mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Finn Thain](/assets/img/avatar_default.png)
Fix the flakiness in the CUDA ADB driver on m68k macs (keypresses getting wedged down or ADB just going AWOL altogether). The only IRQ used by this driver is the VIA shift register IRQ. The PowerMac conditional code disables the other VIA IRQ sources, so don't mess with the other IRQ flags in the common code -- m68k macs need them. When polling, don't disable local interrupts when we only need to disable the CUDA interrupt. Unless polling, don't clear the shift register IRQ flag. On m68k macs this creates a race that often breaks CUDA ADB. Tested on Quadra 840av and LC630 (both m68k); also Beige G3 (powerpc). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
633 lines
16 KiB
C
633 lines
16 KiB
C
/*
|
|
* Device driver for the via-cuda on Apple Powermacs.
|
|
*
|
|
* The VIA (versatile interface adapter) interfaces to the CUDA,
|
|
* a 6805 microprocessor core which controls the ADB (Apple Desktop
|
|
* Bus) which connects to the keyboard and mouse. The CUDA also
|
|
* controls system power and the RTC (real time clock) chip.
|
|
*
|
|
* Copyright (C) 1996 Paul Mackerras.
|
|
*/
|
|
#include <stdarg.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/cuda.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#ifdef CONFIG_PPC
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#else
|
|
#include <asm/macintosh.h>
|
|
#include <asm/macints.h>
|
|
#include <asm/machw.h>
|
|
#include <asm/mac_via.h>
|
|
#endif
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <linux/init.h>
|
|
|
|
static volatile unsigned char __iomem *via;
|
|
static DEFINE_SPINLOCK(cuda_lock);
|
|
|
|
/* VIA registers - spaced 0x200 bytes apart */
|
|
#define RS 0x200 /* skip between registers */
|
|
#define B 0 /* B-side data */
|
|
#define A RS /* A-side data */
|
|
#define DIRB (2*RS) /* B-side direction (1=output) */
|
|
#define DIRA (3*RS) /* A-side direction (1=output) */
|
|
#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
|
|
#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
|
|
#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
|
|
#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
|
|
#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
|
|
#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
|
|
#define SR (10*RS) /* Shift register */
|
|
#define ACR (11*RS) /* Auxiliary control register */
|
|
#define PCR (12*RS) /* Peripheral control register */
|
|
#define IFR (13*RS) /* Interrupt flag register */
|
|
#define IER (14*RS) /* Interrupt enable register */
|
|
#define ANH (15*RS) /* A-side data, no handshake */
|
|
|
|
/* Bits in B data register: all active low */
|
|
#define TREQ 0x08 /* Transfer request (input) */
|
|
#define TACK 0x10 /* Transfer acknowledge (output) */
|
|
#define TIP 0x20 /* Transfer in progress (output) */
|
|
|
|
/* Bits in ACR */
|
|
#define SR_CTRL 0x1c /* Shift register control bits */
|
|
#define SR_EXT 0x0c /* Shift on external clock */
|
|
#define SR_OUT 0x10 /* Shift out if 1 */
|
|
|
|
/* Bits in IFR and IER */
|
|
#define IER_SET 0x80 /* set bits in IER */
|
|
#define IER_CLR 0 /* clear bits in IER */
|
|
#define SR_INT 0x04 /* Shift register full/empty */
|
|
|
|
static enum cuda_state {
|
|
idle,
|
|
sent_first_byte,
|
|
sending,
|
|
reading,
|
|
read_done,
|
|
awaiting_reply
|
|
} cuda_state;
|
|
|
|
static struct adb_request *current_req;
|
|
static struct adb_request *last_req;
|
|
static unsigned char cuda_rbuf[16];
|
|
