mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 02:39:48 +00:00
![Jakub Kicinski](/assets/img/avatar_default.png)
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
574 lines
17 KiB
C
574 lines
17 KiB
C
/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
|
|
/*
|
|
Written 1996 by Russell Nelson, with reference to skeleton.c
|
|
written 1993-1994 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
The author may be reached at nelson@crynwr.com, Crynwr
|
|
Software, 11 Grant St., Potsdam, NY 13676
|
|
|
|
Changelog:
|
|
|
|
Mike Cruse : mcruse@cti-ltd.com
|
|
: Changes for Linux 2.0 compatibility.
|
|
: Added dev_id parameter in net_interrupt(),
|
|
: request_irq() and free_irq(). Just NULL for now.
|
|
|
|
Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
|
|
: in net_open() and net_close() so kerneld would know
|
|
: that the module is in use and wouldn't eject the
|
|
: driver prematurely.
|
|
|
|
Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
|
|
: as an example. Disabled autoprobing in init_module(),
|
|
: not a good thing to do to other devices while Linux
|
|
: is running from all accounts.
|
|
|
|
Alan Cox : Removed 1.2 support, added 2.1 extra counters.
|
|
|
|
David Huggins-Daines <dhd@debian.org>
|
|
|
|
Split this off into mac89x0.c, and gutted it of all parts which are
|
|
not relevant to the existing CS8900 cards on the Macintosh
|
|
(i.e. basically the Daynaport CS and LC cards). To be precise:
|
|
|
|
* Removed all the media-detection stuff, because these cards are
|
|
TP-only.
|
|
|
|
* Lobotomized the ISA interrupt bogosity, because these cards use
|
|
a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
|
|
|
|
* Basically eliminated everything not relevant to getting the
|
|
cards minimally functioning on the Macintosh.
|
|
|
|
I might add that these cards are badly designed even from the Mac
|
|
standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
|
|
I/O space and NuBus interrupts for these cards, but neglected to
|
|
provide anything even remotely resembling a NuBus ROM. Therefore we
|
|
have to probe for them in a brain-damaged ISA-like fashion.
|
|
|
|
Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
|
|
check kmalloc and release the allocated memory on failure in
|
|
mac89x0_probe and in init_module
|
|
use local_irq_{save,restore}(flags) in net_get_stat, not just
|
|
local_irq_{dis,en}able()
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
static const char version[] =
|
|
"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
|
|
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
Sources:
|
|
|
|
Crynwr packet driver epktisa.
|
|
|
|
Crystal Semiconductor data sheets.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/string.h>
|
|
#include <linux/nubus.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/gfp.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/hwtest.h>
|
|
#include <asm/macints.h>
|
|
|
|
#include "cs89x0.h"
|
|
|
|
static int debug = -1;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "debug message level");
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct net_local {
|
|
int msg_enable;
|
|
int chip_type; /* one of: CS8900, CS8920, CS8920M */
|
|
char chip_revision; /* revision letter of the chip ('A'...) */
|
|
int send_cmd; /* the propercommand used to send a packet. */
|
|
int rx_mode;
|
|
int curr_rx_cfg;
|
|
int send_underrun; /* keep track of how many underruns in a row we get */
|
|
};
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
static int net_open(struct net_device *dev);
|
|
static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static void net_rx(struct net_device *dev);
|
|
static int net_close(struct net_device *dev);
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev);
|
|
static int set_mac_address(struct net_device *dev, void *addr);
|
|
|
|
/* For reading/writing registers ISA-style */
|
|
static inline int
|
|
readreg_io(struct net_device *dev, int portno)
|
|
{
|
|
nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
|
|
return swab16(nubus_readw(dev->base_addr + DATA_PORT));
|
|
}
|
|
|
|
