mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Mark Brown](/assets/img/avatar_default.png)
This will allow us to move to a more idiomatic MFD model as drivers will be able to get the struct by looking at their parent device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
778 lines
18 KiB
C
778 lines
18 KiB
C
/*
|
|
* wm8350-core.c -- Device access for Wolfson WM8350
|
|
*
|
|
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Liam Girdwood, Mark Brown
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/mfd/wm8350/core.h>
|
|
#include <linux/mfd/wm8350/audio.h>
|
|
#include <linux/mfd/wm8350/comparator.h>
|
|
#include <linux/mfd/wm8350/gpio.h>
|
|
#include <linux/mfd/wm8350/pmic.h>
|
|
#include <linux/mfd/wm8350/rtc.h>
|
|
#include <linux/mfd/wm8350/supply.h>
|
|
#include <linux/mfd/wm8350/wdt.h>
|
|
|
|
#define WM8350_UNLOCK_KEY 0x0013
|
|
#define WM8350_LOCK_KEY 0x0000
|
|
|
|
#define WM8350_CLOCK_CONTROL_1 0x28
|
|
#define WM8350_AIF_TEST 0x74
|
|
|
|
/* debug */
|
|
#define WM8350_BUS_DEBUG 0
|
|
#if WM8350_BUS_DEBUG
|
|
#define dump(regs, src) do { \
|
|
int i_; \
|
|
u16 *src_ = src; \
|
|
printk(KERN_DEBUG); \
|
|
for (i_ = 0; i_ < regs; i_++) \
|
|
printk(" 0x%4.4x", *src_++); \
|
|
printk("\n"); \
|
|
} while (0);
|
|
#else
|
|
#define dump(bytes, src)
|
|
#endif
|
|
|
|
#define WM8350_LOCK_DEBUG 0
|
|
#if WM8350_LOCK_DEBUG
|
|
#define ldbg(format, arg...) printk(format, ## arg)
|
|
#else
|
|
#define ldbg(format, arg...)
|
|
#endif
|
|
|
|
/*
|
|
* WM8350 Device IO
|
|
*/
|
|
static DEFINE_MUTEX(io_mutex);
|
|
static DEFINE_MUTEX(reg_lock_mutex);
|
|
|
|
/* Perform a physical read from the device.
|
|
*/
|
|
static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
|
|
u16 *dest)
|
|
{
|
|
int i, ret;
|
|
int bytes = num_regs * 2;
|
|
|
|
dev_dbg(wm8350->dev, "volatile read\n");
|
|
ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest);
|
|
|
|
for (i = reg; i < reg + num_regs; i++) {
|
|
/* Cache is CPU endian */
|
|
dest[i - reg] = be16_to_cpu(dest[i - reg]);
|
|
|
|
/* Mask out non-readable bits */
|
|
dest[i - reg] &= wm8350_reg_io_map[i].readable;
|
|
}
|
|
|
|
dump(num_regs, dest);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
|
|
{
|
|
int i;
|
|
int end = reg + num_regs;
|
|
int ret = 0;
|
|
int bytes = num_regs * 2;
|
|
|
|
if (wm8350->read_dev == NULL)
|
|
return -ENODEV;
|
|
|
|
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
|
|
dev_err(wm8350->dev, "invalid reg %x\n",
|
|
reg + num_regs - 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(wm8350->dev,
|
|
"%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
|
|
|
|
#if WM8350_BUS_DEBUG
|
|
/* we can _safely_ read any register, but warn if read not supported */
|
|
for (i = reg; i < end; i++) {
|
|
if (!wm8350_reg_io_map[i].readable)
|
|
dev_warn(wm8350->dev,
|
|
"reg R%d is not readable\n", i);
|
|
}
|
|
#endif
|
|
|
|
/* if any volatile registers are required, then read back all */
|
|
for (i = reg; i < end; i++)
|
|
if (wm8350_reg_io_map[i].vol)
|
|
return wm8350_phys_read(wm8350, reg, num_regs, dest);
|
|
|
|
/* no volatiles, then cache is good */
|
|
dev_dbg(wm8350->dev, "cache read\n");
|
|
memcpy(dest, &wm8350->reg_cache[reg], bytes);
|
|
dump(num_regs, dest);
|
|
return ret;
|
|
}
|
|
|
|
static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
|
|
{
|
|
if (reg == WM8350_SECURITY ||
|
|
wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
|
|
return 0;
|
|
|
|
if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
|
|
reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
|
|
(reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
|
|
reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
|
|
{
|
|
int i;
|
|
int end = reg + num_regs;
|
|
int bytes = num_regs * 2;
