linux-stable/drivers/cpuidle/cpuidle-tegra.c
Dmitry Osipenko bdb1ffdad3 cpuidle: tegra: Check whether PMC is ready
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-05 19:11:40 +02:00

391 lines
9.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* CPU idle driver for Tegra CPUs
*
* Copyright (c) 2010-2013, NVIDIA Corporation.
* Copyright (c) 2011 Google, Inc.
* Author: Colin Cross <ccross@android.com>
* Gary King <gking@nvidia.com>
*
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
*
* Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com>
*/
#define pr_fmt(fmt) "tegra-cpuidle: " fmt
#include <linux/atomic.h>
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/clk/tegra.h>
#include <linux/firmware/trusted_foundations.h>
#include <soc/tegra/cpuidle.h>
#include <soc/tegra/flowctrl.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/irq.h>
#include <soc/tegra/pm.h>
#include <soc/tegra/pmc.h>
#include <asm/cpuidle.h>
#include <asm/firmware.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
enum tegra_state {
TEGRA_C1,
TEGRA_C7,
TEGRA_CC6,
TEGRA_STATE_COUNT,
};
static atomic_t tegra_idle_barrier;
static atomic_t tegra_abort_flag;
static void tegra_cpuidle_report_cpus_state(void)
{
unsigned long cpu, lcpu, csr;
for_each_cpu(lcpu, cpu_possible_mask) {
cpu = cpu_logical_map(lcpu);
csr = flowctrl_read_cpu_csr(cpu);
pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",
cpu, cpu_online(lcpu), csr);
}
}
static int tegra_cpuidle_wait_for_secondary_cpus_parking(void)
{
unsigned int retries = 3;
while (retries--) {
unsigned int delay_us = 10;
unsigned int timeout_us = 500 * 1000 / delay_us;
/*
* The primary CPU0 core shall wait for the secondaries
* shutdown in order to power-off CPU's cluster safely.
* The timeout value depends on the current CPU frequency,
* it takes about 40-150us in average and over 1000us in
* a worst case scenario.
*/
do {
if (tegra_cpu_rail_off_ready())
return 0;
udelay(delay_us);
} while (timeout_us--);
pr_err("secondary CPU taking too long to park\n");
tegra_cpuidle_report_cpus_state();
}
pr_err("timed out waiting secondaries to park\n");
return -ETIMEDOUT;
}
static void tegra_cpuidle_unpark_secondary_cpus(void)
{
unsigned int cpu, lcpu;
for_each_cpu(lcpu, cpu_online_mask) {
cpu = cpu_logical_map(lcpu);
if (cpu > 0) {
tegra_enable_cpu_clock(cpu);
tegra_cpu_out_of_reset(cpu);
flowctrl_write_cpu_halt(cpu, 0);
}
}
}
static int tegra_cpuidle_cc6_enter(unsigned int cpu)
{
int ret;
if (cpu > 0) {
ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu);
} else {
ret = tegra_cpuidle_wait_for_secondary_cpus_parking();
if (!ret)
ret = tegra_pm_enter_lp2();
tegra_cpuidle_unpark_secondary_cpus();
}
return ret;
}
static int tegra_cpuidle_c7_enter(void)
{
int err;
err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
if (err && err != -ENOSYS)
return err;
return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend);
}
static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
{
if (tegra_pending_sgi()) {
/*
* CPU got local interrupt that will be lost after GIC's
* shutdown because GIC driver doesn't save/restore the
* pending SGI state across CPU cluster PM. Abort and retry
* next time.
*/
atomic_set(&tegra_abort_flag, 1);
}
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
if (atomic_read(&tegra_abort_flag)) {
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
atomic_set(&tegra_abort_flag, 0);
return -EINTR;
}
return 0;
}
static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
int index, unsigned int cpu)
{
int err;
/*
* CC6 state is the "CPU cluster power-off" state. In order to
* enter this state, at first the secondary CPU cores need to be
* parked into offline mode, then the last CPU should clean out
* remaining dirty cache lines into DRAM and trigger Flow Controller
* logic that turns off the cluster's power domain (which includes
* CPU cores, GIC and L2 cache).
*/
if (index == TEGRA_CC6) {
err = tegra_cpuidle_coupled_barrier(dev);
if (err)
return err;
}
local_fiq_disable();
RCU_NONIDLE(tegra_pm_set_cpu_in_lp2());
cpu_pm_enter();
switch (index) {
case TEGRA_C7:
err = tegra_cpuidle_c7_enter();
break;
case TEGRA_CC6:
err = tegra_cpuidle_cc6_enter(cpu);
break;
default:
err = -EINVAL;
break;
}
cpu_pm_exit();
RCU_NONIDLE(tegra_pm_clear_cpu_in_lp2());
local_fiq_enable();
return err ?: index;
}
static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
{
/*
* On Tegra30 CPU0 can't be power-gated separately from secondary
* cores because it gates the whole CPU cluster.
