linux-stable/drivers/dma/fsldma.h
Linus Torvalds 0a4c56c80f fsldma: fix very broken 32-bit ppc ioread64 functionality
Commit ef91bb196b ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.

That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical.  There were no
high bits to mask off to begin with.

But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.

Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all.  Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.

This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.

This patch at least makes it not fail the build any more, and makes the
logic superficially sane.  Whether it makes any difference to the code
_working_ or not shall remain a mystery.

Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-29 13:50:56 -07:00

265 lines
7.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author:
* Zhang Wei <wei.zhang@freescale.com>, Jul 2007
* Ebony Zhu <ebony.zhu@freescale.com>, May 2007
*/
#ifndef __DMA_FSLDMA_H
#define __DMA_FSLDMA_H
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/dmaengine.h>
/* Define data structures needed by Freescale
* MPC8540 and MPC8349 DMA controller.
*/
#define FSL_DMA_MR_CS 0x00000001
#define FSL_DMA_MR_CC 0x00000002
#define FSL_DMA_MR_CA 0x00000008
#define FSL_DMA_MR_EIE 0x00000040
#define FSL_DMA_MR_XFE 0x00000020
#define FSL_DMA_MR_EOLNIE 0x00000100
#define FSL_DMA_MR_EOLSIE 0x00000080
#define FSL_DMA_MR_EOSIE 0x00000200
#define FSL_DMA_MR_CDSM 0x00000010
#define FSL_DMA_MR_CTM 0x00000004
#define FSL_DMA_MR_EMP_EN 0x00200000
#define FSL_DMA_MR_EMS_EN 0x00040000
#define FSL_DMA_MR_DAHE 0x00002000
#define FSL_DMA_MR_SAHE 0x00001000
#define FSL_DMA_MR_SAHTS_MASK 0x0000C000
#define FSL_DMA_MR_DAHTS_MASK 0x00030000
#define FSL_DMA_MR_BWC_MASK 0x0f000000
/*
* Bandwidth/pause control determines how many bytes a given
* channel is allowed to transfer before the DMA engine pauses
* the current channel and switches to the next channel
*/
#define FSL_DMA_MR_BWC 0x0A000000
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_MR_PRC_RM 0x00000800
#define FSL_DMA_SR_CH 0x00000020
#define FSL_DMA_SR_PE 0x00000010
#define FSL_DMA_SR_CB 0x00000004
#define FSL_DMA_SR_TE 0x00000080
#define FSL_DMA_SR_EOSI 0x00000002
#define FSL_DMA_SR_EOLSI 0x00000001
#define FSL_DMA_SR_EOCDI 0x00000001
#define FSL_DMA_SR_EOLNI 0x00000008
#define FSL_DMA_SATR_SBPATMU 0x20000000
#define FSL_DMA_SATR_STRANSINT_RIO 0x00c00000
#define FSL_DMA_SATR_SREADTYPE_SNOOP_READ 0x00050000
#define FSL_DMA_SATR_SREADTYPE_BP_IORH 0x00020000
#define FSL_DMA_SATR_SREADTYPE_BP_NREAD 0x00040000
#define FSL_DMA_SATR_SREADTYPE_BP_MREAD 0x00070000
#define FSL_DMA_DATR_DBPATMU 0x20000000
#define FSL_DMA_DATR_DTRANSINT_RIO 0x00c00000
#define FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE 0x00050000
#define FSL_DMA_DATR_DWRITETYPE_BP_FLUSH 0x00010000
#define FSL_DMA_EOL ((u64)0x1)
#define FSL_DMA_SNEN ((u64)0x10)
#define FSL_DMA_EOSIE 0x8
#define FSL_DMA_NLDA_MASK (~(u64)0x1f)
#define FSL_DMA_BCR_MAX_CNT 0x03ffffffu
#define FSL_DMA_DGSR_TE 0x80
#define FSL_DMA_DGSR_CH 0x20
#define FSL_DMA_DGSR_PE 0x10
#define FSL_DMA_DGSR_EOLNI 0x08
#define FSL_DMA_DGSR_CB 0x04
#define FSL_DMA_DGSR_EOSI 0x02
#define FSL_DMA_DGSR_EOLSI 0x01
#define FSL_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES))
typedef u64 __bitwise v64;
typedef u32 __bitwise v32;
struct fsl_dma_ld_hw {
v64 src_addr;
v64 dst_addr;
v64 next_ln_addr;
v32 count;
v32 reserve;
} __attribute__((aligned(32)));
struct fsl_desc_sw {
struct fsl_dma_ld_hw hw;
struct list_head node;
struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
} __attribute__((aligned(32)));
struct fsldma_chan_regs {
u32 mr; /* 0x00 - Mode Register */
u32 sr; /* 0x04 - Status Register */
u64 cdar; /* 0x08 - Current descriptor address register */
u64 sar; /* 0x10 - Source Address Register */
u64 dar; /* 0x18 - Destination Address Register */
u32 bcr; /* 0x20 - Byte Count Register */
u64 ndar; /* 0x24 - Next Descriptor Address Register */
};
struct fsldma_chan;
#define FSL_DMA_MAX_CHANS_PER_DEVICE 8
struct fsldma_device {
void __iomem *regs; /* DGSR register base */
struct device *dev;
struct dma_device common;
struct fsldma_chan *chan[FSL_DMA_MAX_CHANS_PER_DEVICE];