|
|
|
|
if (wm8350->write_dev == NULL)
|
|
return -ENODEV;
|
|
|
|
if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
|
|
dev_err(wm8350->dev, "invalid reg %x\n",
|
|
reg + num_regs - 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* it's generally not a good idea to write to RO or locked registers */
|
|
for (i = reg; i < end; i++) {
|
|
if (!wm8350_reg_io_map[i].writable) {
|
|
dev_err(wm8350->dev,
|
|
"attempted write to read only reg R%d\n", i);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (is_reg_locked(wm8350, i)) {
|
|
dev_err(wm8350->dev,
|
|
"attempted write to locked reg R%d\n", i);
|
|
return -EINVAL;
|
|
}
|
|
|
|
src[i - reg] &= wm8350_reg_io_map[i].writable;
|
|
|
|
wm8350->reg_cache[i] =
|
|
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
|
|
| src[i - reg];
|
|
|
|
src[i - reg] = cpu_to_be16(src[i - reg]);
|
|
}
|
|
|
|
/* Actually write it out */
|
|
return wm8350->write_dev(wm8350, reg, bytes, (char *)src);
|
|
}
|
|
|
|
/*
|
|
* Safe read, modify, write methods
|
|
*/
|
|
int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
|
|
{
|
|
u16 data;
|
|
int err;
|
|
|
|
mutex_lock(&io_mutex);
|
|
err = wm8350_read(wm8350, reg, 1, &data);
|
|
if (err) {
|
|
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
|
|
goto out;
|
|
}
|
|
|
|
data &= ~mask;
|
|
err = wm8350_write(wm8350, reg, 1, &data);
|
|
if (err)
|
|
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
|
|
out:
|
|
mutex_unlock(&io_mutex);
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_clear_bits);
|
|
|
|
int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
|
|
{
|
|
u16 data;
|
|
int err;
|
|
|
|
mutex_lock(&io_mutex);
|
|
err = wm8350_read(wm8350, reg, 1, &data);
|
|
if (err) {
|
|
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
|
|
goto out;
|
|
}
|
|
|
|
data |= mask;
|
|
err = wm8350_write(wm8350, reg, 1, &data);
|
|
if (err)
|
|
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
|
|
out:
|
|
mutex_unlock(&io_mutex);
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_set_bits);
|
|
|
|
u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
|
|
{
|
|
u16 data;
|
|
int err;
|
|
|
|
mutex_lock(&io_mutex);
|
|
err = wm8350_read(wm8350, reg, 1, &data);
|
|
if (err)
|
|
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
|
|
|
|
mutex_unlock(&io_mutex);
|
|
return data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_reg_read);
|
|
|
|
int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
|
|
{
|
|
int ret;
|
|
u16 data = val;
|
|
|
|
mutex_lock(&io_mutex);
|
|
ret = wm8350_write(wm8350, reg, 1, &data);
|
|
if (ret)
|
|
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
|
|
mutex_unlock(&io_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_reg_write);
|
|
|
|
int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
|
|
u16 *dest)
|
|
{
|
|
int err = 0;
|
|
|
|
mutex_lock(&io_mutex);
|
|
err = wm8350_read(wm8350, start_reg, regs, dest);
|
|
if (err)
|
|
dev_err(wm8350->dev, "block read starting from R%d failed\n",
|
|
start_reg);
|
|
mutex_unlock(&io_mutex);
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_block_read);
|
|
|
|
int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
|
|
u16 *src)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&io_mutex);
|
|
ret = wm8350_write(wm8350, start_reg, regs, src);
|
|
if (ret)
|
|
dev_err(wm8350->dev, "block write starting at R%d failed\n",
|
|
start_reg);
|
|
mutex_unlock(&io_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_block_write);
|
|
|
|
/**
|
|
* wm8350_reg_lock()
|
|
*
|
|
* The WM8350 has a hardware lock which can be used to prevent writes to
|
|
* some registers (generally those which can cause particularly serious
|
|
* problems if misused). This function enables that lock.
