mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Thomas Gleixner](/assets/img/avatar_default.png)
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
494 lines
14 KiB
C
494 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* National Semiconductor NS87560UBD Super I/O controller used in
|
|
* HP [BCJ]x000 workstations.
|
|
*
|
|
* This chip is a horrid piece of engineering, and National
|
|
* denies any knowledge of its existence. Thus no datasheet is
|
|
* available off www.national.com.
|
|
*
|
|
* (C) Copyright 2000 Linuxcare, Inc.
|
|
* (C) Copyright 2000 Linuxcare Canada, Inc.
|
|
* (C) Copyright 2000 Martin K. Petersen <mkp@linuxcare.com>
|
|
* (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
|
|
* (C) Copyright 2001 John Marvin <jsm fc hp com>
|
|
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
|
|
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
|
|
* (C) Copyright 2006 Helge Deller <deller@gmx.de>
|
|
*
|
|
* The initial version of this is by Martin Peterson. Alex deVries
|
|
* has spent a bit of time trying to coax it into working.
|
|
*
|
|
* Major changes to get basic interrupt infrastructure working to
|
|
* hopefully be able to support all SuperIO devices. Currently
|
|
* works with serial. -- John Marvin <jsm@fc.hp.com>
|
|
*
|
|
* Converted superio_init() to be a PCI_FIXUP_FINAL callee.
|
|
* -- Kyle McMartin <kyle@parisc-linux.org>
|
|
*/
|
|
|
|
|
|
/* NOTES:
|
|
*
|
|
* Function 0 is an IDE controller. It is identical to a PC87415 IDE
|
|
* controller (and identifies itself as such).
|
|
*
|
|
* Function 1 is a "Legacy I/O" controller. Under this function is a
|
|
* whole mess of legacy I/O peripherals. Of course, HP hasn't enabled
|
|
* all the functionality in hardware, but the following is available:
|
|
*
|
|
* Two 16550A compatible serial controllers
|
|
* An IEEE 1284 compatible parallel port
|
|
* A floppy disk controller
|
|
*
|
|
* Function 2 is a USB controller.
|
|
*
|
|
* We must be incredibly careful during initialization. Since all
|
|
* interrupts are routed through function 1 (which is not allowed by
|
|
* the PCI spec), we need to program the PICs on the legacy I/O port
|
|
* *before* we attempt to set up IDE and USB. @#$!&
|
|
*
|
|
* According to HP, devices are only enabled by firmware if they have
|
|
* a physical device connected.
|
|
*
|
|
* Configuration register bits:
|
|
* 0x5A: FDC, SP1, IDE1, SP2, IDE2, PAR, Reserved, P92
|
|
* 0x5B: RTC, 8259, 8254, DMA1, DMA2, KBC, P61, APM
|
|
*
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/parport_pc.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/superio.h>
|
|
|
|
static struct superio_device sio_dev;
|
|
|
|
|
|
#undef DEBUG_SUPERIO_INIT
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
#define DBG_INIT(x...) printk(x)
|
|
#else
|
|
#define DBG_INIT(x...)
|
|
#endif
|
|
|
|
#define SUPERIO "SuperIO"
|
|
#define PFX SUPERIO ": "
|
|
|
|
static irqreturn_t
|
|
superio_interrupt(int parent_irq, void *devp)
|
|
{
|
|
u8 results;
|
|
u8 local_irq;
|
|
|
|
/* Poll the 8259 to see if there's an interrupt. */
|
|
outb (OCW3_POLL,IC_PIC1+0);
|
|
|
|
results = inb(IC_PIC1+0);
|
|
|
|
/*
|
|
* Bit 7: 1 = active Interrupt; 0 = no Interrupt pending
|
|
* Bits 6-3: zero
|
|
* Bits 2-0: highest priority, active requesting interrupt ID (0-7)
|
|
*/
|
|
if ((results & 0x80) == 0) {
|
|
/* I suspect "spurious" interrupts are from unmasking an IRQ.
|
|
* We don't know if an interrupt was/is pending and thus
|
|
* just call the handler for that IRQ as if it were pending.
