mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 17:01:14 +00:00
![Jiri Slaby](/assets/img/avatar_default.png)
Add omitted unlock in sm501_unit_power. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
1768 lines
40 KiB
C
1768 lines
40 KiB
C
/* linux/drivers/mfd/sm501.c
|
|
*
|
|
* Copyright (C) 2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* Vincent Sanders <vince@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* SM501 MFD driver
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
#include <linux/sm501.h>
|
|
#include <linux/sm501-regs.h>
|
|
#include <linux/serial_8250.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
struct sm501_device {
|
|
struct list_head list;
|
|
struct platform_device pdev;
|
|
};
|
|
|
|
struct sm501_gpio;
|
|
|
|
#ifdef CONFIG_MFD_SM501_GPIO
|
|
#include <linux/gpio.h>
|
|
|
|
struct sm501_gpio_chip {
|
|
struct gpio_chip gpio;
|
|
struct sm501_gpio *ourgpio; /* to get back to parent. */
|
|
void __iomem *regbase;
|
|
void __iomem *control; /* address of control reg. */
|
|
};
|
|
|
|
struct sm501_gpio {
|
|
struct sm501_gpio_chip low;
|
|
struct sm501_gpio_chip high;
|
|
spinlock_t lock;
|
|
|
|
unsigned int registered : 1;
|
|
void __iomem *regs;
|
|
struct resource *regs_res;
|
|
};
|
|
#else
|
|
struct sm501_gpio {
|
|
/* no gpio support, empty definition for sm501_devdata. */
|
|
};
|
|
#endif
|
|
|
|
struct sm501_devdata {
|
|
spinlock_t reg_lock;
|
|
struct mutex clock_lock;
|
|
struct list_head devices;
|
|
struct sm501_gpio gpio;
|
|
|
|
struct device *dev;
|
|
struct resource *io_res;
|
|
struct resource *mem_res;
|
|
struct resource *regs_claim;
|
|
struct sm501_platdata *platdata;
|
|
|
|
|
|
unsigned int in_suspend;
|
|
unsigned long pm_misc;
|
|
|
|
int unit_power[20];
|
|
unsigned int pdev_id;
|
|
unsigned int irq;
|
|
void __iomem *regs;
|
|
unsigned int rev;
|
|
};
|
|
|
|
|
|
#define MHZ (1000 * 1000)
|
|
|
|
#ifdef DEBUG
|
|
static const unsigned int div_tab[] = {
|
|
[0] = 1,
|
|
[1] = 2,
|
|
[2] = 4,
|
|
[3] = 8,
|
|
[4] = 16,
|
|
[5] = 32,
|
|
[6] = 64,
|
|
[7] = 128,
|
|
[8] = 3,
|
|
[9] = 6,
|
|
[10] = 12,
|
|
[11] = 24,
|
|
[12] = 48,
|
|
[13] = 96,
|
|
[14] = 192,
|
|
[15] = 384,
|
|
[16] = 5,
|
|
[17] = 10,
|
|
[18] = 20,
|
|
[19] = 40,
|
|
[20] = 80,
|
|
[21] = 160,
|
|
[22] = 320,
|
|
[23] = 604,
|
|
};
|
|
|
|
static unsigned long decode_div(unsigned long pll2, unsigned long val,
|
|
unsigned int lshft, unsigned int selbit,
|
|
unsigned long mask)
|
|
{
|
|
if (val & selbit)
|
|
pll2 = 288 * MHZ;
|
|
|
|
return pll2 / div_tab[(val >> lshft) & mask];
|
|
}
|
|
|
|
#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
|
|
|
|
/* sm501_dump_clk
|
|
*
|
|
* Print out the current clock configuration for the device
|
|
*/
|
|
|
|
static void sm501_dump_clk(struct sm501_devdata *sm)
|
|
{
|
|
unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
|
|
unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
|
|
unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
|
|
unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
|
|
unsigned long sdclk0, sdclk1;
|
|
unsigned long pll2 = 0;
|
|
|
|
switch (misct & 0x30) {
|
|
case 0x00:
|
|
pll2 = 336 * MHZ;
|
|
break;
|
|
case 0x10:
|
|
pll2 = 288 * MHZ;
|
|
break;
|
|
case 0x20:
|
|
pll2 = 240 * MHZ;
|
|
break;
|
|
case 0x30:
|
|
pll2 = 192 * MHZ;
|
|
break;
|
|
}
|
|
|
|
sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
|
|
sdclk0 /= div_tab[((misct >> 8) & 0xf)];
|
|
|
|
sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
|
|
sdclk1 /= div_tab[((misct >> 16) & 0xf)];
|
|
|
|
dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
|
|
misct, pm0, pm1);
|
|
|
|
dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
|
|
fmt_freq(pll2), sdclk0, sdclk1);
|
|
|
|
dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
|
|
|
|
dev_dbg(sm->dev, "PM0[%c]: "
|
|
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
|
|
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
|
|
(pmc & 3 ) == 0 ? '*' : '-',
|
|
fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
|
|
fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
|
|
fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
|
|
fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
|
|
|
|
dev_dbg(sm->dev, "PM1[%c]: "
|
|
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
|
|
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
|
|
(pmc & 3 ) == 1 ? '*' : '-',
|
|
fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
|
|
fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
|
|
fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
|
|
fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
|
|
}
|
|
|
|
static void sm501_dump_regs(struct sm501_devdata *sm)
|
|
{
|
|
void __iomem *regs = sm->regs;
|
|
|
|
dev_info(sm->dev, "System Control %08x\n",
|
|
readl(regs + SM501_SYSTEM_CONTROL));
|
|
dev_info(sm->dev, "Misc Control %08x\n",
|
|
readl(regs + SM501_MISC_CONTROL));
|
|
dev_info(sm->dev, "GPIO Control Low %08x\n",
|
|
readl(regs + SM501_GPIO31_0_CONTROL));
|
|
dev_info(sm->dev, "GPIO Control Hi %08x\n",
|
|
readl(regs + SM501_GPIO63_32_CONTROL));
|
|
dev_info(sm->dev, "DRAM Control %08x\n",
|
|
readl(regs + SM501_DRAM_CONTROL));
|
|
dev_info(sm->dev, "Arbitration Ctrl %08x\n",
|
|
readl(regs + SM501_ARBTRTN_CONTROL));
|
|
dev_info(sm->dev, "Misc Timing %08x\n",
|
|
readl(regs + SM501_MISC_TIMING));
|
|
}
|
|
|
|
static void sm501_dump_gate(struct sm501_devdata *sm)
|
|
{
|
|
dev_info(sm->dev, "CurrentGate %08x\n",
|
|
readl(sm->regs + SM501_CURRENT_GATE));
|
|
dev_info(sm->dev, "CurrentClock %08x\n",
|
|
readl(sm->regs + SM501_CURRENT_CLOCK));
|
|
dev_info(sm->dev, "PowerModeControl %08x\n",
|
|
readl(sm->regs + SM501_POWER_MODE_CONTROL));
|
|
}
|
|
|
|
#else
|
|
static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
|
|
static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
|
|
static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
|
|
#endif
|
|
|
|
/* sm501_sync_regs
|
|
*
|
|
* ensure the
|
|
*/
|
|
|
|
static void sm501_sync_regs(struct sm501_devdata *sm)
|
|
{
|
|
readl(sm->regs);
|
|
}
|
|
|
|
static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
|
|
{
|
|
/* during suspend/resume, we are currently not allowed to sleep,
|
|
* so change to using mdelay() instead of msleep() if we
|
|
* are in one of these paths */
|
|
|
|
if (sm->in_suspend)
|
|
mdelay(delay);
|
|
else
|
|
msleep(delay);
|
|
}
|
|
|
|
/* sm501_misc_control
|
|
*
|
|
* alters the miscellaneous control parameters
|
|
*/
|
|
|
|
int sm501_misc_control(struct device *dev,
|
|
unsigned long set, unsigned long clear)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev);
|
|
unsigned long misc;
|
|
unsigned long save;
|
|
unsigned long to;
|
|
|
|
spin_lock_irqsave(&sm->reg_lock, save);
|
|
|
|
misc = readl(sm->regs + SM501_MISC_CONTROL);
|
|
to = (misc & ~clear) | set;
|
|
|
|
if (to != misc) {
|
|
writel(to, sm->regs + SM501_MISC_CONTROL);
|
|
sm501_sync_regs(sm);
|
|
|
|
dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sm->reg_lock, save);
|
|
return to;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sm501_misc_control);
|
|
|
|
/* sm501_modify_reg
|
|
*
|
|
* Modify a register in the SM501 which may be shared with other
|
|
* drivers.
