mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 03:10:12 +00:00
![Asutosh Das](/assets/img/avatar_default.png)
During runtime-suspend of ufs host, the SCSI devices are already suspended
and so are the queues associated with them. However, the ufs host sends SSU
(START_STOP_UNIT) to the wlun during runtime-suspend.
During the process blk_queue_enter() checks if the queue is not in suspended
state. If so, it waits for the queue to resume, and never comes out of
it. Commit 52abca64fd
("scsi: block: Do not accept any requests while
suspended") adds the check to see if the queue is in suspended state in
blk_queue_enter().
Call trace:
__switch_to+0x174/0x2c4
__schedule+0x478/0x764
schedule+0x9c/0xe0
blk_queue_enter+0x158/0x228
blk_mq_alloc_request+0x40/0xa4
blk_get_request+0x2c/0x70
__scsi_execute+0x60/0x1c4
ufshcd_set_dev_pwr_mode+0x124/0x1e4
ufshcd_suspend+0x208/0x83c
ufshcd_runtime_suspend+0x40/0x154
ufshcd_pltfrm_runtime_suspend+0x14/0x20
pm_generic_runtime_suspend+0x28/0x3c
__rpm_callback+0x80/0x2a4
rpm_suspend+0x308/0x614
rpm_idle+0x158/0x228
pm_runtime_work+0x84/0xac
process_one_work+0x1f0/0x470
worker_thread+0x26c/0x4c8
kthread+0x13c/0x320
ret_from_fork+0x10/0x18
Fix this by registering ufs device wlun as a SCSI driver and registering it
for block runtime-pm. Also make this a supplier for all other LUNs. This
way the wlun device suspends after all the consumers and resumes after HBA
resumes. This also registers a new SCSI driver for rpmb wlun. This new
driver is mostly used to clear rpmb uac.
[mkp: resolve merge conflict with 5.13-rc1 and fix doc warning]
Fixed smatch warnings:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/4662c462e79e3e7f541f54f88f8993f421026d83.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1571 lines
39 KiB
C
1571 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/time.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/devfreq.h>
|
|
|
|
#include "ufshcd.h"
|
|
#include "ufshcd-pltfrm.h"
|
|
#include "unipro.h"
|
|
#include "ufs-qcom.h"
|
|
#include "ufshci.h"
|
|
#include "ufs_quirks.h"
|
|
#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
|
|
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
|
|
|
|
enum {
|
|
TSTBUS_UAWM,
|
|
TSTBUS_UARM,
|
|
TSTBUS_TXUC,
|
|
TSTBUS_RXUC,
|
|
TSTBUS_DFC,
|
|
TSTBUS_TRLUT,
|
|
TSTBUS_TMRLUT,
|
|
TSTBUS_OCSC,
|
|
TSTBUS_UTP_HCI,
|
|
TSTBUS_COMBINED,
|
|
TSTBUS_WRAPPER,
|
|
TSTBUS_UNIPRO,
|
|
TSTBUS_MAX,
|
|
};
|
|
|
|
static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
|
|
|
|
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
|
|
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
|
|
u32 clk_cycles);
|
|
|
|
static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
|
|
{
|
|
return container_of(rcd, struct ufs_qcom_host, rcdev);
|
|
}
|
|
|
|
static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len,
|
|
const char *prefix, void *priv)
|
|
{
|
|
ufshcd_dump_regs(hba, offset, len * 4, prefix);
|
|
}
|
|
|
|
static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
|
|
{
|
|
int err = 0;
|
|
|
|
err = ufshcd_dme_get(hba,
|
|
UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
|
|
if (err)
|
|
dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n",
|
|
__func__, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_host_clk_get(struct device *dev,
|
|
const char *name, struct clk **clk_out, bool optional)
|
|
{
|
|
struct clk *clk;
|
|
int err = 0;
|
|
|
|
clk = devm_clk_get(dev, name);
|
|
if (!IS_ERR(clk)) {
|
|
*clk_out = clk;
|
|
return 0;
|
|
}
|
|
|
|
err = PTR_ERR(clk);
|
|
|
|
if (optional && err == -ENOENT) {
|
|
*clk_out = NULL;
|
|
return 0;
|
|
}
|
|
|
|
if (err != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get %s err %d\n", name, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_host_clk_enable(struct device *dev,
|
|
const char *name, struct clk *clk)
|
|
{
|
|
int err = 0;
|
|
|
|
err = clk_prepare_enable(clk);
|
|
if (err)
|
|
dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
|
|
{
|
|
if (!host->is_lane_clks_enabled)
|
|
return;
|
|
|
|
clk_disable_unprepare(host->tx_l1_sync_clk);
|
|
clk_disable_unprepare(host->tx_l0_sync_clk);
|
|
clk_disable_unprepare(host->rx_l1_sync_clk);
|
|
clk_disable_unprepare(host->rx_l0_sync_clk);
|
|
|
|
host->is_lane_clks_enabled = false;
|
|
}
|
|
|
|
static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
|
|
{
|
|
int err = 0;
|
|
struct device *dev = host->hba->dev;
|
|
|
|
if (host->is_lane_clks_enabled)
|
|
return 0;
|
|
|
|
err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk",
|
|
host->rx_l0_sync_clk);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk",
|
|
host->tx_l0_sync_clk);
|
|
if (err)
|
|
goto disable_rx_l0;
|
|
|
|
err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
|
|
host->rx_l1_sync_clk);
|
|
if (err)
|
|
goto disable_tx_l0;
|
|
|
|
err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
|
|
host->tx_l1_sync_clk);
|
|
if (err)
|
|
goto disable_rx_l1;
|
|
|
|
host->is_lane_clks_enabled = true;
|
|
goto out;
|
|
|
|
disable_rx_l1:
|
|
clk_disable_unprepare(host->rx_l1_sync_clk);
|
|
disable_tx_l0:
|
|
clk_disable_unprepare(host->tx_l0_sync_clk);
|
|
disable_rx_l0:
|
|
clk_disable_unprepare(host->rx_l0_sync_clk);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
|
|
{
|
|
int err = 0;
|
|
struct device *dev = host->hba->dev;
|
|
|
|
if (has_acpi_companion(dev))
|
|
return 0;
|
|
|
|
err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
|
|
&host->rx_l0_sync_clk, false);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk",
|
|
&host->tx_l0_sync_clk, false);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* In case of single lane per direction, don't read lane1 clocks */
|
|
if (host->hba->lanes_per_direction > 1) {
|
|
err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
|
|
&host->rx_l1_sync_clk, false);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
|
|
&host->tx_l1_sync_clk, true);
|
|
}
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
|
|
{
|
|
u32 tx_lanes;
|
|
|
|
return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
|
|
}
|
|
|
|
static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
|
|
{
|
|
int err;
|
|
u32 tx_fsm_val = 0;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
|
|
|
|
do {
|
|
err = ufshcd_dme_get(hba,
|
|
UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
|
|
UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
|
|
&tx_fsm_val);
|
|
if (err || tx_fsm_val == TX_FSM_HIBERN8)
|
|
break;
|
|
|
|
/* sleep for max. 200us */
|
|
usleep_range(100, 200);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
/*
|
|
* we might have scheduled out for long during polling so
|
|
* check the state again.
