mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Thomas Gleixner](/assets/img/avatar_default.png)
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
558 lines
16 KiB
C
558 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/****************************************************************************
|
|
* Driver for Solarflare network controllers and boards
|
|
* Copyright 2006-2011 Solarflare Communications Inc.
|
|
*/
|
|
|
|
/*
|
|
* Driver for Transwitch/Mysticom CX4 retimer
|
|
* see www.transwitch.com, part is TXC-43128
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include "efx.h"
|
|
#include "mdio_10g.h"
|
|
#include "phy.h"
|
|
#include "nic.h"
|
|
|
|
/* We expect these MMDs to be in the package */
|
|
#define TXC_REQUIRED_DEVS (MDIO_DEVS_PCS | \
|
|
MDIO_DEVS_PMAPMD | \
|
|
MDIO_DEVS_PHYXS)
|
|
|
|
#define TXC_LOOPBACKS ((1 << LOOPBACK_PCS) | \
|
|
(1 << LOOPBACK_PMAPMD) | \
|
|
(1 << LOOPBACK_PHYXS_WS))
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Compile-time config
|
|
*
|
|
**************************************************************************
|
|
*/
|
|
#define TXCNAME "TXC43128"
|
|
/* Total length of time we'll wait for the PHY to come out of reset (ms) */
|
|
#define TXC_MAX_RESET_TIME 500
|
|
/* Interval between checks (ms) */
|
|
#define TXC_RESET_WAIT 10
|
|
/* How long to run BIST (us) */
|
|
#define TXC_BIST_DURATION 50
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Register definitions
|
|
*
|
|
**************************************************************************
|
|
*/
|
|
|
|
/* Command register */
|
|
#define TXC_GLRGS_GLCMD 0xc004
|
|
/* Useful bits in command register */
|
|
/* Lane power-down */
|
|
#define TXC_GLCMD_L01PD_LBN 5
|
|
#define TXC_GLCMD_L23PD_LBN 6
|
|
/* Limited SW reset: preserves configuration but
|
|
* initiates a logic reset. Self-clearing */
|
|
#define TXC_GLCMD_LMTSWRST_LBN 14
|
|
|
|
/* Signal Quality Control */
|
|
#define TXC_GLRGS_GSGQLCTL 0xc01a
|
|
/* Enable bit */
|
|
#define TXC_GSGQLCT_SGQLEN_LBN 15
|
|
/* Lane selection */
|
|
#define TXC_GSGQLCT_LNSL_LBN 13
|
|
#define TXC_GSGQLCT_LNSL_WIDTH 2
|
|
|
|
/* Analog TX control */
|
|
#define TXC_ALRGS_ATXCTL 0xc040
|
|
/* Lane power-down */
|
|
#define TXC_ATXCTL_TXPD3_LBN 15
|
|
#define TXC_ATXCTL_TXPD2_LBN 14
|
|
#define TXC_ATXCTL_TXPD1_LBN 13
|
|
#define TXC_ATXCTL_TXPD0_LBN 12
|
|
|
|
/* Amplitude on lanes 0, 1 */
|
|
#define TXC_ALRGS_ATXAMP0 0xc041
|
|
/* Amplitude on lanes 2, 3 */
|
|
#define TXC_ALRGS_ATXAMP1 0xc042
|
|
/* Bit position of value for lane 0 (or 2) */
|
|
#define TXC_ATXAMP_LANE02_LBN 3
|
|
/* Bit position of value for lane 1 (or 3) */
|
|
#define TXC_ATXAMP_LANE13_LBN 11
|
|
|
|
#define TXC_ATXAMP_1280_mV 0
|
|
#define TXC_ATXAMP_1200_mV 8
