mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
778 lines
19 KiB
C
778 lines
19 KiB
C
/*
|
|
* sata_inic162x.c - Driver for Initio 162x SATA controllers
|
|
*
|
|
* Copyright 2006 SUSE Linux Products GmbH
|
|
* Copyright 2006 Tejun Heo <teheo@novell.com>
|
|
*
|
|
* This file is released under GPL v2.
|
|
*
|
|
* This controller is eccentric and easily locks up if something isn't
|
|
* right. Documentation is available at initio's website but it only
|
|
* documents registers (not programming model).
|
|
*
|
|
* - ATA disks work.
|
|
* - Hotplug works.
|
|
* - ATAPI read works but burning doesn't. This thing is really
|
|
* peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
|
|
* ATAPI DMA WRITE should be programmed. If you've got a clue, be
|
|
* my guest.
|
|
* - Both STR and STD work.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/blkdev.h>
|
|
#include <scsi/scsi_device.h>
|
|
|
|
#define DRV_NAME "sata_inic162x"
|
|
#define DRV_VERSION "0.3"
|
|
|
|
enum {
|
|
MMIO_BAR = 5,
|
|
|
|
NR_PORTS = 2,
|
|
|
|
HOST_CTL = 0x7c,
|
|
HOST_STAT = 0x7e,
|
|
HOST_IRQ_STAT = 0xbc,
|
|
HOST_IRQ_MASK = 0xbe,
|
|
|
|
PORT_SIZE = 0x40,
|
|
|
|
/* registers for ATA TF operation */
|
|
PORT_TF = 0x00,
|
|
PORT_ALT_STAT = 0x08,
|
|
PORT_IRQ_STAT = 0x09,
|
|
PORT_IRQ_MASK = 0x0a,
|
|
PORT_PRD_CTL = 0x0b,
|
|
PORT_PRD_ADDR = 0x0c,
|
|
PORT_PRD_XFERLEN = 0x10,
|
|
|
|
/* IDMA register */
|
|
PORT_IDMA_CTL = 0x14,
|
|
|
|
PORT_SCR = 0x20,
|
|
|
|
/* HOST_CTL bits */
|
|
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
|
|
HCTL_PWRDWN = (1 << 13), /* power down PHYs */
|
|
HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */
|
|
HCTL_RPGSEL = (1 << 15), /* register page select */
|
|
|
|
HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
|
|
HCTL_RPGSEL,
|
|
|
|
/* HOST_IRQ_(STAT|MASK) bits */
|
|
HIRQ_PORT0 = (1 << 0),
|
|
HIRQ_PORT1 = (1 << 1),
|
|
HIRQ_SOFT = (1 << 14),
|
|
HIRQ_GLOBAL = (1 << 15), /* STAT only */
|
|
|
|
/* PORT_IRQ_(STAT|MASK) bits */
|
|
PIRQ_OFFLINE = (1 << 0), /* device unplugged */
|
|
PIRQ_ONLINE = (1 << 1), /* device plugged */
|
|
PIRQ_COMPLETE = (1 << 2), /* completion interrupt */
|
|
PIRQ_FATAL = (1 << 3), /* fatal error */
|
|
PIRQ_ATA = (1 << 4), /* ATA interrupt */
|
|
PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */
|
|
PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */
|
|
|
|
PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
|
|
|
|
PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA,
|
|
PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE,
|
|
PIRQ_MASK_FREEZE = 0xff,
|
|
|
|
/* PORT_PRD_CTL bits */
|
|
PRD_CTL_START = (1 << 0),
|
|
PRD_CTL_WR = (1 << 3),
|
|
PRD_CTL_DMAEN = (1 << 7), /* DMA enable */
|
|
|
|
/* PORT_IDMA_CTL bits */
|
|
IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
|
|
IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
|
|
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
|
|
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
|
|
};
|
|
|
|
struct inic_host_priv {
|
|
u16 cached_hctl;
|
|
};
|
|
|
|
struct inic_port_priv {
|
|
u8 dfl_prdctl;
|
|
u8 cached_prdctl;
|
|
u8 cached_pirq_mask;
|
|
};
|
|
|
|
static int inic_slave_config(struct scsi_device *sdev)
|
|
{
|
|
/* This controller is braindamaged. dma_boundary is 0xffff
|
|
* like others but it will lock up the whole machine HARD if
|
|
* 65536 byte PRD entry is fed. Reduce maximum segment size.
