mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
891 lines
22 KiB
C
891 lines
22 KiB
C
/*
|
|
* libata-sff.c - helper library for PCI IDE BMDMA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2006 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2006 Jeff Garzik
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available from http://www.t13.org/ and
|
|
* http://www.sata-io.org/
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/libata.h>
|
|
|
|
#include "libata.h"
|
|
|
|
/**
|
|
* ata_irq_on - Enable interrupts on a port.
|
|
* @ap: Port on which interrupts are enabled.
|
|
*
|
|
* Enable interrupts on a legacy IDE device using MMIO or PIO,
|
|
* wait for idle, clear any pending interrupts.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
u8 ata_irq_on(struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 tmp;
|
|
|
|
ap->ctl &= ~ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
iowrite8(ap->ctl, ioaddr->ctl_addr);
|
|
tmp = ata_wait_idle(ap);
|
|
|
|
ap->ops->irq_clear(ap);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
/**
|
|
* ata_tf_load - send taskfile registers to host controller
|
|
* @ap: Port to which output is sent
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Outputs ATA taskfile to standard ATA host controller.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
|
|
void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
iowrite8(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
iowrite8(tf->hob_feature, ioaddr->feature_addr);
|
|
iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
|
|
iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
|
|
iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
|
|
iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
|
|
VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
|
|
tf->hob_feature,
|
|
tf->hob_nsect,
|
|
tf->hob_lbal,
|
|
tf->hob_lbam,
|
|
tf->hob_lbah);
|
|
}
|
|
|
|
if (is_addr) {
|
|
iowrite8(tf->feature, ioaddr->feature_addr);
|
|
iowrite8(tf->nsect, ioaddr->nsect_addr);
|
|
iowrite8(tf->lbal, ioaddr->lbal_addr);
|
|
iowrite8(tf->lbam, ioaddr->lbam_addr);
|
|
iowrite8(tf->lbah, ioaddr->lbah_addr);
|
|
VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
|
|
tf->feature,
|
|
tf->nsect,
|
|
tf->lbal,
|
|
tf->lbam,
|
|
tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE) {
|
|
iowrite8(tf->device, ioaddr->device_addr);
|
|
VPRINTK("device 0x%X\n", tf->device);
|
|
}
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
/**
|
|
* ata_exec_command - issue ATA command to host controller
|
|
* @ap: port to which command is being issued
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Issues ATA command, with proper synchronization with interrupt
|
|
* handler / other threads.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
|
|
|
|
iowrite8(tf->command, ap->ioaddr.command_addr);
|
|
ata_pause(ap);
|
|
}
|
|
|
|
/**
|
|
* ata_tf_read - input device's ATA taskfile shadow registers
|
|
* @ap: Port from which input is read
|
|
* @tf: ATA taskfile register set for storing input
|
|
*
|
|
* Reads ATA taskfile registers for currently-selected device
|
|
* into @tf.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
tf->command = ata_check_status(ap);
|
|
tf->feature = ioread8(ioaddr->error_addr);
|
|
tf->nsect = ioread8(ioaddr->nsect_addr);
|
|
tf->lbal = ioread8(ioaddr->lbal_addr);
|
|
tf->lbam = ioread8(ioaddr->lbam_addr);
|
|
tf->lbah = ioread8(ioaddr->lbah_addr);
|
|
tf->device = ioread8(ioaddr->device_addr);
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
|
|
tf->hob_feature = ioread8(ioaddr->error_addr);
|
|
tf->hob_nsect = ioread8(ioaddr->nsect_addr);
|
|
tf->hob_lbal = ioread8(ioaddr->lbal_addr);
|
|
tf->hob_lbam = ioread8(ioaddr->lbam_addr);
|
|
tf->hob_lbah = ioread8(ioaddr->lbah_addr);
|
|
iowrite8(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_check_status - Read device status reg & clear interrupt
|
|
* @ap: port where the device is
|
|
*
|
|
* Reads ATA taskfile status register for currently-selected device
|
|
* and return its value. This also clears pending interrupts
|
|
* from this device
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
u8 ata_check_status(struct ata_port *ap)
|
|
{
|
|
return ioread8(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
/**
|
|
* ata_altstatus - Read device alternate status reg
|
|
* @ap: port where the device is
|
|
*
|
|
* Reads ATA taskfile alternate status register for
|
|
* currently-selected device and return its value.
