on,
|
|
|
|
.port_start = scc_port_start,
|
|
.port_stop = scc_port_stop,
|
|
};
|
|
|
|
static struct ata_port_info scc_port_info[] = {
|
|
{
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x00,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &scc_pata_ops,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* scc_reset_controller - initialize SCC PATA controller.
|
|
*/
|
|
|
|
static int scc_reset_controller(struct ata_host *host)
|
|
{
|
|
void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
|
|
void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
|
|
void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
|
|
void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
|
|
u32 reg = 0;
|
|
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_ATACLKOEN;
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_CRST;
|
|
out_be32(cckctrl_port, reg);
|
|
|
|
for (;;) {
|
|
reg = in_be32(cckctrl_port);
|
|
if (reg & CCKCTRL_CRST)
|
|
break;
|
|
udelay(5000);
|
|
}
|
|
|
|
reg |= CCKCTRL_ATARESET;
|
|
out_be32(cckctrl_port, reg);
|
|
out_be32(ecmode_port, ECMODE_VALUE);
|
|
out_be32(mode_port, MODE_JCUSFEN);
|
|
out_be32(intmask_port, INTMASK_MSK);
|
|
|
|
if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
|
|
printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
|
|
* @ioaddr: IO address structure to be initialized
|
|
* @base: base address of BMID region
|
|
*/
|
|
|
|
static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
|
|
{
|
|
ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
|
|
ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
|
|
ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
|
|
ioaddr->bmdma_addr = base;
|
|
ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
|
|
ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
|
|
ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
|
|
ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
|
|
ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
|
|
ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
|
|
ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
|
|
ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
|
|
ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
|
|
ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
|
|
}
|
|
|
|
static int scc_host_init(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
int rc;
|
|
|
|
rc = scc_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_init_one - Register SCC PATA device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in scc_pci_tbl matching with @pdev
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
|
|
struct ata_host *host;
|
|
int rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
|
|
ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
|
|
|
|
rc = scc_host_init(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
|
|
&scc_sht);
|
|
}
|
|
|
|
static struct pci_driver scc_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = scc_pci_tbl,
|
|
.probe = scc_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init scc_init (void)
|
|
{
|
|
int rc;
|
|
|
|
DPRINTK("pci_register_driver\n");
|
|
rc = pci_register_driver(&scc_pci_driver);
|
|
if (rc)
|
|
return rc;
|
|
|
|
DPRINTK("done\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit scc_exit (void)
|
|
{
|
|
pci_unregister_driver(&scc_pci_driver);
|
|
}
|
|
|
|
module_init(scc_init);
|
|
module_exit(scc_exit);
|
|
|
|
MODULE_AUTHOR("Toshiba corp");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|