|
|
#define TXC_ATXAMP_1120_mV 12
|
|
#define TXC_ATXAMP_1060_mV 14
|
|
#define TXC_ATXAMP_0820_mV 25
|
|
#define TXC_ATXAMP_0720_mV 26
|
|
#define TXC_ATXAMP_0580_mV 27
|
|
#define TXC_ATXAMP_0440_mV 28
|
|
|
|
#define TXC_ATXAMP_0820_BOTH \
|
|
((TXC_ATXAMP_0820_mV << TXC_ATXAMP_LANE02_LBN) \
|
|
| (TXC_ATXAMP_0820_mV << TXC_ATXAMP_LANE13_LBN))
|
|
|
|
#define TXC_ATXAMP_DEFAULT 0x6060 /* From databook */
|
|
|
|
/* Preemphasis on lanes 0, 1 */
|
|
#define TXC_ALRGS_ATXPRE0 0xc043
|
|
/* Preemphasis on lanes 2, 3 */
|
|
#define TXC_ALRGS_ATXPRE1 0xc044
|
|
|
|
#define TXC_ATXPRE_NONE 0
|
|
#define TXC_ATXPRE_DEFAULT 0x1010 /* From databook */
|
|
|
|
#define TXC_ALRGS_ARXCTL 0xc045
|
|
/* Lane power-down */
|
|
#define TXC_ARXCTL_RXPD3_LBN 15
|
|
#define TXC_ARXCTL_RXPD2_LBN 14
|
|
#define TXC_ARXCTL_RXPD1_LBN 13
|
|
#define TXC_ARXCTL_RXPD0_LBN 12
|
|
|
|
/* Main control */
|
|
#define TXC_MRGS_CTL 0xc340
|
|
/* Bits in main control */
|
|
#define TXC_MCTL_RESET_LBN 15 /* Self clear */
|
|
#define TXC_MCTL_TXLED_LBN 14 /* 1 to show align status */
|
|
#define TXC_MCTL_RXLED_LBN 13 /* 1 to show align status */
|
|
|
|
/* GPIO output */
|
|
#define TXC_GPIO_OUTPUT 0xc346
|
|
#define TXC_GPIO_DIR 0xc348
|
|
|
|
/* Vendor-specific BIST registers */
|
|
#define TXC_BIST_CTL 0xc280
|
|
#define TXC_BIST_TXFRMCNT 0xc281
|
|
#define TXC_BIST_RX0FRMCNT 0xc282
|
|
#define TXC_BIST_RX1FRMCNT 0xc283
|
|
#define TXC_BIST_RX2FRMCNT 0xc284
|
|
#define TXC_BIST_RX3FRMCNT 0xc285
|
|
#define TXC_BIST_RX0ERRCNT 0xc286
|
|
#define TXC_BIST_RX1ERRCNT 0xc287
|
|
#define TXC_BIST_RX2ERRCNT 0xc288
|
|
#define TXC_BIST_RX3ERRCNT 0xc289
|
|
|
|
/* BIST type (controls bit patter in test) */
|
|
#define TXC_BIST_CTRL_TYPE_LBN 10
|
|
#define TXC_BIST_CTRL_TYPE_TSD 0 /* TranSwitch Deterministic */
|
|
#define TXC_BIST_CTRL_TYPE_CRP 1 /* CRPAT standard */
|
|
#define TXC_BIST_CTRL_TYPE_CJP 2 /* CJPAT standard */
|
|
#define TXC_BIST_CTRL_TYPE_TSR 3 /* TranSwitch pseudo-random */
|
|
/* Set this to 1 for 10 bit and 0 for 8 bit */
|
|
#define TXC_BIST_CTRL_B10EN_LBN 12
|
|
/* Enable BIST (write 0 to disable) */
|
|
#define TXC_BIST_CTRL_ENAB_LBN 13
|
|
/* Stop BIST (self-clears when stop complete) */
|
|
#define TXC_BIST_CTRL_STOP_LBN 14
|
|
/* Start BIST (cleared by writing 1 to STOP) */
|
|
#define TXC_BIST_CTRL_STRT_LBN 15
|
|
|
|
/* Mt. Diablo test configuration */
|
|
#define TXC_MTDIABLO_CTRL 0xc34f
|
|
#define TXC_MTDIABLO_CTRL_PMA_LOOP_LBN 10
|
|
|
|
struct txc43128_data {
|
|
unsigned long bug10934_timer;
|
|
enum ef4_phy_mode phy_mode;
|
|
enum ef4_loopback_mode loopback_mode;
|
|
};
|
|
|
|
/* The PHY sometimes needs a reset to bring the link back up. So long as
|
|
* it reports link down, we reset it every 5 seconds.