|
|
*
|
|
* Note: may NOT be used as the check_altstatus() entry in
|
|
* ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
u8 ata_altstatus(struct ata_port *ap)
|
|
{
|
|
if (ap->ops->check_altstatus)
|
|
return ap->ops->check_altstatus(ap);
|
|
|
|
return ioread8(ap->ioaddr.altstatus_addr);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
u8 dmactl;
|
|
|
|
/* load PRD table addr. */
|
|
mb(); /* make sure PRD table writes are visible to controller */
|
|
iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
|
|
if (!rw)
|
|
dmactl |= ATA_DMA_WR;
|
|
iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_start - Start a PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_bmdma_start (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
u8 dmactl;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
|
|
/* Strictly, one may wish to issue an ioread8() here, to
|
|
* flush the mmio write. However, control also passes
|
|
* to the hardware at this point, and it will interrupt
|
|
* us when we are to resume control. So, in effect,
|
|
* we don't care when the mmio write flushes.
|
|
* Further, a read of the DMA status register _immediately_
|
|
* following the write may not be what certain flaky hardware
|
|
* is expected, so I think it is best to not add a readb()
|
|
* without first all the MMIO ATA cards/mobos.
|
|
* Or maybe I'm just being paranoid.
|
|
*
|
|
* FIXME: The posting of this write means I/O starts are
|
|
* unneccessarily delayed for MMIO
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
|
|
* @ap: Port associated with this ATA transaction.
|
|
*
|
|
* Clear interrupt and error flags in DMA status register.
|
|
*
|
|
* May be used as the irq_clear() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_bmdma_irq_clear(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
if (!mmio)
|
|
return;
|
|
|
|
iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_status - Read PCI IDE BMDMA status
|
|
* @ap: Port associated with this ATA transaction.
|
|
*
|
|
* Read and return BMDMA status register.
|
|
*
|
|
* May be used as the bmdma_status() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
u8 ata_bmdma_status(struct ata_port *ap)
|
|
{
|
|
return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_stop - Stop PCI IDE BMDMA transfer
|
|
* @qc: Command we are ending DMA for
|
|
*
|
|
* Clears the ATA_DMA_START flag in the dma control register
|
|
*
|
|
* May be used as the bmdma_stop() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
void ata_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* clear start/stop bit */
|
|
iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
|
|
mmio + ATA_DMA_CMD);
|
|
|
|
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
|
ata_altstatus(ap); /* dummy read */
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_freeze - Freeze BMDMA controller port
|
|
* @ap: port to freeze
|
|
*
|
|
* Freeze BMDMA controller port.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
void ata_bmdma_freeze(struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ap->ctl |= ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
iowrite8(ap->ctl, ioaddr->ctl_addr);
|
|
|
|
/* Under certain circumstances, some controllers raise IRQ on
|
|
* ATA_NIEN manipulation. Also, many controllers fail to mask
|
|
* previously pending IRQ on ATA_NIEN assertion. Clear it.
|
|
*/
|
|
ata_chk_status(ap);
|
|
|
|
ap->ops->irq_clear(ap);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_thaw - Thaw BMDMA controller port
|
|
* @ap: port to thaw
|
|
*
|
|
* Thaw BMDMA controller port.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
void ata_bmdma_thaw(struct ata_port *ap)
|
|
{
|
|
/* clear & re-enable interrupts */
|
|
ata_chk_status(ap);
|
|
ap->ops->irq_clear(ap);
|
|
ap->ops->irq_on(ap);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
|
|
* @ap: port to handle error for
|
|
* @prereset: prereset method (can be NULL)
|
|
* @softreset: softreset method (can be NULL)
|
|
* @hardreset: hardreset method (can be NULL)
|
|
* @postreset: postreset method (can be NULL)
|
|
*
|
|
* Handle error for ATA BMDMA controller. It can handle both
|
|
* PATA and SATA controllers. Many controllers should be able to
|
|
* use this EH as-is or with some added handling before and
|
|
* after.