static inline void
|
|
writereg_io(struct net_device *dev, int portno, int value)
|
|
{
|
|
nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
|
|
nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
|
|
}
|
|
|
|
/* These are for reading/writing registers in shared memory */
|
|
static inline int
|
|
readreg(struct net_device *dev, int portno)
|
|
{
|
|
return swab16(nubus_readw(dev->mem_start + portno));
|
|
}
|
|
|
|
static inline void
|
|
writereg(struct net_device *dev, int portno, int value)
|
|
{
|
|
nubus_writew(swab16(value), dev->mem_start + portno);
|
|
}
|
|
|
|
static const struct net_device_ops mac89x0_netdev_ops = {
|
|
.ndo_open = net_open,
|
|
.ndo_stop = net_close,
|
|
.ndo_start_xmit = net_send_packet,
|
|
.ndo_get_stats = net_get_stats,
|
|
.ndo_set_rx_mode = set_multicast_list,
|
|
.ndo_set_mac_address = set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
/* Probe for the CS8900 card in slot E. We won't bother looking
|
|
anywhere else until we have a really good reason to do so. */
|
|
static int mac89x0_device_probe(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct net_local *lp;
|
|
int i, slot;
|
|
unsigned rev_type = 0;
|
|
unsigned long ioaddr;
|
|
unsigned short sig;
|
|
int err = -ENODEV;
|
|
struct nubus_rsrc *fres;
|
|
|
|
dev = alloc_etherdev(sizeof(struct net_local));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
/* We might have to parameterize this later */
|
|
slot = 0xE;
|
|
/* Get out now if there's a real NuBus card in slot E */
|
|
for_each_func_rsrc(fres)
|
|
if (fres->board->slot == slot)
|
|
goto out;
|
|
|
|
/* The pseudo-ISA bits always live at offset 0x300 (gee,
|
|
wonder why...) */
|
|
ioaddr = (unsigned long)
|
|
nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
|
|
{
|
|
int card_present;
|
|
|
|
card_present = (hwreg_present((void *)ioaddr + 4) &&
|
|
hwreg_present((void *)ioaddr + DATA_PORT));
|
|
if (!card_present)
|
|
goto out;
|
|
}
|
|
|
|
nubus_writew(0, ioaddr + ADD_PORT);
|
|
sig = nubus_readw(ioaddr + DATA_PORT);
|
|
if (sig != swab16(CHIP_EISA_ID_SIG))
|
|
goto out;
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
/* Initialize the net_device structure. */
|
|
lp = netdev_priv(dev);
|
|
|
|
lp->msg_enable = netif_msg_init(debug, 0);
|
|
|
|
/* Fill in the 'dev' fields. */
|
|
dev->base_addr = ioaddr;
|
|
dev->mem_start = (unsigned long)
|
|
nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
|
|
dev->mem_end = dev->mem_start + 0x1000;
|
|
|
|
/* Turn on shared memory */
|
|
writereg_io(dev, PP_BusCTL, MEMORY_ON);
|
|
|
|
/* get the chip type */
|
|
rev_type = readreg(dev, PRODUCT_ID_ADD);
|
|
lp->chip_type = rev_type &~ REVISON_BITS;
|
|
lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
|
|
|
|
/* Check the chip type and revision in order to set the correct send command
|
|
CS8920 revision C and CS8900 revision F can use the faster send. */
|
|
lp->send_cmd = TX_AFTER_381;
|
|
if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
|
|
lp->send_cmd = TX_NOW;
|
|
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
|
|
lp->send_cmd = TX_NOW;
|
|
|
|
netif_dbg(lp, drv, dev, "%s", version);
|
|
|
|
pr_info("cs89%c0%s rev %c found at %#8lx\n",
|
|
lp->chip_type == CS8900 ? '0' : '2',
|
|
lp->chip_type == CS8920M ? "M" : "",
|
|
lp->chip_revision, dev->base_addr);
|
|
|
|
/* Try to read the MAC address */
|
|
if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
|
|
pr_info("No EEPROM, giving up now.\n");
|
|
goto out1;
|
|
} else {
|
|
for (i = 0; i < ETH_ALEN; i += 2) {
|
|
/* Big-endian (why??!) */
|
|
unsigned short s = readreg(dev, PP_IA + i);
|
|
dev->dev_addr[i] = s >> 8;
|
|
dev->dev_addr[i+1] = s & 0xff;
|
|
}
|
|
}
|
|
|
|
dev->irq = SLOT2IRQ(slot);
|
|
|
|
/* print the IRQ and ethernet address. */
|
|
|
|
pr_info("MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq);
|
|
|
|
dev->netdev_ops = &mac89x0_netdev_ops;
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
return 0;
|
|
out1:
|
|
nubus_writew(0, dev->base_addr + ADD_PORT);
|
|
out:
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine should set everything up anew at each open, even
