mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Muli Ben-Yehuda](/assets/img/avatar_default.png)
This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully also fixes Riku's and Andy's observed bugs. It is based on Yinghai Lu's and Andy Whitcroft's patches (thanks!) with some changes: - introduce pci_scan_bus_with_sysdata() and use it instead of pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will allocate the sysdata structure and then call pci_scan_bus(). - always allocate pci_sysdata dynamically. The whole point of this sysdata work is to make it easy to do root-bus specific things (e.g., support PCI domains and IOMMU's). I dislike using a default struct pci_sysdata in some places and a dynamically allocated pci_sysdata elsewhere - the potential for someone indavertantly changing the default structure is too high. - this patch only makes the minimal changes necessary, i.e., the NUMA node is always initialized to -1. Patches to do the right thing with regards to the NUMA node can build on top of this (either add a 'node' parameter to pci_scan_bus_with_sysdata() or just update the node when it becomes known). The patch was compile tested with various configurations (e.g., NUMAQ, VISWS) and run-time tested on i386 and x86-64. Unfortunately none of my machines exhibited the bugs so caveat emptor. Andy, could you please see if this fixes the NUMA issues you've seen? Riku, does this fix "pci=noacpi" on your laptop? Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <riku.seppala@kymp.net> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
126 lines
3.4 KiB
C
126 lines
3.4 KiB
C
#ifndef __x8664_PCI_H
|
|
#define __x8664_PCI_H
|
|
|
|
#include <asm/io.h>
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
struct pci_sysdata {
|
|
int node; /* NUMA node */
|
|
void* iommu; /* IOMMU private data */
|
|
};
|
|
|
|
extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
|
|
|
|
#ifdef CONFIG_CALGARY_IOMMU
|
|
static inline void* pci_iommu(struct pci_bus *bus)
|
|
{
|
|
struct pci_sysdata *sd = bus->sysdata;
|
|
return sd->iommu;
|
|
}
|
|
|
|
static inline void set_pci_iommu(struct pci_bus *bus, void *val)
|
|
{
|
|
struct pci_sysdata *sd = bus->sysdata;
|
|
sd->iommu = val;
|
|
}
|
|
#endif /* CONFIG_CALGARY_IOMMU */
|
|
|
|
#include <linux/mm.h> /* for struct page */
|
|
|
|
/* Can be used to override the logic in pci_scan_bus for skipping
|
|
already-configured bus numbers - to be used for buggy BIOSes
|
|
or architectures with incomplete PCI setup by the loader */
|
|
|
|
#ifdef CONFIG_PCI
|
|
extern unsigned int pcibios_assign_all_busses(void);
|
|
#else
|
|
#define pcibios_assign_all_busses() 0
|
|
#endif
|
|
#define pcibios_scan_all_fns(a, b) 0
|
|
|
|
extern unsigned long pci_mem_start;
|
|
#define PCIBIOS_MIN_IO 0x1000
|
|
#define PCIBIOS_MIN_MEM (pci_mem_start)
|
|
|
|
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
|
|
|
|
void pcibios_config_init(void);
|
|
struct pci_bus * pcibios_scan_root(int bus);
|
|
extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
|
|
extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
|
|
|
|
void pcibios_set_master(struct pci_dev *dev);
|
|
void pcibios_penalize_isa_irq(int irq, int active);
|
|
struct irq_routing_table *pcibios_get_irq_routing_table(void);
|
|
int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/scatterlist.h>
|
|
#include <linux/string.h>
|
|
#include <asm/page.h>
|
|
|
|
extern void pci_iommu_alloc(void);
|
|
extern int iommu_setup(char *opt);
|
|
|
|
/* The PCI address space does equal the physical memory
|
|
* address space. The networking and block device layers use
|
|
* this boolean for bounce buffer decisions
|
|
*
|
|
* On AMD64 it mostly equals, but we set it to zero if a hardware
|
|
* IOMMU (gart) of sotware IOMMU (swiotlb) is available.
|
|
*/
|
|
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
|
|
|
|
#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
|
|
|
|
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
|
|
dma_addr_t ADDR_NAME;
|
|
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
|
|
__u32 LEN_NAME;
|
|
#define pci_unmap_addr(PTR, ADDR_NAME) \
|
|
((PTR)->ADDR_NAME)
|
|
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
|
|
(((PTR)->ADDR_NAME) = (VAL))
|
|
#define pci_unmap_len(PTR, LEN_NAME) \
|
|
((PTR)->LEN_NAME)
|
|
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
|
|
(((PTR)->LEN_NAME) = (VAL))
|
|
|
|
#else
|
|
/* No IOMMU */
|
|
|
|
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
|
|
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
|
|
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
|
|
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
|
|
#define pci_unmap_len(PTR, LEN_NAME) (0)
|
|
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
|
|
|
|
#endif
|
|
|
|
#include <asm-generic/pci-dma-compat.h>
|
|
|
|
#ifdef CONFIG_PCI
|
|
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
|
|
enum pci_dma_burst_strategy *strat,
|
|
unsigned long *strategy_parameter)
|
|
{
|
|
*strat = PCI_DMA_BURST_INFINITY;
|
|
*strategy_parameter = ~0UL;
|
|
}
|
|
#endif
|
|
|
|
#define HAVE_PCI_MMAP
|
|
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
|
|
enum pci_mmap_state mmap_state, int write_combine);
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
/* generic pci stuff */
|
|
#ifdef CONFIG_PCI
|
|
#include <asm-generic/pci.h>
|
|
#endif
|
|
|
|
#endif /* __x8664_PCI_H */
|