|
|
*
|
|
* This function is intended to be used for constructing
|
|
* ->error_handler callback by low level drivers.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*/
|
|
void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
|
|
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
|
|
ata_postreset_fn_t postreset)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
unsigned long flags;
|
|
int thaw = 0;
|
|
|
|
qc = __ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
|
|
qc = NULL;
|
|
|
|
/* reset PIO HSM and stop DMA engine */
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
|
|
ap->hsm_task_state = HSM_ST_IDLE;
|
|
|
|
if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
|
|
qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
|
|
u8 host_stat;
|
|
|
|
host_stat = ap->ops->bmdma_status(ap);
|
|
|
|
/* BMDMA controllers indicate host bus error by
|
|
* setting DMA_ERR bit and timing out. As it wasn't
|
|
* really a timeout event, adjust error mask and
|
|
* cancel frozen state.
|
|
*/
|
|
if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
|
|
qc->err_mask = AC_ERR_HOST_BUS;
|
|
thaw = 1;
|
|
}
|
|
|
|
ap->ops->bmdma_stop(qc);
|
|
}
|
|
|
|
ata_altstatus(ap);
|
|
ata_chk_status(ap);
|
|
ap->ops->irq_clear(ap);
|
|
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
if (thaw)
|
|
ata_eh_thaw_port(ap);
|
|
|
|
/* PIO and DMA engines have been stopped, perform recovery */
|
|
ata_do_eh(ap, prereset, softreset, hardreset, postreset);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_error_handler - Stock error handler for BMDMA controller
|
|
* @ap: port to handle error for
|
|
*
|
|
* Stock error handler for BMDMA controller.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*/
|
|
void ata_bmdma_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_reset_fn_t hardreset;
|
|
|
|
hardreset = NULL;
|
|
if (sata_scr_valid(&ap->link))
|
|
hardreset = sata_std_hardreset;
|
|
|
|
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
|
|
* BMDMA controller
|
|
* @qc: internal command to clean up
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*/
|
|
void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->ap->ioaddr.bmdma_addr)
|
|
ata_bmdma_stop(qc);
|
|
}
|
|
|
|
/**
|
|
* ata_sff_port_start - Set port up for dma.
|
|
* @ap: Port to initialize
|
|
*
|
|
* Called just after data structures for each port are
|
|
* initialized. Allocates space for PRD table if the device
|
|
* is DMA capable SFF.
|
|
*
|
|
* May be used as the port_start() entry in ata_port_operations.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from caller.
|
|
*/
|
|
|
|
int ata_sff_port_start(struct ata_port *ap)
|
|
{
|
|
if (ap->ioaddr.bmdma_addr)
|
|
return ata_port_start(ap);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
static int ata_resources_present(struct pci_dev *pdev, int port)
|
|
{
|
|
int i;
|
|
|
|
/* Check the PCI resources for this channel are enabled */
|
|
port = port * 2;
|
|
for (i = 0; i < 2; i ++) {
|
|
if (pci_resource_start(pdev, port + i) == 0 ||
|
|
pci_resource_len(pdev, port + i) == 0)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
|
|
* @host: target ATA host
|
|
*
|
|
* Acquire PCI BMDMA resources and initialize @host accordingly.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_pci_init_bmdma(struct ata_host *host)
|
|
{
|
|
struct device *gdev = host->dev;
|
|
struct pci_dev *pdev = to_pci_dev(gdev);
|
|
int i, rc;
|
|
|
|
/* No BAR4 allocation: No DMA */
|
|
if (pci_resource_start(pdev, 4) == 0)
|
|
return 0;
|
|
|
|
/* TODO: If we get no DMA mask we should fall back to PIO */
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* request and iomap DMA region */
|
|
rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
|
|
return -ENOMEM;
|
|
}
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
void __iomem *bmdma = host->iomap[4] + 8 * i;
|
|
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
ap->ioaddr.bmdma_addr = bmdma;
|
|
if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
|
|
(ioread8(bmdma + 2) & 0x80))
|
|
host->flags |= ATA_HOST_SIMPLEX;
|
|
|
|
ata_port_desc(ap, "bmdma 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_pci_init_sff_host - acquire native PCI ATA resources and init host
|
|
* @host: target ATA host
|
|
*
|
|
* Acquire native PCI ATA resources for @host and initialize the
|
|
* first two ports of @host accordingly. Ports marked dummy are
|
|
* skipped and allocation failure makes the port dummy.
