linux-stable/drivers/tty/serdev/core.c
Linus Torvalds 8f3207c7ea TTY/Serial patches for 4.12-rc1
Here is the "big" TTY/Serial patch updates for 4.12-rc1
 
 Not a lot of new things here, the normal number of serial driver updates
 and additions, tiny bugs fixed, and some core files split up to make
 future changes a bit easier for Nicolas's "tiny-tty" work.
 
 All of these have been in linux-next for a while.  There will be a merge
 conflict with include/linux/serdev.h coming from the bluetooth tree
 merge, which we knew about, as we wanted some of the serdev changes to
 go in through that tree.  I'll send the expected merge result as a
 follow-on message.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWRA9rw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn8OwCXSoCtZMGl25ohu1osCL5G0UEMtgCg2Z9k7hDk
 LpQTTN98hHn/VwM47ro=
 =X8sk
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the "big" TTY/Serial patch updates for 4.12-rc1

  Not a lot of new things here, the normal number of serial driver
  updates and additions, tiny bugs fixed, and some core files split up
  to make future changes a bit easier for Nicolas's "tiny-tty" work.

  All of these have been in linux-next for a while"

* tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits)
  serial: small Makefile reordering
  tty: split job control support into a file of its own
  tty: move baudrate handling code to a file of its own
  console: move console_init() out of tty_io.c
  serial: 8250_early: Add earlycon support for Palmchip UART
  tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44
  vt: make mouse selection of non-ASCII consistent
  vt: set mouse selection word-chars to gpm's default
  imx-serial: Reduce RX DMA startup latency when opening for reading
  serial: omap: suspend device on probe errors
  serial: omap: fix runtime-pm handling on unbind
  tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
  serial: samsung: Remove useless spinlock
  serial: samsung: Add missing checks for dma_map_single failure
  serial: samsung: Use right device for DMA-mapping calls
  serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
  tty: fix comment typo s/repsonsible/responsible/
  tty: amba-pl011: Fix spurious TX interrupts
  serial: xuartps: Enable clocks in the pm disable case also
  serial: core: Re-use struct uart_port {name} field
  ...
2017-05-08 18:49:23 -07:00