|
|
*/
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Check to see which device is interrupting */
|
|
local_irq = results & 0x0f;
|
|
|
|
if (local_irq == 2 || local_irq > 7) {
|
|
printk(KERN_ERR PFX "slave interrupted!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (local_irq == 7) {
|
|
|
|
/* Could be spurious. Check in service bits */
|
|
|
|
outb(OCW3_ISR,IC_PIC1+0);
|
|
results = inb(IC_PIC1+0);
|
|
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
|
|
printk(KERN_WARNING PFX "spurious interrupt!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Call the appropriate device's interrupt */
|
|
generic_handle_irq(local_irq);
|
|
|
|
/* set EOI - forces a new interrupt if a lower priority device
|
|
* still needs service.
|
|
*/
|
|
outb((OCW2_SEOI|local_irq),IC_PIC1 + 0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Initialize Super I/O device */
|
|
static void
|
|
superio_init(struct pci_dev *pcidev)
|
|
{
|
|
struct superio_device *sio = &sio_dev;
|
|
struct pci_dev *pdev = sio->lio_pdev;
|
|
u16 word;
|
|
int ret;
|
|
|
|
if (sio->suckyio_irq_enabled)
|
|
return;
|
|
|
|
BUG_ON(!pdev);
|
|
BUG_ON(!sio->usb_pdev);
|
|
|
|
/* use the IRQ iosapic found for USB INT D... */
|
|
pdev->irq = sio->usb_pdev->irq;
|
|
|
|
/* ...then properly fixup the USB to point at suckyio PIC */
|
|
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
|
|
|
|
printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n",
|
|
pci_name(pdev), pdev->irq);
|
|
|
|
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
|
|
sio->sp1_base &= ~1;
|
|
printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
|
|
sio->sp2_base &= ~1;
|
|
printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
|
|
sio->pp_base &= ~1;
|
|
printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
|
|
sio->fdc_base &= ~1;
|
|
printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
|
|
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
|
|
sio->acpi_base &= ~1;
|
|
printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
|
|
|
|
request_region (IC_PIC1, 0x1f, "pic1");
|
|
request_region (IC_PIC2, 0x1f, "pic2");
|
|
request_region (sio->acpi_base, 0x1f, "acpi");
|
|
|
|
/* Enable the legacy I/O function */
|
|
pci_read_config_word (pdev, PCI_COMMAND, &word);
|
|
word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
|
|
pci_write_config_word (pdev, PCI_COMMAND, word);
|
|
|
|
pci_set_master (pdev);
|
|
ret = pci_enable_device(pdev);
|
|
BUG_ON(ret < 0); /* not too much we can do about this... */
|
|
|
|
/*
|
|
* Next project is programming the onboard interrupt controllers.
|
|
* PDC hasn't done this for us, since it's using polled I/O.
|
|
*
|
|
* XXX Use dword writes to avoid bugs in Elroy or Suckyio Config
|
|
* space access. PCI is by nature a 32-bit bus and config
|
|
* space can be sensitive to that.
|
|
*/
|
|
|
|
/* 0x64 - 0x67 :
|
|
DMA Rtg 2
|
|
DMA Rtg 3
|
|
DMA Chan Ctl
|
|
TRIGGER_1 == 0x82 USB & IDE level triggered, rest to edge
|
|
*/
|
|
pci_write_config_dword (pdev, 0x64, 0x82000000U);
|
|
|
|
/* 0x68 - 0x6b :
|
|
TRIGGER_2 == 0x00 all edge triggered (not used)
|
|
CFG_IR_SER == 0x43 SerPort1 = IRQ3, SerPort2 = IRQ4
|
|
CFG_IR_PF == 0x65 ParPort = IRQ5, FloppyCtlr = IRQ6
|
|
CFG_IR_IDE == 0x07 IDE1 = IRQ7, reserved
|
|
*/
|
|
pci_write_config_dword (pdev, TRIGGER_2, 0x07654300U);
|
|
|
|
/* 0x6c - 0x6f :
|
|
CFG_IR_INTAB == 0x00
|
|
CFG_IR_INTCD == 0x10 USB = IRQ1
|
|
CFG_IR_PS2 == 0x00
|
|
CFG_IR_FXBUS == 0x00
|
|
*/
|
|
pci_write_config_dword (pdev, CFG_IR_INTAB, 0x00001000U);
|
|
|
|
/* 0x70 - 0x73 :
|
|
CFG_IR_USB == 0x00 not used. USB is connected to INTD.
|
|
CFG_IR_ACPI == 0x00 not used.
|
|
DMA Priority == 0x4c88 Power on default value. NFC.