|
|
*
|
|
* Note that native PCI resources are valid even for legacy hosts
|
|
* as we fix up pdev resources array early in boot, so this
|
|
* function can be used for both native and legacy SFF hosts.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 if at least one port is initialized, -ENODEV if no port is
|
|
* available.
|
|
*/
|
|
int ata_pci_init_sff_host(struct ata_host *host)
|
|
{
|
|
struct device *gdev = host->dev;
|
|
struct pci_dev *pdev = to_pci_dev(gdev);
|
|
unsigned int mask = 0;
|
|
int i, rc;
|
|
|
|
/* request, iomap BARs and init port addresses accordingly */
|
|
for (i = 0; i < 2; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
int base = i * 2;
|
|
void __iomem * const *iomap;
|
|
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
/* Discard disabled ports. Some controllers show
|
|
* their unused channels this way. Disabled ports are
|
|
* made dummy.
|
|
*/
|
|
if (!ata_resources_present(pdev, i)) {
|
|
ap->ops = &ata_dummy_port_ops;
|
|
continue;
|
|
}
|
|
|
|
rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
|
|
if (rc) {
|
|
dev_printk(KERN_WARNING, gdev,
|
|
"failed to request/iomap BARs for port %d "
|
|
"(errno=%d)\n", i, rc);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
ap->ops = &ata_dummy_port_ops;
|
|
continue;
|
|
}
|
|
host->iomap = iomap = pcim_iomap_table(pdev);
|
|
|
|
ap->ioaddr.cmd_addr = iomap[base];
|
|
ap->ioaddr.altstatus_addr =
|
|
ap->ioaddr.ctl_addr = (void __iomem *)
|
|
((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
|
|
ata_std_ports(&ap->ioaddr);
|
|
|
|
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, base),
|
|
(unsigned long long)pci_resource_start(pdev, base + 1));
|
|
|
|
mask |= 1 << i;
|
|
}
|
|
|
|
if (!mask) {
|
|
dev_printk(KERN_ERR, gdev, "no available native port\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
|
|
* @pdev: target PCI device
|
|
* @ppi: array of port_info, must be enough for two ports
|
|
* @r_host: out argument for the initialized ATA host
|
|
*
|
|
* Helper to allocate ATA host for @pdev, acquire all native PCI
|
|
* resources and initialize it accordingly in one go.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from calling layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
int ata_pci_prepare_sff_host(struct pci_dev *pdev,
|
|
const struct ata_port_info * const * ppi,
|
|
struct ata_host **r_host)
|
|
{
|
|
struct ata_host *host;
|
|
int rc;
|
|
|
|
if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
|
|
if (!host) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"failed to allocate ATA host\n");
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = ata_pci_init_sff_host(host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
/* init DMA related stuff */
|
|
rc = ata_pci_init_bmdma(host);
|
|
if (rc)
|
|
goto err_bmdma;
|
|
|
|
devres_remove_group(&pdev->dev, NULL);
|
|
*r_host = host;
|
|
return 0;
|
|
|
|
err_bmdma:
|
|
/* This is necessary because PCI and iomap resources are
|
|
* merged and releasing the top group won't release the
|
|
* acquired resources if some of those have been acquired
|
|
* before entering this function.
|
|
*/
|
|
pcim_iounmap_regions(pdev, 0xf);
|
|
err_out:
|
|
devres_release_group(&pdev->dev, NULL);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_pci_init_one - Initialize/register PCI IDE host controller
|
|
* @pdev: Controller to be initialized
|
|
* @ppi: array of port_info, must be enough for two ports
|
|
*
|
|
* This is a helper function which can be called from a driver's
|
|
* xxx_init_one() probe function if the hardware uses traditional
|
|
* IDE taskfile registers.
|
|
*
|
|
* This function calls pci_enable_device(), reserves its register
|
|
* regions, sets the dma mask, enables bus master mode, and calls
|
|
* ata_device_add()
|
|
*
|
|
* ASSUMPTION:
|
|
* Nobody makes a single channel controller that appears solely as
|
|
* the secondary legacy port on PCI.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, negative on errno-based value on error.
