linux-stable/drivers/scsi/ufs/tc-dwc-g210-pci.c
Asutosh Das b294ff3e34 scsi: ufs: core: Enable power management for wlun
During runtime-suspend of ufs host, the SCSI devices are already suspended
and so are the queues associated with them. However, the ufs host sends SSU
(START_STOP_UNIT) to the wlun during runtime-suspend.

During the process blk_queue_enter() checks if the queue is not in suspended
state. If so, it waits for the queue to resume, and never comes out of
it. Commit 52abca64fd ("scsi: block: Do not accept any requests while
suspended") adds the check to see if the queue is in suspended state in
blk_queue_enter().

Call trace:
 __switch_to+0x174/0x2c4
 __schedule+0x478/0x764
 schedule+0x9c/0xe0
 blk_queue_enter+0x158/0x228
 blk_mq_alloc_request+0x40/0xa4
 blk_get_request+0x2c/0x70
 __scsi_execute+0x60/0x1c4
 ufshcd_set_dev_pwr_mode+0x124/0x1e4
 ufshcd_suspend+0x208/0x83c
 ufshcd_runtime_suspend+0x40/0x154
 ufshcd_pltfrm_runtime_suspend+0x14/0x20
 pm_generic_runtime_suspend+0x28/0x3c
 __rpm_callback+0x80/0x2a4
 rpm_suspend+0x308/0x614
 rpm_idle+0x158/0x228
 pm_runtime_work+0x84/0xac
 process_one_work+0x1f0/0x470
 worker_thread+0x26c/0x4c8
 kthread+0x13c/0x320
 ret_from_fork+0x10/0x18

Fix this by registering ufs device wlun as a SCSI driver and registering it
for block runtime-pm. Also make this a supplier for all other LUNs. This
way the wlun device suspends after all the consumers and resumes after HBA
resumes. This also registers a new SCSI driver for rpmb wlun. This new
driver is mostly used to clear rpmb uac.

[mkp: resolve merge conflict with 5.13-rc1 and fix doc warning]

Fixed smatch warnings:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

Link: https://lore.kernel.org/r/4662c462e79e3e7f541f54f88f8993f421026d83.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-10 22:28:20 -04:00

178 lines
4.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Synopsys G210 Test Chip driver
*
* Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
*
* Authors: Joao Pinto <jpinto@synopsys.com>
*/
#include "ufshcd.h"
#include "ufshcd-dwc.h"
#include "tc-dwc-g210.h"
#include <linux/pci.h>
#include <linux/pm_runtime.h>
/* Test Chip type expected values */
#define TC_G210_20BIT 20
#define TC_G210_40BIT 40
#define TC_G210_INV 0
static int tc_type = TC_G210_INV;
module_param(tc_type, int, 0);
MODULE_PARM_DESC(tc_type, "Test Chip Type (20 = 20-bit, 40 = 40-bit)");
static int tc_dwc_g210_pci_suspend(struct device *dev)
{
return ufshcd_system_suspend(dev_get_drvdata(dev));
}
static int tc_dwc_g210_pci_resume(struct device *dev)
{
return ufshcd_system_resume(dev_get_drvdata(dev));
}
static int tc_dwc_g210_pci_runtime_suspend(struct device *dev)
{
return ufshcd_runtime_suspend(dev_get_drvdata(dev));
}
static int tc_dwc_g210_pci_runtime_resume(struct device *dev)
{
return ufshcd_runtime_resume(dev_get_drvdata(dev));
}
static int tc_dwc_g210_pci_runtime_idle(struct device *dev)
{
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
/*
* struct ufs_hba_dwc_vops - UFS DWC specific variant operations
*/
static struct ufs_hba_variant_ops tc_dwc_g210_pci_hba_vops = {
.name = "tc-dwc-g210-pci",
.link_startup_notify = ufshcd_dwc_link_startup_notify,
};
/**
* tc_dwc_g210_pci_shutdown - main function to put the controller in reset state
* @pdev: pointer to PCI device handle
*/
static void tc_dwc_g210_pci_shutdown(struct pci_dev *pdev)
{
ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev));
}
/**
* tc_dwc_g210_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
* @pdev: pointer to PCI handle
*/
static void tc_dwc_g210_pci_remove(struct pci_dev *pdev)
{
struct ufs_hba *hba = pci_get_drvdata(pdev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
ufshcd_remove(hba);
}
/**
* tc_dwc_g210_pci_probe - probe routine of the driver
* @pdev: pointer to PCI device handle
* @id: PCI device id
*
* Returns 0 on success, non-zero value on failure
*/
static int
tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
int err;
/* Check Test Chip type and set the specific setup routine */
if (tc_type == TC_G210_20BIT) {
tc_dwc_g210_pci_hba_vops.phy_initialization =
tc_dwc_g210_config_20_bit;
} else if (tc_type == TC_G210_40BIT) {
tc_dwc_g210_pci_hba_vops.phy_initialization =
tc_dwc_g210_config_40_bit;
} else {
dev_err(&pdev->dev, "test chip version not specified\n");
return -EPERM;
}
err = pcim_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "pcim_enable_device failed\n");
return err;
}
pci_set_master(pdev);
err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD);
if (err < 0) {
dev_err(&pdev->dev, "request and iomap failed\n");
return err;
}
mmio_base = pcim_iomap_table(pdev)[0];
err = ufshcd_alloc_host(&pdev->dev, &hba);
if (err) {
dev_err(&pdev->dev, "Allocation failed\n");
return err;
}
hba->vops = &tc_dwc_g210_pci_hba_vops;
err = ufshcd_init(hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
return err;
}
pci_set_drvdata(pdev, hba);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
.suspend = tc_dwc_g210_pci_suspend,
.resume = tc_dwc_g210_pci_resume,
.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
.runtime_resume = tc_dwc_g210_pci_runtime_resume,
.runtime_idle = tc_dwc_g210_pci_runtime_idle,
.prepare = ufshcd_suspend_prepare,
.complete = ufshcd_resume_complete,
};
static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
{ PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, tc_dwc_g210_pci_tbl);
static struct pci_driver tc_dwc_g210_pci_driver = {
.name = "tc-dwc-g210-pci",
.id_table = tc_dwc_g210_pci_tbl,
.probe = tc_dwc_g210_pci_probe,
.remove = tc_dwc_g210_pci_remove,
.shutdown = tc_dwc_g210_pci_shutdown,
.driver = {
.pm = &tc_dwc_g210_pci_pm_ops
},
};
module_pci_driver(tc_dwc_g210_pci_driver);
MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
MODULE_DESCRIPTION("Synopsys Test Chip G210 PCI glue driver");
MODULE_LICENSE("Dual BSD/GPL");