mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Thomas Gleixner](/assets/img/avatar_default.png)
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
357 lines
8.6 KiB
C
357 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* pata-cs5530.c - CS5530 PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
*
|
|
* based upon cs5530.c by Mark Lord.
|
|
*
|
|
* Loosely based on the piix & svwks drivers.
|
|
*
|
|
* Documentation:
|
|
* Available from AMD web site.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#define DRV_NAME "pata_cs5530"
|
|
#define DRV_VERSION "0.7.4"
|
|
|
|
static void __iomem *cs5530_port_base(struct ata_port *ap)
|
|
{
|
|
unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
|
|
|
|
return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
|
|
}
|
|
|
|
/**
|
|
* cs5530_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*
|
|
* Set our PIO requirements. This is fairly simple on the CS5530
|
|
* chips.
|
|
*/
|
|
|
|
static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const unsigned int cs5530_pio_timings[2][5] = {
|
|
{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
|
|
{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
|
|
};
|
|
void __iomem *base = cs5530_port_base(ap);
|
|
u32 tuning;
|
|
int format;
|
|
|
|
/* Find out which table to use */
|
|
tuning = ioread32(base + 0x04);
|
|
format = (tuning & 0x80000000UL) ? 1 : 0;
|
|
|
|
/* Now load the right timing register */
|
|
if (adev->devno)
|
|
base += 0x08;
|
|
|
|
iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
|
|
}
|
|
|
|
/**
|
|
* cs5530_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
* We cannot mix MWDMA and UDMA without reloading timings each switch
|
|
* master to slave. We track the last DMA setup in order to minimise
|
|
* reloads.
|
|
*/
|
|
|
|
static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
void __iomem *base = cs5530_port_base(ap);
|
|
u32 tuning, timing = 0;
|
|
u8 reg;
|
|
|
|
/* Find out which table to use */
|
|
tuning = ioread32(base + 0x04);
|
|
|
|
switch(adev->dma_mode) {
|
|
case XFER_UDMA_0:
|
|
timing = 0x00921250;break;
|
|
case XFER_UDMA_1:
|
|
timing = 0x00911140;break;
|
|
case XFER_UDMA_2:
|
|
timing = 0x00911030;break;
|
|
case XFER_MW_DMA_0:
|
|
timing = 0x00077771;break;
|
|
case XFER_MW_DMA_1:
|
|
timing = 0x00012121;break;
|
|
case XFER_MW_DMA_2:
|
|
timing = 0x00002020;break;
|
|
default:
|
|
BUG();
|
|
}
|
|
/* Merge in the PIO format bit */
|
|
timing |= (tuning & 0x80000000UL);
|
|
if (adev->devno == 0) /* Master */
|
|
iowrite32(timing, base + 0x04);
|
|
else {
|
|
if (timing & 0x00100000)
|
|
tuning |= 0x00100000; /* UDMA for both */
|
|
else
|
|
tuning &= ~0x00100000; /* MWDMA for both */
|
|
iowrite32(tuning, base + 0x04);
|
|
iowrite32(timing, base + 0x0C);
|
|
}
|
|
|
|
/* Set the DMA capable bit in the BMDMA area */
|
|
reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
reg |= (1 << (5 + adev->devno));
|
|
iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
|
|
/* Remember the last DMA setup we did */
|
|
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* cs5530_qc_issue - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* necessary. Specifically we have a problem that there is only
|
|
* one MWDMA/UDMA bit.
