linux-stable/drivers/gpio/gpio-mlxbf.c
YueHaibing b0d2569d82 gpio: mlxbf: remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-04-08 08:47:06 +02:00

152 lines
3.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/resource.h>
#include <linux/types.h>
/* Number of pins on BlueField */
#define MLXBF_GPIO_NR 54
/* Pad Electrical Controls. */
#define MLXBF_GPIO_PAD_CONTROL_FIRST_WORD 0x0700
#define MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD 0x0708
#define MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD 0x0710
#define MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD 0x0718
#define MLXBF_GPIO_PIN_DIR_I 0x1040
#define MLXBF_GPIO_PIN_DIR_O 0x1048
#define MLXBF_GPIO_PIN_STATE 0x1000
#define MLXBF_GPIO_SCRATCHPAD 0x20
#ifdef CONFIG_PM
struct mlxbf_gpio_context_save_regs {
u64 scratchpad;
u64 pad_control[MLXBF_GPIO_NR];
u64 pin_dir_i;
u64 pin_dir_o;
};
#endif
/* Device state structure. */
struct mlxbf_gpio_state {
struct gpio_chip gc;
/* Memory Address */
void __iomem *base;
#ifdef CONFIG_PM
struct mlxbf_gpio_context_save_regs csave_regs;
#endif
};
static int mlxbf_gpio_probe(struct platform_device *pdev)
{
struct mlxbf_gpio_state *gs;
struct device *dev = &pdev->dev;
struct gpio_chip *gc;
int ret;
gs = devm_kzalloc(&pdev->dev, sizeof(*gs), GFP_KERNEL);
if (!gs)
return -ENOMEM;
gs->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(gs->base))
return PTR_ERR(gs->base);
gc = &gs->gc;
ret = bgpio_init(gc, dev, 8,
gs->base + MLXBF_GPIO_PIN_STATE,
NULL,
NULL,
gs->base + MLXBF_GPIO_PIN_DIR_O,
gs->base + MLXBF_GPIO_PIN_DIR_I,
0);
if (ret)
return -ENODEV;
gc->owner = THIS_MODULE;
gc->ngpio = MLXBF_GPIO_NR;
ret = devm_gpiochip_add_data(dev, &gs->gc, gs);
if (ret) {
dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
return ret;
}
platform_set_drvdata(pdev, gs);
dev_info(&pdev->dev, "registered Mellanox BlueField GPIO");
return 0;
}
#ifdef CONFIG_PM
static int mlxbf_gpio_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mlxbf_gpio_state *gs = platform_get_drvdata(pdev);
gs->csave_regs.scratchpad = readq(gs->base + MLXBF_GPIO_SCRATCHPAD);
gs->csave_regs.pad_control[0] =
readq(gs->base + MLXBF_GPIO_PAD_CONTROL_FIRST_WORD);
gs->csave_regs.pad_control[1] =
readq(gs->base + MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD);
gs->csave_regs.pad_control[2] =
readq(gs->base + MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD);
gs->csave_regs.pad_control[3] =
readq(gs->base + MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD);
gs->csave_regs.pin_dir_i = readq(gs->base + MLXBF_GPIO_PIN_DIR_I);
gs->csave_regs.pin_dir_o = readq(gs->base + MLXBF_GPIO_PIN_DIR_O);
return 0;
}
static int mlxbf_gpio_resume(struct platform_device *pdev)
{
struct mlxbf_gpio_state *gs = platform_get_drvdata(pdev);
writeq(gs->csave_regs.scratchpad, gs->base + MLXBF_GPIO_SCRATCHPAD);
writeq(gs->csave_regs.pad_control[0],
gs->base + MLXBF_GPIO_PAD_CONTROL_FIRST_WORD);
writeq(gs->csave_regs.pad_control[1],
gs->base + MLXBF_GPIO_PAD_CONTROL_1_FIRST_WORD);
writeq(gs->csave_regs.pad_control[2],
gs->base + MLXBF_GPIO_PAD_CONTROL_2_FIRST_WORD);
writeq(gs->csave_regs.pad_control[3],
gs->base + MLXBF_GPIO_PAD_CONTROL_3_FIRST_WORD);
writeq(gs->csave_regs.pin_dir_i, gs->base + MLXBF_GPIO_PIN_DIR_I);
writeq(gs->csave_regs.pin_dir_o, gs->base + MLXBF_GPIO_PIN_DIR_O);
return 0;
}
#endif
static const struct acpi_device_id mlxbf_gpio_acpi_match[] = {
{ "MLNXBF02", 0 },
{}
};
MODULE_DEVICE_TABLE(acpi, mlxbf_gpio_acpi_match);
static struct platform_driver mlxbf_gpio_driver = {
.driver = {
.name = "mlxbf_gpio",
.acpi_match_table = ACPI_PTR(mlxbf_gpio_acpi_match),
},
.probe = mlxbf_gpio_probe,
#ifdef CONFIG_PM
.suspend = mlxbf_gpio_suspend,
.resume = mlxbf_gpio_resume,
#endif
};
module_platform_driver(mlxbf_gpio_driver);
MODULE_DESCRIPTION("Mellanox BlueField GPIO Driver");
MODULE_AUTHOR("Mellanox Technologies");
MODULE_LICENSE("GPL");