|
|
*/
|
|
pci_write_config_dword (pdev, CFG_IR_USB, 0x4c880000U);
|
|
|
|
/* PIC1 Initialization Command Word register programming */
|
|
outb (0x11,IC_PIC1+0); /* ICW1: ICW4 write req | ICW1 */
|
|
outb (0x00,IC_PIC1+1); /* ICW2: interrupt vector table - not used */
|
|
outb (0x04,IC_PIC1+1); /* ICW3: Cascade */
|
|
outb (0x01,IC_PIC1+1); /* ICW4: x86 mode */
|
|
|
|
/* PIC1 Program Operational Control Words */
|
|
outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
|
|
outb (0xc2,IC_PIC1+0); /* OCW2: priority (3-7,0-2) */
|
|
|
|
/* PIC2 Initialization Command Word register programming */
|
|
outb (0x11,IC_PIC2+0); /* ICW1: ICW4 write req | ICW1 */
|
|
outb (0x00,IC_PIC2+1); /* ICW2: N/A */
|
|
outb (0x02,IC_PIC2+1); /* ICW3: Slave ID code */
|
|
outb (0x01,IC_PIC2+1); /* ICW4: x86 mode */
|
|
|
|
/* Program Operational Control Words */
|
|
outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
|
|
outb (0x68,IC_PIC1+0); /* OCW3: OCW3 select | ESMM | SMM */
|
|
|
|
/* Write master mask reg */
|
|
outb (0xff,IC_PIC1+1);
|
|
|
|
/* Setup USB power regulation */
|
|
outb(1, sio->acpi_base + USB_REG_CR);
|
|
if (inb(sio->acpi_base + USB_REG_CR) & 1)
|
|
printk(KERN_INFO PFX "USB regulator enabled\n");
|
|
else
|
|
printk(KERN_ERR PFX "USB regulator not initialized!\n");
|
|
|
|
if (request_irq(pdev->irq, superio_interrupt, 0,
|
|
SUPERIO, (void *)sio)) {
|
|
|
|
printk(KERN_ERR PFX "could not get irq\n");
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
sio->suckyio_irq_enabled = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
|
|
|
|
static void superio_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u8 r8;
|
|
|
|
if ((irq < 1) || (irq == 2) || (irq > 7)) {
|
|
printk(KERN_ERR PFX "Illegal irq number.\n");
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
/* Mask interrupt */
|
|
|
|
r8 = inb(IC_PIC1+1);
|
|
r8 |= (1 << irq);
|
|
outb (r8,IC_PIC1+1);
|
|
}
|
|
|
|
static void superio_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u8 r8;
|
|
|
|
if ((irq < 1) || (irq == 2) || (irq > 7)) {
|
|
printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
/* Unmask interrupt */
|
|
r8 = inb(IC_PIC1+1);
|
|
r8 &= ~(1 << irq);
|
|
outb (r8,IC_PIC1+1);
|
|
}
|
|
|
|
static struct irq_chip superio_interrupt_type = {
|
|
.name = SUPERIO,
|
|
.irq_unmask = superio_unmask_irq,
|
|
.irq_mask = superio_mask_irq,
|
|
};
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
static unsigned short expected_device[3] = {
|
|
PCI_DEVICE_ID_NS_87415,
|
|
PCI_DEVICE_ID_NS_87560_LIO,
|
|
PCI_DEVICE_ID_NS_87560_USB
|
|
};
|
|
#endif
|
|
|
|
int superio_fixup_irq(struct pci_dev *pcidev)
|
|
{
|
|
int local_irq, i;
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
int fn;
|
|
fn = PCI_FUNC(pcidev->devfn);
|
|
|
|
/* Verify the function number matches the expected device id. */
|
|
if (expected_device[fn] != pcidev->device) {
|
|
BUG();
|
|
return -1;
|
|
}
|
|
printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n",
|
|
pci_name(pcidev),
|
|
pcidev->vendor, pcidev->device,
|
|
__builtin_return_address(0));
|
|
#endif
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
irq_set_chip_and_handler(i, &superio_interrupt_type,
|
|
handle_simple_irq);
|
|
}
|
|
|
|
/*
|
|
* We don't allocate a SuperIO irq for the legacy IO function,
|
|
* since it is a "bridge". Instead, we will allocate irq's for
|
|
* each legacy device as they are initialized.