|
|
*/
|
|
|
|
static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
struct ata_device *prev = ap->private_data;
|
|
|
|
/* See if the DMA settings could be wrong */
|
|
if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
|
|
/* Maybe, but do the channels match MWDMA/UDMA ? */
|
|
if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
|
|
(ata_using_udma(prev) && !ata_using_udma(adev)))
|
|
/* Switch the mode bits */
|
|
cs5530_set_dmamode(ap, adev);
|
|
}
|
|
|
|
return ata_bmdma_qc_issue(qc);
|
|
}
|
|
|
|
static struct scsi_host_template cs5530_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
|
|
};
|
|
|
|
static struct ata_port_operations cs5530_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.qc_prep = ata_bmdma_dumb_qc_prep,
|
|
.qc_issue = cs5530_qc_issue,
|
|
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = cs5530_set_piomode,
|
|
.set_dmamode = cs5530_set_dmamode,
|
|
};
|
|
|
|
static const struct dmi_system_id palmax_dmi_table[] = {
|
|
{
|
|
.ident = "Palmax PD1100",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int cs5530_is_palmax(void)
|
|
{
|
|
if (dmi_check_system(palmax_dmi_table)) {
|
|
printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* cs5530_init_chip - Chipset init
|
|
*
|
|
* Perform the chip initialisation work that is shared between both
|
|
* setup and resume paths
|
|
*/
|
|
|
|
static int cs5530_init_chip(void)
|
|
{
|
|
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
|
|
|
|
while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
|
|
master_0 = pci_dev_get(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
|
|
cs5530_0 = pci_dev_get(dev);
|
|
break;
|
|
}
|
|
}
|
|
if (!master_0) {
|
|
printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
|
|
goto fail_put;
|
|
}
|
|
if (!cs5530_0) {
|
|
printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
|
|
goto fail_put;
|
|
}
|
|
|
|
pci_set_master(cs5530_0);
|
|
pci_try_set_mwi(cs5530_0);
|
|
|
|
/*
|
|
* Set PCI CacheLineSize to 16-bytes:
|
|
* --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
|
|
*
|
|
* Note: This value is constant because the 5530 is only a Geode companion
|
|
*/
|
|
|
|
pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
|
|
|
|
/*
|
|
* Disable trapping of UDMA register accesses (Win98 hack):
|
|
* --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
|
|
*/
|
|
|
|
pci_write_config_word(cs5530_0, 0xd0, 0x5006);
|
|
|
|
/*
|
|
* Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
|
|
* The other settings are what is necessary to get the register
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x40, 0x1e);
|
|
|
|
/*
|
|
* Set max PCI burst size (16-bytes seems to work best):
|
|
* 16bytes: set bit-1 at 0x41 (reg value of 0x16)
|
|
* all others: clear bit-1 at 0x41, and do:
|
|
* 128bytes: OR 0x00 at 0x41
|
|
* 256bytes: OR 0x04 at 0x41
|
|
* 512bytes: OR 0x08 at 0x41
|
|
* 1024bytes: OR 0x0c at 0x41
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x41, 0x14);
|
|
|
|
/*
|
|
* These settings are necessary to get the chip
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x42, 0x00);
|
|
pci_write_config_byte(master_0, 0x43, 0xc1);
|
|
|
|
pci_dev_put(master_0);
|
|
pci_dev_put(cs5530_0);
|
|
return 0;
|
|
fail_put:
|
|
pci_dev_put(master_0);
|
|
pci_dev_put(cs5530_0);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* cs5530_init_one - Initialise a CS5530
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
* Install a driver for the newly found CS5530 companion chip. Most of
|
|
* this is just housekeeping. We have to set the chip up correctly and
|
|
* turn off various bits of emulation magic.
|
|
*/
|
|
|
|
static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA2,
|
|
.port_ops = &cs5530_port_ops
|
|
};
|
|
/* The docking connector doesn't do UDMA, and it seems not MWDMA */
|
|
static const struct ata_port_info info_palmax_secondary = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.port_ops = &cs5530_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
int rc;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Chip initialisation */
|
|
if (cs5530_init_chip())
|
|
return -ENODEV;
|
|
|
|
if (cs5530_is_palmax())
|
|
ppi[1] = &info_palmax_secondary;
|
|
|
|
/* Now kick off ATA set up */
|
|
return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int cs5530_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* If we fail on resume we are doomed */
|
|
if (cs5530_init_chip())
|
|
return -EIO;
|
|
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct pci_device_id cs5530[] = {
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cs5530_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cs5530,
|
|
.probe = cs5530_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = cs5530_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(cs5530_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cs5530);
|
|
MODULE_VERSION(DRV_VERSION);
|