static unsigned char *reply_ptr;
|
|
static int reading_reply;
|
|
static int data_index;
|
|
static int cuda_irq;
|
|
#ifdef CONFIG_PPC
|
|
static struct device_node *vias;
|
|
#endif
|
|
static int cuda_fully_inited;
|
|
|
|
#ifdef CONFIG_ADB
|
|
static int cuda_probe(void);
|
|
static int cuda_init(void);
|
|
static int cuda_send_request(struct adb_request *req, int sync);
|
|
static int cuda_adb_autopoll(int devs);
|
|
static int cuda_reset_adb_bus(void);
|
|
#endif /* CONFIG_ADB */
|
|
|
|
static int cuda_init_via(void);
|
|
static void cuda_start(void);
|
|
static irqreturn_t cuda_interrupt(int irq, void *arg);
|
|
static void cuda_input(unsigned char *buf, int nb);
|
|
void cuda_poll(void);
|
|
static int cuda_write(struct adb_request *req);
|
|
|
|
int cuda_request(struct adb_request *req,
|
|
void (*done)(struct adb_request *), int nbytes, ...);
|
|
|
|
#ifdef CONFIG_ADB
|
|
struct adb_driver via_cuda_driver = {
|
|
"CUDA",
|
|
cuda_probe,
|
|
cuda_init,
|
|
cuda_send_request,
|
|
cuda_adb_autopoll,
|
|
cuda_poll,
|
|
cuda_reset_adb_bus
|
|
};
|
|
#endif /* CONFIG_ADB */
|
|
|
|
#ifdef CONFIG_PPC
|
|
int __init find_via_cuda(void)
|
|
{
|
|
struct adb_request req;
|
|
phys_addr_t taddr;
|
|
const u32 *reg;
|
|
int err;
|
|
|
|
if (vias != 0)
|
|
return 1;
|
|
vias = of_find_node_by_name(NULL, "via-cuda");
|
|
if (vias == 0)
|
|
return 0;
|
|
|
|
reg = of_get_property(vias, "reg", NULL);
|
|
if (reg == NULL) {
|
|
printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
|
|
goto fail;
|
|
}
|
|
taddr = of_translate_address(vias, reg);
|
|
if (taddr == 0) {
|
|
printk(KERN_ERR "via-cuda: Can't translate address !\n");
|
|
goto fail;
|
|
}
|
|
via = ioremap(taddr, 0x2000);
|
|
if (via == NULL) {
|
|
printk(KERN_ERR "via-cuda: Can't map address !\n");
|
|
goto fail;
|
|
}
|
|
|
|
cuda_state = idle;
|
|
sys_ctrler = SYS_CTRLER_CUDA;
|
|
|
|
err = cuda_init_via();
|
|
if (err) {
|
|
printk(KERN_ERR "cuda_init_via() failed\n");
|
|
via = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/* Clear and enable interrupts, but only on PPC. On 68K it's done */
|
|
/* for us by the main VIA driver in arch/m68k/mac/via.c */
|
|
|
|
out_8(&via[IFR], 0x7f); /* clear interrupts by writing 1s */
|
|
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
|
|
|
|
/* enable autopoll */
|
|
cuda_request(&req, NULL, 3, CUDA_PACKET, CUDA_AUTOPOLL, 1);
|
|
while (!req.complete)
|
|
cuda_poll();
|
|
|
|
return 1;
|
|
|
|
fail:
|
|
of_node_put(vias);
|
|
vias = NULL;
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PPC */
|
|
|
|
static int __init via_cuda_start(void)
|
|
{
|
|
if (via == NULL)
|
|
return -ENODEV;
|
|
|
|
#ifdef CONFIG_MAC
|
|
cuda_irq = IRQ_MAC_ADB;
|
|
#else /* CONFIG_MAC */
|
|
cuda_irq = irq_of_parse_and_map(vias, 0);
|
|
if (cuda_irq == NO_IRQ) {
|
|
printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
|
|
vias->full_name);
|
|
return -ENODEV;
|
|
}
|
|
#endif /* CONFIG_MAC */
|
|
|
|
if (request_irq(cuda_irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
|
|
printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
printk("Macintosh CUDA driver v0.5 for Unified ADB.\n");
|
|
|
|
cuda_fully_inited = 1;
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(via_cuda_start);
|
|
|
|
#ifdef CONFIG_ADB
|
|
static int
|
|
cuda_probe(void)
|
|
{
|
|
#ifdef CONFIG_PPC
|
|
if (sys_ctrler != SYS_CTRLER_CUDA)
|
|
return -ENODEV;
|
|
#else
|
|
if (macintosh_config->adb_type != MAC_ADB_CUDA)
|
|
return -ENODEV;
|
|
via = via1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
