mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 00:40:03 +00:00
![Wolfram Sang](/assets/img/avatar_default.png)
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
286 lines
7 KiB
C
286 lines
7 KiB
C
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/amigahw.h>
|
|
|
|
#include "scsi.h"
|
|
#include "wd33c93.h"
|
|
#include "a3000.h"
|
|
|
|
|
|
struct a3000_hostdata {
|
|
struct WD33C93_hostdata wh;
|
|
struct a3000_scsiregs *regs;
|
|
};
|
|
|
|
static irqreturn_t a3000_intr(int irq, void *data)
|
|
{
|
|
struct Scsi_Host *instance = data;
|
|
struct a3000_hostdata *hdata = shost_priv(instance);
|
|
unsigned int status = hdata->regs->ISTR;
|
|
unsigned long flags;
|
|
|
|
if (!(status & ISTR_INT_P))
|
|
return IRQ_NONE;
|
|
if (status & ISTR_INTS) {
|
|
spin_lock_irqsave(instance->host_lock, flags);
|
|
wd33c93_intr(instance);
|
|
spin_unlock_irqrestore(instance->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
pr_warning("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
|
|
{
|
|
struct Scsi_Host *instance = cmd->device->host;
|
|
struct a3000_hostdata *hdata = shost_priv(instance);
|
|
struct WD33C93_hostdata *wh = &hdata->wh;
|
|
struct a3000_scsiregs *regs = hdata->regs;
|
|
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
|
|
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
|
|
|
|
/*
|
|
* if the physical address has the wrong alignment, or if
|
|
* physical address is bad, or if it is a write and at the
|
|
* end of a physical memory chunk, then allocate a bounce
|
|
* buffer
|
|
*/
|
|
if (addr & A3000_XFER_MASK) {
|
|
wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
|
|
wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
|
|
GFP_KERNEL);
|
|
|
|
/* can't allocate memory; use PIO */
|
|
if (!wh->dma_bounce_buffer) {
|
|
wh->dma_bounce_len = 0;
|
|
return 1;
|
|
}
|
|
|
|
if (!dir_in) {
|
|
/* copy to bounce buffer for a write */
|
|
memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
|
|
cmd->SCp.this_residual);
|
|
}
|
|
|
|
addr = virt_to_bus(wh->dma_bounce_buffer);
|
|
}
|
|
|
|
/* setup dma direction */
|
|
if (!dir_in)
|
|
cntr |= CNTR_DDIR;
|
|
|
|
/* remember direction */
|
|
wh->dma_dir = dir_in;
|
|
|
|
regs->CNTR = cntr;
|
|
|
|
/* setup DMA *physical* address */
|
|
regs->ACR = addr;
|
|
|
|
if (dir_in) {
|
|
/* invalidate any cache */
|
|
cache_clear(addr, cmd->SCp.this_residual);
|
|
} else {
|
|
/* push any dirty cache */
|
|
cache_push(addr, cmd->SCp.this_residual);
|
|
}
|
|
|
|
/* start DMA */
|
|
mb(); /* make sure setup is completed */
|
|
regs->ST_DMA = 1;
|
|
mb(); /* make sure DMA has started before next IO */
|
|
|
|
/* return success */
|
|
return 0;
|
|
}
|
|
|
|
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
|
|
int status)
|
|
{
|
|
struct a3000_hostdata *hdata = shost_priv(instance);
|
|
struct WD33C93_hostdata *wh = &hdata->wh;
|
|
struct a3000_scsiregs *regs = hdata->regs;
|
|
|
|
/* disable SCSI interrupts */
|
|
unsigned short cntr = CNTR_PDMD;
|
|
|
|
if (!wh->dma_dir)
|
|
cntr |= CNTR_DDIR;
|
|
|
|
regs->CNTR = cntr;
|
|
mb(); /* make sure CNTR is updated before next IO */
|
|
|
|
/* flush if we were reading */
|
|
if (wh->dma_dir) {
|
|
regs->FLUSH = 1;
|
|
mb(); /* don't allow prefetch */
|
|
while (!(regs->ISTR & ISTR_FE_FLG))
|
|
barrier();
|
|
mb(); /* no IO until FLUSH is done */
