linux-stable/drivers/net/phy/icplus.c
Andrew Lunn be01da72b1 phy: Centralize setting driver module owner
Rather than have each driver set the driver owner field, do it once in
the core code. This will also help with later changes, when the device
structure will move.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:31:27 -05:00

259 lines
6.1 KiB
C

/*
* Driver for ICPlus PHYs
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
/* IP101A/G - IP1001 */
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
#define IP1001_RXPHASE_SEL (1<<0) /* Add delay on RX_CLK */
#define IP1001_TXPHASE_SEL (1<<1) /* Add delay on TX_CLK */
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
static int ip175c_config_init(struct phy_device *phydev)
{
int err, i;
static int full_reset_performed;
if (full_reset_performed == 0) {
/* master reset */
err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c);
if (err < 0)
return err;
/* ensure no bus delays overlap reset period */
err = mdiobus_read(phydev->mdio.bus, 30, 0);
/* data sheet specifies reset period is 2 msec */
mdelay(2);
/* enable IP175C mode */
err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c);
if (err < 0)
return err;
/* Set MII0 speed and duplex (in PHY mode) */
err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420);
if (err < 0)
return err;
/* reset switch ports */
for (i = 0; i < 5; i++) {
err = mdiobus_write(phydev->mdio.bus, i,
MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
}
for (i = 0; i < 5; i++)
err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR);
mdelay(2);
full_reset_performed = 1;
}
if (phydev->mdio.addr != 4) {
phydev->state = PHY_RUNNING;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
phydev->link = 1;
netif_carrier_on(phydev->attached_dev);
}
return 0;
}
static int ip1xx_reset(struct phy_device *phydev)
{
int bmcr;
/* Software Reset PHY */
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
bmcr |= BMCR_RESET;
bmcr = phy_write(phydev, MII_BMCR, bmcr);
if (bmcr < 0)
return bmcr;
do {
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
} while (bmcr & BMCR_RESET);
return 0;
}
static int ip1001_config_init(struct phy_device *phydev)
{
int c;
c = ip1xx_reset(phydev);
if (c < 0)
return c;
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
if (c < 0)
return c;
c |= IP1001_APS_ON;
c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
if (c < 0)
return c;
if (phy_interface_is_rgmii(phydev)) {
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
if (c < 0)
return c;
c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
c |= IP1001_RXPHASE_SEL;
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
c |= IP1001_TXPHASE_SEL;
c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
if (c < 0)
return c;
}
return 0;
}
static int ip101a_g_config_init(struct phy_device *phydev)
{
int c;
c = ip1xx_reset(phydev);
if (c < 0)
return c;
/* INTR pin used: speed/link/duplex will cause an interrupt */
c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
if (c < 0)
return c;
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
c |= IP101A_G_APS_ON;
return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
}
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->mdio.addr == 4) /* WAN port */
genphy_read_status(phydev);
else
/* Don't need to read status for switch ports */
phydev->irq = PHY_IGNORE_INTERRUPT;
return 0;
}
static int ip175c_config_aneg(struct phy_device *phydev)
{
if (phydev->mdio.addr == 4) /* WAN port */
genphy_config_aneg(phydev);
return 0;
}
static int ip101a_g_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
if (err < 0)
return err;
return 0;
}
static struct phy_driver icplus_driver[] = {
{
.phy_id = 0x02430d80,
.name = "ICPlus IP175C",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES,
.config_init = &ip175c_config_init,
.config_aneg = &ip175c_config_aneg,
.read_status = &ip175c_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x02430d90,
.name = "ICPlus IP1001",
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x02430c54,
.name = "ICPlus IP101A/G",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.flags = PHY_HAS_INTERRUPT,
.ack_interrupt = ip101a_g_ack_interrupt,
.config_init = &ip101a_g_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
module_phy_driver(icplus_driver);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
{ 0x02430d90, 0x0ffffff0 },
{ 0x02430c54, 0x0ffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, icplus_tbl);