|
|
registers that "should" only need to be set once at boot, so that
|
|
there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int
|
|
net_open(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
/* Disable the interrupt for now */
|
|
writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
|
|
|
|
/* Grab the interrupt */
|
|
if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
|
|
return -EAGAIN;
|
|
|
|
/* Set up the IRQ - Apparently magic */
|
|
if (lp->chip_type == CS8900)
|
|
writereg(dev, PP_CS8900_ISAINT, 0);
|
|
else
|
|
writereg(dev, PP_CS8920_ISAINT, 0);
|
|
|
|
/* set the Ethernet address */
|
|
for (i=0; i < ETH_ALEN/2; i++)
|
|
writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
|
|
|
|
/* Turn on both receive and transmit operations */
|
|
writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
/* Receive only error free packets addressed to this card */
|
|
lp->rx_mode = 0;
|
|
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
|
|
|
|
lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
|
|
|
|
writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
|
|
|
|
writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
|
|
TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
|
|
|
|
writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
|
|
TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
|
|
|
|
/* now that we've got our act together, enable everything */
|
|
writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t
|
|
net_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
netif_dbg(lp, tx_queued, dev, "sent %d byte packet of type %x\n",
|
|
skb->len, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
|
|
skb->data[ETH_ALEN + ETH_ALEN + 1]);
|
|
|
|
/* keep the upload from being interrupted, since we
|
|
ask the chip to start transmitting before the
|
|
whole packet has been completely uploaded. */
|
|
local_irq_save(flags);
|
|
netif_stop_queue(dev);
|
|
|
|
/* initiate a transmit sequence */
|
|
writereg(dev, PP_TxCMD, lp->send_cmd);
|
|
writereg(dev, PP_TxLength, skb->len);
|
|
|
|
/* Test to see if the chip has allocated memory for the packet */
|
|
if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
|
|
/* Gasp! It hasn't. But that shouldn't happen since
|
|
we're waiting for TxOk, so return 1 and requeue this packet. */
|
|
local_irq_restore(flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Write the contents of the packet */
|
|
skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
|
|
skb->len+1);
|
|
|
|
local_irq_restore(flags);
|
|
dev_kfree_skb (skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* The typical workload of the driver:
|
|
Handle the network interface interrupts. */
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_local *lp;
|
|
int ioaddr, status;
|
|
|
|
ioaddr = dev->base_addr;
|
|
lp = netdev_priv(dev);
|
|
|
|
/* we MUST read all the events out of the ISQ, otherwise we'll never
|
|
get interrupted again. As a consequence, we can't have any limit
|
|
on the number of times we loop in the interrupt handler. The
|
|
hardware guarantees that eventually we'll run out of events. Of
|
|
course, if you're on a slow machine, and packets are arriving
|
|
faster than you can read them off, you're screwed. Hasta la
|
|
vista, baby! */
|
|
while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
|
|
netif_dbg(lp, intr, dev, "status=%04x\n", status);
|
|
switch(status & ISQ_EVENT_MASK) {
|
|
case ISQ_RECEIVER_EVENT:
|
|
/* Got a packet(s). */
|
|
net_rx(dev);
|
|
break;
|
|
case ISQ_TRANSMITTER_EVENT:
|
|
dev->stats.tx_packets++;
|
|
netif_wake_queue(dev);
|
|
if ((status & TX_OK) == 0)
|
|
dev->stats.tx_errors++;
|
|
if (status & TX_LOST_CRS)
|
|
dev->stats.tx_carrier_errors++;
|
|
if (status & TX_SQE_ERROR)
|
|
dev->stats.tx_heartbeat_errors++;
|
|
if (status & TX_LATE_COL)
|
|
dev->stats.tx_window_errors++;
|
|
if (status & TX_16_COL)
|
|
dev->stats.tx_aborted_errors++;
|
|
break;
|
|
case ISQ_BUFFER_EVENT:
|
|
if (status & READY_FOR_TX) {
|
|
/* we tried to transmit a packet earlier,
|
|
but inexplicably ran out of buffers.