|
|
*/
|
|
|
|
unsigned long sm501_modify_reg(struct device *dev,
|
|
unsigned long reg,
|
|
unsigned long set,
|
|
unsigned long clear)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev);
|
|
unsigned long data;
|
|
unsigned long save;
|
|
|
|
spin_lock_irqsave(&sm->reg_lock, save);
|
|
|
|
data = readl(sm->regs + reg);
|
|
data |= set;
|
|
data &= ~clear;
|
|
|
|
writel(data, sm->regs + reg);
|
|
sm501_sync_regs(sm);
|
|
|
|
spin_unlock_irqrestore(&sm->reg_lock, save);
|
|
|
|
return data;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sm501_modify_reg);
|
|
|
|
/* sm501_unit_power
|
|
*
|
|
* alters the power active gate to set specific units on or off
|
|
*/
|
|
|
|
int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev);
|
|
unsigned long mode;
|
|
unsigned long gate;
|
|
unsigned long clock;
|
|
|
|
mutex_lock(&sm->clock_lock);
|
|
|
|
mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
|
|
gate = readl(sm->regs + SM501_CURRENT_GATE);
|
|
clock = readl(sm->regs + SM501_CURRENT_CLOCK);
|
|
|
|
mode &= 3; /* get current power mode */
|
|
|
|
if (unit >= ARRAY_SIZE(sm->unit_power)) {
|
|
dev_err(dev, "%s: bad unit %d\n", __func__, unit);
|
|
goto already;
|
|
}
|
|
|
|
dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
|
|
sm->unit_power[unit], to);
|
|
|
|
if (to == 0 && sm->unit_power[unit] == 0) {
|
|
dev_err(sm->dev, "unit %d is already shutdown\n", unit);
|
|
goto already;
|
|
}
|
|
|
|
sm->unit_power[unit] += to ? 1 : -1;
|
|
to = sm->unit_power[unit] ? 1 : 0;
|
|
|
|
if (to) {
|
|
if (gate & (1 << unit))
|
|
goto already;
|
|
gate |= (1 << unit);
|
|
} else {
|
|
if (!(gate & (1 << unit)))
|
|
goto already;
|
|
gate &= ~(1 << unit);
|
|
}
|
|
|
|
switch (mode) {
|
|
case 1:
|
|
writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
|
|
writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
|
|
mode = 0;
|
|
break;
|
|
case 2:
|
|
case 0:
|
|
writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
|
|
writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
|
|
mode = 1;
|
|
break;
|
|
|
|
default:
|
|
gate = -1;
|
|
goto already;
|
|
}
|
|
|
|
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
|
|
sm501_sync_regs(sm);
|
|
|
|
dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
|
|
gate, clock, mode);
|
|
|
|
sm501_mdelay(sm, 16);
|
|
|
|
already:
|
|
mutex_unlock(&sm->clock_lock);
|
|
return gate;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sm501_unit_power);
|
|
|
|
|
|
/* Perform a rounded division. */
|
|
static long sm501fb_round_div(long num, long denom)
|
|
{
|
|
/* n / d + 1 / 2 = (2n + d) / 2d */
|
|
return (2 * num + denom) / (2 * denom);
|
|
}
|
|
|
|
/* clock value structure. */
|
|
struct sm501_clock {
|
|
unsigned long mclk;
|
|
int divider;
|
|
int shift;
|
|
unsigned int m, n, k;
|
|
};
|
|
|
|
/* sm501_calc_clock
|
|
*
|
|
* Calculates the nearest discrete clock frequency that
|
|
* can be achieved with the specified input clock.
|
|
* the maximum divisor is 3 or 5
|
|
*/
|
|
|
|
static int sm501_calc_clock(unsigned long freq,
|
|
struct sm501_clock *clock,
|
|
int max_div,
|
|
unsigned long mclk,
|
|
long *best_diff)
|
|
{
|
|
int ret = 0;
|
|
int divider;
|
|
int shift;
|
|
long diff;
|
|
|
|
/* try dividers 1 and 3 for CRT and for panel,
|
|
try divider 5 for panel only.*/
|
|
|
|
for (divider = 1; divider <= max_div; divider += 2) {
|
|
/* try all 8 shift values.*/
|
|
for (shift = 0; shift < 8; shift++) {
|
|
/* Calculate difference to requested clock */
|
|
diff = sm501fb_round_div(mclk, divider << shift) - freq;
|
|
if (diff < 0)
|
|
diff = -diff;
|
|
|
|
/* If it is less than the current, use it */
|
|
if (diff < *best_diff) {
|
|
*best_diff = diff;
|
|
|
|
clock->mclk = mclk;
|
|
clock->divider = divider;
|
|
clock->shift = shift;
|
|
ret = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* sm501_calc_pll
|
|
*
|
|
* Calculates the nearest discrete clock frequency that can be
|
|
* achieved using the programmable PLL.
|
|
* the maximum divisor is 3 or 5
|
|
*/
|
|
|
|
static unsigned long sm501_calc_pll(unsigned long freq,
|
|
struct sm501_clock *clock,
|
|
int max_div)
|
|
{
|
|
unsigned long mclk;
|
|
unsigned int m, n, k;
|
|
long best_diff = 999999999;
|
|
|
|
/*
|
|
* The SM502 datasheet doesn't specify the min/max values for M and N.
|
|
* N = 1 at least doesn't work in practice.
|
|
*/
|
|
for (m = 2; m <= 255; m++) {
|
|
for (n = 2; n <= 127; n++) {
|
|
for (k = 0; k <= 1; k++) {
|
|
mclk = (24000000UL * m / n) >> k;
|
|
|
|
if (sm501_calc_clock(freq, clock, max_div,
|
|
mclk, &best_diff)) {
|
|
clock->m = m;
|
|
clock->n = n;
|
|
clock->k = k;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Return best clock. */
|
|
return clock->mclk / (clock->divider << clock->shift);
|
|
}
|
|
|
|
/* sm501_select_clock
|
|
*
|
|
* Calculates the nearest discrete clock frequency that can be
|
|
* achieved using the 288MHz and 336MHz PLLs.
|
|
* the maximum divisor is 3 or 5
|
|
*/
|
|
|
|
static unsigned long sm501_select_clock(unsigned long freq,
|
|
struct sm501_clock *clock,
|
|
int max_div)
|
|
{
|
|
unsigned long mclk;
|
|
long best_diff = 999999999;
|
|
|
|
/* Try 288MHz and 336MHz clocks. */
|
|
for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
|
|
sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
|
|
}
|
|
|
|
/* Return best clock. */
|
|
return clock->mclk / (clock->divider << clock->shift);
|
|
}
|
|
|
|
/* sm501_set_clock
|
|
*
|
|
* set one of the four clock sources to the closest available frequency to
|
|
* the one specified
|
|
*/
|
|
|
|
unsigned long sm501_set_clock(struct device *dev,
|
|
int clksrc,
|
|
unsigned long req_freq)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev);
|
|
unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
|
|
unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
|
|
unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
|
|
unsigned char reg;
|
|
unsigned int pll_reg = 0;
|
|
unsigned long sm501_freq; /* the actual frequency acheived */
|
|
|
|
struct sm501_clock to;
|
|
|
|
/* find achivable discrete frequency and setup register value
|
|
* accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
|
|
* has an extra bit for the divider */
|
|
|
|
switch (clksrc) {
|
|
case SM501_CLOCK_P2XCLK:
|
|
/* This clock is divided in half so to achive the
|
|
* requested frequency the value must be multiplied by
|
|
* 2. This clock also has an additional pre divisor */
|
|
|
|
if (sm->rev >= 0xC0) {
|
|
/* SM502 -> use the programmable PLL */
|
|
sm501_freq = (sm501_calc_pll(2 * req_freq,
|
|
&to, 5) / 2);
|
|
reg = to.shift & 0x07;/* bottom 3 bits are shift */
|
|
if (to.divider == 3)
|
|
reg |= 0x08; /* /3 divider required */
|
|
else if (to.divider == 5)
|
|
reg |= 0x10; /* /5 divider required */
|
|
reg |= 0x40; /* select the programmable PLL */
|
|
pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
|
|
} else {
|
|
sm501_freq = (sm501_select_clock(2 * req_freq,
|
|
&to, 5) / 2);
|
|
reg = to.shift & 0x07;/* bottom 3 bits are shift */
|
|
if (to.divider == 3)
|
|
reg |= 0x08; /* /3 divider required */
|
|
else if (to.divider == 5)
|
|
reg |= 0x10; /* /5 divider required */
|
|
if (to.mclk != 288000000)
|
|
reg |= 0x20; /* which mclk pll is source */
|
|
}
|
|
break;
|
|
|
|
case SM501_CLOCK_V2XCLK:
|
|
/* This clock is divided in half so to achive the
|
|
* requested frequency the value must be multiplied by 2. */
|
|
|
|
sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
|
|
reg=to.shift & 0x07; /* bottom 3 bits are shift */
|
|
if (to.divider == 3)
|
|
reg |= 0x08; /* /3 divider required */
|
|
if (to.mclk != 288000000)
|
|
reg |= 0x10; /* which mclk pll is source */
|
|
break;
|
|
|
|
case SM501_CLOCK_MCLK:
|
|
case SM501_CLOCK_M1XCLK:
|
|
/* These clocks are the same and not further divided */
|
|
|
|
sm501_freq = sm501_select_clock( req_freq, &to, 3);
|
|
reg=to.shift & 0x07; /* bottom 3 bits are shift */
|
|
if (to.divider == 3)
|
|
reg |= 0x08; /* /3 divider required */
|
|
if (to.mclk != 288000000)
|
|
reg |= 0x10; /* which mclk pll is source */
|
|
break;
|
|
|
|
default:
|
|
return 0; /* this is bad */
|
|
}
|
|
|
|
mutex_lock(&sm->clock_lock);
|
|
|
|
mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
|
|
gate = readl(sm->regs + SM501_CURRENT_GATE);
|
|
clock = readl(sm->regs + SM501_CURRENT_CLOCK);
|
|
|
|
clock = clock & ~(0xFF << clksrc);
|
|
clock |= reg<<clksrc;
|
|
|
|
mode &= 3; /* find current mode */
|
|
|
|
switch (mode) {
|
|
case 1:
|
|
writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
|
|
writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
|
|
mode = 0;
|
|
break;
|
|
case 2:
|
|
case 0:
|
|
writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
|
|
writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
|
|
mode = 1;
|
|
break;
|
|
|
|
default:
|
|
mutex_unlock(&sm->clock_lock);
|
|
return -1;
|
|
}
|
|
|
|
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
|
|
|
|
if (pll_reg)
|
|
writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
|
|
|
|
sm501_sync_regs(sm);
|
|
|
|
dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
|
|
gate, clock, mode);
|
|
|
|
sm501_mdelay(sm, 16);
|
|
mutex_unlock(&sm->clock_lock);
|
|
|
|
sm501_dump_clk(sm);
|
|
|
|
return sm501_freq;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sm501_set_clock);
|
|
|
|
/* sm501_find_clock
|
|
*
|
|
* finds the closest available frequency for a given clock
|
|
*/
|
|
|
|
unsigned long sm501_find_clock(struct device *dev,
|
|
int clksrc,
|
|
unsigned long req_freq)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev);
|
|