|
|
*/
|
|
int wm8350_reg_lock(struct wm8350 *wm8350)
|
|
{
|
|
u16 key = WM8350_LOCK_KEY;
|
|
int ret;
|
|
|
|
ldbg(__func__);
|
|
mutex_lock(&io_mutex);
|
|
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
|
|
if (ret)
|
|
dev_err(wm8350->dev, "lock failed\n");
|
|
mutex_unlock(&io_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_reg_lock);
|
|
|
|
/**
|
|
* wm8350_reg_unlock()
|
|
*
|
|
* The WM8350 has a hardware lock which can be used to prevent writes to
|
|
* some registers (generally those which can cause particularly serious
|
|
* problems if misused). This function disables that lock so updates
|
|
* can be performed. For maximum safety this should be done only when
|
|
* required.
|
|
*/
|
|
int wm8350_reg_unlock(struct wm8350 *wm8350)
|
|
{
|
|
u16 key = WM8350_UNLOCK_KEY;
|
|
int ret;
|
|
|
|
ldbg(__func__);
|
|
mutex_lock(&io_mutex);
|
|
ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
|
|
if (ret)
|
|
dev_err(wm8350->dev, "unlock failed\n");
|
|
mutex_unlock(&io_mutex);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
|
|
|
|
int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
|
|
{
|
|
u16 reg, result = 0;
|
|
|
|
if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
|
|
return -EINVAL;
|
|
if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
|
|
&& (scale != 0 || vref != 0))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&wm8350->auxadc_mutex);
|
|
|
|
/* Turn on the ADC */
|
|
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
|
|
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
|
|
|
|
if (scale || vref) {
|
|
reg = scale << 13;
|
|
reg |= vref << 12;
|
|
wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
|
|
}
|
|
|
|
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
|
|
reg |= 1 << channel | WM8350_AUXADC_POLL;
|
|
wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
|
|
|
|
/* If a late IRQ left the completion signalled then consume
|
|
* the completion. */
|
|
try_wait_for_completion(&wm8350->auxadc_done);
|
|
|
|
/* We ignore the result of the completion and just check for a
|
|
* conversion result, allowing us to soldier on if the IRQ
|
|
* infrastructure is not set up for the chip. */
|
|
wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
|
|
|
|
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
|
|
if (reg & WM8350_AUXADC_POLL)
|
|
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
|
|
else
|
|
result = wm8350_reg_read(wm8350,
|
|
WM8350_AUX1_READBACK + channel);
|
|
|
|
/* Turn off the ADC */
|
|
reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
|
|
wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
|
|
reg & ~WM8350_AUXADC_ENA);
|
|
|
|
mutex_unlock(&wm8350->auxadc_mutex);
|
|
|
|
return result & WM8350_AUXADC_DATA1_MASK;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
|
|
|
|
static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
|
|
{
|
|
struct wm8350 *wm8350 = irq_data;
|
|
|
|
complete(&wm8350->auxadc_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Cache is always host endian.
|
|
*/
|
|
static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
|
|
{
|
|
int i, ret = 0;
|
|
u16 value;
|
|
const u16 *reg_map;
|
|
|
|
switch (type) {
|
|
case 0:
|
|
switch (mode) {
|
|
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
|
|
case 0:
|
|
reg_map = wm8350_mode0_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
|
|
case 1:
|
|
reg_map = wm8350_mode1_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
|
|
case 2:
|
|
reg_map = wm8350_mode2_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
|
|
case 3:
|
|
reg_map = wm8350_mode3_defaults;
|
|
break;
|
|
#endif
|
|
default:
|
|
dev_err(wm8350->dev,
|
|
"WM8350 configuration mode %d not supported\n",
|
|
mode);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
switch (mode) {
|
|
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
|
|
case 0:
|
|
reg_map = wm8351_mode0_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
|
|
case 1:
|
|
reg_map = wm8351_mode1_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
|
|
case 2:
|
|
reg_map = wm8351_mode2_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
|
|
case 3:
|
|
reg_map = wm8351_mode3_defaults;
|
|
break;
|
|
#endif
|
|
default:
|
|
dev_err(wm8350->dev,
|
|
"WM8351 configuration mode %d not supported\n",
|
|
mode);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
switch (mode) {
|
|
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
|
|
case 0:
|
|
reg_map = wm8352_mode0_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
|
|
case 1:
|
|
reg_map = wm8352_mode1_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
|
|
case 2:
|
|
reg_map = wm8352_mode2_defaults;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
|
|
case 3:
|
|
reg_map = wm8352_mode3_defaults;
|
|
break;
|
|
#endif
|
|
default:
|
|
dev_err(wm8350->dev,
|
|
"WM8352 configuration mode %d not supported\n",
|
|
mode);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_err(wm8350->dev,
|
|
"WM835x configuration mode %d not supported\n",
|
|
mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
wm8350->reg_cache =
|
|
kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
|
|
if (wm8350->reg_cache == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* Read the initial cache state back from the device - this is
|
|
* a PMIC so the device many not be in a virgin state and we
|
|
* can't rely on the silicon values.