|
|
*/
|
|
if (time_after(jiffies, timeout))
|
|
err = ufshcd_dme_get(hba,
|
|
UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
|
|
UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
|
|
&tx_fsm_val);
|
|
|
|
if (err) {
|
|
dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
|
|
__func__, err);
|
|
} else if (tx_fsm_val != TX_FSM_HIBERN8) {
|
|
err = tx_fsm_val;
|
|
dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
|
|
__func__, err);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
|
|
{
|
|
ufshcd_rmwl(host->hba, QUNIPRO_SEL,
|
|
ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
|
|
REG_UFS_CFG1);
|
|
/* make sure above configuration is applied before we return */
|
|
mb();
|
|
}
|
|
|
|
/*
|
|
* ufs_qcom_host_reset - reset host controller and PHY
|
|
*/
|
|
static int ufs_qcom_host_reset(struct ufs_hba *hba)
|
|
{
|
|
int ret = 0;
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
bool reenable_intr = false;
|
|
|
|
if (!host->core_reset) {
|
|
dev_warn(hba->dev, "%s: reset control not set\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
reenable_intr = hba->is_irq_enabled;
|
|
disable_irq(hba->irq);
|
|
hba->is_irq_enabled = false;
|
|
|
|
ret = reset_control_assert(host->core_reset);
|
|
if (ret) {
|
|
dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
|
|
__func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* The hardware requirement for delay between assert/deassert
|
|
* is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
|
|
* ~125us (4/32768). To be on the safe side add 200us delay.
|
|
*/
|
|
usleep_range(200, 210);
|
|
|
|
ret = reset_control_deassert(host->core_reset);
|
|
if (ret)
|
|
dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
|
|
__func__, ret);
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
if (reenable_intr) {
|
|
enable_irq(hba->irq);
|
|
hba->is_irq_enabled = true;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct phy *phy = host->generic_phy;
|
|
int ret = 0;
|
|
bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
|
|
? true : false;
|
|
|
|
/* Reset UFS Host Controller and PHY */
|
|
ret = ufs_qcom_host_reset(hba);
|
|
if (ret)
|
|
dev_warn(hba->dev, "%s: host reset returned %d\n",
|
|
__func__, ret);
|
|
|
|
if (is_rate_B)
|
|
phy_set_mode(phy, PHY_MODE_UFS_HS_B);
|
|
|
|
/* phy initialization - calibrate the phy */
|
|
ret = phy_init(phy);
|
|
if (ret) {
|
|
dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
|
|
__func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
/* power on phy - start serdes and phy's power and clocks */
|
|
ret = phy_power_on(phy);
|
|
if (ret) {
|
|
dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
|
|
__func__, ret);
|
|
goto out_disable_phy;
|
|
}
|
|
|
|
ufs_qcom_select_unipro_mode(host);
|
|
|
|
return 0;
|
|
|
|
out_disable_phy:
|
|
phy_exit(phy);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The UTP controller has a number of internal clock gating cells (CGCs).
|
|
* Internal hardware sub-modules within the UTP controller control the CGCs.
|
|
* Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
|
|
* in a specific operation, UTP controller CGCs are by default disabled and
|
|
* this function enables them (after every UFS link startup) to save some power
|
|
* leakage.
|
|
*/
|
|
static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
|
|
{
|
|
ufshcd_writel(hba,
|
|
ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL,
|
|
REG_UFS_CFG2);
|
|
|
|
/* Ensure that HW clock gating is enabled before next operations */
|
|
mb();
|
|
}
|
|
|
|
static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
|
|
enum ufs_notify_change_status status)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
int err = 0;
|
|
|
|
switch (status) {
|
|
case PRE_CHANGE:
|
|
ufs_qcom_power_up_sequence(hba);
|
|
/*
|
|
* The PHY PLL output is the source of tx/rx lane symbol
|
|
* clocks, hence, enable the lane clocks only after PHY
|
|
* is initialized.