u32 feature; /* The same as DMA channels */
int irq; /* Channel IRQ */
};
/* Define macros for fsldma_chan->feature property */
#define FSL_DMA_LITTLE_ENDIAN 0x00000000
#define FSL_DMA_BIG_ENDIAN 0x00000001
#define FSL_DMA_IP_MASK 0x00000ff0
#define FSL_DMA_IP_85XX 0x00000010
#define FSL_DMA_IP_83XX 0x00000020
#define FSL_DMA_CHAN_PAUSE_EXT 0x00001000
#define FSL_DMA_CHAN_START_EXT 0x00002000
#ifdef CONFIG_PM
struct fsldma_chan_regs_save {
u32 mr;
};
enum fsldma_pm_state {
RUNNING = 0,
SUSPENDED,
};
#endif
struct fsldma_chan {
char name[8]; /* Channel name */
struct fsldma_chan_regs __iomem *regs;
spinlock_t desc_lock; /* Descriptor operation lock */
/*
* Descriptors which are queued to run, but have not yet been
* submitted to the hardware for execution
*/
struct list_head ld_pending;
/*
* Descriptors which are currently being executed by the hardware
*/
struct list_head ld_running;
/*
* Descriptors which have finished execution by the hardware. These
* descriptors have already had their cleanup actions run. They are
* waiting for the ACK bit to be set by the async_tx API.
*/
struct list_head ld_completed; /* Link descriptors queue */
struct dma_chan common; /* DMA common channel */
struct dma_pool *desc_pool; /* Descriptors pool */
struct device *dev; /* Channel device */
int irq; /* Channel IRQ */
int id; /* Raw id of this channel */
struct tasklet_struct tasklet;
u32 feature;
bool idle; /* DMA controller is idle */
#ifdef CONFIG_PM
struct fsldma_chan_regs_save regs_save;
enum fsldma_pm_state pm_state;
#endif
void (*toggle_ext_pause)(struct fsldma_chan *fsl_chan, int enable);
void (*toggle_ext_start)(struct fsldma_chan *fsl_chan, int enable);
void (*set_src_loop_size)(struct fsldma_chan *fsl_chan, int size);
void (*set_dst_loop_size)(struct fsldma_chan *fsl_chan, int size);
void (*set_request_count)(struct fsldma_chan *fsl_chan, int size);
};
#define to_fsl_chan(chan) container_of(chan, struct fsldma_chan, common)
#define to_fsl_desc(lh) container_of(lh, struct fsl_desc_sw, node)
#define tx_to_fsl_desc(tx) container_of(tx, struct fsl_desc_sw, async_tx)
#ifdef CONFIG_PPC
#define fsl_ioread32(p) in_le32(p)
#define fsl_ioread32be(p) in_be32(p)
#define fsl_iowrite32(v, p) out_le32(p, v)
#define fsl_iowrite32be(v, p) out_be32(p, v)
#ifdef __powerpc64__
#define fsl_ioread64(p) in_le64(p)
#define fsl_ioread64be(p) in_be64(p)
#define fsl_iowrite64(v, p) out_le64(p, v)
#define fsl_iowrite64be(v, p) out_be64(p, v)
#else
static u64 fsl_ioread64(const u64 __iomem *addr)
{
u32 val_lo = in_le32((u32 __iomem *)addr);
u32 val_hi = in_le32((u32 __iomem *)addr + 1);
return ((u64)val_hi << 32) + val_lo;
}
static void fsl_iowrite64(u64 val, u64 __iomem *addr)
{
out_le32((u32 __iomem *)addr + 1, val >> 32);
out_le32((u32 __iomem *)addr, (u32)val);
}
static u64 fsl_ioread64be(const u64 __iomem *addr)
{
u32 val_hi = in_be32((u32 __iomem *)addr);
u32 val_lo = in_be32((u32 __iomem *)addr + 1);
return ((u64)val_hi << 32) + val_lo;
}
static void fsl_iowrite64be(u64 val, u64 __iomem *addr)
{
out_be32((u32 __iomem *)addr, val >> 32);
out_be32((u32 __iomem *)addr + 1, (u32)val);
}
#endif
#endif
#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
#define fsl_ioread32(p) ioread32(p)
#define fsl_ioread32be(p) ioread32be(p)
#define fsl_iowrite32(v, p) iowrite32(v, p)
#define fsl_iowrite32be(v, p) iowrite32be(v, p)
#define fsl_ioread64(p) ioread64(p)
#define fsl_ioread64be(p) ioread64be(p)
#define fsl_iowrite64(v, p) iowrite64(v, p)
#define fsl_iowrite64be(v, p) iowrite64be(v, p)
#endif
#define FSL_DMA_IN(fsl_dma, addr, width) \
(((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ? \
fsl_ioread##width##be(addr) : fsl_ioread##width(addr))
#define FSL_DMA_OUT(fsl_dma, addr, val, width) \
(((fsl_dma)->feature & FSL_DMA_BIG_ENDIAN) ? \
fsl_iowrite##width##be(val, addr) : fsl_iowrite \
##width(val, addr))
#define DMA_TO_CPU(fsl_chan, d, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
be##width##_to_cpu((__force __be##width)(v##width)d) : \
le##width##_to_cpu((__force __le##width)(v##width)d))
#define CPU_TO_DMA(fsl_chan, c, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
(__force v##width)cpu_to_be##width(c) : \
(__force v##width)cpu_to_le##width(c))
#endif /* __DMA_FSLDMA_H */