mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 00:40:03 +00:00
![Wolfram Sang](/assets/img/avatar_default.png)
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
400 lines
10 KiB
C
400 lines
10 KiB
C
/*
|
|
* AVR32 SMC/CFC PATA Driver
|
|
*
|
|
* Copyright (C) 2007 Atmel Norway
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version
|
|
* 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#define DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/board.h>
|
|
#include <mach/smc.h>
|
|
|
|
#define DRV_NAME "pata_at32"
|
|
#define DRV_VERSION "0.0.3"
|
|
|
|
/*
|
|
* CompactFlash controller memory layout relative to the base address:
|
|
*
|
|
* Attribute memory: 0000 0000 -> 003f ffff
|
|
* Common memory: 0040 0000 -> 007f ffff
|
|
* I/O memory: 0080 0000 -> 00bf ffff
|
|
* True IDE Mode: 00c0 0000 -> 00df ffff
|
|
* Alt IDE Mode: 00e0 0000 -> 00ff ffff
|
|
*
|
|
* Only True IDE and Alt True IDE mode are needed for this driver.
|
|
*
|
|
* True IDE mode => CS0 = 0, CS1 = 1 (cmd, error, stat, etc)
|
|
* Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat)
|
|
*/
|
|
#define CF_IDE_OFFSET 0x00c00000
|
|
#define CF_ALT_IDE_OFFSET 0x00e00000
|
|
#define CF_RES_SIZE 2048
|
|
|
|
/*
|
|
* Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA
|
|
* adaptor with a logic analyzer or similar.
|
|
*/
|
|
#undef DEBUG_BUS
|
|
|
|
/*
|
|
* ATA PIO modes
|
|
*
|
|
* Name | Mb/s | Min cycle time | Mask
|
|
* --------+-------+----------------+--------
|
|
* Mode 0 | 3.3 | 600 ns | 0x01
|
|
* Mode 1 | 5.2 | 383 ns | 0x03
|
|
* Mode 2 | 8.3 | 240 ns | 0x07
|
|
* Mode 3 | 11.1 | 180 ns | 0x0f
|
|
* Mode 4 | 16.7 | 120 ns | 0x1f
|
|
*
|
|
* Alter PIO_MASK below according to table to set maximal PIO mode.
|
|
*/
|
|
enum {
|
|
PIO_MASK = ATA_PIO4,
|
|
};
|
|
|
|
/*
|
|
* Struct containing private information about device.
|
|
*/
|
|
struct at32_ide_info {
|
|
unsigned int irq;
|
|
struct resource res_ide;
|
|
struct resource res_alt;
|
|
void __iomem *ide_addr;
|
|
void __iomem *alt_addr;
|
|
unsigned int cs;
|
|
struct smc_config smc;
|
|
};
|
|
|
|
/*
|
|
* Setup SMC for the given ATA timing.
|
|
*/
|
|
static int pata_at32_setup_timing(struct device *dev,
|
|
struct at32_ide_info *info,
|
|
const struct ata_timing *ata)
|
|
{
|
|
struct smc_config *smc = &info->smc;
|
|
struct smc_timing timing;
|
|
|
|
int active;
|
|
int recover;
|
|
|
|
memset(&timing, 0, sizeof(struct smc_timing));
|
|
|
|
/* Total cycle time */
|
|
timing.read_cycle = ata->cyc8b;
|
|
|
|
/* DIOR <= CFIOR timings */
|
|
timing.nrd_setup = ata->setup;
|
|
timing.nrd_pulse = ata->act8b;
|
|
timing.nrd_recover = ata->rec8b;
|
|
|
|
/* Convert nanosecond timing to clock cycles */
|
|
smc_set_timing(smc, &timing);
|
|
|
|
/* Add one extra cycle setup due to signal ring */
|
|
smc->nrd_setup = smc->nrd_setup + 1;
|
|
|
|
active = smc->nrd_setup + smc->nrd_pulse;
|
|
recover = smc->read_cycle - active;
|
|
|
|
/* Need at least two cycles recovery */
|
|
if (recover < 2)
|
|
smc->read_cycle = active + 2;
|
|
|
|
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
|
|
smc->ncs_read_setup = 1;
|
|
smc->ncs_read_pulse = smc->read_cycle - 2;
|
|
|
|
/* Write timings same as read timings */
|
|
smc->write_cycle = smc->read_cycle;
|
|
smc->nwe_setup = smc->nrd_setup;
|
|
smc->nwe_pulse = smc->nrd_pulse;
|
|
smc->ncs_write_setup = smc->ncs_read_setup;
|
|
smc->ncs_write_pulse = smc->ncs_read_pulse;
|
|
|
|
/* Do some debugging output of ATA and SMC timings */
|
|
dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n",
|
|
ata->cyc8b, ata->setup, ata->act8b, ata->rec8b);
|
|
|
|
dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n",
|
|
smc->read_cycle, smc->nrd_setup, smc->nrd_pulse,
|
|
smc->ncs_read_setup, smc->ncs_read_pulse);
|
|
|
|
/* Finally, configure the SMC */
|
|
return smc_set_configuration(info->cs, smc);
|
|
}
|
|
|
|
/*
|
|
* Procedures for libATA.