unsigned long sm501_freq; /* the frequency achiveable by the 501 */
|
|
struct sm501_clock to;
|
|
|
|
switch (clksrc) {
|
|
case SM501_CLOCK_P2XCLK:
|
|
if (sm->rev >= 0xC0) {
|
|
/* SM502 -> use the programmable PLL */
|
|
sm501_freq = (sm501_calc_pll(2 * req_freq,
|
|
&to, 5) / 2);
|
|
} else {
|
|
sm501_freq = (sm501_select_clock(2 * req_freq,
|
|
&to, 5) / 2);
|
|
}
|
|
break;
|
|
|
|
case SM501_CLOCK_V2XCLK:
|
|
sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
|
|
break;
|
|
|
|
case SM501_CLOCK_MCLK:
|
|
case SM501_CLOCK_M1XCLK:
|
|
sm501_freq = sm501_select_clock(req_freq, &to, 3);
|
|
break;
|
|
|
|
default:
|
|
sm501_freq = 0; /* error */
|
|
}
|
|
|
|
return sm501_freq;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(sm501_find_clock);
|
|
|
|
static struct sm501_device *to_sm_device(struct platform_device *pdev)
|
|
{
|
|
return container_of(pdev, struct sm501_device, pdev);
|
|
}
|
|
|
|
/* sm501_device_release
|
|
*
|
|
* A release function for the platform devices we create to allow us to
|
|
* free any items we allocated
|
|
*/
|
|
|
|
static void sm501_device_release(struct device *dev)
|
|
{
|
|
kfree(to_sm_device(to_platform_device(dev)));
|
|
}
|
|
|
|
/* sm501_create_subdev
|
|
*
|
|
* Create a skeleton platform device with resources for passing to a
|
|
* sub-driver
|
|
*/
|
|
|
|
static struct platform_device *
|
|
sm501_create_subdev(struct sm501_devdata *sm, char *name,
|
|
unsigned int res_count, unsigned int platform_data_size)
|
|
{
|
|
struct sm501_device *smdev;
|
|
|
|
smdev = kzalloc(sizeof(struct sm501_device) +
|
|
(sizeof(struct resource) * res_count) +
|
|
platform_data_size, GFP_KERNEL);
|
|
if (!smdev)
|
|
return NULL;
|
|
|
|
smdev->pdev.dev.release = sm501_device_release;
|
|
|
|
smdev->pdev.name = name;
|
|
smdev->pdev.id = sm->pdev_id;
|
|
smdev->pdev.dev.parent = sm->dev;
|
|
|
|
if (res_count) {
|
|
smdev->pdev.resource = (struct resource *)(smdev+1);
|
|
smdev->pdev.num_resources = res_count;
|
|
}
|
|
if (platform_data_size)
|
|
smdev->pdev.dev.platform_data = (void *)(smdev+1);
|
|
|
|
return &smdev->pdev;
|
|
}
|
|
|
|
/* sm501_register_device
|
|
*
|
|
* Register a platform device created with sm501_create_subdev()
|
|
*/
|
|
|
|
static int sm501_register_device(struct sm501_devdata *sm,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct sm501_device *smdev = to_sm_device(pdev);
|
|
int ptr;
|
|
int ret;
|
|
|
|
for (ptr = 0; ptr < pdev->num_resources; ptr++) {
|
|
printk(KERN_DEBUG "%s[%d] flags %08lx: %08llx..%08llx\n",
|
|
pdev->name, ptr,
|
|
pdev->resource[ptr].flags,
|
|
(unsigned long long)pdev->resource[ptr].start,
|
|
(unsigned long long)pdev->resource[ptr].end);
|
|
}
|
|
|
|
ret = platform_device_register(pdev);
|
|
|
|
if (ret >= 0) {
|
|
dev_dbg(sm->dev, "registered %s\n", pdev->name);
|
|
list_add_tail(&smdev->list, &sm->devices);
|
|
} else
|
|
dev_err(sm->dev, "error registering %s (%d)\n",
|
|
pdev->name, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* sm501_create_subio
|
|
*
|
|
* Fill in an IO resource for a sub device
|
|
*/
|
|
|
|
static void sm501_create_subio(struct sm501_devdata *sm,
|
|
struct resource *res,
|
|
resource_size_t offs,
|
|
resource_size_t size)
|
|
{
|
|
res->flags = IORESOURCE_MEM;
|
|
res->parent = sm->io_res;
|
|
res->start = sm->io_res->start + offs;
|
|
res->end = res->start + size - 1;
|
|
}
|
|
|
|
/* sm501_create_mem
|
|
*
|
|
* Fill in an MEM resource for a sub device
|
|
*/
|
|
|
|
static void sm501_create_mem(struct sm501_devdata *sm,
|
|
struct resource *res,
|
|
resource_size_t *offs,
|
|
resource_size_t size)
|
|
{
|
|
*offs -= size; /* adjust memory size */
|
|
|
|
res->flags = IORESOURCE_MEM;
|
|
res->parent = sm->mem_res;
|
|
res->start = sm->mem_res->start + *offs;
|
|
res->end = res->start + size - 1;
|
|
}
|
|
|
|
/* sm501_create_irq
|
|
*
|
|
* Fill in an IRQ resource for a sub device
|
|
*/
|
|
|
|
static void sm501_create_irq(struct sm501_devdata *sm,
|
|
struct resource *res)
|
|
{
|
|
res->flags = IORESOURCE_IRQ;
|
|
res->parent = NULL;
|
|
res->start = res->end = sm->irq;
|
|
}
|
|
|
|
static int sm501_register_usbhost(struct sm501_devdata *sm,
|
|
resource_size_t *mem_avail)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
|
|
if (!pdev)
|
|
return -ENOMEM;
|
|
|
|
sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
|
|
sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
|
|
sm501_create_irq(sm, &pdev->resource[2]);
|
|
|
|
return sm501_register_device(sm, pdev);
|
|
}
|
|
|
|
static void sm501_setup_uart_data(struct sm501_devdata *sm,
|
|
struct plat_serial8250_port *uart_data,
|
|
unsigned int offset)
|
|
{
|
|
uart_data->membase = sm->regs + offset;
|
|
uart_data->mapbase = sm->io_res->start + offset;
|
|
uart_data->iotype = UPIO_MEM;
|
|
uart_data->irq = sm->irq;
|
|
uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
|
|
uart_data->regshift = 2;
|
|
uart_data->uartclk = (9600 * 16);
|
|
}
|
|
|
|
static int sm501_register_uart(struct sm501_devdata *sm, int devices)
|
|
{
|
|
struct platform_device *pdev;
|
|
struct plat_serial8250_port *uart_data;
|
|
|
|
pdev = sm501_create_subdev(sm, "serial8250", 0,
|
|
sizeof(struct plat_serial8250_port) * 3);
|
|
if (!pdev)
|
|
return -ENOMEM;
|
|
|
|
uart_data = pdev->dev.platform_data;
|
|
|
|
if (devices & SM501_USE_UART0) {
|
|
sm501_setup_uart_data(sm, uart_data++, 0x30000);
|
|
sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
|
|
sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
|
|
sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
|
|
}
|
|
if (devices & SM501_USE_UART1) {
|
|
sm501_setup_uart_data(sm, uart_data++, 0x30020);
|
|
sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