|
|
*/
|
|
err = ufs_qcom_enable_lane_clks(host);
|
|
break;
|
|
case POST_CHANGE:
|
|
/* check if UFS PHY moved from DISABLED to HIBERN8 */
|
|
err = ufs_qcom_check_hibern8(hba);
|
|
ufs_qcom_enable_hw_clk_gating(hba);
|
|
ufs_qcom_ice_enable(host);
|
|
break;
|
|
default:
|
|
dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Returns zero for success and non-zero in case of a failure
|
|
*/
|
|
static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
|
|
u32 hs, u32 rate, bool update_link_startup_timer)
|
|
{
|
|
int ret = 0;
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct ufs_clk_info *clki;
|
|
u32 core_clk_period_in_ns;
|
|
u32 tx_clk_cycles_per_us = 0;
|
|
unsigned long core_clk_rate = 0;
|
|
u32 core_clk_cycles_per_us = 0;
|
|
|
|
static u32 pwm_fr_table[][2] = {
|
|
{UFS_PWM_G1, 0x1},
|
|
{UFS_PWM_G2, 0x1},
|
|
{UFS_PWM_G3, 0x1},
|
|
{UFS_PWM_G4, 0x1},
|
|
};
|
|
|
|
static u32 hs_fr_table_rA[][2] = {
|
|
{UFS_HS_G1, 0x1F},
|
|
{UFS_HS_G2, 0x3e},
|
|
{UFS_HS_G3, 0x7D},
|
|
};
|
|
|
|
static u32 hs_fr_table_rB[][2] = {
|
|
{UFS_HS_G1, 0x24},
|
|
{UFS_HS_G2, 0x49},
|
|
{UFS_HS_G3, 0x92},
|
|
};
|
|
|
|
/*
|
|
* The Qunipro controller does not use following registers:
|
|
* SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
|
|
* UFS_REG_PA_LINK_STARTUP_TIMER
|
|
* But UTP controller uses SYS1CLK_1US_REG register for Interrupt
|
|
* Aggregation logic.
|
|
*/
|
|
if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
|
|
goto out;
|
|
|
|
if (gear == 0) {
|
|
dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
|
|
goto out_error;
|
|
}
|
|
|
|
list_for_each_entry(clki, &hba->clk_list_head, list) {
|
|
if (!strcmp(clki->name, "core_clk"))
|
|
core_clk_rate = clk_get_rate(clki->clk);
|
|
}
|
|
|
|
/* If frequency is smaller than 1MHz, set to 1MHz */
|
|
if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
|
|
core_clk_rate = DEFAULT_CLK_RATE_HZ;
|
|
|
|
core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
|
|
if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
|
|
ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
|
|
/*
|
|
* make sure above write gets applied before we return from
|
|
* this function.
|
|
*/
|
|
mb();
|
|
}
|
|
|
|
if (ufs_qcom_cap_qunipro(host))
|
|
goto out;
|
|
|
|
core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
|
|
core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
|
|
core_clk_period_in_ns &= MASK_CLK_NS_REG;
|
|
|
|
switch (hs) {
|
|
case FASTAUTO_MODE:
|
|
case FAST_MODE:
|
|
if (rate == PA_HS_MODE_A) {
|
|
if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
|
|
dev_err(hba->dev,
|
|
"%s: index %d exceeds table size %zu\n",
|
|
__func__, gear,
|
|
ARRAY_SIZE(hs_fr_table_rA));
|
|
goto out_error;
|
|
}
|
|
tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
|
|
} else if (rate == PA_HS_MODE_B) {
|
|
if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
|
|
dev_err(hba->dev,
|
|
"%s: index %d exceeds table size %zu\n",
|
|
__func__, gear,
|
|
ARRAY_SIZE(hs_fr_table_rB));
|
|
goto out_error;
|
|
}
|
|
tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
|
|
} else {
|
|
dev_err(hba->dev, "%s: invalid rate = %d\n",
|
|
__func__, rate);
|
|
goto out_error;
|
|
}
|
|
break;
|
|
case SLOWAUTO_MODE:
|
|
case SLOW_MODE:
|
|
if (gear > ARRAY_SIZE(pwm_fr_table)) {
|
|
dev_err(hba->dev,
|
|
"%s: index %d exceeds table size %zu\n",
|
|
__func__, gear,
|
|
ARRAY_SIZE(pwm_fr_table));
|
|
goto out_error;
|
|
}
|
|
tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
|
|
break;
|
|
case UNCHANGED:
|
|
default:
|
|
dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
|
|
goto out_error;
|
|
}
|
|
|
|
if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
|
|
(core_clk_period_in_ns | tx_clk_cycles_per_us)) {
|
|
/* this register 2 fields shall be written at once */
|
|
ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
|
|
REG_UFS_TX_SYMBOL_CLK_NS_US);
|
|
/*
|
|
* make sure above write gets applied before we return from
|
|
* this function.
|
|
*/
|
|
mb();
|
|
}
|
|
|
|
if (update_link_startup_timer) {
|
|
ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
|
|
REG_UFS_PA_LINK_STARTUP_TIMER);
|
|
/*
|
|
* make sure that this configuration is applied before
|
|
* we return
|
|
*/
|
|
mb();
|
|
}
|
|
goto out;
|
|
|
|
out_error:
|
|
ret = -EINVAL;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
|
|
enum ufs_notify_change_status status)
|
|
{
|
|
int err = 0;
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
switch (status) {
|
|
case PRE_CHANGE:
|
|
if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
|
|
0, true)) {
|
|
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
|
|
__func__);
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (ufs_qcom_cap_qunipro(host))
|
|
/*
|
|
* set unipro core clock cycles to 150 & clear clock
|
|
* divider
|
|
*/
|
|
err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
|
|
150);
|
|
|
|
/*
|
|
* Some UFS devices (and may be host) have issues if LCC is
|
|
* enabled. So we are setting PA_Local_TX_LCC_Enable to 0
|
|
* before link startup which will make sure that both host
|
|
* and device TX LCC are disabled once link startup is
|
|
* completed.