|
|
*/
|
|
static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct ata_timing timing;
|
|
struct at32_ide_info *info = ap->host->private_data;
|
|
|
|
int ret;
|
|
|
|
/* Compute ATA timing */
|
|
ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
|
|
if (ret) {
|
|
dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
/* Setup SMC to ATA timing */
|
|
ret = pata_at32_setup_timing(ap->dev, info, &timing);
|
|
if (ret) {
|
|
dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static struct scsi_host_template at32_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations at32_port_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = pata_at32_set_piomode,
|
|
};
|
|
|
|
static int __init pata_at32_init_one(struct device *dev,
|
|
struct at32_ide_info *info)
|
|
{
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
|
|
host = ata_host_alloc(dev, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
ap = host->ports[0];
|
|
|
|
/* Setup ATA bindings */
|
|
ap->ops = &at32_port_ops;
|
|
ap->pio_mask = PIO_MASK;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS;
|
|
|
|
/*
|
|
* Since all 8-bit taskfile transfers has to go on the lower
|
|
* byte of the data bus and there is a bug in the SMC that
|
|
* makes it impossible to alter the bus width during runtime,
|
|
* we need to hardwire the address signals as follows:
|
|
*
|
|
* A_IDE(2:0) <= A_EBI(3:1)
|
|
*
|
|
* This makes all addresses on the EBI even, thus all data
|
|
* will be on the lower byte of the data bus. All addresses
|
|
* used by libATA need to be altered according to this.
|
|
*/
|
|
ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1);
|
|
ap->ioaddr.ctl_addr = info->alt_addr + (0x06 << 1);
|
|
|
|
ap->ioaddr.data_addr = info->ide_addr + (ATA_REG_DATA << 1);
|
|
ap->ioaddr.error_addr = info->ide_addr + (ATA_REG_ERR << 1);
|
|
ap->ioaddr.feature_addr = info->ide_addr + (ATA_REG_FEATURE << 1);
|
|
ap->ioaddr.nsect_addr = info->ide_addr + (ATA_REG_NSECT << 1);
|
|
ap->ioaddr.lbal_addr = info->ide_addr + (ATA_REG_LBAL << 1);
|
|
ap->ioaddr.lbam_addr = info->ide_addr + (ATA_REG_LBAM << 1);
|
|
ap->ioaddr.lbah_addr = info->ide_addr + (ATA_REG_LBAH << 1);
|
|
ap->ioaddr.device_addr = info->ide_addr + (ATA_REG_DEVICE << 1);
|
|
ap->ioaddr.status_addr = info->ide_addr + (ATA_REG_STATUS << 1);
|
|
ap->ioaddr.command_addr = info->ide_addr + (ATA_REG_CMD << 1);
|
|
|
|
/* Set info as private data of ATA host */
|
|
host->private_data = info;
|
|
|
|
/* Register ATA device and return */
|
|
return ata_host_activate(host, info->irq, ata_sff_interrupt,
|
|
IRQF_SHARED | IRQF_TRIGGER_RISING,
|
|
&at32_sht);
|
|
}
|
|
|
|
/*
|
|
* This function may come in handy for people analyzing their own
|
|
* EBI -> PATA adaptors.