|
|
sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
|
|
sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
|
|
}
|
|
|
|
pdev->id = PLAT8250_DEV_SM501;
|
|
|
|
return sm501_register_device(sm, pdev);
|
|
}
|
|
|
|
static int sm501_register_display(struct sm501_devdata *sm,
|
|
resource_size_t *mem_avail)
|
|
{
|
|
struct platform_device *pdev;
|
|
|
|
pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
|
|
if (!pdev)
|
|
return -ENOMEM;
|
|
|
|
sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
|
|
sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
|
|
sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
|
|
sm501_create_irq(sm, &pdev->resource[3]);
|
|
|
|
return sm501_register_device(sm, pdev);
|
|
}
|
|
|
|
#ifdef CONFIG_MFD_SM501_GPIO
|
|
|
|
static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
|
|
{
|
|
return container_of(gc, struct sm501_gpio_chip, gpio);
|
|
}
|
|
|
|
static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
|
|
{
|
|
return container_of(gpio, struct sm501_devdata, gpio);
|
|
}
|
|
|
|
static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
|
struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
|
|
unsigned long result;
|
|
|
|
result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
|
|
result >>= offset;
|
|
|
|
return result & 1UL;
|
|
}
|
|
|
|
static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
|
|
unsigned long bit)
|
|
{
|
|
unsigned long ctrl;
|
|
|
|
/* check and modify if this pin is not set as gpio. */
|
|
|
|
if (readl(smchip->control) & bit) {
|
|
dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
|
|
"changing mode of gpio, bit %08lx\n", bit);
|
|
|
|
ctrl = readl(smchip->control);
|
|
ctrl &= ~bit;
|
|
writel(ctrl, smchip->control);
|
|
|
|
sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
|
|
}
|
|
}
|
|
|
|
static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
|
|
{
|
|
struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
|
|
struct sm501_gpio *smgpio = smchip->ourgpio;
|
|
unsigned long bit = 1 << offset;
|
|
void __iomem *regs = smchip->regbase;
|
|
unsigned long save;
|
|
unsigned long val;
|
|
|
|
dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
|
|
__func__, chip, offset);
|
|
|
|
spin_lock_irqsave(&smgpio->lock, save);
|
|
|
|
val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
|
|
if (value)
|
|
val |= bit;
|
|
writel(val, regs);
|
|
|
|
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
|
|
sm501_gpio_ensure_gpio(smchip, bit);
|
|
|
|
spin_unlock_irqrestore(&smgpio->lock, save);
|
|
}
|
|
|
|
static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
|
|
struct sm501_gpio *smgpio = smchip->ourgpio;
|
|
void __iomem *regs = smchip->regbase;
|
|
unsigned long bit = 1 << offset;
|
|
unsigned long save;
|
|
unsigned long ddr;
|
|
|
|
dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
|
|
__func__, chip, offset);
|
|
|
|
spin_lock_irqsave(&smgpio->lock, save);
|
|
|
|
ddr = readl(regs + SM501_GPIO_DDR_LOW);
|
|
writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
|
|
|
|
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
|
|
sm501_gpio_ensure_gpio(smchip, bit);
|
|
|
|
spin_unlock_irqrestore(&smgpio->lock, save);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm501_gpio_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
|
|
struct sm501_gpio *smgpio = smchip->ourgpio;
|
|
unsigned long bit = 1 << offset;
|
|
void __iomem *regs = smchip->regbase;
|
|
unsigned long save;
|
|
unsigned long val;
|
|
unsigned long ddr;
|
|
|
|
dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
|
|
__func__, chip, offset, value);
|
|
|
|
spin_lock_irqsave(&smgpio->lock, save);
|
|
|
|
val = readl(regs + SM501_GPIO_DATA_LOW);
|
|
if (value)
|
|
val |= bit;
|
|
else
|
|
val &= ~bit;
|
|
writel(val, regs);
|
|
|
|
ddr = readl(regs + SM501_GPIO_DDR_LOW);
|
|
writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
|
|
|
|
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
|
|
writel(val, regs + SM501_GPIO_DATA_LOW);
|
|
|
|
sm501_sync_regs(sm501_gpio_to_dev(smgpio));
|
|
spin_unlock_irqrestore(&smgpio->lock, save);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct gpio_chip gpio_chip_template = {
|
|
.ngpio = 32,
|
|
.direction_input = sm501_gpio_input,
|
|
.direction_output = sm501_gpio_output,
|
|
.set = sm501_gpio_set,
|
|
.get = sm501_gpio_get,
|
|
};
|
|
|
|
static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
|
|
struct sm501_gpio *gpio,
|
|
struct sm501_gpio_chip *chip)
|
|
{
|
|
struct sm501_platdata *pdata = sm->platdata;
|
|
struct gpio_chip *gchip = &chip->gpio;
|
|
int base = pdata->gpio_base;
|
|
|
|
chip->gpio = gpio_chip_template;
|
|
|
|
if (chip == &gpio->high) {
|
|
if (base > 0)
|
|
base += 32;
|
|
chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
|
|
chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
|
|
gchip->label = "SM501-HIGH";
|
|
} else {
|
|
chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
|
|
chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
|
|
gchip->label = "SM501-LOW";
|
|
}
|
|
|
|
gchip->base = base;
|
|
chip->ourgpio = gpio;
|
|
|
|
return gpiochip_add(gchip);
|
|
}
|
|
|
|
static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
|
|
{
|
|
struct sm501_gpio *gpio = &sm->gpio;
|
|
resource_size_t iobase = sm->io_res->start + SM501_GPIO;
|
|
int ret;
|
|
int tmp;
|
|
|
|
dev_dbg(sm->dev, "registering gpio block %08llx\n",
|
|
(unsigned long long)iobase);
|
|
|
|
spin_lock_init(&gpio->lock);
|
|
|
|
gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
|
|
if (gpio->regs_res == NULL) {
|
|