|
|
*/
|
|
#define BUG10934_RESET_INTERVAL (5 * HZ)
|
|
|
|
/* Perform a reset that doesn't clear configuration changes */
|
|
static void txc_reset_logic(struct ef4_nic *efx);
|
|
|
|
/* Set the output value of a gpio */
|
|
void falcon_txc_set_gpio_val(struct ef4_nic *efx, int pin, int on)
|
|
{
|
|
ef4_mdio_set_flag(efx, MDIO_MMD_PHYXS, TXC_GPIO_OUTPUT, 1 << pin, on);
|
|
}
|
|
|
|
/* Set up the GPIO direction register */
|
|
void falcon_txc_set_gpio_dir(struct ef4_nic *efx, int pin, int dir)
|
|
{
|
|
ef4_mdio_set_flag(efx, MDIO_MMD_PHYXS, TXC_GPIO_DIR, 1 << pin, dir);
|
|
}
|
|
|
|
/* Reset the PMA/PMD MMD. The documentation is explicit that this does a
|
|
* global reset (it's less clear what reset of other MMDs does).*/
|
|
static int txc_reset_phy(struct ef4_nic *efx)
|
|
{
|
|
int rc = ef4_mdio_reset_mmd(efx, MDIO_MMD_PMAPMD,
|
|
TXC_MAX_RESET_TIME / TXC_RESET_WAIT,
|
|
TXC_RESET_WAIT);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
/* Check that all the MMDs we expect are present and responding. */
|
|
rc = ef4_mdio_check_mmds(efx, TXC_REQUIRED_DEVS);
|
|
if (rc < 0)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
netif_err(efx, hw, efx->net_dev, TXCNAME ": reset timed out!\n");
|
|
return rc;
|
|
}
|
|
|
|
/* Run a single BIST on one MMD */
|
|
static int txc_bist_one(struct ef4_nic *efx, int mmd, int test)
|
|
{
|
|
int ctrl, bctl;
|
|
int lane;
|
|
int rc = 0;
|
|
|
|
/* Set PMA to test into loopback using Mt Diablo reg as per app note */
|
|
ctrl = ef4_mdio_read(efx, MDIO_MMD_PCS, TXC_MTDIABLO_CTRL);
|
|
ctrl |= (1 << TXC_MTDIABLO_CTRL_PMA_LOOP_LBN);
|
|
ef4_mdio_write(efx, MDIO_MMD_PCS, TXC_MTDIABLO_CTRL, ctrl);
|
|
|
|
/* The BIST app. note lists these as 3 distinct steps. */
|
|
/* Set the BIST type */
|
|
bctl = (test << TXC_BIST_CTRL_TYPE_LBN);
|
|
ef4_mdio_write(efx, mmd, TXC_BIST_CTL, bctl);
|
|
|
|
/* Set the BSTEN bit in the BIST Control register to enable */
|
|
bctl |= (1 << TXC_BIST_CTRL_ENAB_LBN);
|
|
ef4_mdio_write(efx, mmd, TXC_BIST_CTL, bctl);
|
|
|
|
/* Set the BSTRT bit in the BIST Control register */
|
|
ef4_mdio_write(efx, mmd, TXC_BIST_CTL,
|
|
bctl | (1 << TXC_BIST_CTRL_STRT_LBN));
|
|
|
|
/* Wait. */
|
|
udelay(TXC_BIST_DURATION);
|
|
|
|
/* Set the BSTOP bit in the BIST Control register */
|
|
bctl |= (1 << TXC_BIST_CTRL_STOP_LBN);
|
|
ef4_mdio_write(efx, mmd, TXC_BIST_CTL, bctl);
|
|
|
|
/* The STOP bit should go off when things have stopped */
|
|
while (bctl & (1 << TXC_BIST_CTRL_STOP_LBN))
|
|
