mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Alan Cox](/assets/img/avatar_default.png)
This avoids allocating DMA buffers if not needed but at the moment is mostly just a neatness item. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
220 lines
5.5 KiB
C
220 lines
5.5 KiB
C
/*
|
|
* pata_cypress.c - Cypress PATA for new ATA layer
|
|
* (C) 2006 Red Hat Inc
|
|
* Alan Cox <alan@redhat.com>
|
|
*
|
|
* Based heavily on
|
|
* linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_cypress"
|
|
#define DRV_VERSION "0.1.5"
|
|
|
|
/* here are the offset definitions for the registers */
|
|
|
|
enum {
|
|
CY82_IDE_CMDREG = 0x04,
|
|
CY82_IDE_ADDRSETUP = 0x48,
|
|
CY82_IDE_MASTER_IOR = 0x4C,
|
|
CY82_IDE_MASTER_IOW = 0x4D,
|
|
CY82_IDE_SLAVE_IOR = 0x4E,
|
|
CY82_IDE_SLAVE_IOW = 0x4F,
|
|
CY82_IDE_MASTER_8BIT = 0x50,
|
|
CY82_IDE_SLAVE_8BIT = 0x51,
|
|
|
|
CY82_INDEX_PORT = 0x22,
|
|
CY82_DATA_PORT = 0x23,
|
|
|
|
CY82_INDEX_CTRLREG1 = 0x01,
|
|
CY82_INDEX_CHANNEL0 = 0x30,
|
|
CY82_INDEX_CHANNEL1 = 0x31,
|
|
CY82_INDEX_TIMEOUT = 0x32
|
|
};
|
|
|
|
/**
|
|
* cy82c693_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup.
|
|
*/
|
|
|
|
static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_timing t;
|
|
const unsigned long T = 1000000 / 33;
|
|
short time_16, time_8;
|
|
u32 addr;
|
|
|
|
if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
|
|
printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
|
|
return;
|
|
}
|
|
|
|
time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
|
|
time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
|
|
|
|
if (adev->devno == 0) {
|
|
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
|
|
|
|
addr &= ~0x0F; /* Mask bits */
|
|
addr |= FIT(t.setup, 0, 15);
|
|
|
|
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
|
|
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
|
|
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
|
|
pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
|
|
} else {
|
|
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
|
|
|
|
addr &= ~0xF0; /* Mask bits */
|
|
addr |= (FIT(t.setup, 0, 15) << 4);
|
|
|
|
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
|
|
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
|
|
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16);
|
|
pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cy82c693_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the DMA mode setup.
|
|
*/
|
|
|
|
static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
|
|
|
|
/* Be afraid, be very afraid. Magic registers in low I/O space */
|
|
outb(reg, 0x22);
|
|
outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);
|
|
|
|
/* 0x50 gives the best behaviour on the Alpha's using this chip */
|
|
outb(CY82_INDEX_TIMEOUT, 0x22);
|
|
outb(0x50, 0x23);
|
|
}
|
|
|
|
static struct scsi_host_template cy82c693_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations cy82c693_port_ops = {
|
|
.set_piomode = cy82c693_set_piomode,
|
|
.set_dmamode = cy82c693_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_sff_port_start,
|
|
};
|
|
|
|
static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.sht = &cy82c693_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.port_ops = &cy82c693_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
|
|
|
|
/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2.
|
|
For the moment we don't handle the secondary. FIXME */
|
|
|
|
if (PCI_FUNC(pdev->devfn) != 1)
|
|
return -ENODEV;
|
|
|
|
return ata_pci_init_one(pdev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id cy82c693[] = {
|
|
{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cy82c693_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cy82c693,
|
|
.probe = cy82c693_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init cy82c693_init(void)
|
|
{
|
|
return pci_register_driver(&cy82c693_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit cy82c693_exit(void)
|
|
{
|
|
pci_unregister_driver(&cy82c693_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cy82c693);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(cy82c693_init);
|
|
module_exit(cy82c693_exit);
|