|
|
*/
|
|
|
|
switch(pcidev->device) {
|
|
case PCI_DEVICE_ID_NS_87415: /* Function 0 */
|
|
local_irq = IDE_IRQ;
|
|
break;
|
|
case PCI_DEVICE_ID_NS_87560_LIO: /* Function 1 */
|
|
sio_dev.lio_pdev = pcidev; /* save for superio_init() */
|
|
return -1;
|
|
case PCI_DEVICE_ID_NS_87560_USB: /* Function 2 */
|
|
sio_dev.usb_pdev = pcidev; /* save for superio_init() */
|
|
local_irq = USB_IRQ;
|
|
break;
|
|
default:
|
|
local_irq = -1;
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
return local_irq;
|
|
}
|
|
|
|
static void __init superio_serial_init(void)
|
|
{
|
|
#ifdef CONFIG_SERIAL_8250
|
|
int retval;
|
|
struct uart_port serial_port;
|
|
|
|
memset(&serial_port, 0, sizeof(serial_port));
|
|
serial_port.iotype = UPIO_PORT;
|
|
serial_port.type = PORT_16550A;
|
|
serial_port.uartclk = 115200*16;
|
|
serial_port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE |
|
|
UPF_BOOT_AUTOCONF;
|
|
|
|
/* serial port #1 */
|
|
serial_port.iobase = sio_dev.sp1_base;
|
|
serial_port.irq = SP1_IRQ;
|
|
serial_port.line = 0;
|
|
retval = early_serial_setup(&serial_port);
|
|
if (retval < 0) {
|
|
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
|
|
return;
|
|
}
|
|
|
|
/* serial port #2 */
|
|
serial_port.iobase = sio_dev.sp2_base;
|
|
serial_port.irq = SP2_IRQ;
|
|
serial_port.line = 1;
|
|
retval = early_serial_setup(&serial_port);
|
|
if (retval < 0)
|
|
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
|
|
#endif /* CONFIG_SERIAL_8250 */
|
|
}
|
|
|
|
|
|
static void __init superio_parport_init(void)
|
|
{
|
|
#ifdef CONFIG_PARPORT_PC
|
|
if (!parport_pc_probe_port(sio_dev.pp_base,
|
|
0 /*base_hi*/,
|
|
PAR_IRQ,
|
|
PARPORT_DMA_NONE /* dma */,
|
|
NULL /*struct pci_dev* */,
|
|
0 /* shared irq flags */))
|
|
|
|
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
|
|
#endif /* CONFIG_PARPORT_PC */
|
|
}
|
|
|
|
|
|
static void superio_fixup_pci(struct pci_dev *pdev)
|
|
{
|
|
u8 prog;
|
|
|
|
pdev->class |= 0x5;
|
|
pci_write_config_byte(pdev, PCI_CLASS_PROG, pdev->class);
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
|
|
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
|
|
|
|
|
|
static int __init
|
|
superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct superio_device *sio = &sio_dev;
|
|
|
|
/*
|
|
** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
|
|
** superio_probe(00:0e.1) ven 0x100b dev 0xe sv 0x0 sd 0x0 class 0x68000
|
|
** superio_probe(00:0e.2) ven 0x100b dev 0x12 sv 0x0 sd 0x0 class 0xc0310
|
|
*/
|
|
DBG_INIT("superio_probe(%s) ven 0x%x dev 0x%x sv 0x%x sd 0x%x class 0x%x\n",
|
|
pci_name(dev),
|
|
dev->vendor, dev->device,
|
|
dev->subsystem_vendor, dev->subsystem_device,
|
|
dev->class);
|
|
|
|
BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
|
|
|
|
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
|
|
superio_parport_init();
|
|
superio_serial_init();
|
|
/* REVISIT XXX : superio_fdc_init() ? */
|
|
return 0;
|
|
} else if (dev->device == PCI_DEVICE_ID_NS_87415) { /* Function 0 */
|
|
DBG_INIT("superio_probe: ignoring IDE 87415\n");
|
|
} else if (dev->device == PCI_DEVICE_ID_NS_87560_USB) { /* Function 2 */
|
|
DBG_INIT("superio_probe: ignoring USB OHCI controller\n");
|
|
} else {
|
|
DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
|
|
}
|
|
|
|
/* Let appropriate other driver claim this device. */
|
|
return -ENODEV;
|
|
}
|
|
|
|
static const struct pci_device_id superio_tbl[] __initconst = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
|
|
{ 0, }
|
|
};
|
|
|
|
static struct pci_driver superio_driver __refdata = {
|
|
.name = SUPERIO,
|
|
.id_table = superio_tbl,
|
|
.probe = superio_probe,
|
|
};
|
|
|
|
module_pci_driver(superio_driver);
|