|
|
*/
|
|
ret = wm8350->read_dev(wm8350, 0,
|
|
sizeof(u16) * (WM8350_MAX_REGISTER + 1),
|
|
wm8350->reg_cache);
|
|
if (ret < 0) {
|
|
dev_err(wm8350->dev,
|
|
"failed to read initial cache values\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Mask out uncacheable/unreadable bits and the audio. */
|
|
for (i = 0; i < WM8350_MAX_REGISTER; i++) {
|
|
if (wm8350_reg_io_map[i].readable &&
|
|
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
|
|
value = be16_to_cpu(wm8350->reg_cache[i]);
|
|
value &= wm8350_reg_io_map[i].readable;
|
|
wm8350->reg_cache[i] = value;
|
|
} else
|
|
wm8350->reg_cache[i] = reg_map[i];
|
|
}
|
|
|
|
out:
|
|
kfree(wm8350->reg_cache);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Register a client device. This is non-fatal since there is no need to
|
|
* fail the entire device init due to a single platform device failing.
|
|
*/
|
|
static void wm8350_client_dev_register(struct wm8350 *wm8350,
|
|
const char *name,
|
|
struct platform_device **pdev)
|
|
{
|
|
int ret;
|
|
|
|
*pdev = platform_device_alloc(name, -1);
|
|
if (*pdev == NULL) {
|
|
dev_err(wm8350->dev, "Failed to allocate %s\n", name);
|
|
return;
|
|
}
|
|
|
|
(*pdev)->dev.parent = wm8350->dev;
|
|
platform_set_drvdata(*pdev, wm8350);
|
|
ret = platform_device_add(*pdev);
|
|
if (ret != 0) {
|
|
dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
|
|
platform_device_put(*pdev);
|
|
*pdev = NULL;
|
|
}
|
|
}
|
|
|
|
int wm8350_device_init(struct wm8350 *wm8350, int irq,
|
|
struct wm8350_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
u16 id1, id2, mask_rev;
|
|
u16 cust_id, mode, chip_rev;
|
|
|
|
dev_set_drvdata(wm8350->dev, wm8350);
|
|
|
|
/* get WM8350 revision and config mode */
|
|
ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
|
|
if (ret != 0) {
|
|
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
|
|
if (ret != 0) {
|
|
dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
|
|
&mask_rev);
|
|
if (ret != 0) {
|
|
dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
id1 = be16_to_cpu(id1);
|
|
id2 = be16_to_cpu(id2);
|
|
mask_rev = be16_to_cpu(mask_rev);
|
|
|
|
if (id1 != 0x6143) {
|
|
dev_err(wm8350->dev,
|
|
"Device with ID %x is not a WM8350\n", id1);
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
mode = id2 & WM8350_CONF_STS_MASK >> 10;
|
|
cust_id = id2 & WM8350_CUST_ID_MASK;
|
|
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
|
|
dev_info(wm8350->dev,
|
|
"CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
|
|
mode, cust_id, mask_rev, chip_rev);
|
|
|
|
if (cust_id != 0) {
|
|
dev_err(wm8350->dev, "Unsupported CUST_ID\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
switch (mask_rev) {
|
|
case 0:
|
|
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
|
|
wm8350->pmic.max_isink = WM8350_ISINK_B;
|
|
|
|
switch (chip_rev) {
|
|
case WM8350_REV_E:
|
|
dev_info(wm8350->dev, "WM8350 Rev E\n");
|
|
break;
|
|
case WM8350_REV_F:
|
|
dev_info(wm8350->dev, "WM8350 Rev F\n");
|
|
break;
|
|
case WM8350_REV_G:
|
|
dev_info(wm8350->dev, "WM8350 Rev G\n");
|
|
wm8350->power.rev_g_coeff = 1;
|
|
break;
|
|
case WM8350_REV_H:
|
|
dev_info(wm8350->dev, "WM8350 Rev H\n");
|
|
wm8350->power.rev_g_coeff = 1;
|
|
break;
|
|
default:
