linux-stable/include/linux/fsl_devices.h
Kumar Gala d10f73480b [PPC] Fix compile failure do to introduction of PHY_POLL
PHY_POLL is defined in <linux/phy.h> include it in <linux/fsl_devices.h> so
board code will have it defined.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 23:26:16 -06:00

163 lines
4.6 KiB
C

/*
* include/linux/fsl_devices.h
*
* Definitions for any platform device related flags or structures for
* Freescale processor devices
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef _FSL_DEVICE_H_
#define _FSL_DEVICE_H_
#include <linux/types.h>
#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*
* unique device: a platform_device entry in fsl_plat_devs[] plus
* associated device information in its platform_data structure.
*
* A chip is described by a set of unique devices.
*
* Each sub-arch has its own master list of unique devices and
* enumerates them by enum fsl_devices in a sub-arch specific header
*
* The platform data structure is broken into two parts. The
* first is device specific information that help identify any
* unique features of a peripheral. The second is any
* information that may be defined by the board or how the device
* is connected externally of the chip.
*
* naming conventions:
* - platform data structures: <driver>_platform_data
* - platform data device flags: FSL_<driver>_DEV_<FLAG>
* - platform data board flags: FSL_<driver>_BRD_<FLAG>
*
*/
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
/* board specific information */
u32 board_flags;
u32 bus_id;
u32 phy_id;
u8 mac_addr[6];
};
struct gianfar_mdio_data {
/* board specific information */
int irq[32];
};
/* Flags related to gianfar device features */
#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001
#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002
#define FSL_GIANFAR_DEV_HAS_RMON 0x00000004
#define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008
#define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010
#define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020
#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040
#define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080
/* Flags in gianfar_platform_data */
#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
struct fsl_i2c_platform_data {
/* device specific information */
u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
FSL_USB2_DR_DEVICE,
FSL_USB2_DR_OTG,
};
enum fsl_usb2_phy_modes {
FSL_USB2_PHY_NONE,
FSL_USB2_PHY_ULPI,
FSL_USB2_PHY_UTMI,
FSL_USB2_PHY_UTMI_WIDE,
FSL_USB2_PHY_SERIAL,
};
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
u16 bus_num;
/* board specific information */
u16 max_chipselect;
void (*activate_cs)(u8 cs, u8 polarity);
void (*deactivate_cs)(u8 cs, u8 polarity);
u32 sysclk;
};
/* Ethernet interface (phy management and speed)
*/
enum enet_interface {
ENET_10_MII, /* 10 Base T, MII interface */
ENET_10_RMII, /* 10 Base T, RMII interface */
ENET_10_RGMII, /* 10 Base T, RGMII interface */
ENET_100_MII, /* 100 Base T, MII interface */
ENET_100_RMII, /* 100 Base T, RMII interface */
ENET_100_RGMII, /* 100 Base T, RGMII interface */
ENET_1000_GMII, /* 1000 Base T, GMII interface */
ENET_1000_RGMII, /* 1000 Base T, RGMII interface */
ENET_1000_TBI, /* 1000 Base T, TBI interface */
ENET_1000_RTBI /* 1000 Base T, RTBI interface */
};
struct ucc_geth_platform_data {
/* device specific information */
u32 device_flags;
u32 phy_reg_addr;
/* board specific information */
u32 board_flags;
u8 rx_clock;
u8 tx_clock;
u32 phy_id;
enum enet_interface phy_interface;
u32 phy_interrupt;
u8 mac_addr[6];
};
/* Flags related to UCC Gigabit Ethernet device features */
#define FSL_UGETH_DEV_HAS_GIGABIT 0x00000001
#define FSL_UGETH_DEV_HAS_COALESCE 0x00000002
#define FSL_UGETH_DEV_HAS_RMON 0x00000004
/* Flags in ucc_geth_platform_data */
#define FSL_UGETH_BRD_HAS_PHY_INTR 0x00000001
/* if not set use a timer */
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */