linux-stable/drivers/crypto/qat/qat_4xxx/adf_drv.c
Giovanni Cabiddu 5ee52118ac crypto: qat - expose device state through sysfs for 4xxx
Expose the device state through an attribute in sysfs and allow to
change it. This is to stop and shutdown a QAT device in order to change
its configuration.

The state attribute has been added to a newly created `qat` attribute
group which will contain all _QAT specific_ attributes.

The logic that implements the sysfs entries is part of a new file,
adf_sysfs.c. This exposes an entry point to allow the driver to create
attributes.

The function that creates the sysfs attributes is called from the probe
function of the driver and not in the state machine init function to
allow the change of states even if the device is in the down state.

In order to restore the device configuration between a transition from
down to up, the function that configures the devices has been abstracted
into the HW data structure.

The `state` attribute is only exposed for qat_4xxx devices.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-08 15:15:59 +08:00

352 lines
8.8 KiB
C

// SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only)
/* Copyright(c) 2020 Intel Corporation */
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <adf_accel_devices.h>
#include <adf_cfg.h>
#include <adf_common_drv.h>
#include "adf_4xxx_hw_data.h"
#include "qat_crypto.h"
#include "adf_transport_access_macros.h"
static const struct pci_device_id adf_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, ADF_4XXX_PCI_DEVICE_ID), },
{ PCI_VDEVICE(INTEL, ADF_401XX_PCI_DEVICE_ID), },
{ }
};
MODULE_DEVICE_TABLE(pci, adf_pci_tbl);
static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
{
if (accel_dev->hw_device) {
adf_clean_hw_data_4xxx(accel_dev->hw_device);
accel_dev->hw_device = NULL;
}
adf_cfg_dev_remove(accel_dev);
debugfs_remove(accel_dev->debugfs_dir);
adf_devmgr_rm_dev(accel_dev, NULL);
}
static int adf_cfg_dev_init(struct adf_accel_dev *accel_dev)
{
const char *config;
int ret;
config = accel_dev->accel_id % 2 ? ADF_CFG_DC : ADF_CFG_CY;
ret = adf_cfg_section_add(accel_dev, ADF_GENERAL_SEC);
if (ret)
return ret;
/* Default configuration is crypto only for even devices
* and compression for odd devices
*/
ret = adf_cfg_add_key_value_param(accel_dev, ADF_GENERAL_SEC,
ADF_SERVICES_ENABLED, config,
ADF_STR);
if (ret)
return ret;
return 0;
}
int adf_crypto_dev_config(struct adf_accel_dev *accel_dev)
{
char key[ADF_CFG_MAX_KEY_LEN_IN_BYTES];
int banks = GET_MAX_BANKS(accel_dev);
int cpus = num_online_cpus();
unsigned long bank, val;
int instances;
int ret;
int i;
if (adf_hw_dev_has_crypto(accel_dev))
instances = min(cpus, banks / 2);
else
instances = 0;
ret = adf_cfg_section_add(accel_dev, ADF_KERNEL_SEC);
if (ret)
goto err;
ret = adf_cfg_section_add(accel_dev, "Accelerator0");
if (ret)
goto err;
for (i = 0; i < instances; i++) {
val = i;
bank = i * 2;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_BANK_NUM, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &bank, ADF_DEC);
if (ret)
goto err;
bank += 1;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_BANK_NUM, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &bank, ADF_DEC);
if (ret)
goto err;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_ETRMGR_CORE_AFFINITY,
i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_SIZE, i);
val = 128;
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = 512;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_SIZE, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = 0;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_TX, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = 0;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_TX, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = 1;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_ASYM_RX, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = 1;
snprintf(key, sizeof(key), ADF_CY "%d" ADF_RING_SYM_RX, i);
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC,
key, &val, ADF_DEC);
if (ret)
goto err;
val = ADF_COALESCING_DEF_TIME;
snprintf(key, sizeof(key), ADF_ETRMGR_COALESCE_TIMER_FORMAT, i);
ret = adf_cfg_add_key_value_param(accel_dev, "Accelerator0",
key, &val, ADF_DEC);
if (ret)
goto err;
}
val = i;
ret = adf_cfg_add_key_value_param(accel_dev, ADF_KERNEL_SEC, ADF_NUM_CY,
&val, ADF_DEC);
if (ret)
goto err;
set_bit(ADF_STATUS_CONFIGURED, &accel_dev->status);
return 0;
err:
dev_err(&GET_DEV(accel_dev), "Failed to start QAT accel dev\n");
return ret;
}
static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct adf_accel_dev *accel_dev;
