linux-stable/drivers/mtd/nand/jz4780_nand.c
Boris Brezillon d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00

416 lines
10 KiB
C

/*
* JZ4780 NAND driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/jz4780-nemc.h>
#include "jz4780_bch.h"
#define DRV_NAME "jz4780-nand"
#define OFFSET_DATA 0x00000000
#define OFFSET_CMD 0x00400000
#define OFFSET_ADDR 0x00800000
/* Command delay when there is no R/B pin. */
#define RB_DELAY_US 100
struct jz4780_nand_cs {
unsigned int bank;
void __iomem *base;
};
struct jz4780_nand_controller {
struct device *dev;
struct jz4780_bch *bch;
struct nand_hw_control controller;
unsigned int num_banks;
struct list_head chips;
int selected;
struct jz4780_nand_cs cs[];
};
struct jz4780_nand_chip {
struct nand_chip chip;
struct list_head chip_list;
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
};
static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
}
static inline struct jz4780_nand_controller *to_jz4780_nand_controller(struct nand_hw_control *ctrl)
{
return container_of(ctrl, struct jz4780_nand_controller, controller);
}
static void jz4780_nand_select_chip(struct mtd_info *mtd, int chipnr)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_nand_cs *cs;
/* Ensure the currently selected chip is deasserted. */
if (chipnr == -1 && nfc->selected >= 0) {
cs = &nfc->cs[nfc->selected];
jz4780_nemc_assert(nfc->dev, cs->bank, false);
}
nfc->selected = chipnr;
}
static void jz4780_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_nand_cs *cs;
if (WARN_ON(nfc->selected < 0))
return;
cs = &nfc->cs[nfc->selected];
jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_ALE)
writeb(cmd, cs->base + OFFSET_ADDR);
else if (ctrl & NAND_CLE)
writeb(cmd, cs->base + OFFSET_CMD);
}
static int jz4780_nand_dev_ready(struct mtd_info *mtd)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
return !gpiod_get_value_cansleep(nand->busy_gpio);
}
static void jz4780_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
nand->reading = (mode == NAND_ECC_READ);
}
static int jz4780_nand_ecc_calculate(struct mtd_info *mtd, const u8 *dat,
u8 *ecc_code)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_bch_params params;
/*
* Don't need to generate the ECC when reading, BCH does it for us as
* part of decoding/correction.
*/
if (nand->reading)
return 0;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
}
static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat,
u8 *read_ecc, u8 *calc_ecc)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_bch_params params;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
}
static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
{
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
int eccbytes;
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
switch (chip->ecc.mode) {
case NAND_ECC_HW:
if (!nfc->bch) {
dev_err(dev, "HW BCH selected, but BCH controller not found\n");
return -ENODEV;
}
chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
chip->ecc.calculate = jz4780_nand_ecc_calculate;
chip->ecc.correct = jz4780_nand_ecc_correct;
/* fall through */
case NAND_ECC_SOFT:
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->bch) ? "hardware BCH" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
case NAND_ECC_NONE:
dev_info(dev, "not using ECC\n");
break;
default:
dev_err(dev, "ECC mode %d not supported\n", chip->ecc.mode);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
if (chip->ecc.mode != NAND_ECC_HW)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
if (eccbytes > mtd->oobsize - 2) {
dev_err(dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
return 0;
}
static int jz4780_nand_init_chip(struct platform_device *pdev,
struct jz4780_nand_controller *nfc,
struct device_node *np,
unsigned int chipnr)
{
struct device *dev = &pdev->dev;
struct jz4780_nand_chip *nand;