|
|
*/
|
|
int ata_pci_init_one(struct pci_dev *pdev,
|
|
const struct ata_port_info * const * ppi)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct ata_port_info *pi = NULL;
|
|
struct ata_host *host = NULL;
|
|
u8 mask;
|
|
int legacy_mode = 0;
|
|
int i, rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* look up the first valid port_info */
|
|
for (i = 0; i < 2 && ppi[i]; i++) {
|
|
if (ppi[i]->port_ops != &ata_dummy_port_ops) {
|
|
pi = ppi[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!pi) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"no valid port_info specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!devres_open_group(dev, NULL, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
/* FIXME: Really for ATA it isn't safe because the device may be
|
|
multi-purpose and we want to leave it alone if it was already
|
|
enabled. Secondly for shared use as Arjan says we want refcounting
|
|
|
|
Checking dev->is_enabled is insufficient as this is not set at
|
|
boot for the primary video which is BIOS enabled
|
|
*/
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
|
|
u8 tmp8;
|
|
|
|
/* TODO: What if one channel is in native mode ... */
|
|
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
|
|
mask = (1 << 2) | (1 << 0);
|
|
if ((tmp8 & mask) != mask)
|
|
legacy_mode = 1;
|
|
#if defined(CONFIG_NO_ATA_LEGACY)
|
|
/* Some platforms with PCI limits cannot address compat
|
|
port space. In that case we punt if their firmware has
|
|
left a device in compatibility mode */
|
|
if (legacy_mode) {
|
|
printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
|
|
rc = -EOPNOTSUPP;
|
|
goto err_out;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* prepare host */
|
|
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* start host and request IRQ */
|
|
rc = ata_host_start(host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
if (!legacy_mode) {
|
|
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
|
|
IRQF_SHARED, DRV_NAME, host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
ata_port_desc(host->ports[0], "irq %d", pdev->irq);
|
|
ata_port_desc(host->ports[1], "irq %d", pdev->irq);
|
|
} else {
|
|
if (!ata_port_is_dummy(host->ports[0])) {
|
|
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
|
|
pi->port_ops->irq_handler,
|
|
IRQF_SHARED, DRV_NAME, host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
ata_port_desc(host->ports[0], "irq %d",
|
|
ATA_PRIMARY_IRQ(pdev));
|
|
}
|
|
|
|
if (!ata_port_is_dummy(host->ports[1])) {
|
|
rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
|
|
pi->port_ops->irq_handler,
|
|
IRQF_SHARED, DRV_NAME, host);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
ata_port_desc(host->ports[1], "irq %d",
|
|
ATA_SECONDARY_IRQ(pdev));
|
|
}
|
|
}
|
|
|
|
/* register */
|
|
rc = ata_host_register(host, pi->sht);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
devres_remove_group(dev, NULL);
|
|
return 0;
|
|
|
|
err_out:
|
|
devres_release_group(dev, NULL);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_pci_clear_simplex - attempt to kick device out of simplex
|
|
* @pdev: PCI device
|
|
*
|
|
* Some PCI ATA devices report simplex mode but in fact can be told to
|
|
* enter non simplex mode. This implements the neccessary logic to
|
|
* perform the task on such devices. Calling it on other devices will
|
|
* have -undefined- behaviour.
|
|
*/
|
|
|
|
int ata_pci_clear_simplex(struct pci_dev *pdev)
|
|
{
|
|
unsigned long bmdma = pci_resource_start(pdev, 4);
|
|
u8 simplex;
|
|
|
|
if (bmdma == 0)
|
|
return -ENOENT;
|
|
|
|
simplex = inb(bmdma + 0x02);
|
|
outb(simplex & 0x60, bmdma + 0x02);
|
|
simplex = inb(bmdma + 0x02);
|
|
if (simplex & 0x80)
|
|
return -EOPNOTSUPP;
|
|
return 0;
|
|
}
|
|
|
|
unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
|
|
{
|
|
/* Filter out DMA modes if the device has been configured by
|
|
the BIOS as PIO only */
|
|
|
|
if (adev->link->ap->ioaddr.bmdma_addr == 0)
|
|
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
|
|
return xfer_mask;
|
|
}
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|