cuda_init(void)
|
|
{
|
|
#ifdef CONFIG_PPC
|
|
if (via == NULL)
|
|
return -ENODEV;
|
|
return 0;
|
|
#else
|
|
int err = cuda_init_via();
|
|
if (err) {
|
|
printk(KERN_ERR "cuda_init_via() failed\n");
|
|
return -ENODEV;
|
|
}
|
|
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
|
|
|
|
return via_cuda_start();
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_ADB */
|
|
|
|
#define WAIT_FOR(cond, what) \
|
|
do { \
|
|
int x; \
|
|
for (x = 1000; !(cond); --x) { \
|
|
if (x == 0) { \
|
|
printk("Timeout waiting for " what "\n"); \
|
|
return -ENXIO; \
|
|
} \
|
|
udelay(100); \
|
|
} \
|
|
} while (0)
|
|
|
|
static int
|
|
cuda_init_via(void)
|
|
{
|
|
out_8(&via[DIRB], (in_8(&via[DIRB]) | TACK | TIP) & ~TREQ); /* TACK & TIP out */
|
|
out_8(&via[B], in_8(&via[B]) | TACK | TIP); /* negate them */
|
|
out_8(&via[ACR] ,(in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT); /* SR data in */
|
|
(void)in_8(&via[SR]); /* clear any left-over data */
|
|
#ifdef CONFIG_PPC
|
|
out_8(&via[IER], 0x7f); /* disable interrupts from VIA */
|
|
(void)in_8(&via[IER]);
|
|
#else
|
|
out_8(&via[IER], SR_INT); /* disable SR interrupt from VIA */
|
|
#endif
|
|
|
|
/* delay 4ms and then clear any pending interrupt */
|
|
mdelay(4);
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[IFR], SR_INT);
|
|
|
|
/* sync with the CUDA - assert TACK without TIP */
|
|
out_8(&via[B], in_8(&via[B]) & ~TACK);
|
|
|
|
/* wait for the CUDA to assert TREQ in response */
|
|
WAIT_FOR((in_8(&via[B]) & TREQ) == 0, "CUDA response to sync");
|
|
|
|
/* wait for the interrupt and then clear it */
|
|
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (2)");
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[IFR], SR_INT);
|
|
|
|
/* finish the sync by negating TACK */
|
|
out_8(&via[B], in_8(&via[B]) | TACK);
|
|
|
|
/* wait for the CUDA to negate TREQ and the corresponding interrupt */
|
|
WAIT_FOR(in_8(&via[B]) & TREQ, "CUDA response to sync (3)");
|
|
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (4)");
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[IFR], SR_INT);
|
|
out_8(&via[B], in_8(&via[B]) | TIP); /* should be unnecessary */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ADB
|
|
/* Send an ADB command */
|
|
static int
|
|
cuda_send_request(struct adb_request *req, int sync)
|
|
{
|
|
int i;
|
|
|
|
if ((via == NULL) || !cuda_fully_inited) {
|
|
req->complete = 1;
|
|
return -ENXIO;
|
|
}
|
|
|
|
req->reply_expected = 1;
|
|
|
|
i = cuda_write(req);
|
|
if (i)
|
|
return i;
|
|
|
|
if (sync) {
|
|
while (!req->complete)
|
|
cuda_poll();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Enable/disable autopolling */
|
|
static int
|
|
cuda_adb_autopoll(int devs)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if ((via == NULL) || !cuda_fully_inited)
|
|
return -ENXIO;
|
|
|
|
cuda_request(&req, NULL, 3, CUDA_PACKET, CUDA_AUTOPOLL, (devs? 1: 0));
|
|
while (!req.complete)
|
|
cuda_poll();
|
|
return 0;
|
|
}
|
|
|
|
/* Reset adb bus - how do we do this?? */
|
|
static int
|
|
cuda_reset_adb_bus(void)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if ((via == NULL) || !cuda_fully_inited)
|
|
return -ENXIO;
|
|
|
|
cuda_request(&req, NULL, 2, ADB_PACKET, 0); /* maybe? */
|
|
while (!req.complete)
|
|
cuda_poll();
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ADB */
|
|
/* Construct and send a cuda request */
|
|
int
|
|
cuda_request(struct adb_request *req, void (*done)(struct adb_request *),
|
|
int nbytes, ...)