*/
if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30)
return index;
/* put CPU0 into C1 if C7 is requested and secondaries are online */
if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1)
index = TEGRA_C1;
else
index = TEGRA_CC6;
return index;
}
static int tegra_cpuidle_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
unsigned int cpu = cpu_logical_map(dev->cpu);
int ret;
index = tegra_cpuidle_adjust_state_index(index, cpu);
if (dev->states_usage[index].disable)
return -1;
if (index == TEGRA_C1)
ret = arm_cpuidle_simple_enter(dev, drv, index);
else
ret = tegra_cpuidle_state_enter(dev, index, cpu);
if (ret < 0) {
if (ret != -EINTR || index != TEGRA_CC6)
pr_err_once("failed to enter state %d err: %d\n",
index, ret);
index = -1;
} else {
index = ret;
}
return index;
}
static int tegra114_enter_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
tegra_cpuidle_enter(dev, drv, index);
return 0;
}
/*
* The previous versions of Tegra CPUIDLE driver used a different "legacy"
* terminology for naming of the idling states, while this driver uses the
* new terminology.
*
* Mapping of the old terms into the new ones:
*
* Old | New
* ---------
* LP3 | C1 (CPU core clock gating)
* LP2 | C7 (CPU core power gating)
* LP2 | CC6 (CPU cluster power gating)
*
* Note that that the older CPUIDLE driver versions didn't explicitly
* differentiate the LP2 states because these states either used the same
* code path or because CC6 wasn't supported.
*/
static struct cpuidle_driver tegra_idle_driver = {
.name = "tegra_idle",
.states = {
[TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600),
[TEGRA_C7] = {
.enter = tegra_cpuidle_enter,
.exit_latency = 2000,
.target_residency = 2200,
.power_usage = 100,
.flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "C7",
.desc = "CPU core powered off",
},
[TEGRA_CC6] = {
.enter = tegra_cpuidle_enter,
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIMER_STOP |
CPUIDLE_FLAG_COUPLED,
.name = "CC6",
.desc = "CPU cluster powered off",
},
},
.state_count = TEGRA_STATE_COUNT,
.safe_state_index = TEGRA_C1,
};
static inline void tegra_cpuidle_disable_state(enum tegra_state state)
{
cpuidle_driver_state_disabled(&tegra_idle_driver, state, true);
}
/*
* Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
* they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around
* this, simply disable CC6 if the PCI driver and DT node are both enabled.
*/
void tegra_cpuidle_pcie_irqs_in_use(void)
{
struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6];
if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) ||
tegra_get_chip_id() != TEGRA20)
return;
pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
tegra_cpuidle_disable_state(TEGRA_CC6);
}
static void tegra_cpuidle_setup_tegra114_c7_state(void)
{
struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7];
s->enter_s2idle = tegra114_enter_s2idle;
s->target_residency = 1000;
s->exit_latency = 500;
}
static int tegra_cpuidle_probe(struct platform_device *pdev)
{
if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NOT_READY)
return -EPROBE_DEFER;
/* LP2 could be disabled in device-tree */
if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
tegra_cpuidle_disable_state(TEGRA_CC6);
/*
* Required suspend-resume functionality, which is provided by the
* Tegra-arch core and PMC driver, is unavailable if PM-sleep option
* is disabled.
*/
if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
tegra_cpuidle_disable_state(TEGRA_C7);
tegra_cpuidle_disable_state(TEGRA_CC6);
}
/*
* Generic WFI state (also known as C1 or LP3) and the coupled CPU
* cluster power-off (CC6 or LP2) states are common for all Tegra SoCs.
*/
switch (tegra_get_chip_id()) {
case TEGRA20:
/* Tegra20 isn't capable to power-off individual CPU cores */
tegra_cpuidle_disable_state(TEGRA_C7);
break;
case TEGRA30:
break;
case TEGRA114:
case TEGRA124:
tegra_cpuidle_setup_tegra114_c7_state();
/* coupled CC6 (LP2) state isn't implemented yet */
tegra_cpuidle_disable_state(TEGRA_CC6);
break;
default:
return -EINVAL;
}
return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
}
static struct platform_driver tegra_cpuidle_driver = {
.probe = tegra_cpuidle_probe,
.driver = {
.name = "tegra-cpuidle",
},
};
builtin_platform_driver(tegra_cpuidle_driver);