dev_err(sm->dev, "gpio: failed to request region\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
gpio->regs = ioremap(iobase, 0x20);
|
|
if (gpio->regs == NULL) {
|
|
dev_err(sm->dev, "gpio: failed to remap registers\n");
|
|
ret = -ENXIO;
|
|
goto err_claimed;
|
|
}
|
|
|
|
/* Register both our chips. */
|
|
|
|
ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
|
|
if (ret) {
|
|
dev_err(sm->dev, "failed to add low chip\n");
|
|
goto err_mapped;
|
|
}
|
|
|
|
ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
|
|
if (ret) {
|
|
dev_err(sm->dev, "failed to add high chip\n");
|
|
goto err_low_chip;
|
|
}
|
|
|
|
gpio->registered = 1;
|
|
|
|
return 0;
|
|
|
|
err_low_chip:
|
|
tmp = gpiochip_remove(&gpio->low.gpio);
|
|
if (tmp) {
|
|
dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
|
|
return ret;
|
|
}
|
|
|
|
err_mapped:
|
|
iounmap(gpio->regs);
|
|
|
|
err_claimed:
|
|
release_resource(gpio->regs_res);
|
|
kfree(gpio->regs_res);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sm501_gpio_remove(struct sm501_devdata *sm)
|
|
{
|
|
struct sm501_gpio *gpio = &sm->gpio;
|
|
int ret;
|
|
|
|
if (!sm->gpio.registered)
|
|
return;
|
|
|
|
ret = gpiochip_remove(&gpio->low.gpio);
|
|
if (ret)
|
|
dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
|
|
|
|
ret = gpiochip_remove(&gpio->high.gpio);
|
|
if (ret)
|
|
dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
|
|
|
|
iounmap(gpio->regs);
|
|
release_resource(gpio->regs_res);
|
|
kfree(gpio->regs_res);
|
|
}
|
|
|
|
static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
|
|
{
|
|
struct sm501_gpio *gpio = &sm->gpio;
|
|
int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
|
|
|
|
return (pin % 32) + base;
|
|
}
|
|
|
|
static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
|
|
{
|
|
return sm->gpio.registered;
|
|
}
|
|
#else
|
|
static inline int sm501_register_gpio(struct sm501_devdata *sm)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void sm501_gpio_remove(struct sm501_devdata *sm)
|
|
{
|
|
}
|
|
|
|
static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
|
|
struct sm501_platdata_gpio_i2c *iic)
|
|
{
|
|
struct i2c_gpio_platform_data *icd;
|
|
struct platform_device *pdev;
|
|
|
|
pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
|
|
sizeof(struct i2c_gpio_platform_data));
|
|
if (!pdev)
|
|
return -ENOMEM;
|
|
|
|
icd = pdev->dev.platform_data;
|
|
|
|
/* We keep the pin_sda and pin_scl fields relative in case the
|
|
* same platform data is passed to >1 SM501.
|
|
*/
|
|
|
|
icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
|
|
icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
|
|
icd->timeout = iic->timeout;
|
|
icd->udelay = iic->udelay;
|
|
|
|
/* note, we can't use either of the pin numbers, as the i2c-gpio
|
|
* driver uses the platform.id field to generate the bus number
|
|
* to register with the i2c core; The i2c core doesn't have enough
|
|
* entries to deal with anything we currently use.
|
|
*/
|
|
|
|
pdev->id = iic->bus_num;
|
|
|
|
dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
|
|
iic->bus_num,
|
|
icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
|
|
|
|
return sm501_register_device(sm, pdev);
|
|
}
|
|
|
|
static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
|
|
struct sm501_platdata *pdata)
|
|
{
|
|
struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
|
|
int index;
|
|
int ret;
|
|
|
|
for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
|
|
ret = sm501_register_gpio_i2c_instance(sm, iic);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* sm501_dbg_regs
|
|
*
|
|
* Debug attribute to attach to parent device to show core registers
|
|
*/
|
|
|
|
static ssize_t sm501_dbg_regs(struct device *dev,
|
|
struct device_attribute *attr, char *buff)
|
|
{
|
|
struct sm501_devdata *sm = dev_get_drvdata(dev) ;
|
|
unsigned int reg;
|
|
char *ptr = buff;
|
|
int ret;
|
|
|
|
for (reg = 0x00; reg < 0x70; reg += 4) {
|
|
ret = sprintf(ptr, "%08x = %08x\n",
|
|
reg, readl(sm->regs + reg));
|
|
ptr += ret;
|
|
}
|
|
|
|
return ptr - buff;
|
|
}
|
|
|
|
|
|
static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
|
|
|
|
/* sm501_init_reg
|
|
*
|
|
* Helper function for the init code to setup a register
|
|
*
|
|
* clear the bits which are set in r->mask, and then set
|
|
* the bits set in r->set.
|
|
*/
|
|
|
|
static inline void sm501_init_reg(struct sm501_devdata *sm,
|
|
unsigned long reg,
|
|
struct sm501_reg_init *r)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(sm->regs + reg);
|
|
tmp &= ~r->mask;
|
|
tmp |= r->set;
|
|
writel(tmp, sm->regs + reg);
|
|
}
|
|
|
|
/* sm501_init_regs
|
|
*
|
|
* Setup core register values
|
|
*/
|
|
|
|
static void sm501_init_regs(struct sm501_devdata *sm,
|
|
struct sm501_initdata *init)
|
|
{
|
|
sm501_misc_control(sm->dev,
|
|
init->misc_control.set,
|
|
init->misc_control.mask);
|
|
|
|
sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
|
|
sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
|
|
sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
|
|
|
|
if (init->m1xclk) {
|
|
dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
|
|
sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
|
|
}
|
|
|
|
if (init->mclk) {
|
|
dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
|
|
sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
|
|
}
|
|
|
|
}
|
|
|
|
/* Check the PLL sources for the M1CLK and M1XCLK
|
|
*
|
|
* If the M1CLK and M1XCLKs are not sourced from the same PLL, then
|
|
* there is a risk (see errata AB-5) that the SM501 will cease proper
|
|
* function. If this happens, then it is likely the SM501 will
|
|
* hang the system.