bctl = ef4_mdio_read(efx, mmd, TXC_BIST_CTL);
|
|
|
|
/* Check all the error counts are 0 and all the frame counts are
|
|
non-zero */
|
|
for (lane = 0; lane < 4; lane++) {
|
|
int count = ef4_mdio_read(efx, mmd, TXC_BIST_RX0ERRCNT + lane);
|
|
if (count != 0) {
|
|
netif_err(efx, hw, efx->net_dev, TXCNAME": BIST error. "
|
|
"Lane %d had %d errs\n", lane, count);
|
|
rc = -EIO;
|
|
}
|
|
count = ef4_mdio_read(efx, mmd, TXC_BIST_RX0FRMCNT + lane);
|
|
if (count == 0) {
|
|
netif_err(efx, hw, efx->net_dev, TXCNAME": BIST error. "
|
|
"Lane %d got 0 frames\n", lane);
|
|
rc = -EIO;
|
|
}
|
|
}
|
|
|
|
if (rc == 0)
|
|
netif_info(efx, hw, efx->net_dev, TXCNAME": BIST pass\n");
|
|
|
|
/* Disable BIST */
|
|
ef4_mdio_write(efx, mmd, TXC_BIST_CTL, 0);
|
|
|
|
/* Turn off loopback */
|
|
ctrl &= ~(1 << TXC_MTDIABLO_CTRL_PMA_LOOP_LBN);
|
|
ef4_mdio_write(efx, MDIO_MMD_PCS, TXC_MTDIABLO_CTRL, ctrl);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int txc_bist(struct ef4_nic *efx)
|
|
{
|
|
return txc_bist_one(efx, MDIO_MMD_PCS, TXC_BIST_CTRL_TYPE_TSD);
|
|
}
|
|
|
|
/* Push the non-configurable defaults into the PHY. This must be
|
|
* done after every full reset */
|
|
static void txc_apply_defaults(struct ef4_nic *efx)
|
|
{
|
|
int mctrl;
|
|
|
|
/* Turn amplitude down and preemphasis off on the host side
|
|
* (PHY<->MAC) as this is believed less likely to upset Falcon
|
|
* and no adverse effects have been noted. It probably also
|
|
* saves a picowatt or two */
|
|
|
|
/* Turn off preemphasis */
|
|
ef4_mdio_write(efx, MDIO_MMD_PHYXS, TXC_ALRGS_ATXPRE0, TXC_ATXPRE_NONE);
|
|
ef4_mdio_write(efx, MDIO_MMD_PHYXS, TXC_ALRGS_ATXPRE1, TXC_ATXPRE_NONE);
|
|
|
|
/* Turn down the amplitude */
|
|
ef4_mdio_write(efx, MDIO_MMD_PHYXS,
|
|
TXC_ALRGS_ATXAMP0, TXC_ATXAMP_0820_BOTH);
|
|
ef4_mdio_write(efx, MDIO_MMD_PHYXS,
|
|
TXC_ALRGS_ATXAMP1, TXC_ATXAMP_0820_BOTH);
|
|
|
|
/* Set the line side amplitude and preemphasis to the databook
|
|
* defaults as an erratum causes them to be 0 on at least some
|
|
* PHY rev.s */
|
|
ef4_mdio_write(efx, MDIO_MMD_PMAPMD,
|
|
TXC_ALRGS_ATXPRE0, TXC_ATXPRE_DEFAULT);
|
|
ef4_mdio_write(efx, MDIO_MMD_PMAPMD,
|
|
TXC_ALRGS_ATXPRE1, TXC_ATXPRE_DEFAULT);
|
|
ef4_mdio_write(efx, MDIO_MMD_PMAPMD,
|
|
TXC_ALRGS_ATXAMP0, TXC_ATXAMP_DEFAULT);
|
|
ef4_mdio_write(efx, MDIO_MMD_PMAPMD,
|
|
TXC_ALRGS_ATXAMP1, TXC_ATXAMP_DEFAULT);
|
|
|
|
/* Set up the LEDs */
|
|
mctrl = ef4_mdio_read(efx, MDIO_MMD_PHYXS, TXC_MRGS_CTL);
|
|
|
|