|
|
*/
|
|
blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
|
|
|
|
return ata_scsi_slave_config(sdev);
|
|
}
|
|
|
|
static struct scsi_host_template inic_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = inic_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const int scr_map[] = {
|
|
[SCR_STATUS] = 0,
|
|
[SCR_ERROR] = 1,
|
|
[SCR_CONTROL] = 2,
|
|
};
|
|
|
|
static void __iomem * inic_port_base(struct ata_port *ap)
|
|
{
|
|
return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
|
|
}
|
|
|
|
static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
|
|
writeb(mask, port_base + PORT_IRQ_MASK);
|
|
pp->cached_pirq_mask = mask;
|
|
}
|
|
|
|
static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
|
|
{
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
|
|
if (pp->cached_pirq_mask != mask)
|
|
__inic_set_pirq_mask(ap, mask);
|
|
}
|
|
|
|
static void inic_reset_port(void __iomem *port_base)
|
|
{
|
|
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
|
|
u16 ctl;
|
|
|
|
ctl = readw(idma_ctl);
|
|
ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
|
|
|
|
/* mask IRQ and assert reset */
|
|
writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
|
|
readw(idma_ctl); /* flush */
|
|
|
|
/* give it some time */
|
|
msleep(1);
|
|
|
|
/* release reset */
|
|
writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
|
|
|
|
/* clear irq */
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
/* reenable ATA IRQ, turn off IDMA mode */
|
|
writew(ctl, idma_ctl);
|
|
}
|
|
|
|
static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
void __iomem *addr;
|
|
|
|
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
|
|
return -EINVAL;
|
|
|
|
addr = scr_addr + scr_map[sc_reg] * 4;
|
|
*val = readl(scr_addr + scr_map[sc_reg] * 4);
|
|
|
|
/* this controller has stuck DIAG.N, ignore it */
|
|
if (sc_reg == SCR_ERROR)
|
|
*val &= ~SERR_PHYRDY_CHG;
|
|
return 0;
|
|
}
|
|
|
|
static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
|
|
{
|
|
void __iomem *scr_addr = ap->ioaddr.scr_addr;
|
|
void __iomem *addr;
|
|
|
|
if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
|
|
return -EINVAL;
|
|
|
|
addr = scr_addr + scr_map[sc_reg] * 4;
|
|
writel(val, scr_addr + scr_map[sc_reg] * 4);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In TF mode, inic162x is very similar to SFF device. TF registers
|
|
* function the same. DMA engine behaves similary using the same PRD
|
|
* format as BMDMA but different command register, interrupt and event
|
|
* notification methods are used. The following inic_bmdma_*()
|
|
* functions do the impedance matching.
|
|
*/
|
|
static void inic_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
int rw = qc->tf.flags & ATA_TFLAG_WRITE;
|
|
|
|
/* make sure device sees PRD table writes */
|
|
wmb();
|
|
|
|
/* load transfer length */
|
|
writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
|
|
|
|
/* turn on DMA and specify data direction */
|
|
pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
|
|
if (!rw)
|
|
pp->cached_prdctl |= PRD_CTL_WR;
|
|
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
static void inic_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* start host DMA transaction */
|
|
pp->cached_prdctl |= PRD_CTL_START;
|
|
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
|
|
}
|
|
|
|
static void inic_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* stop DMA engine */
|
|
writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
|
|
}
|
|
|
|
static u8 inic_bmdma_status(struct ata_port *ap)
|
|
{
|
|
/* event is already verified by the interrupt handler */
|
|
return ATA_DMA_INTR;
|
|
}
|
|
|
|
static void inic_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* noop */
|
|
}
|
|
|
|
static void inic_host_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
u8 irq_stat;
|
|
|
|
/* fetch and clear irq */
|
|
irq_stat = readb(port_base + PORT_IRQ_STAT);
|
|
writeb(irq_stat, port_base + PORT_IRQ_STAT);
|
|
|
|
if (likely(!(irq_stat & PIRQ_ERR))) {
|
|
struct ata_queued_cmd *qc =
|
|
ata_qc_from_tag(ap, ap->link.active_tag);
|
|
|
|
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
ata_chk_status(ap); /* clear ATA interrupt */
|
|
return;
|
|
}
|
|
|
|
if (likely(ata_host_intr(ap, qc)))
|
|
return;
|
|
|
|
ata_chk_status(ap); /* clear ATA interrupt */
|
|
ata_port_printk(ap, KERN_WARNING, "unhandled "
|
|
"interrupt, irq_stat=%x\n", irq_stat);
|
|
return;
|
|
}
|
|
|
|
/* error */
|
|
ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
|
|
|
|
if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_port_freeze(ap);
|
|
} else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
void __iomem *mmio_base = host->iomap[MMIO_BAR];
|
|
u16 host_irq_stat;
|
|
int i, handled = 0;;
|
|
|
|
host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
|
|
|
|
if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
|
|
goto out;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (!(host_irq_stat & (HIRQ_PORT0 << i)))
|
|
continue;
|
|
|
|
if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
|
|
inic_host_intr(ap);
|
|
handled++;
|
|
} else {
|
|
if (ata_ratelimit())
|
|
dev_printk(KERN_ERR, host->dev, "interrupt "
|
|
"from disabled port %d (0x%x)\n",
|
|
i, host_irq_stat);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* ATA IRQ doesn't wait for DMA transfer completion and vice
|
|
* versa. Mask IRQ selectively to detect command completion.