|
|
*/
|
|
#ifdef DEBUG_BUS
|
|
|
|
static void __init pata_at32_debug_bus(struct device *dev,
|
|
struct at32_ide_info *info)
|
|
{
|
|
const int d1 = 0xff;
|
|
const int d2 = 0x00;
|
|
|
|
int i;
|
|
|
|
/* Write 8-bit values (registers) */
|
|
iowrite8(d1, info->alt_addr + (0x06 << 1));
|
|
iowrite8(d2, info->alt_addr + (0x06 << 1));
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
iowrite8(d1, info->ide_addr + (i << 1));
|
|
iowrite8(d2, info->ide_addr + (i << 1));
|
|
}
|
|
|
|
/* Write 16 bit values (data) */
|
|
iowrite16(d1, info->ide_addr);
|
|
iowrite16(d1 << 8, info->ide_addr);
|
|
|
|
iowrite16(d1, info->ide_addr);
|
|
iowrite16(d1 << 8, info->ide_addr);
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init pata_at32_probe(struct platform_device *pdev)
|
|
{
|
|
const struct ata_timing initial_timing =
|
|
{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
|
|
|
|
struct device *dev = &pdev->dev;
|
|
struct at32_ide_info *info;
|
|
struct ide_platform_data *board = dev_get_platdata(&pdev->dev);
|
|
struct resource *res;
|
|
|
|
int irq;
|
|
int ret;
|
|
|
|
if (!board)
|
|
return -ENXIO;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENXIO;
|
|
|
|
/* Retrive IRQ */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
/* Setup struct containing private information */
|
|
info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->irq = irq;
|
|
info->cs = board->cs;
|
|
|
|
/* Request memory resources */
|
|
info->res_ide.start = res->start + CF_IDE_OFFSET;
|
|
info->res_ide.end = info->res_ide.start + CF_RES_SIZE - 1;
|
|
info->res_ide.name = "ide";
|
|
info->res_ide.flags = IORESOURCE_MEM;
|
|
|
|
ret = request_resource(res, &info->res_ide);
|
|
if (ret)
|
|
goto err_req_res_ide;
|
|
|
|
info->res_alt.start = res->start + CF_ALT_IDE_OFFSET;
|
|
info->res_alt.end = info->res_alt.start + CF_RES_SIZE - 1;
|
|
info->res_alt.name = "alt";
|
|
info->res_alt.flags = IORESOURCE_MEM;
|
|
|
|
ret = request_resource(res, &info->res_alt);
|
|
if (ret)
|
|
goto err_req_res_alt;
|
|
|
|
/* Setup non-timing elements of SMC */
|
|
info->smc.bus_width = 2; /* 16 bit data bus */
|
|
info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */
|
|
info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */
|
|
info->smc.nwait_mode = 3; /* NWAIT is in READY mode */
|
|
info->smc.byte_write = 0; /* Byte select access type */
|
|
info->smc.tdf_mode = 0; /* TDF optimization disabled */
|
|
info->smc.tdf_cycles = 0; /* No TDF wait cycles */
|
|
|
|
/* Setup SMC to ATA timing */
|
|
ret = pata_at32_setup_timing(dev, info, &initial_timing);
|
|
if (ret)
|
|
goto err_setup_timing;
|
|
|
|
/* Map ATA address space */
|
|
ret = -ENOMEM;
|
|
info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16);
|
|
info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16);
|
|
if (!info->ide_addr || !info->alt_addr)
|
|
goto err_ioremap;
|
|
|
|
#ifdef DEBUG_BUS
|
|
pata_at32_debug_bus(dev, info);
|
|
#endif
|
|
|
|
/* Setup and register ATA device */
|
|
ret = pata_at32_init_one(dev, info);
|
|
if (ret)
|
|
goto err_ata_device;
|
|
|
|
return 0;
|
|
|
|
err_ata_device:
|
|
err_ioremap:
|
|
err_setup_timing:
|
|
release_resource(&info->res_alt);
|
|
err_req_res_alt:
|
|
release_resource(&info->res_ide);
|
|
err_req_res_ide:
|
|
kfree(info);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __exit pata_at32_remove(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(pdev);
|
|
struct at32_ide_info *info;
|
|
|
|
if (!host)
|
|
return 0;
|
|
|
|
info = host->private_data;
|
|
ata_host_detach(host);
|
|
|
|
if (!info)
|
|
return 0;
|
|
|
|
release_resource(&info->res_ide);
|
|
release_resource(&info->res_alt);
|
|
|
|
kfree(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:at32_ide");
|
|
|
|
static struct platform_driver pata_at32_driver = {
|
|
.remove = __exit_p(pata_at32_remove),
|
|
.driver = {
|
|
.name = "at32_ide",
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(pata_at32_driver, pata_at32_probe);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver");
|
|
MODULE_AUTHOR("Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>");
|
|
MODULE_VERSION(DRV_VERSION);
|