linux-stable/drivers/watchdog/imgpdc_wdt.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

316 lines
8.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Imagination Technologies PowerDown Controller Watchdog Timer.
*
* Copyright (c) 2014 Imagination Technologies Ltd.
*
* Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
* 2012 Henrik Nordstrom
*
* Notes
* -----
* The timeout value is rounded to the next power of two clock cycles.
* This is configured using the PDC_WDT_CONFIG register, according to this
* formula:
*
* timeout = 2^(delay + 1) clock cycles
*
* Where 'delay' is the value written in PDC_WDT_CONFIG register.
*
* Therefore, the hardware only allows to program watchdog timeouts, expressed
* as a power of two number of watchdog clock cycles. The current implementation
* guarantees that the actual watchdog timeout will be _at least_ the value
* programmed in the imgpdg_wdt driver.
*
* The following table shows how the user-configured timeout relates
* to the actual hardware timeout (watchdog clock @ 40000 Hz):
*
* input timeout | WD_DELAY | actual timeout
* -----------------------------------
* 10 | 18 | 13 seconds
* 20 | 19 | 26 seconds
* 30 | 20 | 52 seconds
* 60 | 21 | 104 seconds
*
* Albeit coarse, this granularity would suffice most watchdog uses.
* If the platform allows it, the user should be able to change the watchdog
* clock rate and achieve a finer timeout granularity.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/watchdog.h>
/* registers */
#define PDC_WDT_SOFT_RESET 0x00
#define PDC_WDT_CONFIG 0x04
#define PDC_WDT_CONFIG_ENABLE BIT(31)
#define PDC_WDT_CONFIG_DELAY_MASK 0x1f
#define PDC_WDT_TICKLE1 0x08
#define PDC_WDT_TICKLE1_MAGIC 0xabcd1234
#define PDC_WDT_TICKLE2 0x0c
#define PDC_WDT_TICKLE2_MAGIC 0x4321dcba
#define PDC_WDT_TICKLE_STATUS_MASK 0x7
#define PDC_WDT_TICKLE_STATUS_SHIFT 0
#define PDC_WDT_TICKLE_STATUS_HRESET 0x0 /* Hard reset */
#define PDC_WDT_TICKLE_STATUS_TIMEOUT 0x1 /* Timeout */
#define PDC_WDT_TICKLE_STATUS_TICKLE 0x2 /* Tickled incorrectly */
#define PDC_WDT_TICKLE_STATUS_SRESET 0x3 /* Soft reset */
#define PDC_WDT_TICKLE_STATUS_USER 0x4 /* User reset */
/* Timeout values are in seconds */
#define PDC_WDT_MIN_TIMEOUT 1
#define PDC_WDT_DEF_TIMEOUT 64
static int heartbeat;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
"(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
struct pdc_wdt_dev {
struct watchdog_device wdt_dev;
struct clk *wdt_clk;
struct clk *sys_clk;
void __iomem *base;
};
static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
{
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1);
writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2);
return 0;
}
static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
{
unsigned int val;
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
val = readl(wdt->base + PDC_WDT_CONFIG);
val &= ~PDC_WDT_CONFIG_ENABLE;
writel(val, wdt->base + PDC_WDT_CONFIG);
/* Must tickle to finish the stop */
pdc_wdt_keepalive(wdt_dev);
return 0;
}
static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt)
{
unsigned long clk_rate = clk_get_rate(wdt->wdt_clk);
unsigned int val;
val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK;
val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1;
writel(val, wdt->base + PDC_WDT_CONFIG);
}
static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
unsigned int new_timeout)
{
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
wdt->wdt_dev.timeout = new_timeout;
__pdc_wdt_set_timeout(wdt);
return 0;
}
/* Start the watchdog timer (delay should already be set) */
static int pdc_wdt_start(struct watchdog_device *wdt_dev)
{
unsigned int val;
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
__pdc_wdt_set_timeout(wdt);
val = readl(wdt->base + PDC_WDT_CONFIG);
val |= PDC_WDT_CONFIG_ENABLE;
writel(val, wdt->base + PDC_WDT_CONFIG);
return 0;
}
static int pdc_wdt_restart(struct watchdog_device *wdt_dev,
unsigned long action, void *data)