/* Set the Green and Red LEDs to their default modes */
|
|
mctrl &= ~((1 << TXC_MCTL_TXLED_LBN) | (1 << TXC_MCTL_RXLED_LBN));
|
|
ef4_mdio_write(efx, MDIO_MMD_PHYXS, TXC_MRGS_CTL, mctrl);
|
|
|
|
/* Databook recommends doing this after configuration changes */
|
|
txc_reset_logic(efx);
|
|
|
|
falcon_board(efx)->type->init_phy(efx);
|
|
}
|
|
|
|
static int txc43128_phy_probe(struct ef4_nic *efx)
|
|
{
|
|
struct txc43128_data *phy_data;
|
|
|
|
/* Allocate phy private storage */
|
|
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
|
|
if (!phy_data)
|
|
return -ENOMEM;
|
|
efx->phy_data = phy_data;
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
|
|
efx->mdio.mmds = TXC_REQUIRED_DEVS;
|
|
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
|
|
|
|
efx->loopback_modes = TXC_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Initialisation entry point for this PHY driver */
|
|
static int txc43128_phy_init(struct ef4_nic *efx)
|
|
{
|
|
int rc;
|
|
|
|
rc = txc_reset_phy(efx);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = txc_bist(efx);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
txc_apply_defaults(efx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set the lane power down state in the global registers */
|
|
static void txc_glrgs_lane_power(struct ef4_nic *efx, int mmd)
|
|
{
|
|
int pd = (1 << TXC_GLCMD_L01PD_LBN) | (1 << TXC_GLCMD_L23PD_LBN);
|
|
int ctl = ef4_mdio_read(efx, mmd, TXC_GLRGS_GLCMD);
|
|
|
|
if (!(efx->phy_mode & PHY_MODE_LOW_POWER))
|
|
ctl &= ~pd;
|
|
else
|
|
ctl |= pd;
|
|
|
|
ef4_mdio_write(efx, mmd, TXC_GLRGS_GLCMD, ctl);
|
|
}
|
|
|
|
/* Set the lane power down state in the analog control registers */
|
|
static void txc_analog_lane_power(struct ef4_nic *efx, int mmd)
|
|
{
|
|
int txpd = (1 << TXC_ATXCTL_TXPD3_LBN) | (1 << TXC_ATXCTL_TXPD2_LBN)
|
|
| (1 << TXC_ATXCTL_TXPD1_LBN) | (1 << TXC_ATXCTL_TXPD0_LBN);
|
|
int rxpd = (1 << TXC_ARXCTL_RXPD3_LBN) | (1 << TXC_ARXCTL_RXPD2_LBN)
|
|
| (1 << TXC_ARXCTL_RXPD1_LBN) | (1 << TXC_ARXCTL_RXPD0_LBN);
|
|
int txctl = ef4_mdio_read(efx, mmd, TXC_ALRGS_ATXCTL);
|
|
int rxctl = ef4_mdio_read(efx, mmd, TXC_ALRGS_ARXCTL);
|
|
|
|
if (!(efx->phy_mode & PHY_MODE_LOW_POWER)) {
|
|
txctl &= ~txpd;
|
|
rxctl &= ~rxpd;
|
|
} else {
|
|
txctl |= txpd;
|
|
rxctl |= rxpd;
|
|
}
|
|
|
|
ef4_mdio_write(efx, mmd, TXC_ALRGS_ATXCTL, txctl);
|
|
ef4_mdio_write(efx, mmd, TXC_ALRGS_ARXCTL, rxctl);
|
|
}
|
|
|
|
static void txc_set_power(struct ef4_nic *efx)
|
|
{
|
|