|
|
*/
|
|
|
|
static int sm501_check_clocks(struct sm501_devdata *sm)
|
|
{
|
|
unsigned long pwrmode = readl(sm->regs + SM501_CURRENT_CLOCK);
|
|
unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
|
|
unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
|
|
|
|
return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
|
|
}
|
|
|
|
static unsigned int sm501_mem_local[] = {
|
|
[0] = 4*1024*1024,
|
|
[1] = 8*1024*1024,
|
|
[2] = 16*1024*1024,
|
|
[3] = 32*1024*1024,
|
|
[4] = 64*1024*1024,
|
|
[5] = 2*1024*1024,
|
|
};
|
|
|
|
/* sm501_init_dev
|
|
*
|
|
* Common init code for an SM501
|
|
*/
|
|
|
|
static int __devinit sm501_init_dev(struct sm501_devdata *sm)
|
|
{
|
|
struct sm501_initdata *idata;
|
|
struct sm501_platdata *pdata;
|
|
resource_size_t mem_avail;
|
|
unsigned long dramctrl;
|
|
unsigned long devid;
|
|
int ret;
|
|
|
|
mutex_init(&sm->clock_lock);
|
|
spin_lock_init(&sm->reg_lock);
|
|
|
|
INIT_LIST_HEAD(&sm->devices);
|
|
|
|
devid = readl(sm->regs + SM501_DEVICEID);
|
|
|
|
if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
|
|
dev_err(sm->dev, "incorrect device id %08lx\n", devid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* disable irqs */
|
|
writel(0, sm->regs + SM501_IRQ_MASK);
|
|
|
|
dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
|
|
mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
|
|
|
|
dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
|
|
sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
|
|
|
|
sm->rev = devid & SM501_DEVICEID_REVMASK;
|
|
|
|
sm501_dump_gate(sm);
|
|
|
|
ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
|
|
if (ret)
|
|
dev_err(sm->dev, "failed to create debug regs file\n");
|
|
|
|
sm501_dump_clk(sm);
|
|
|
|
/* check to see if we have some device initialisation */
|
|
|
|
pdata = sm->platdata;
|
|
idata = pdata ? pdata->init : NULL;
|
|
|
|
if (idata) {
|
|
sm501_init_regs(sm, idata);
|
|
|
|
if (idata->devices & SM501_USE_USB_HOST)
|
|
sm501_register_usbhost(sm, &mem_avail);
|
|
if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
|
|
sm501_register_uart(sm, idata->devices);
|
|
if (idata->devices & SM501_USE_GPIO)
|
|
sm501_register_gpio(sm);
|
|
}
|
|
|
|
if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
|
|
if (!sm501_gpio_isregistered(sm))
|
|
dev_err(sm->dev, "no gpio available for i2c gpio.\n");
|
|
else
|
|
sm501_register_gpio_i2c(sm, pdata);
|
|
}
|
|
|
|
ret = sm501_check_clocks(sm);
|
|
if (ret) {
|
|
dev_err(sm->dev, "M1X and M clocks sourced from different "
|
|
"PLLs\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* always create a framebuffer */
|
|
sm501_register_display(sm, &mem_avail);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit sm501_plat_probe(struct platform_device *dev)
|
|
{
|
|
struct sm501_devdata *sm;
|
|
int ret;
|
|
|
|
sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
|
|
if (sm == NULL) {
|
|
dev_err(&dev->dev, "no memory for device data\n");
|
|
ret = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
sm->dev = &dev->dev;
|
|
sm->pdev_id = dev->id;
|
|
sm->platdata = dev->dev.platform_data;
|
|
|
|
ret = platform_get_irq(dev, 0);
|
|
if (ret < 0) {
|
|
dev_err(&dev->dev, "failed to get irq resource\n");
|
|
goto err_res;
|
|
}
|
|
sm->irq = ret;
|
|
|
|
sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
|
|
sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (sm->io_res == NULL || sm->mem_res == NULL) {
|
|
dev_err(&dev->dev, "failed to get IO resource\n");
|
|
ret = -ENOENT;
|
|
goto err_res;
|
|
}
|
|
|
|
sm->regs_claim = request_mem_region(sm->io_res->start,
|
|
0x100, "sm501");
|
|
|
|
if (sm->regs_claim == NULL) {
|
|
dev_err(&dev->dev, "cannot claim registers\n");
|
|
ret = -EBUSY;
|
|
goto err_res;
|
|
}
|
|
|
|
platform_set_drvdata(dev, sm);
|
|
|
|
sm->regs = ioremap(sm->io_res->start,
|
|
(sm->io_res->end - sm->io_res->start) - 1);
|
|
|
|
if (sm->regs == NULL) {
|
|
dev_err(&dev->dev, "cannot remap registers\n");
|
|
ret = -EIO;
|
|
goto err_claim;
|
|
}
|
|
|
|
return sm501_init_dev(sm);
|
|
|
|
err_claim:
|
|
release_resource(sm->regs_claim);
|
|
kfree(sm->regs_claim);
|
|
err_res:
|
|
kfree(sm);
|
|
err1:
|
|
return ret;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* power management support */
|
|
|
|
static void sm501_set_power(struct sm501_devdata *sm, int on)
|
|
{
|
|
struct sm501_platdata *pd = sm->platdata;
|
|
|
|
if (pd == NULL)
|
|
return;
|
|
|
|
if (pd->get_power) {
|
|
if (pd->get_power(sm->dev) == on) {
|
|
dev_dbg(sm->dev, "is already %d\n", on);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (pd->set_power) {
|
|
dev_dbg(sm->dev, "setting power to %d\n", on);
|
|
|
|
pd->set_power(sm->dev, on);
|
|
sm501_mdelay(sm, 10);
|
|
}
|
|
}
|
|
|
|
static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct sm501_devdata *sm = platform_get_drvdata(pdev);
|
|
|
|
sm->in_suspend = 1;
|
|
sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
|
|
|
|
sm501_dump_regs(sm);
|
|
|
|
if (sm->platdata) {
|
|
if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
|
|
sm501_set_power(sm, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sm501_plat_resume(struct platform_device *pdev)
|
|
{
|
|
struct sm501_devdata *sm = platform_get_drvdata(pdev);
|
|
|
|
sm501_set_power(sm, 1);
|
|
|
|
sm501_dump_regs(sm);
|
|
sm501_dump_gate(sm);
|
|
sm501_dump_clk(sm);
|
|
|
|
/* check to see if we are in the same state as when suspended */
|
|
|
|
if (readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
|
|
dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
|
|
writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
|
|
|
|
/* our suspend causes the controller state to change,
|
|
* either by something attempting setup, power loss,
|
|
* or an external reset event on power change */
|
|
|
|