{
struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
/* Assert SOFT_RESET */
writel(0x1, wdt->base + PDC_WDT_SOFT_RESET);
return 0;
}
static const struct watchdog_info pdc_wdt_info = {
.identity = "IMG PDC Watchdog",
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
};
static const struct watchdog_ops pdc_wdt_ops = {
.owner = THIS_MODULE,
.start = pdc_wdt_start,
.stop = pdc_wdt_stop,
.ping = pdc_wdt_keepalive,
.set_timeout = pdc_wdt_set_timeout,
.restart = pdc_wdt_restart,
};
static void pdc_clk_disable_unprepare(void *data)
{
clk_disable_unprepare(data);
}
static int pdc_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
u64 div;
int ret, val;
unsigned long clk_rate;
struct pdc_wdt_dev *pdc_wdt;
pdc_wdt = devm_kzalloc(dev, sizeof(*pdc_wdt), GFP_KERNEL);
if (!pdc_wdt)
return -ENOMEM;
pdc_wdt->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pdc_wdt->base))
return PTR_ERR(pdc_wdt->base);
pdc_wdt->sys_clk = devm_clk_get(dev, "sys");
if (IS_ERR(pdc_wdt->sys_clk)) {
dev_err(dev, "failed to get the sys clock\n");
return PTR_ERR(pdc_wdt->sys_clk);
}
pdc_wdt->wdt_clk = devm_clk_get(dev, "wdt");
if (IS_ERR(pdc_wdt->wdt_clk)) {
dev_err(dev, "failed to get the wdt clock\n");
return PTR_ERR(pdc_wdt->wdt_clk);
}
ret = clk_prepare_enable(pdc_wdt->sys_clk);
if (ret) {
dev_err(dev, "could not prepare or enable sys clock\n");
return ret;
}
ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
pdc_wdt->sys_clk);
if (ret)
return ret;
ret = clk_prepare_enable(pdc_wdt->wdt_clk);
if (ret) {
dev_err(dev, "could not prepare or enable wdt clock\n");
return ret;
}
ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
pdc_wdt->wdt_clk);
if (ret)
return ret;
/* We use the clock rate to calculate the max timeout */
clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
if (clk_rate == 0) {
dev_err(dev, "failed to get clock rate\n");
return -EINVAL;
}
if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) {
dev_err(dev, "invalid clock rate\n");
return -EINVAL;
}
if (order_base_2(clk_rate) == 0)
pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1;
else
pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT;
pdc_wdt->wdt_dev.info = &pdc_wdt_info;
pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1);
do_div(div, clk_rate);
pdc_wdt->wdt_dev.max_timeout = div;
pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
pdc_wdt->wdt_dev.parent = dev;
watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, dev);
pdc_wdt_stop(&pdc_wdt->wdt_dev);
/* Find what caused the last reset */
val = readl(pdc_wdt->base + PDC_WDT_TICKLE1);
val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT;
switch (val) {
case PDC_WDT_TICKLE_STATUS_TICKLE:
case PDC_WDT_TICKLE_STATUS_TIMEOUT:
pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
dev_info(dev, "watchdog module last reset due to timeout\n");
break;
case PDC_WDT_TICKLE_STATUS_HRESET:
dev_info(dev,
"watchdog module last reset due to hard reset\n");
break;
case PDC_WDT_TICKLE_STATUS_SRESET:
dev_info(dev,
"watchdog module last reset due to soft reset\n");
break;
case PDC_WDT_TICKLE_STATUS_USER:
dev_info(dev,
"watchdog module last reset due to user reset\n");
break;
default:
dev_info(dev, "contains an illegal status code (%08x)\n", val);
break;
}
watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
watchdog_set_restart_priority(&pdc_wdt->wdt_dev, 128);
platform_set_drvdata(pdev, pdc_wdt);
watchdog_stop_on_reboot(&pdc_wdt->wdt_dev);
watchdog_stop_on_unregister(&pdc_wdt->wdt_dev);
return devm_watchdog_register_device(dev, &pdc_wdt->wdt_dev);
}
static const struct of_device_id pdc_wdt_match[] = {
{ .compatible = "img,pdc-wdt" },
{}
};
MODULE_DEVICE_TABLE(of, pdc_wdt_match);
static struct platform_driver pdc_wdt_driver = {
.driver = {
.name = "imgpdc-wdt",
.of_match_table = pdc_wdt_match,
},
.probe = pdc_wdt_probe,
};
module_platform_driver(pdc_wdt_driver);
MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
MODULE_LICENSE("GPL v2");