|
|
*/
|
|
if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
|
|
err = ufshcd_disable_host_tx_lcc(hba);
|
|
|
|
break;
|
|
case POST_CHANGE:
|
|
ufs_qcom_link_startup_post_change(hba);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
/* reset gpio is optional */
|
|
if (!host->device_reset)
|
|
return;
|
|
|
|
gpiod_set_value_cansleep(host->device_reset, asserted);
|
|
}
|
|
|
|
static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct phy *phy = host->generic_phy;
|
|
|
|
if (ufs_qcom_is_link_off(hba)) {
|
|
/*
|
|
* Disable the tx/rx lane symbol clocks before PHY is
|
|
* powered down as the PLL source should be disabled
|
|
* after downstream clocks are disabled.
|
|
*/
|
|
ufs_qcom_disable_lane_clks(host);
|
|
phy_power_off(phy);
|
|
|
|
/* reset the connected UFS device during power down */
|
|
ufs_qcom_device_reset_ctrl(hba, true);
|
|
|
|
} else if (!ufs_qcom_is_link_active(hba)) {
|
|
ufs_qcom_disable_lane_clks(host);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct phy *phy = host->generic_phy;
|
|
int err;
|
|
|
|
if (ufs_qcom_is_link_off(hba)) {
|
|
err = phy_power_on(phy);
|
|
if (err) {
|
|
dev_err(hba->dev, "%s: failed PHY power on: %d\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
|
|
err = ufs_qcom_enable_lane_clks(host);
|
|
if (err)
|
|
return err;
|
|
|
|
} else if (!ufs_qcom_is_link_active(hba)) {
|
|
err = ufs_qcom_enable_lane_clks(host);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
err = ufs_qcom_ice_resume(host);
|
|
if (err)
|
|
return err;
|
|
|
|
hba->is_sys_suspended = false;
|
|
return 0;
|
|
}
|
|
|
|
static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
|
|
{
|
|
if (host->dev_ref_clk_ctrl_mmio &&
|
|
(enable ^ host->is_dev_ref_clk_enabled)) {
|
|
u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
|
|
|
|
if (enable)
|
|
temp |= host->dev_ref_clk_en_mask;
|
|
else
|
|
temp &= ~host->dev_ref_clk_en_mask;
|
|
|
|
/*
|
|
* If we are here to disable this clock it might be immediately
|
|
* after entering into hibern8 in which case we need to make
|
|
* sure that device ref_clk is active for specific time after
|
|
* hibern8 enter.
|
|
*/
|
|
if (!enable) {
|
|
unsigned long gating_wait;
|
|
|
|
gating_wait = host->hba->dev_info.clk_gating_wait_us;
|
|
if (!gating_wait) {
|
|
udelay(1);
|
|
} else {
|
|
/*
|
|
* bRefClkGatingWaitTime defines the minimum
|
|
* time for which the reference clock is
|
|
* required by device during transition from
|
|
* HS-MODE to LS-MODE or HIBERN8 state. Give it
|
|
* more delay to be on the safe side.
|
|
*/
|
|
gating_wait += 10;
|
|
usleep_range(gating_wait, gating_wait + 10);
|
|
}
|
|
}
|
|
|
|
writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
|
|
|
|
/* ensure that ref_clk is enabled/disabled before we return */
|
|
wmb();
|
|
|
|
/*
|
|
* If we call hibern8 exit after this, we need to make sure that
|
|
* device ref_clk is stable for at least 1us before the hibern8
|
|
* exit command.
|
|
*/
|
|
if (enable)
|
|
udelay(1);
|
|
|
|
host->is_dev_ref_clk_enabled = enable;
|
|
}
|
|
}
|
|
|
|
static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
|
|
enum ufs_notify_change_status status,
|
|
struct ufs_pa_layer_attr *dev_max_params,
|
|
struct ufs_pa_layer_attr *dev_req_params)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct ufs_dev_params ufs_qcom_cap;
|
|
int ret = 0;
|
|
|
|
if (!dev_req_params) {
|
|
pr_err("%s: incoming dev_req_params is NULL\n", __func__);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
switch (status) {
|
|
case PRE_CHANGE:
|
|
ufshcd_init_pwr_dev_param(&ufs_qcom_cap);
|
|
ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
|
|
|
|
if (host->hw_ver.major == 0x1) {
|
|
/*
|
|
* HS-G3 operations may not reliably work on legacy QCOM
|
|
* UFS host controller hardware even though capability
|
|
* exchange during link startup phase may end up
|
|
* negotiating maximum supported gear as G3.
|
|
* Hence downgrade the maximum supported gear to HS-G2.