|
|
That shouldn't happen since we only ever
|
|
load one packet. Shrug. Do the right
|
|
thing anyway. */
|
|
netif_wake_queue(dev);
|
|
}
|
|
if (status & TX_UNDERRUN) {
|
|
netif_dbg(lp, tx_err, dev, "transmit underrun\n");
|
|
lp->send_underrun++;
|
|
if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
|
|
else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
|
|
}
|
|
break;
|
|
case ISQ_RX_MISS_EVENT:
|
|
dev->stats.rx_missed_errors += (status >> 6);
|
|
break;
|
|
case ISQ_TX_COL_EVENT:
|
|
dev->stats.collisions += (status >> 6);
|
|
break;
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers. */
|
|
static void
|
|
net_rx(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
int status, length;
|
|
|
|
status = readreg(dev, PP_RxStatus);
|
|
if ((status & RX_OK) == 0) {
|
|
dev->stats.rx_errors++;
|
|
if (status & RX_RUNT)
|
|
dev->stats.rx_length_errors++;
|
|
if (status & RX_EXTRA_DATA)
|
|
dev->stats.rx_length_errors++;
|
|
if ((status & RX_CRC_ERROR) &&
|
|
!(status & (RX_EXTRA_DATA|RX_RUNT)))
|
|
/* per str 172 */
|
|
dev->stats.rx_crc_errors++;
|
|
if (status & RX_DRIBBLE)
|
|
dev->stats.rx_frame_errors++;
|
|
return;
|
|
}
|
|
|
|
length = readreg(dev, PP_RxLength);
|
|
/* Malloc up new buffer. */
|
|
skb = alloc_skb(length, GFP_ATOMIC);
|
|
if (skb == NULL) {
|
|
dev->stats.rx_dropped++;
|
|
return;
|
|
}
|
|
skb_put(skb, length);
|
|
|
|
skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
|
|
length);
|
|
|
|
netif_dbg(lp, rx_status, dev, "received %d byte packet of type %x\n",
|
|
length, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
|
|
skb->data[ETH_ALEN + ETH_ALEN + 1]);
|
|
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += length;
|
|
}
|
|
|
|
/* The inverse routine to net_open(). */
|
|
static int
|
|
net_close(struct net_device *dev)
|
|
{
|
|
|
|
writereg(dev, PP_RxCFG, 0);
|
|
writereg(dev, PP_TxCFG, 0);
|
|
writereg(dev, PP_BufCFG, 0);
|
|
writereg(dev, PP_BusCTL, 0);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Update the statistics here. */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* Get the current statistics. This may be called with the card open or
|
|
closed. */
|
|
static struct net_device_stats *
|
|
net_get_stats(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
/* Update the statistics from the device registers. */
|
|
dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
|
|
dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
|
|
local_irq_restore(flags);
|
|
|
|
return &dev->stats;
|
|
}
|
|
|
|
static void set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
if(dev->flags&IFF_PROMISC)
|
|
{
|
|
lp->rx_mode = RX_ALL_ACCEPT;
|
|
} else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
|
|
/* The multicast-accept list is initialized to accept-all, and we
|
|
rely on higher-level filtering for now. */
|
|
lp->rx_mode = RX_MULTCAST_ACCEPT;
|
|
}
|
|
else
|
|
lp->rx_mode = 0;
|
|
|
|
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
|
|
|
|
/* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
|
|
writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
|
|
(lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
|
|
}
|
|
|
|
|
|
static int set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *saddr = addr;
|
|
int i;
|
|
|
|
if (!is_valid_ether_addr(saddr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
eth_hw_addr_set(dev, saddr->sa_data);
|
|
netdev_info(dev, "Setting MAC address to %pM\n", dev->dev_addr);
|
|
|
|
/* set the Ethernet address */
|
|
for (i=0; i < ETH_ALEN/2; i++)
|
|
writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int mac89x0_device_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
|
|
unregister_netdev(dev);
|
|
nubus_writew(0, dev->base_addr + ADD_PORT);
|
|
free_netdev(dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mac89x0_platform_driver = {
|
|
.probe = mac89x0_device_probe,
|
|
.remove = mac89x0_device_remove,
|
|
.driver = {
|
|
.name = "mac89x0",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mac89x0_platform_driver);
|