|
|
{
|
|
va_list list;
|
|
int i;
|
|
|
|
if (via == NULL) {
|
|
req->complete = 1;
|
|
return -ENXIO;
|
|
}
|
|
|
|
req->nbytes = nbytes;
|
|
req->done = done;
|
|
va_start(list, nbytes);
|
|
for (i = 0; i < nbytes; ++i)
|
|
req->data[i] = va_arg(list, int);
|
|
va_end(list);
|
|
req->reply_expected = 1;
|
|
return cuda_write(req);
|
|
}
|
|
|
|
static int
|
|
cuda_write(struct adb_request *req)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (req->nbytes < 2 || req->data[0] > CUDA_PACKET) {
|
|
req->complete = 1;
|
|
return -EINVAL;
|
|
}
|
|
req->next = NULL;
|
|
req->sent = 0;
|
|
req->complete = 0;
|
|
req->reply_len = 0;
|
|
|
|
spin_lock_irqsave(&cuda_lock, flags);
|
|
if (current_req != 0) {
|
|
last_req->next = req;
|
|
last_req = req;
|
|
} else {
|
|
current_req = req;
|
|
last_req = req;
|
|
if (cuda_state == idle)
|
|
cuda_start();
|
|
}
|
|
spin_unlock_irqrestore(&cuda_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
cuda_start(void)
|
|
{
|
|
struct adb_request *req;
|
|
|
|
/* assert cuda_state == idle */
|
|
/* get the packet to send */
|
|
req = current_req;
|
|
if (req == 0)
|
|
return;
|
|
if ((in_8(&via[B]) & TREQ) == 0)
|
|
return; /* a byte is coming in from the CUDA */
|
|
|
|
/* set the shift register to shift out and send a byte */
|
|
out_8(&via[ACR], in_8(&via[ACR]) | SR_OUT);
|
|
out_8(&via[SR], req->data[0]);
|
|
out_8(&via[B], in_8(&via[B]) & ~TIP);
|
|
cuda_state = sent_first_byte;
|
|
}
|
|
|
|
void
|
|
cuda_poll(void)
|
|
{
|
|
/* cuda_interrupt only takes a normal lock, we disable
|
|
* interrupts here to avoid re-entering and thus deadlocking.
|
|
*/
|
|
disable_irq(cuda_irq);
|
|
cuda_interrupt(0, NULL);
|
|
enable_irq(cuda_irq);
|
|
}
|
|
|
|
static irqreturn_t
|
|
cuda_interrupt(int irq, void *arg)
|
|
{
|
|
int status;
|
|
struct adb_request *req = NULL;
|
|
unsigned char ibuf[16];
|
|
int ibuf_len = 0;
|
|
int complete = 0;
|
|
|
|
spin_lock(&cuda_lock);
|
|
|
|
/* On powermacs, this handler is registered for the VIA IRQ. But it uses
|
|
* just the shift register IRQ -- other VIA interrupt sources are disabled.
|
|
* On m68k macs, the VIA IRQ sources are dispatched individually. Unless
|
|
* we are polling, the shift register IRQ flag has already been cleared.
|
|
*/
|
|
|
|
#ifdef CONFIG_MAC
|
|
if (!arg)
|
|
#endif
|
|
{
|
|
if ((in_8(&via[IFR]) & SR_INT) == 0) {
|
|
spin_unlock(&cuda_lock);
|
|
return IRQ_NONE;
|
|
} else {
|
|
out_8(&via[IFR], SR_INT);
|
|
}
|
|
}
|
|
|
|
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
|
|
/* printk("cuda_interrupt: state=%d status=%x\n", cuda_state, status); */
|
|
switch (cuda_state) {
|
|
case idle:
|
|
/* CUDA has sent us the first byte of data - unsolicited */
|
|
if (status != TREQ)
|
|
printk("cuda: state=idle, status=%x\n", status);
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[B], in_8(&via[B]) & ~TIP);
|
|
cuda_state = reading;
|
|
reply_ptr = cuda_rbuf;
|
|
reading_reply = 0;
|
|
break;
|
|
|
|
case awaiting_reply:
|
|
/* CUDA has sent us the first byte of data of a reply */
|
|
if (status != TREQ)
|
|
printk("cuda: state=awaiting_reply, status=%x\n", status);
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[B], in_8(&via[B]) & ~TIP);
|
|
cuda_state = reading;
|
|
reply_ptr = current_req->reply;
|
|
reading_reply = 1;
|
|
break;
|
|
|
|
case sent_first_byte:
|
|
if (status == TREQ + TIP + SR_OUT) {
|
|
/* collision */
|
|
out_8(&via[ACR], in_8(&via[ACR]) & ~SR_OUT);
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[B], in_8(&via[B]) | TIP | TACK);
|
|
cuda_state = idle;