|
|
* Without it, ATA DMA read command can cause data corruption.
|
|
*
|
|
* Something similar might be needed for ATAPI writes. I
|
|
* tried a lot of combinations but couldn't find the solution.
|
|
*/
|
|
if (qc->tf.protocol == ATA_PROT_DMA &&
|
|
!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
|
|
else
|
|
inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
|
|
|
|
/* Issuing a command to yet uninitialized port locks up the
|
|
* controller. Most of the time, this happens for the first
|
|
* command after reset which are ATA and ATAPI IDENTIFYs.
|
|
* Fast fail if stat is 0x7f or 0xff for those commands.
|
|
*/
|
|
if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
|
|
qc->tf.command == ATA_CMD_ID_ATAPI)) {
|
|
u8 stat = ata_chk_status(ap);
|
|
if (stat == 0x7f || stat == 0xff)
|
|
return AC_ERR_HSM;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static void inic_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
|
|
|
|
ata_chk_status(ap);
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
readb(port_base + PORT_IRQ_STAT); /* flush */
|
|
}
|
|
|
|
static void inic_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
ata_chk_status(ap);
|
|
writeb(0xff, port_base + PORT_IRQ_STAT);
|
|
|
|
__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
|
|
|
|
readb(port_base + PORT_IRQ_STAT); /* flush */
|
|
}
|
|
|
|
/*
|
|
* SRST and SControl hardreset don't give valid signature on this
|
|
* controller. Only controller specific hardreset mechanism works.
|
|
*/
|
|
static int inic_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
u16 val;
|
|
int rc;
|
|
|
|
/* hammer it into sane state */
|
|
inic_reset_port(port_base);
|
|
|
|
val = readw(idma_ctl);
|
|
writew(val | IDMA_CTL_RST_ATA, idma_ctl);
|
|
readw(idma_ctl); /* flush */
|
|
msleep(1);
|
|
writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
|
|
|
|
rc = sata_link_resume(link, timing, deadline);
|
|
if (rc) {
|
|
ata_link_printk(link, KERN_WARNING, "failed to resume "
|
|
"link after reset (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
*class = ATA_DEV_NONE;
|
|
if (ata_link_online(link)) {
|
|
struct ata_taskfile tf;
|
|
|
|
/* wait a while before checking status */
|
|
msleep(150);
|
|
|
|
rc = ata_wait_ready(ap, deadline);
|
|
/* link occupied, -ENODEV too is an error */
|
|
if (rc) {
|
|
ata_link_printk(link, KERN_WARNING, "device not ready "
|
|
"after hardreset (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
ata_tf_read(ap, &tf);
|
|
*class = ata_dev_classify(&tf);
|
|
if (*class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void inic_error_handler(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp = ap->private_data;
|
|
unsigned long flags;
|
|
|
|
/* reset PIO HSM and stop DMA engine */
|
|
inic_reset_port(port_base);
|
|
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
ap->hsm_task_state = HSM_ST_IDLE;
|
|
writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
/* PIO and DMA engines have been stopped, perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
inic_reset_port(inic_port_base(qc->ap));
|
|
}
|
|
|
|
static void inic_dev_config(struct ata_device *dev)
|
|
{
|
|
/* inic can only handle upto LBA28 max sectors */
|
|
if (dev->max_sectors > ATA_MAX_SECTORS)
|
|
dev->max_sectors = ATA_MAX_SECTORS;
|
|
|
|
if (dev->n_sectors >= 1 << 28) {
|
|
ata_dev_printk(dev, KERN_ERR,
|
|
"ERROR: This driver doesn't support LBA48 yet and may cause\n"
|
|
" data corruption on such devices. Disabling.\n");
|
|
ata_dev_disable(dev);
|
|
}
|
|
}
|
|
|
|
static void init_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
|
|
/* Setup PRD address */
|
|
writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
|
|
}
|
|
|
|
static int inic_port_resume(struct ata_port *ap)
|
|
{
|
|
init_port(ap);
|
|
return 0;
|
|
}
|
|
|
|
static int inic_port_start(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_base = inic_port_base(ap);
|
|
struct inic_port_priv *pp;
|
|
u8 tmp;
|
|
int rc;
|
|
|
|
/* alloc and initialize private data */
|
|
pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
ap->private_data = pp;
|
|
|
|
/* default PRD_CTL value, DMAEN, WR and START off */
|
|
tmp = readb(port_base + PORT_PRD_CTL);
|
|
tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
|
|
pp->dfl_prdctl = tmp;
|
|
|
|
/* Alloc resources */
|
|
rc = ata_port_start(ap);
|
|
if (rc) {
|
|
kfree(pp);
|
|
return rc;
|
|
}
|
|
|
|
init_port(ap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ata_port_operations inic_port_ops = {
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.scr_read = inic_scr_read,
|
|