|
|
*/
|
|
if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
|
|
ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
|
|
if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
|
|
ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
|
|
}
|
|
|
|
ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap,
|
|
dev_max_params,
|
|
dev_req_params);
|
|
if (ret) {
|
|
pr_err("%s: failed to determine capabilities\n",
|
|
__func__);
|
|
goto out;
|
|
}
|
|
|
|
/* enable the device ref clock before changing to HS mode */
|
|
if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
|
|
ufshcd_is_hs_mode(dev_req_params))
|
|
ufs_qcom_dev_ref_clk_ctrl(host, true);
|
|
|
|
if (host->hw_ver.major >= 0x4) {
|
|
ufshcd_dme_configure_adapt(hba,
|
|
dev_req_params->gear_tx,
|
|
PA_INITIAL_ADAPT);
|
|
}
|
|
break;
|
|
case POST_CHANGE:
|
|
if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
|
|
dev_req_params->pwr_rx,
|
|
dev_req_params->hs_rate, false)) {
|
|
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
|
|
__func__);
|
|
/*
|
|
* we return error code at the end of the routine,
|
|
* but continue to configure UFS_PHY_TX_LANE_ENABLE
|
|
* and bus voting as usual
|
|
*/
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
/* cache the power mode parameters to use internally */
|
|
memcpy(&host->dev_req_params,
|
|
dev_req_params, sizeof(*dev_req_params));
|
|
|
|
/* disable the device ref clock if entered PWM mode */
|
|
if (ufshcd_is_hs_mode(&hba->pwr_info) &&
|
|
!ufshcd_is_hs_mode(dev_req_params))
|
|
ufs_qcom_dev_ref_clk_ctrl(host, false);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
|
|
{
|
|
int err;
|
|
u32 pa_vs_config_reg1;
|
|
|
|
err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
|
|
&pa_vs_config_reg1);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* Allow extension of MSB bits of PA_SaveConfigTime attribute */
|
|
err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
|
|
(pa_vs_config_reg1 | (1 << 12)));
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
|
|
{
|
|
int err = 0;
|
|
|
|
if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
|
|
err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
|
|
|
|
if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC)
|
|
hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
|
|
|
|
return err;
|
|
}
|
|
|
|
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
if (host->hw_ver.major == 0x1)
|
|
return ufshci_version(1, 1);
|
|
else
|
|
return ufshci_version(2, 0);
|
|
}
|
|
|
|
/**
|
|
* ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
|
|
* @hba: host controller instance
|
|
*
|
|
* QCOM UFS host controller might have some non standard behaviours (quirks)
|
|
* than what is specified by UFSHCI specification. Advertise all such
|
|
* quirks to standard UFS host controller driver so standard takes them into
|
|
* account.
|
|
*/
|
|
static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
if (host->hw_ver.major == 0x01) {
|
|
hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
|
|
| UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
|
|
| UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE;
|
|
|
|
if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
|
|
hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
|
|
|
|
hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
|
|
}
|
|
|
|
if (host->hw_ver.major == 0x2) {
|
|
hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
|
|
|
|
if (!ufs_qcom_cap_qunipro(host))
|
|
/* Legacy UniPro mode still need following quirks */
|
|
hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
|
|
| UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE
|
|
| UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP);
|
|
}
|
|
}
|
|
|
|
static void ufs_qcom_set_caps(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
|
|
hba->caps |= UFSHCD_CAP_CLK_SCALING;
|
|
hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
|
|
hba->caps |= UFSHCD_CAP_WB_EN;
|
|
hba->caps |= UFSHCD_CAP_CRYPTO;
|
|
hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE;
|
|
|
|
if (host->hw_ver.major >= 0x2) {
|
|
host->caps = UFS_QCOM_CAP_QUNIPRO |
|
|
UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ufs_qcom_setup_clocks - enables/disable clocks
|
|
* @hba: host controller instance
|
|
* @on: If true, enable clocks else disable them.
|
|
* @status: PRE_CHANGE or POST_CHANGE notify
|
|
*
|
|
* Returns 0 on success, non-zero on failure.
|
|
*/
|
|
static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
|
|
enum ufs_notify_change_status status)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
int err = 0;
|
|
|
|
/*
|
|
* In case ufs_qcom_init() is not yet done, simply ignore.
|
|
* This ufs_qcom_setup_clocks() shall be called from
|
|
* ufs_qcom_init() after init is done.
|
|
*/
|
|
if (!host)
|
|
return 0;
|
|
|
|
switch (status) {
|
|
case PRE_CHANGE:
|
|
if (!on) {
|
|
if (!ufs_qcom_is_link_active(hba)) {
|
|
/* disable device ref_clk */
|
|
ufs_qcom_dev_ref_clk_ctrl(host, false);
|
|
}
|
|
}
|
|
break;
|
|
case POST_CHANGE:
|
|
if (on) {
|
|
/* enable the device ref clock for HS mode*/
|
|
if (ufshcd_is_hs_mode(&hba->pwr_info))
|
|
ufs_qcom_dev_ref_clk_ctrl(host, true);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
|
|
{
|
|
struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
|
|
|
|
/* Currently this code only knows about a single reset. */
|
|
WARN_ON(id);
|
|
ufs_qcom_assert_reset(host->hba);
|
|
/* provide 1ms delay to let the reset pulse propagate. */
|
|
usleep_range(1000, 1100);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
|
|
{
|
|
struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
|
|
|
|
/* Currently this code only knows about a single reset. */
|
|
WARN_ON(id);
|
|
ufs_qcom_deassert_reset(host->hba);
|
|
|
|
/*
|
|
* after reset deassertion, phy will need all ref clocks,
|
|
* voltage, current to settle down before starting serdes.
|
|
*/
|
|
usleep_range(1000, 1100);
|
|
return 0;
|
|
}
|
|
|
|
static const struct reset_control_ops ufs_qcom_reset_ops = {
|
|
.assert = ufs_qcom_reset_assert,
|
|
.deassert = ufs_qcom_reset_deassert,
|
|
};
|
|
|
|
#define ANDROID_BOOT_DEV_MAX 30
|
|
static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
|
|
|
|
#ifndef MODULE
|
|
static int __init get_android_boot_dev(char *str)
|
|
{
|
|
strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
|
|
return 1;
|
|
}
|
|
__setup("androidboot.bootdevice=", get_android_boot_dev);
|
|
#endif
|
|
|
|
/**
|
|
* ufs_qcom_init - bind phy with controller
|
|
* @hba: host controller instance
|
|
*
|
|
* Binds PHY with controller and powers up PHY enabling clocks
|
|
* and regulators.
|
|
*
|
|
* Returns -EPROBE_DEFER if binding fails, returns negative error
|
|
* on phy power up failure and returns zero on success.