struct adf_accel_pci *accel_pci_dev;
struct adf_hw_device_data *hw_data;
char name[ADF_DEVICE_NAME_LENGTH];
unsigned int i, bar_nr;
unsigned long bar_mask;
struct adf_bar *bar;
int ret;
if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
/*
* If the accelerator is connected to a node with no memory
* there is no point in using the accelerator since the remote
* memory transaction will be very slow.
*/
dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
return -EINVAL;
}
accel_dev = devm_kzalloc(&pdev->dev, sizeof(*accel_dev), GFP_KERNEL);
if (!accel_dev)
return -ENOMEM;
INIT_LIST_HEAD(&accel_dev->crypto_list);
accel_pci_dev = &accel_dev->accel_pci_dev;
accel_pci_dev->pci_dev = pdev;
/*
* Add accel device to accel table
* This should be called before adf_cleanup_accel is called
*/
if (adf_devmgr_add_dev(accel_dev, NULL)) {
dev_err(&pdev->dev, "Failed to add new accelerator device.\n");
return -EFAULT;
}
accel_dev->owner = THIS_MODULE;
/* Allocate and initialise device hardware meta-data structure */
hw_data = devm_kzalloc(&pdev->dev, sizeof(*hw_data), GFP_KERNEL);
if (!hw_data) {
ret = -ENOMEM;
goto out_err;
}
accel_dev->hw_device = hw_data;
adf_init_hw_data_4xxx(accel_dev->hw_device);
pci_read_config_byte(pdev, PCI_REVISION_ID, &accel_pci_dev->revid);
pci_read_config_dword(pdev, ADF_4XXX_FUSECTL4_OFFSET, &hw_data->fuses);
/* Get Accelerators and Accelerators Engines masks */
hw_data->accel_mask = hw_data->get_accel_mask(hw_data);
hw_data->ae_mask = hw_data->get_ae_mask(hw_data);
accel_pci_dev->sku = hw_data->get_sku(hw_data);
/* If the device has no acceleration engines then ignore it */
if (!hw_data->accel_mask || !hw_data->ae_mask ||
(~hw_data->ae_mask & 0x01)) {
dev_err(&pdev->dev, "No acceleration units found.\n");
ret = -EFAULT;
goto out_err;
}
/* Create dev top level debugfs entry */
snprintf(name, sizeof(name), "%s%s_%s", ADF_DEVICE_NAME_PREFIX,
hw_data->dev_class->name, pci_name(pdev));
accel_dev->debugfs_dir = debugfs_create_dir(name, NULL);
/* Create device configuration table */
ret = adf_cfg_dev_add(accel_dev);
if (ret)
goto out_err;
/* Enable PCI device */
ret = pcim_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "Can't enable PCI device.\n");
goto out_err;
}
/* Set DMA identifier */
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (ret) {
dev_err(&pdev->dev, "No usable DMA configuration.\n");
goto out_err;
}
ret = adf_cfg_dev_init(accel_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize configuration.\n");
goto out_err;
}
/* Get accelerator capabilities mask */
hw_data->accel_capabilities_mask = hw_data->get_accel_cap(accel_dev);
if (!hw_data->accel_capabilities_mask) {
dev_err(&pdev->dev, "Failed to get capabilities mask.\n");
goto out_err;
}
/* Find and map all the device's BARS */
bar_mask = pci_select_bars(pdev, IORESOURCE_MEM) & ADF_4XXX_BAR_MASK;
ret = pcim_iomap_regions_request_all(pdev, bar_mask, pci_name(pdev));
if (ret) {
dev_err(&pdev->dev, "Failed to map pci regions.\n");
goto out_err;
}
i = 0;
for_each_set_bit(bar_nr, &bar_mask, PCI_STD_NUM_BARS) {
bar = &accel_pci_dev->pci_bars[i++];
bar->virt_addr = pcim_iomap_table(pdev)[bar_nr];
}
pci_set_master(pdev);
adf_enable_aer(accel_dev);
if (pci_save_state(pdev)) {
dev_err(&pdev->dev, "Failed to save pci state.\n");
ret = -ENOMEM;
goto out_err_disable_aer;
}
ret = adf_sysfs_init(accel_dev);
if (ret)
goto out_err_disable_aer;
ret = adf_crypto_dev_config(accel_dev);
if (ret)
goto out_err_disable_aer;
ret = adf_dev_init(accel_dev);
if (ret)
goto out_err_dev_shutdown;
ret = adf_dev_start(accel_dev);
if (ret)
goto out_err_dev_stop;
return ret;
out_err_dev_stop:
adf_dev_stop(accel_dev);
out_err_dev_shutdown:
adf_dev_shutdown(accel_dev);
out_err_disable_aer:
adf_disable_aer(accel_dev);
out_err:
adf_cleanup_accel(accel_dev);
return ret;
}
static void adf_remove(struct pci_dev *pdev)
{
struct adf_accel_dev *accel_dev = adf_devmgr_pci_to_accel_dev(pdev);
if (!accel_dev) {
pr_err("QAT: Driver removal failed\n");
return;
}
adf_dev_stop(accel_dev);
adf_dev_shutdown(accel_dev);
adf_disable_aer(accel_dev);
adf_cleanup_accel(accel_dev);
}
static struct pci_driver adf_driver = {
.id_table = adf_pci_tbl,
.name = ADF_4XXX_DEVICE_NAME,
.probe = adf_probe,
.remove = adf_remove,
.sriov_configure = adf_sriov_configure,
.err_handler = &adf_err_handler,
};
module_pci_driver(adf_driver);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Intel");
MODULE_FIRMWARE(ADF_4XXX_FW);
MODULE_FIRMWARE(ADF_4XXX_MMP);
MODULE_DESCRIPTION("Intel(R) QuickAssist Technology");
MODULE_VERSION(ADF_DRV_VERSION);
MODULE_SOFTDEP("pre: crypto-intel_qat");