|
|
/* For safety we refuse to run on unknown hardware */
|
|
dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
wm8350->pmic.max_dcdc = WM8350_DCDC_4;
|
|
wm8350->pmic.max_isink = WM8350_ISINK_A;
|
|
|
|
switch (chip_rev) {
|
|
case 0:
|
|
dev_info(wm8350->dev, "WM8351 Rev A\n");
|
|
wm8350->power.rev_g_coeff = 1;
|
|
break;
|
|
|
|
case 1:
|
|
dev_info(wm8350->dev, "WM8351 Rev B\n");
|
|
wm8350->power.rev_g_coeff = 1;
|
|
break;
|
|
|
|
default:
|
|
dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
wm8350->pmic.max_dcdc = WM8350_DCDC_6;
|
|
wm8350->pmic.max_isink = WM8350_ISINK_B;
|
|
|
|
switch (chip_rev) {
|
|
case 0:
|
|
dev_info(wm8350->dev, "WM8352 Rev A\n");
|
|
wm8350->power.rev_g_coeff = 1;
|
|
break;
|
|
|
|
default:
|
|
dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_err(wm8350->dev, "Unknown MASK_REV\n");
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8350_create_cache(wm8350, mask_rev, mode);
|
|
if (ret < 0) {
|
|
dev_err(wm8350->dev, "Failed to create register cache\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&wm8350->auxadc_mutex);
|
|
init_completion(&wm8350->auxadc_done);
|
|
|
|
ret = wm8350_irq_init(wm8350, irq, pdata);
|
|
if (ret < 0)
|
|
goto err_free;
|
|
|
|
if (wm8350->irq_base) {
|
|
ret = request_threaded_irq(wm8350->irq_base +
|
|
WM8350_IRQ_AUXADC_DATARDY,
|
|
NULL, wm8350_auxadc_irq, 0,
|
|
"auxadc", wm8350);
|
|
if (ret < 0)
|
|
dev_warn(wm8350->dev,
|
|
"Failed to request AUXADC IRQ: %d\n", ret);
|
|
}
|
|
|
|
if (pdata && pdata->init) {
|
|
ret = pdata->init(wm8350);
|
|
if (ret != 0) {
|
|
dev_err(wm8350->dev, "Platform init() failed: %d\n",
|
|
ret);
|
|
goto err_irq;
|
|
}
|
|
}
|
|
|
|
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
|
|
|
|
wm8350_client_dev_register(wm8350, "wm8350-codec",
|
|
&(wm8350->codec.pdev));
|
|
wm8350_client_dev_register(wm8350, "wm8350-gpio",
|
|
&(wm8350->gpio.pdev));
|
|
wm8350_client_dev_register(wm8350, "wm8350-hwmon",
|
|
&(wm8350->hwmon.pdev));
|
|
wm8350_client_dev_register(wm8350, "wm8350-power",
|
|
&(wm8350->power.pdev));
|
|
wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
|
|
wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
wm8350_irq_exit(wm8350);
|
|
err_free:
|
|
kfree(wm8350->reg_cache);
|
|
err:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_device_init);
|
|
|
|
void wm8350_device_exit(struct wm8350 *wm8350)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
|
|
platform_device_unregister(wm8350->pmic.led[i].pdev);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
|
|
platform_device_unregister(wm8350->pmic.pdev[i]);
|
|
|
|
platform_device_unregister(wm8350->wdt.pdev);
|
|
platform_device_unregister(wm8350->rtc.pdev);
|
|
platform_device_unregister(wm8350->power.pdev);
|
|
platform_device_unregister(wm8350->hwmon.pdev);
|
|
platform_device_unregister(wm8350->gpio.pdev);
|
|
platform_device_unregister(wm8350->codec.pdev);
|
|
|
|
if (wm8350->irq_base)
|
|
free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
|
|
|
|
wm8350_irq_exit(wm8350);
|
|
|
|
kfree(wm8350->reg_cache);
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8350_device_exit);
|
|
|
|
MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
|
|
MODULE_LICENSE("GPL");
|