|
|
*/
|
|
static int ufs_qcom_init(struct ufs_hba *hba)
|
|
{
|
|
int err;
|
|
struct device *dev = hba->dev;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct ufs_qcom_host *host;
|
|
struct resource *res;
|
|
struct ufs_clk_info *clki;
|
|
|
|
if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
|
|
return -ENODEV;
|
|
|
|
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
|
|
if (!host) {
|
|
err = -ENOMEM;
|
|
dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
/* Make a two way bind between the qcom host and the hba */
|
|
host->hba = hba;
|
|
ufshcd_set_variant(hba, host);
|
|
|
|
/* Setup the reset control of HCI */
|
|
host->core_reset = devm_reset_control_get(hba->dev, "rst");
|
|
if (IS_ERR(host->core_reset)) {
|
|
err = PTR_ERR(host->core_reset);
|
|
dev_warn(dev, "Failed to get reset control %d\n", err);
|
|
host->core_reset = NULL;
|
|
err = 0;
|
|
}
|
|
|
|
/* Fire up the reset controller. Failure here is non-fatal. */
|
|
host->rcdev.of_node = dev->of_node;
|
|
host->rcdev.ops = &ufs_qcom_reset_ops;
|
|
host->rcdev.owner = dev->driver->owner;
|
|
host->rcdev.nr_resets = 1;
|
|
err = devm_reset_controller_register(dev, &host->rcdev);
|
|
if (err) {
|
|
dev_warn(dev, "Failed to register reset controller\n");
|
|
err = 0;
|
|
}
|
|
|
|
/*
|
|
* voting/devoting device ref_clk source is time consuming hence
|
|
* skip devoting it during aggressive clock gating. This clock
|
|
* will still be gated off during runtime suspend.
|
|
*/
|
|
host->generic_phy = devm_phy_get(dev, "ufsphy");
|
|
|
|
if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) {
|
|
/*
|
|
* UFS driver might be probed before the phy driver does.
|
|
* In that case we would like to return EPROBE_DEFER code.
|
|
*/
|
|
err = -EPROBE_DEFER;
|
|
dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n",
|
|
__func__, err);
|
|
goto out_variant_clear;
|
|
} else if (IS_ERR(host->generic_phy)) {
|
|
if (has_acpi_companion(dev)) {
|
|
host->generic_phy = NULL;
|
|
} else {
|
|
err = PTR_ERR(host->generic_phy);
|
|
dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
|
|
goto out_variant_clear;
|
|
}
|
|
}
|
|
|
|
host->device_reset = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(host->device_reset)) {
|
|
err = PTR_ERR(host->device_reset);
|
|
if (err != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to acquire reset gpio: %d\n", err);
|
|
goto out_variant_clear;
|
|
}
|
|
|
|
ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
|
|
&host->hw_ver.minor, &host->hw_ver.step);
|
|
|
|
/*
|
|
* for newer controllers, device reference clock control bit has
|
|
* moved inside UFS controller register address space itself.
|
|
*/
|
|
if (host->hw_ver.major >= 0x02) {
|
|
host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
|
|
host->dev_ref_clk_en_mask = BIT(26);
|
|
} else {
|
|
/* "dev_ref_clk_ctrl_mem" is optional resource */
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"dev_ref_clk_ctrl_mem");
|
|
if (res) {
|
|
host->dev_ref_clk_ctrl_mmio =
|
|
devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(host->dev_ref_clk_ctrl_mmio))
|
|
host->dev_ref_clk_ctrl_mmio = NULL;
|
|
host->dev_ref_clk_en_mask = BIT(5);
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(clki, &hba->clk_list_head, list) {
|
|
if (!strcmp(clki->name, "core_clk_unipro"))
|
|
clki->keep_link_active = true;
|
|
}
|
|
|
|
err = ufs_qcom_init_lane_clks(host);
|
|
if (err)
|
|
goto out_variant_clear;
|
|
|
|
ufs_qcom_set_caps(hba);
|
|
ufs_qcom_advertise_quirks(hba);
|
|
|
|
err = ufs_qcom_ice_init(host);
|
|
if (err)
|
|
goto out_variant_clear;
|
|
|
|
ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
|
|
|
|
if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
|
|
ufs_qcom_hosts[hba->dev->id] = host;
|
|
|
|
host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN;
|
|
ufs_qcom_get_default_testbus_cfg(host);
|
|
err = ufs_qcom_testbus_config(host);
|
|
if (err) {
|
|
dev_warn(dev, "%s: failed to configure the testbus %d\n",
|
|
__func__, err);
|
|
err = 0;
|
|
}
|
|
|
|
goto out;
|
|
|
|
out_variant_clear:
|
|
ufshcd_set_variant(hba, NULL);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void ufs_qcom_exit(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
ufs_qcom_disable_lane_clks(host);
|
|
phy_power_off(host->generic_phy);
|
|
phy_exit(host->generic_phy);
|
|
}
|
|
|
|
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
|
|
u32 clk_cycles)
|
|
{
|
|
int err;
|
|
u32 core_clk_ctrl_reg;
|
|
|
|
if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
|
|
return -EINVAL;
|
|
|
|
err = ufshcd_dme_get(hba,
|
|
UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
|
|
&core_clk_ctrl_reg);
|
|
if (err)
|
|
goto out;
|
|
|
|
core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
|
|
core_clk_ctrl_reg |= clk_cycles;
|
|
|
|
/* Clear CORE_CLK_DIV_EN */
|
|
core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
|
|
|
|
err = ufshcd_dme_set(hba,
|
|
UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
|
|
core_clk_ctrl_reg);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
|
|
{
|
|
/* nothing to do as of now */
|
|
return 0;
|
|
}
|
|
|
|
static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
if (!ufs_qcom_cap_qunipro(host))
|
|
return 0;
|
|
|
|
/* set unipro core clock cycles to 150 and clear clock divider */
|
|
return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
|
|
}
|
|
|
|
static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
int err;
|
|
u32 core_clk_ctrl_reg;
|
|
|
|
if (!ufs_qcom_cap_qunipro(host))
|
|
return 0;
|
|
|
|
err = ufshcd_dme_get(hba,
|
|
UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
|
|
&core_clk_ctrl_reg);
|
|
|
|
/* make sure CORE_CLK_DIV_EN is cleared */
|
|
if (!err &&
|
|
(core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
|
|
core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
|
|
err = ufshcd_dme_set(hba,
|
|
UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
|
|
core_clk_ctrl_reg);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
if (!ufs_qcom_cap_qunipro(host))
|
|
return 0;
|
|
|
|
/* set unipro core clock cycles to 75 and clear clock divider */
|
|
return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
|
|
}
|
|
|
|
static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
|
|
bool scale_up, enum ufs_notify_change_status status)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
|
|
int err = 0;
|
|
|
|
if (status == PRE_CHANGE) {
|
|
if (scale_up)
|
|
err = ufs_qcom_clk_scale_up_pre_change(hba);
|
|
else
|
|
err = ufs_qcom_clk_scale_down_pre_change(hba);
|
|
} else {
|
|
if (scale_up)
|
|
err = ufs_qcom_clk_scale_up_post_change(hba);
|
|
else
|
|
err = ufs_qcom_clk_scale_down_post_change(hba);
|
|
|
|
if (err || !dev_req_params)
|
|
goto out;
|
|
|
|
ufs_qcom_cfg_timers(hba,
|
|
dev_req_params->gear_rx,
|
|
dev_req_params->pwr_rx,
|
|
dev_req_params->hs_rate,
|
|
false);
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba,
|
|
void *priv, void (*print_fn)(struct ufs_hba *hba,
|
|
int offset, int num_regs, const char *str, void *priv))
|
|
{
|
|
u32 reg;
|
|
struct ufs_qcom_host *host;
|
|
|
|
if (unlikely(!hba)) {
|
|
pr_err("%s: hba is NULL\n", __func__);
|
|
return;
|
|
}
|
|
if (unlikely(!print_fn)) {
|
|
dev_err(hba->dev, "%s: print_fn is NULL\n", __func__);
|
|
return;
|
|
}
|
|
|
|
host = ufshcd_get_variant(hba);
|
|
if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN))
|
|
return;
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC);
|
|
print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv);
|
|
|
|
reg = ufshcd_readl(hba, REG_UFS_CFG1);
|
|
reg |= UTP_DBG_RAMS_EN;
|
|
ufshcd_writel(hba, reg, REG_UFS_CFG1);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM);
|
|
print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM);
|
|
print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
|
|
print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
|
|
|
|
/* clear bit 17 - UTP_DBG_RAMS_EN */
|
|
ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
|
|
print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM);
|
|
print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC);
|
|
print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC);
|
|
print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC);
|
|
print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT);
|
|
print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv);
|
|
|
|
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT);
|
|
print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv);
|
|
}
|
|
|
|
static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
|
|
{
|
|
if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) {
|
|
ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
|
|
UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
|
|
ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
|
|
} else {
|
|
ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1);
|
|
ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1);
|
|
}
|
|
}
|
|
|
|
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
|
|
{
|
|
/* provide a legal default configuration */
|
|
host->testbus.select_major = TSTBUS_UNIPRO;
|
|
host->testbus.select_minor = 37;
|
|
}
|
|
|
|
static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
|
|
{
|
|
if (host->testbus.select_major >= TSTBUS_MAX) {
|
|
dev_err(host->hba->dev,
|
|
"%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
|
|
__func__, host->testbus.select_major);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
|
|
{
|
|
int reg;
|
|
int offset;
|
|
u32 mask = TEST_BUS_SUB_SEL_MASK;
|
|
|
|
if (!host)
|
|
return -EINVAL;
|
|
|
|
if (!ufs_qcom_testbus_cfg_is_ok(host))
|
|
return -EPERM;
|
|
|
|
switch (host->testbus.select_major) {
|
|
case TSTBUS_UAWM:
|
|
reg = UFS_TEST_BUS_CTRL_0;
|
|
offset = 24;
|
|
break;
|
|
case TSTBUS_UARM:
|
|
reg = UFS_TEST_BUS_CTRL_0;
|
|
offset = 16;
|
|
break;
|
|
case TSTBUS_TXUC:
|
|
reg = UFS_TEST_BUS_CTRL_0;
|
|
offset = 8;
|
|
break;
|
|
case TSTBUS_RXUC:
|
|
reg = UFS_TEST_BUS_CTRL_0;
|
|
offset = 0;
|
|
break;
|
|
case TSTBUS_DFC:
|
|
reg = UFS_TEST_BUS_CTRL_1;
|
|
offset = 24;
|
|
break;
|
|
case TSTBUS_TRLUT:
|
|
reg = UFS_TEST_BUS_CTRL_1;
|
|
offset = 16;
|
|
break;
|
|
case TSTBUS_TMRLUT:
|
|
reg = UFS_TEST_BUS_CTRL_1;
|
|
offset = 8;
|
|
break;
|
|
case TSTBUS_OCSC:
|
|
reg = UFS_TEST_BUS_CTRL_1;
|
|
offset = 0;
|
|
break;
|
|
case TSTBUS_WRAPPER:
|
|
reg = UFS_TEST_BUS_CTRL_2;
|
|
offset = 16;
|
|
break;
|
|
case TSTBUS_COMBINED:
|
|
reg = UFS_TEST_BUS_CTRL_2;
|
|
offset = 8;
|
|
break;
|
|
case TSTBUS_UTP_HCI:
|
|
reg = UFS_TEST_BUS_CTRL_2;
|
|
offset = 0;
|
|
break;
|
|
case TSTBUS_UNIPRO:
|
|
reg = UFS_UNIPRO_CFG;
|
|
offset = 20;
|
|
mask = 0xFFF;
|
|
break;
|
|
/*
|
|
* No need for a default case, since
|
|
* ufs_qcom_testbus_cfg_is_ok() checks that the configuration
|
|
* is legal
|
|
*/
|
|
}
|
|
mask <<= offset;
|
|
ufshcd_rmwl(host->hba, TEST_BUS_SEL,
|
|
(u32)host->testbus.select_major << 19,
|
|
REG_UFS_CFG1);
|
|
ufshcd_rmwl(host->hba, mask,
|
|
(u32)host->testbus.select_minor << offset,
|
|
reg);
|
|
ufs_qcom_enable_test_bus(host);
|
|
/*
|
|
* Make sure the test bus configuration is
|
|
* committed before returning.