/* According to the data book, all the MMDs can do low power */
|
|
ef4_mdio_set_mmds_lpower(efx,
|
|
!!(efx->phy_mode & PHY_MODE_LOW_POWER),
|
|
TXC_REQUIRED_DEVS);
|
|
|
|
/* Global register bank is in PCS, PHY XS. These control the host
|
|
* side and line side settings respectively. */
|
|
txc_glrgs_lane_power(efx, MDIO_MMD_PCS);
|
|
txc_glrgs_lane_power(efx, MDIO_MMD_PHYXS);
|
|
|
|
/* Analog register bank in PMA/PMD, PHY XS */
|
|
txc_analog_lane_power(efx, MDIO_MMD_PMAPMD);
|
|
txc_analog_lane_power(efx, MDIO_MMD_PHYXS);
|
|
}
|
|
|
|
static void txc_reset_logic_mmd(struct ef4_nic *efx, int mmd)
|
|
{
|
|
int val = ef4_mdio_read(efx, mmd, TXC_GLRGS_GLCMD);
|
|
int tries = 50;
|
|
|
|
val |= (1 << TXC_GLCMD_LMTSWRST_LBN);
|
|
ef4_mdio_write(efx, mmd, TXC_GLRGS_GLCMD, val);
|
|
while (--tries) {
|
|
val = ef4_mdio_read(efx, mmd, TXC_GLRGS_GLCMD);
|
|
if (!(val & (1 << TXC_GLCMD_LMTSWRST_LBN)))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
if (!tries)
|
|
netif_info(efx, hw, efx->net_dev,
|
|
TXCNAME " Logic reset timed out!\n");
|
|
}
|
|
|
|
/* Perform a logic reset. This preserves the configuration registers
|
|
* and is needed for some configuration changes to take effect */
|
|
static void txc_reset_logic(struct ef4_nic *efx)
|
|
{
|
|
/* The data sheet claims we can do the logic reset on either the
|
|
* PCS or the PHYXS and the result is a reset of both host- and
|
|
* line-side logic. */
|
|
txc_reset_logic_mmd(efx, MDIO_MMD_PCS);
|
|
}
|
|
|
|
static bool txc43128_phy_read_link(struct ef4_nic *efx)
|
|
{
|
|
return ef4_mdio_links_ok(efx, TXC_REQUIRED_DEVS);
|
|
}
|
|
|
|
static int txc43128_phy_reconfigure(struct ef4_nic *efx)
|
|
{
|
|
struct txc43128_data *phy_data = efx->phy_data;
|
|
enum ef4_phy_mode mode_change = efx->phy_mode ^ phy_data->phy_mode;
|
|
bool loop_change = LOOPBACK_CHANGED(phy_data, efx, TXC_LOOPBACKS);
|
|
|
|
if (efx->phy_mode & mode_change & PHY_MODE_TX_DISABLED) {
|
|
txc_reset_phy(efx);
|
|
txc_apply_defaults(efx);
|
|
falcon_reset_xaui(efx);
|
|
mode_change &= ~PHY_MODE_TX_DISABLED;
|
|
}
|
|
|
|
ef4_mdio_transmit_disable(efx);
|
|
ef4_mdio_phy_reconfigure(efx);
|
|
if (mode_change & PHY_MODE_LOW_POWER)
|
|
txc_set_power(efx);
|
|
|
|
/* The data sheet claims this is required after every reconfiguration
|
|
* (note at end of 7.1), but we mustn't do it when nothing changes as
|
|
* it glitches the link, and reconfigure gets called on link change,
|
|
* so we get an IRQ storm on link up. */
|
|
if (loop_change || mode_change)
|
|