if (sm->platdata && sm->platdata->init) {
|
|
sm501_init_regs(sm, sm->platdata->init);
|
|
}
|
|
}
|
|
|
|
/* dump our state from resume */
|
|
|
|
sm501_dump_regs(sm);
|
|
sm501_dump_clk(sm);
|
|
|
|
sm->in_suspend = 0;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define sm501_plat_suspend NULL
|
|
#define sm501_plat_resume NULL
|
|
#endif
|
|
|
|
/* Initialisation data for PCI devices */
|
|
|
|
static struct sm501_initdata sm501_pci_initdata = {
|
|
.gpio_high = {
|
|
.set = 0x3F000000, /* 24bit panel */
|
|
.mask = 0x0,
|
|
},
|
|
.misc_timing = {
|
|
.set = 0x010100, /* SDRAM timing */
|
|
.mask = 0x1F1F00,
|
|
},
|
|
.misc_control = {
|
|
.set = SM501_MISC_PNL_24BIT,
|
|
.mask = 0,
|
|
},
|
|
|
|
.devices = SM501_USE_ALL,
|
|
|
|
/* Errata AB-3 says that 72MHz is the fastest available
|
|
* for 33MHZ PCI with proper bus-mastering operation */
|
|
|
|
.mclk = 72 * MHZ,
|
|
.m1xclk = 144 * MHZ,
|
|
};
|
|
|
|
static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
|
|
.flags = (SM501FB_FLAG_USE_INIT_MODE |
|
|
SM501FB_FLAG_USE_HWCURSOR |
|
|
SM501FB_FLAG_USE_HWACCEL |
|
|
SM501FB_FLAG_DISABLE_AT_EXIT),
|
|
};
|
|
|
|
static struct sm501_platdata_fb sm501_fb_pdata = {
|
|
.fb_route = SM501_FB_OWN,
|
|
.fb_crt = &sm501_pdata_fbsub,
|
|
.fb_pnl = &sm501_pdata_fbsub,
|
|
};
|
|
|
|
static struct sm501_platdata sm501_pci_platdata = {
|
|
.init = &sm501_pci_initdata,
|
|
.fb = &sm501_fb_pdata,
|
|
.gpio_base = -1,
|
|
};
|
|
|
|
static int __devinit sm501_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct sm501_devdata *sm;
|
|
int err;
|
|
|
|
sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
|
|
if (sm == NULL) {
|
|
dev_err(&dev->dev, "no memory for device data\n");
|
|
err = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
/* set a default set of platform data */
|
|
dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
|
|
|
|
/* set a hopefully unique id for our child platform devices */
|
|
sm->pdev_id = 32 + dev->devfn;
|
|
|
|
pci_set_drvdata(dev, sm);
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
dev_err(&dev->dev, "cannot enable device\n");
|
|
goto err2;
|
|
}
|
|
|
|
sm->dev = &dev->dev;
|
|
sm->irq = dev->irq;
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
/* if the system is big-endian, we most probably have a
|
|
* translation in the IO layer making the PCI bus little endian
|
|
* so make the framebuffer swapped pixels */
|
|
|
|
sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
|
|
#endif
|
|
|
|
/* check our resources */
|
|
|
|
if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
|
|
dev_err(&dev->dev, "region #0 is not memory?\n");
|
|
err = -EINVAL;
|
|
goto err3;
|
|
}
|
|
|
|
if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
|
|
dev_err(&dev->dev, "region #1 is not memory?\n");
|
|
err = -EINVAL;
|
|
goto err3;
|
|
}
|
|
|
|
/* make our resources ready for sharing */
|
|
|
|
sm->io_res = &dev->resource[1];
|
|
sm->mem_res = &dev->resource[0];
|
|
|
|
sm->regs_claim = request_mem_region(sm->io_res->start,
|
|
0x100, "sm501");
|
|
if (sm->regs_claim == NULL) {
|
|
dev_err(&dev->dev, "cannot claim registers\n");
|
|
err= -EBUSY;
|
|
goto err3;
|
|
}
|
|
|
|
sm->regs = pci_ioremap_bar(dev, 1);
|
|
|
|
if (sm->regs == NULL) {
|
|
dev_err(&dev->dev, "cannot remap registers\n");
|
|
err = -EIO;
|
|
goto err4;
|
|
}
|
|
|
|
sm501_init_dev(sm);
|
|
return 0;
|
|
|
|
err4:
|
|
release_resource(sm->regs_claim);
|
|
kfree(sm->regs_claim);
|
|
err3:
|
|
pci_disable_device(dev);
|
|
err2:
|
|
pci_set_drvdata(dev, NULL);
|
|
kfree(sm);
|
|
err1:
|
|
return err;
|
|
}
|
|
|
|
static void sm501_remove_sub(struct sm501_devdata *sm,
|
|
struct sm501_device *smdev)
|
|
{
|
|
list_del(&smdev->list);
|
|
platform_device_unregister(&smdev->pdev);
|
|
}
|
|
|
|
static void sm501_dev_remove(struct sm501_devdata *sm)
|
|
{
|
|
struct sm501_device *smdev, *tmp;
|
|
|
|
list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
|
|
sm501_remove_sub(sm, smdev);
|
|
|
|
device_remove_file(sm->dev, &dev_attr_dbg_regs);
|
|
|
|
sm501_gpio_remove(sm);
|
|
}
|
|
|
|
static void __devexit sm501_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct sm501_devdata *sm = pci_get_drvdata(dev);
|
|
|
|
sm501_dev_remove(sm);
|
|
iounmap(sm->regs);
|
|
|
|
release_resource(sm->regs_claim);
|
|
kfree(sm->regs_claim);
|
|
|
|
pci_set_drvdata(dev, NULL);
|
|
pci_disable_device(dev);
|
|
}
|
|
|
|
static int sm501_plat_remove(struct platform_device *dev)
|
|
{
|
|
struct sm501_devdata *sm = platform_get_drvdata(dev);
|
|
|
|
sm501_dev_remove(sm);
|
|
iounmap(sm->regs);
|
|
|
|
release_resource(sm->regs_claim);
|
|
kfree(sm->regs_claim);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_device_id sm501_pci_tbl[] = {
|
|
{ 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
|
|
|
|
static struct pci_driver sm501_pci_driver = {
|
|
.name = "sm501",
|
|
.id_table = sm501_pci_tbl,
|
|
.probe = sm501_pci_probe,
|
|
.remove = __devexit_p(sm501_pci_remove),
|
|
};
|
|
|
|
MODULE_ALIAS("platform:sm501");
|
|
|
|
static struct platform_driver sm501_plat_driver = {
|
|
.driver = {
|
|
.name = "sm501",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = sm501_plat_probe,
|
|
.remove = sm501_plat_remove,
|
|
.suspend = sm501_plat_suspend,
|
|
.resume = sm501_plat_resume,
|
|
};
|
|
|
|
static int __init sm501_base_init(void)
|
|
{
|
|
platform_driver_register(&sm501_plat_driver);
|
|
return pci_register_driver(&sm501_pci_driver);
|
|
}
|
|
|
|
static void __exit sm501_base_exit(void)
|
|
{
|
|
platform_driver_unregister(&sm501_plat_driver);
|
|
pci_unregister_driver(&sm501_pci_driver);
|
|
}
|
|
|
|
module_init(sm501_base_init);
|
|
module_exit(sm501_base_exit);
|
|
|
|
MODULE_DESCRIPTION("SM501 Core Driver");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
|
|
MODULE_LICENSE("GPL v2");
|