|
|
} else {
|
|
/* assert status == TIP + SR_OUT */
|
|
if (status != TIP + SR_OUT)
|
|
printk("cuda: state=sent_first_byte status=%x\n", status);
|
|
out_8(&via[SR], current_req->data[1]);
|
|
out_8(&via[B], in_8(&via[B]) ^ TACK);
|
|
data_index = 2;
|
|
cuda_state = sending;
|
|
}
|
|
break;
|
|
|
|
case sending:
|
|
req = current_req;
|
|
if (data_index >= req->nbytes) {
|
|
out_8(&via[ACR], in_8(&via[ACR]) & ~SR_OUT);
|
|
(void)in_8(&via[SR]);
|
|
out_8(&via[B], in_8(&via[B]) | TACK | TIP);
|
|
req->sent = 1;
|
|
if (req->reply_expected) {
|
|
cuda_state = awaiting_reply;
|
|
} else {
|
|
current_req = req->next;
|
|
complete = 1;
|
|
/* not sure about this */
|
|
cuda_state = idle;
|
|
cuda_start();
|
|
}
|
|
} else {
|
|
out_8(&via[SR], req->data[data_index++]);
|
|
out_8(&via[B], in_8(&via[B]) ^ TACK);
|
|
}
|
|
break;
|
|
|
|
case reading:
|
|
*reply_ptr++ = in_8(&via[SR]);
|
|
if (status == TIP) {
|
|
/* that's all folks */
|
|
out_8(&via[B], in_8(&via[B]) | TACK | TIP);
|
|
cuda_state = read_done;
|
|
} else {
|
|
/* assert status == TIP | TREQ */
|
|
if (status != TIP + TREQ)
|
|
printk("cuda: state=reading status=%x\n", status);
|
|
out_8(&via[B], in_8(&via[B]) ^ TACK);
|
|
}
|
|
break;
|
|
|
|
case read_done:
|
|
(void)in_8(&via[SR]);
|
|
if (reading_reply) {
|
|
req = current_req;
|
|
req->reply_len = reply_ptr - req->reply;
|
|
if (req->data[0] == ADB_PACKET) {
|
|
/* Have to adjust the reply from ADB commands */
|
|
if (req->reply_len <= 2 || (req->reply[1] & 2) != 0) {
|
|
/* the 0x2 bit indicates no response */
|
|
req->reply_len = 0;
|
|
} else {
|
|
/* leave just the command and result bytes in the reply */
|
|
req->reply_len -= 2;
|
|
memmove(req->reply, req->reply + 2, req->reply_len);
|
|
}
|
|
}
|
|
current_req = req->next;
|
|
complete = 1;
|
|
} else {
|
|
/* This is tricky. We must break the spinlock to call
|
|
* cuda_input. However, doing so means we might get
|
|
* re-entered from another CPU getting an interrupt
|
|
* or calling cuda_poll(). I ended up using the stack
|
|
* (it's only for 16 bytes) and moving the actual
|
|
* call to cuda_input to outside of the lock.
|
|
*/
|
|
ibuf_len = reply_ptr - cuda_rbuf;
|
|
memcpy(ibuf, cuda_rbuf, ibuf_len);
|
|
}
|
|
if (status == TREQ) {
|
|
out_8(&via[B], in_8(&via[B]) & ~TIP);
|
|
cuda_state = reading;
|
|
reply_ptr = cuda_rbuf;
|
|
reading_reply = 0;
|
|
} else {
|
|
cuda_state = idle;
|
|
cuda_start();
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printk("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);
|
|
}
|
|
spin_unlock(&cuda_lock);
|
|
if (complete && req) {
|
|
void (*done)(struct adb_request *) = req->done;
|
|
mb();
|
|
req->complete = 1;
|
|
/* Here, we assume that if the request has a done member, the
|
|
* struct request will survive to setting req->complete to 1
|
|
*/
|
|
if (done)
|
|
(*done)(req);
|
|
}
|
|
if (ibuf_len)
|
|
cuda_input(ibuf, ibuf_len);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
cuda_input(unsigned char *buf, int nb)
|
|
{
|
|
int i;
|
|
|
|
switch (buf[0]) {
|
|
case ADB_PACKET:
|
|
#ifdef CONFIG_XMON
|
|
if (nb == 5 && buf[2] == 0x2c) {
|
|
extern int xmon_wants_key, xmon_adb_keycode;
|
|
if (xmon_wants_key) {
|
|
xmon_adb_keycode = buf[3];
|
|
return;
|
|
}
|
|
}
|
|
#endif /* CONFIG_XMON */
|
|
#ifdef CONFIG_ADB
|
|
adb_input(buf+2, nb-2, buf[1] & 0x40);
|
|
#endif /* CONFIG_ADB */
|
|
break;
|
|
|
|
default:
|
|
printk("data from cuda (%d bytes):", nb);
|
|
for (i = 0; i < nb; ++i)
|
|
printk(" %.2x", buf[i]);
|
|
printk("\n");
|
|
}
|
|
}
|