struct jz4780_nand_cs *cs;
struct resource *res;
struct nand_chip *chip;
struct mtd_info *mtd;
const __be32 *reg;
int ret = 0;
cs = &nfc->cs[chipnr];
reg = of_get_property(np, "reg", NULL);
if (!reg)
return -EINVAL;
cs->bank = be32_to_cpu(*reg);
jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
cs->base = devm_ioremap_resource(dev, res);
if (IS_ERR(cs->base))
return PTR_ERR(cs->base);
nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
if (!nand)
return -ENOMEM;
nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
if (IS_ERR(nand->busy_gpio)) {
ret = PTR_ERR(nand->busy_gpio);
dev_err(dev, "failed to request busy GPIO: %d\n", ret);
return ret;
} else if (nand->busy_gpio) {
nand->chip.dev_ready = jz4780_nand_dev_ready;
}
nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
if (IS_ERR(nand->wp_gpio)) {
ret = PTR_ERR(nand->wp_gpio);
dev_err(dev, "failed to request WP GPIO: %d\n", ret);
return ret;
}
chip = &nand->chip;
mtd = nand_to_mtd(chip);
mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
cs->bank);
if (!mtd->name)
return -ENOMEM;
mtd->dev.parent = dev;
chip->IO_ADDR_R = cs->base + OFFSET_DATA;
chip->IO_ADDR_W = cs->base + OFFSET_DATA;
chip->chip_delay = RB_DELAY_US;
chip->options = NAND_NO_SUBPAGE_WRITE;
chip->select_chip = jz4780_nand_select_chip;
chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
chip->ecc.mode = NAND_ECC_HW;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
return ret;
ret = jz4780_nand_init_ecc(nand, dev);
if (ret)
return ret;
ret = nand_scan_tail(mtd);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
nand_release(mtd);
return ret;
}
list_add_tail(&nand->chip_list, &nfc->chips);
return 0;
}
static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
{
struct jz4780_nand_chip *chip;
while (!list_empty(&nfc->chips)) {
chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
nand_release(nand_to_mtd(&chip->chip));
list_del(&chip->chip_list);
}
}
static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
int i = 0;
int ret;
int num_chips = of_get_child_count(dev->of_node);
if (num_chips > nfc->num_banks) {
dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
return -EINVAL;
}
for_each_child_of_node(dev->of_node, np) {
ret = jz4780_nand_init_chip(pdev, nfc, np, i);
if (ret) {
jz4780_nand_cleanup_chips(nfc);
return ret;
}
i++;
}
return 0;
}
static int jz4780_nand_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int num_banks;
struct jz4780_nand_controller *nfc;
int ret;
num_banks = jz4780_nemc_num_banks(dev);
if (num_banks == 0) {
dev_err(dev, "no banks found\n");
return -ENODEV;
}
nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
if (!nfc)
return -ENOMEM;
/*
* Check for BCH HW before we call nand_scan_ident, to prevent us from
* having to call it again if the BCH driver returns -EPROBE_DEFER.
*/
nfc->bch = of_jz4780_bch_get(dev->of_node);
if (IS_ERR(nfc->bch))
return PTR_ERR(nfc->bch);
nfc->dev = dev;
nfc->num_banks = num_banks;
nand_hw_control_init(&nfc->controller);
INIT_LIST_HEAD(&nfc->chips);
ret = jz4780_nand_init_chips(nfc, pdev);
if (ret) {
if (nfc->bch)
jz4780_bch_release(nfc->bch);
return ret;
}
platform_set_drvdata(pdev, nfc);
return 0;
}
static int jz4780_nand_remove(struct platform_device *pdev)
{
struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
if (nfc->bch)
jz4780_bch_release(nfc->bch);
jz4780_nand_cleanup_chips(nfc);
return 0;
}
static const struct of_device_id jz4780_nand_dt_match[] = {
{ .compatible = "ingenic,jz4780-nand" },
{},
};
MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
static struct platform_driver jz4780_nand_driver = {
.probe = jz4780_nand_probe,
.remove = jz4780_nand_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(jz4780_nand_dt_match),
},
};
module_platform_driver(jz4780_nand_driver);
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
MODULE_LICENSE("GPL v2");