mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-05 00:20:32 +00:00
8a39e9fa57
The DSI pixel clocks are muxed from clocks generated in the analog phy by the DSI driver. In order to set them as parents, we need to do the same name lookup dance on them as we do for our root oscillator. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
58 lines
1.7 KiB
Text
58 lines
1.7 KiB
Text
Broadcom BCM2835 CPRMAN clocks
|
|
|
|
This binding uses the common clock binding:
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
The CPRMAN clock controller generates clocks in the audio power domain
|
|
of the BCM2835. There is a level of PLLs deriving from an external
|
|
oscillator, a level of PLL dividers that produce channels off of the
|
|
few PLLs, and a level of mostly-generic clock generators sourcing from
|
|
the PLL channels. Most other hardware components source from the
|
|
clock generators, but a few (like the ARM or HDMI) will source from
|
|
the PLL dividers directly.
|
|
|
|
Required properties:
|
|
- compatible: Should be "brcm,bcm2835-cprman"
|
|
- #clock-cells: Should be <1>. The permitted clock-specifier values can be
|
|
found in include/dt-bindings/clock/bcm2835.h
|
|
- reg: Specifies base physical address and size of the registers
|
|
- clocks: phandles to the parent clocks used as input to the module, in
|
|
the following order:
|
|
|
|
- External oscillator
|
|
- DSI0 byte clock
|
|
- DSI0 DDR2 clock
|
|
- DSI0 DDR clock
|
|
- DSI1 byte clock
|
|
- DSI1 DDR2 clock
|
|
- DSI1 DDR clock
|
|
|
|
Only external oscillator is required. The DSI clocks may
|
|
not be present, in which case their children will be
|
|
unusable.
|
|
|
|
Example:
|
|
|
|
clk_osc: clock@3 {
|
|
compatible = "fixed-clock";
|
|
reg = <3>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "osc";
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
clocks: cprman@7e101000 {
|
|
compatible = "brcm,bcm2835-cprman";
|
|
#clock-cells = <1>;
|
|
reg = <0x7e101000 0x2000>;
|
|
clocks = <&clk_osc>;
|
|
};
|
|
|
|
i2c0: i2c@7e205000 {
|
|
compatible = "brcm,bcm2835-i2c";
|
|
reg = <0x7e205000 0x1000>;
|
|
interrupts = <2 21>;
|
|
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|