477 lines
12 KiB
C

/*
* Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
*
* Based on drivers/spmi/spmi.c:
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/errno.h>
#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/serdev.h>
#include <linux/slab.h>
static bool is_registered;
static DEFINE_IDA(ctrl_ida);
static void serdev_device_release(struct device *dev)
{
struct serdev_device *serdev = to_serdev_device(dev);
kfree(serdev);
}
static const struct device_type serdev_device_type = {
.release = serdev_device_release,
};
static void serdev_ctrl_release(struct device *dev)
{
struct serdev_controller *ctrl = to_serdev_controller(dev);
ida_simple_remove(&ctrl_ida, ctrl->nr);
kfree(ctrl);
}
static const struct device_type serdev_ctrl_type = {
.release = serdev_ctrl_release,
};
static int serdev_device_match(struct device *dev, struct device_driver *drv)
{
/* TODO: ACPI and platform matching */
return of_driver_match_device(dev, drv);
}
static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
{
/* TODO: ACPI and platform modalias */
return of_device_uevent_modalias(dev, env);
}
/**
* serdev_device_add() - add a device previously constructed via serdev_device_alloc()
* @serdev: serdev_device to be added
*/
int serdev_device_add(struct serdev_device *serdev)
{
struct device *parent = serdev->dev.parent;
int err;
dev_set_name(&serdev->dev, "%s-%d", dev_name(parent), serdev->nr);
err = device_add(&serdev->dev);
if (err < 0) {
dev_err(&serdev->dev, "Can't add %s, status %d\n",
dev_name(&serdev->dev), err);
goto err_device_add;
}
dev_dbg(&serdev->dev, "device %s registered\n", dev_name(&serdev->dev));
err_device_add:
return err;
}
EXPORT_SYMBOL_GPL(serdev_device_add);
/**
* serdev_device_remove(): remove an serdev device
* @serdev: serdev_device to be removed
*/
void serdev_device_remove(struct serdev_device *serdev)
{
device_unregister(&serdev->dev);
}
EXPORT_SYMBOL_GPL(serdev_device_remove);
int serdev_device_open(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->open)
return -EINVAL;
return ctrl->ops->open(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_open);
void serdev_device_close(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->close)
return;
ctrl->ops->close(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_close);
void serdev_device_write_wakeup(struct serdev_device *serdev)
{
complete(&serdev->write_comp);
}
EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
int serdev_device_write(struct serdev_device *serdev,
const unsigned char *buf, size_t count,
unsigned long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
int ret;
if (!ctrl || !ctrl->ops->write_buf ||
(timeout && !serdev->ops->write_wakeup))
return -EINVAL;
mutex_lock(&serdev->write_lock);
do {
reinit_completion(&serdev->write_comp);
ret = ctrl->ops->write_buf(ctrl, buf, count);
if (ret < 0)
break;
buf += ret;
count -= ret;
} while (count &&
(timeout = wait_for_completion_timeout(&serdev->write_comp,
timeout)));
mutex_unlock(&serdev->write_lock);
return ret < 0 ? ret : (count ? -ETIMEDOUT : 0);
}
EXPORT_SYMBOL_GPL(serdev_device_write);
void serdev_device_write_flush(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->write_flush)
return;
ctrl->ops->write_flush(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_write_flush);
int serdev_device_write_room(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->write_room)
return 0;
return serdev->ctrl->ops->write_room(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_write_room);
unsigned int serdev_device_set_baudrate(struct serdev_device *serdev, unsigned int speed)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_baudrate)
return 0;
return ctrl->ops->set_baudrate(ctrl, speed);
}
EXPORT_SYMBOL_GPL(serdev_device_set_baudrate);
void serdev_device_set_flow_control(struct serdev_device *serdev, bool enable)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_flow_control)
return;
ctrl->ops->set_flow_control(ctrl, enable);
}
EXPORT_SYMBOL_GPL(serdev_device_set_flow_control);
void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->wait_until_sent)
return;
ctrl->ops->wait_until_sent(ctrl, timeout);
}
EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
int serdev_device_get_tiocm(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->get_tiocm)
return -ENOTSUPP;
return ctrl->ops->get_tiocm(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_get_tiocm);
int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_tiocm)
return -ENOTSUPP;
return ctrl->ops->set_tiocm(ctrl, set, clear);
}
EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
static int serdev_drv_probe(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
return sdrv->probe(to_serdev_device(dev));
}
static int serdev_drv_remove(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
sdrv->remove(to_serdev_device(dev));
return 0;
}
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return of_device_modalias(dev, buf, PAGE_SIZE);
}
static struct device_attribute serdev_device_attrs[] = {
__ATTR_RO(modalias),
__ATTR_NULL
};
static struct bus_type serdev_bus_type = {
.name = "serial",
.match = serdev_device_match,
.probe = serdev_drv_probe,
.remove = serdev_drv_remove,
.uevent = serdev_uevent,
.dev_attrs = serdev_device_attrs,
};
/**
* serdev_controller_alloc() - Allocate a new serdev device
* @ctrl: associated controller
*
* Caller is responsible for either calling serdev_device_add() to add the
* newly allocated controller, or calling serdev_device_put() to discard it.
*/
struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
{
struct serdev_device *serdev;
serdev = kzalloc(sizeof(*serdev), GFP_KERNEL);
if (!serdev)
return NULL;
serdev->ctrl = ctrl;
ctrl->serdev = serdev;
device_initialize(&serdev->dev);
serdev->dev.parent = &ctrl->dev;
serdev->dev.bus = &serdev_bus_type;
serdev->dev.type = &serdev_device_type;
init_completion(&serdev->write_comp);
mutex_init(&serdev->write_lock);
return serdev;
}
EXPORT_SYMBOL_GPL(serdev_device_alloc);
/**
* serdev_controller_alloc() - Allocate a new serdev controller
* @parent: parent device
* @size: size of private data
*
* Caller is responsible for either calling serdev_controller_add() to add the
* newly allocated controller, or calling serdev_controller_put() to discard it.
* The allocated private data region may be accessed via
* serdev_controller_get_drvdata()
*/
struct serdev_controller *serdev_controller_alloc(struct device *parent,
size_t size)
{
struct serdev_controller *ctrl;
int id;
if (WARN_ON(!parent))
return NULL;
ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
if (!ctrl)
return NULL;
device_initialize(&ctrl->dev);
ctrl->dev.type = &serdev_ctrl_type;
ctrl->dev.bus = &serdev_bus_type;
ctrl->dev.parent = parent;
ctrl->dev.of_node = parent->of_node;
serdev_controller_set_drvdata(ctrl, &ctrl[1]);
id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
dev_err(parent,
"unable to allocate serdev controller identifier.\n");
serdev_controller_put(ctrl);
return NULL;
}
ctrl->nr = id;
dev_set_name(&ctrl->dev, "serial%d", id);
dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
return ctrl;
}
EXPORT_SYMBOL_GPL(serdev_controller_alloc);
static int of_serdev_register_devices(struct serdev_controller *ctrl)
{
struct device_node *node;
struct serdev_device *serdev = NULL;
int err;
bool found = false;
for_each_available_child_of_node(ctrl->dev.of_node, node) {
if (!of_get_property(node, "compatible", NULL))
continue;
dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
serdev = serdev_device_alloc(ctrl);
if (!serdev)
continue;
serdev->dev.of_node = node;
err = serdev_device_add(serdev);
if (err) {
dev_err(&serdev->dev,
"failure adding device. status %d\n", err);
serdev_device_put(serdev);
} else
found = true;
}
if (!found)
return -ENODEV;
return 0;
}
/**
* serdev_controller_add() - Add an serdev controller
* @ctrl: controller to be registered.
*
* Register a controller previously allocated via serdev_controller_alloc() with
* the serdev core.
*/
int serdev_controller_add(struct serdev_controller *ctrl)
{
int ret;
/* Can't register until after driver model init */
if (WARN_ON(!is_registered))
return -EAGAIN;
ret = device_add(&ctrl->dev);
if (ret)
return ret;
ret = of_serdev_register_devices(ctrl);
if (ret)
goto out_dev_del;
dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
ctrl->nr, &ctrl->dev);
return 0;
out_dev_del:
device_del(&ctrl->dev);
return ret;
};
EXPORT_SYMBOL_GPL(serdev_controller_add);
/* Remove a device associated with a controller */
static int serdev_remove_device(struct device *dev, void *data)
{
struct serdev_device *serdev = to_serdev_device(dev);
if (dev->type == &serdev_device_type)
serdev_device_remove(serdev);
return 0;
}
/**
* serdev_controller_remove(): remove an serdev controller
* @ctrl: controller to remove
*
* Remove a serdev controller. Caller is responsible for calling
* serdev_controller_put() to discard the allocated controller.
*/
void serdev_controller_remove(struct serdev_controller *ctrl)
{
int dummy;
if (!ctrl)
return;
dummy = device_for_each_child(&ctrl->dev, NULL,
serdev_remove_device);
device_del(&ctrl->dev);
}
EXPORT_SYMBOL_GPL(serdev_controller_remove);
/**
* serdev_driver_register() - Register client driver with serdev core
* @sdrv: client driver to be associated with client-device.
*
* This API will register the client driver with the serdev framework.
* It is typically called from the driver's module-init function.
*/
int __serdev_device_driver_register(struct serdev_device_driver *sdrv, struct module *owner)
{
sdrv->driver.bus = &serdev_bus_type;
sdrv->driver.owner = owner;
/* force drivers to async probe so I/O is possible in probe */
sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS;
return driver_register(&sdrv->driver);
}
EXPORT_SYMBOL_GPL(__serdev_device_driver_register);
static void __exit serdev_exit(void)
{
bus_unregister(&serdev_bus_type);
}
module_exit(serdev_exit);
static int __init serdev_init(void)
{
int ret;
ret = bus_register(&serdev_bus_type);
if (ret)
return ret;
is_registered = true;
return 0;
}
/* Must be before serial drivers register */
postcore_initcall(serdev_init);
MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Serial attached device bus");