txc_reset_logic(efx);
|
|
|
|
phy_data->phy_mode = efx->phy_mode;
|
|
phy_data->loopback_mode = efx->loopback_mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void txc43128_phy_fini(struct ef4_nic *efx)
|
|
{
|
|
/* Disable link events */
|
|
ef4_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0);
|
|
}
|
|
|
|
static void txc43128_phy_remove(struct ef4_nic *efx)
|
|
{
|
|
kfree(efx->phy_data);
|
|
efx->phy_data = NULL;
|
|
}
|
|
|
|
/* Periodic callback: this exists mainly to poll link status as we
|
|
* don't use LASI interrupts */
|
|
static bool txc43128_phy_poll(struct ef4_nic *efx)
|
|
{
|
|
struct txc43128_data *data = efx->phy_data;
|
|
bool was_up = efx->link_state.up;
|
|
|
|
efx->link_state.up = txc43128_phy_read_link(efx);
|
|
efx->link_state.speed = 10000;
|
|
efx->link_state.fd = true;
|
|
efx->link_state.fc = efx->wanted_fc;
|
|
|
|
if (efx->link_state.up || (efx->loopback_mode != LOOPBACK_NONE)) {
|
|
data->bug10934_timer = jiffies;
|
|
} else {
|
|
if (time_after_eq(jiffies, (data->bug10934_timer +
|
|
BUG10934_RESET_INTERVAL))) {
|
|
data->bug10934_timer = jiffies;
|
|
txc_reset_logic(efx);
|
|
}
|
|
}
|
|
|
|
return efx->link_state.up != was_up;
|
|
}
|
|
|
|
static const char *const txc43128_test_names[] = {
|
|
"bist"
|
|
};
|
|
|
|
static const char *txc43128_test_name(struct ef4_nic *efx, unsigned int index)
|
|
{
|
|
if (index < ARRAY_SIZE(txc43128_test_names))
|
|
return txc43128_test_names[index];
|
|
return NULL;
|
|
}
|
|
|
|
static int txc43128_run_tests(struct ef4_nic *efx, int *results, unsigned flags)
|
|
{
|
|
int rc;
|
|
|
|
if (!(flags & ETH_TEST_FL_OFFLINE))
|
|
return 0;
|
|
|
|
rc = txc_reset_phy(efx);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = txc_bist(efx);
|
|
txc_apply_defaults(efx);
|
|
results[0] = rc ? -1 : 1;
|
|
return rc;
|
|
}
|
|
|
|
static void txc43128_get_link_ksettings(struct ef4_nic *efx,
|
|
struct ethtool_link_ksettings *cmd)
|
|
{
|
|
mdio45_ethtool_ksettings_get(&efx->mdio, cmd);
|
|
}
|
|
|
|
const struct ef4_phy_operations falcon_txc_phy_ops = {
|
|
.probe = txc43128_phy_probe,
|
|
.init = txc43128_phy_init,
|
|
.reconfigure = txc43128_phy_reconfigure,
|
|
.poll = txc43128_phy_poll,
|
|
.fini = txc43128_phy_fini,
|
|
.remove = txc43128_phy_remove,
|
|
.get_link_ksettings = txc43128_get_link_ksettings,
|
|
.set_link_ksettings = ef4_mdio_set_link_ksettings,
|
|
.test_alive = ef4_mdio_test_alive,
|
|
.run_tests = txc43128_run_tests,
|
|
.test_name = txc43128_test_name,
|
|
};
|