.scr_write = inic_scr_write,
|
|
|
|
.bmdma_setup = inic_bmdma_setup,
|
|
.bmdma_start = inic_bmdma_start,
|
|
.bmdma_stop = inic_bmdma_stop,
|
|
.bmdma_status = inic_bmdma_status,
|
|
|
|
.irq_clear = inic_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = inic_qc_issue,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.freeze = inic_freeze,
|
|
.thaw = inic_thaw,
|
|
.error_handler = inic_error_handler,
|
|
.post_internal_cmd = inic_post_internal_cmd,
|
|
.dev_config = inic_dev_config,
|
|
|
|
.port_resume = inic_port_resume,
|
|
|
|
.port_start = inic_port_start,
|
|
};
|
|
|
|
static struct ata_port_info inic_port_info = {
|
|
/* For some reason, ATA_PROT_ATAPI is broken on this
|
|
* controller, and no, PIO_POLLING does't fix it. It somehow
|
|
* manages to report the wrong ireason and ignoring ireason
|
|
* results in machine lock up. Tell libata to always prefer
|
|
* DMA.
|
|
*/
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &inic_port_ops
|
|
};
|
|
|
|
static int init_controller(void __iomem *mmio_base, u16 hctl)
|
|
{
|
|
int i;
|
|
u16 val;
|
|
|
|
hctl &= ~HCTL_KNOWN_BITS;
|
|
|
|
/* Soft reset whole controller. Spec says reset duration is 3
|
|
* PCI clocks, be generous and give it 10ms.
|
|
*/
|
|
writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
|
|
readw(mmio_base + HOST_CTL); /* flush */
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
msleep(1);
|
|
val = readw(mmio_base + HOST_CTL);
|
|
if (!(val & HCTL_SOFTRST))
|
|
break;
|
|
}
|
|
|
|
if (val & HCTL_SOFTRST)
|
|
return -EIO;
|
|
|
|
/* mask all interrupts and reset ports */
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
void __iomem *port_base = mmio_base + i * PORT_SIZE;
|
|
|
|
writeb(0xff, port_base + PORT_IRQ_MASK);
|
|
inic_reset_port(port_base);
|
|
}
|
|
|
|
/* port IRQ is masked now, unmask global IRQ */
|
|
writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
|
|
val = readw(mmio_base + HOST_IRQ_MASK);
|
|
val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
|
|
writew(val, mmio_base + HOST_IRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int inic_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
struct inic_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio_base = host->iomap[MMIO_BAR];
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
rc = init_controller(mmio_base, hpriv->cached_hctl);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
|
|
struct ata_host *host;
|
|
struct inic_host_priv *hpriv;
|
|
void __iomem * const *iomap;
|
|
int i, rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* alloc host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!host || !hpriv)
|
|
return -ENOMEM;
|
|
|
|
host->private_data = hpriv;
|
|
|
|
/* acquire resources and fill host */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = iomap = pcim_iomap_table(pdev);
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
struct ata_ioports *port = &ap->ioaddr;
|
|
unsigned int offset = i * PORT_SIZE;
|
|
|
|
port->cmd_addr = iomap[2 * i];
|
|
port->altstatus_addr =
|
|
port->ctl_addr = (void __iomem *)
|
|
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
|
|
port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
|
|
|
|
ata_std_ports(port);
|
|
|
|
ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
|
|
ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
|
|
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
|
|
(unsigned long long)pci_resource_start(pdev, 2 * i),
|
|
(unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
|
|
ATA_PCI_CTL_OFS);
|
|
}
|
|
|
|
hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
|
|
|
|
/* Set dma_mask. This devices doesn't support 64bit addressing. */
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"failed to initialize controller\n");
|
|
return rc;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
|
|
&inic_sht);
|
|
}
|
|
|
|
static const struct pci_device_id inic_pci_tbl[] = {
|
|
{ PCI_VDEVICE(INIT, 0x1622), },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver inic_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = inic_pci_tbl,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = inic_pci_device_resume,
|
|
#endif
|
|
.probe = inic_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int __init inic_init(void)
|
|
{
|
|
return pci_register_driver(&inic_pci_driver);
|
|
}
|
|
|
|
static void __exit inic_exit(void)
|
|
{
|
|
pci_unregister_driver(&inic_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Tejun Heo");
|
|
MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(inic_init);
|
|
module_exit(inic_exit);
|