|
|
*/
|
|
mb();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
|
|
{
|
|
ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4,
|
|
"HCI Vendor Specific Registers ");
|
|
|
|
ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper);
|
|
}
|
|
|
|
/**
|
|
* ufs_qcom_device_reset() - toggle the (optional) device reset line
|
|
* @hba: per-adapter instance
|
|
*
|
|
* Toggles the (optional) reset line to reset the attached device.
|
|
*/
|
|
static int ufs_qcom_device_reset(struct ufs_hba *hba)
|
|
{
|
|
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
|
|
|
|
/* reset gpio is optional */
|
|
if (!host->device_reset)
|
|
return -EOPNOTSUPP;
|
|
|
|
/*
|
|
* The UFS device shall detect reset pulses of 1us, sleep for 10us to
|
|
* be on the safe side.
|
|
*/
|
|
ufs_qcom_device_reset_ctrl(hba, true);
|
|
usleep_range(10, 15);
|
|
|
|
ufs_qcom_device_reset_ctrl(hba, false);
|
|
usleep_range(10, 15);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
|
|
static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
|
|
struct devfreq_dev_profile *p,
|
|
void *data)
|
|
{
|
|
static struct devfreq_simple_ondemand_data *d;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
d = (struct devfreq_simple_ondemand_data *)data;
|
|
p->polling_ms = 60;
|
|
d->upthreshold = 70;
|
|
d->downdifferential = 5;
|
|
}
|
|
#else
|
|
static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
|
|
struct devfreq_dev_profile *p,
|
|
void *data)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
|
|
*
|
|
* The variant operations configure the necessary controller and PHY
|
|
* handshake during initialization.
|
|
*/
|
|
static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
|
|
.name = "qcom",
|
|
.init = ufs_qcom_init,
|
|
.exit = ufs_qcom_exit,
|
|
.get_ufs_hci_version = ufs_qcom_get_ufs_hci_version,
|
|
.clk_scale_notify = ufs_qcom_clk_scale_notify,
|
|
.setup_clocks = ufs_qcom_setup_clocks,
|
|
.hce_enable_notify = ufs_qcom_hce_enable_notify,
|
|
.link_startup_notify = ufs_qcom_link_startup_notify,
|
|
.pwr_change_notify = ufs_qcom_pwr_change_notify,
|
|
.apply_dev_quirks = ufs_qcom_apply_dev_quirks,
|
|
.suspend = ufs_qcom_suspend,
|
|
.resume = ufs_qcom_resume,
|
|
.dbg_register_dump = ufs_qcom_dump_dbg_regs,
|
|
.device_reset = ufs_qcom_device_reset,
|
|
.config_scaling_param = ufs_qcom_config_scaling_param,
|
|
.program_key = ufs_qcom_ice_program_key,
|
|
};
|
|
|
|
/**
|
|
* ufs_qcom_probe - probe routine of the driver
|
|
* @pdev: pointer to Platform device handle
|
|
*
|
|
* Return zero for success and non-zero for failure
|
|
*/
|
|
static int ufs_qcom_probe(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/* Perform generic probe */
|
|
err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
|
|
if (err)
|
|
dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ufs_qcom_remove - set driver_data of the device to NULL
|
|
* @pdev: pointer to platform device handle
|
|
*
|
|
* Always returns 0
|
|
*/
|
|
static int ufs_qcom_remove(struct platform_device *pdev)
|
|
{
|
|
struct ufs_hba *hba = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_get_sync(&(pdev)->dev);
|
|
ufshcd_remove(hba);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ufs_qcom_of_match[] = {
|
|
{ .compatible = "qcom,ufshc"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id ufs_qcom_acpi_match[] = {
|
|
{ "QCOM24A5" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);
|
|
#endif
|
|
|
|
static const struct dev_pm_ops ufs_qcom_pm_ops = {
|
|
.suspend = ufshcd_pltfrm_suspend,
|
|
.resume = ufshcd_pltfrm_resume,
|
|
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
|
|
.runtime_resume = ufshcd_pltfrm_runtime_resume,
|
|
.runtime_idle = ufshcd_pltfrm_runtime_idle,
|
|
.prepare = ufshcd_suspend_prepare,
|
|
.complete = ufshcd_resume_complete,
|
|
};
|
|
|
|
static struct platform_driver ufs_qcom_pltform = {
|
|
.probe = ufs_qcom_probe,
|
|
.remove = ufs_qcom_remove,
|
|
.shutdown = ufshcd_pltfrm_shutdown,
|
|
.driver = {
|
|
.name = "ufshcd-qcom",
|
|
.pm = &ufs_qcom_pm_ops,
|
|
.of_match_table = of_match_ptr(ufs_qcom_of_match),
|
|
.acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match),
|
|
},
|
|
};
|
|
module_platform_driver(ufs_qcom_pltform);
|
|
|
|
MODULE_LICENSE("GPL v2");
|