|
|
}
|
|
|
|
/* clear a possible interrupt */
|
|
/* I think that this CINT is only necessary if you are
|
|
* using the terminal count features. HM 7 Mar 1994
|
|
*/
|
|
regs->CINT = 1;
|
|
|
|
/* stop DMA */
|
|
regs->SP_DMA = 1;
|
|
mb(); /* make sure DMA is stopped before next IO */
|
|
|
|
/* restore the CONTROL bits (minus the direction flag) */
|
|
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
|
|
mb(); /* make sure CNTR is updated before next IO */
|
|
|
|
/* copy from a bounce buffer, if necessary */
|
|
if (status && wh->dma_bounce_buffer) {
|
|
if (SCpnt) {
|
|
if (wh->dma_dir && SCpnt)
|
|
memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
|
|
SCpnt->SCp.this_residual);
|
|
kfree(wh->dma_bounce_buffer);
|
|
wh->dma_bounce_buffer = NULL;
|
|
wh->dma_bounce_len = 0;
|
|
} else {
|
|
kfree(wh->dma_bounce_buffer);
|
|
wh->dma_bounce_buffer = NULL;
|
|
wh->dma_bounce_len = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int a3000_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
struct Scsi_Host *instance = cmd->device->host;
|
|
|
|
/* FIXME perform bus-specific reset */
|
|
|
|
/* FIXME 2: kill this entire function, which should
|
|
cause mid-layer to call wd33c93_host_reset anyway? */
|
|
|
|
spin_lock_irq(instance->host_lock);
|
|
wd33c93_host_reset(cmd);
|
|
spin_unlock_irq(instance->host_lock);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
static struct scsi_host_template amiga_a3000_scsi_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "Amiga 3000 built-in SCSI",
|
|
.show_info = wd33c93_show_info,
|
|
.write_info = wd33c93_write_info,
|
|
.proc_name = "A3000",
|
|
.queuecommand = wd33c93_queuecommand,
|
|
.eh_abort_handler = wd33c93_abort,
|
|
.eh_bus_reset_handler = a3000_bus_reset,
|
|
.eh_host_reset_handler = wd33c93_host_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.use_clustering = ENABLE_CLUSTERING
|
|
};
|
|
|
|
static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct Scsi_Host *instance;
|
|
int error;
|
|
struct a3000_scsiregs *regs;
|
|
wd33c93_regs wdregs;
|
|
struct a3000_hostdata *hdata;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
|
|
return -EBUSY;
|
|
|
|
instance = scsi_host_alloc(&amiga_a3000_scsi_template,
|
|
sizeof(struct a3000_hostdata));
|
|
if (!instance) {
|
|
error = -ENOMEM;
|
|
goto fail_alloc;
|
|
}
|
|
|
|
instance->irq = IRQ_AMIGA_PORTS;
|
|
|
|
regs = ZTWO_VADDR(res->start);
|
|
regs->DAWR = DAWR_A3000;
|
|
|
|
wdregs.SASR = ®s->SASR;
|
|
wdregs.SCMD = ®s->SCMD;
|
|
|
|
hdata = shost_priv(instance);
|
|
hdata->wh.no_sync = 0xff;
|
|
hdata->wh.fast = 0;
|
|
hdata->wh.dma_mode = CTRL_DMA;
|
|
hdata->regs = regs;
|
|
|
|
wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
|
|
error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
|
|
"A3000 SCSI", instance);
|
|
if (error)
|
|
goto fail_irq;
|
|
|
|
regs->CNTR = CNTR_PDMD | CNTR_INTEN;
|
|
|
|
error = scsi_add_host(instance, NULL);
|
|
if (error)
|
|
goto fail_host;
|
|
|
|
platform_set_drvdata(pdev, instance);
|
|
|
|
scsi_scan_host(instance);
|
|
return 0;
|
|
|
|
fail_host:
|
|
free_irq(IRQ_AMIGA_PORTS, instance);
|
|
fail_irq:
|
|
scsi_host_put(instance);
|
|
fail_alloc:
|
|
release_mem_region(res->start, resource_size(res));
|
|
return error;
|
|
}
|
|
|
|
static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
|
|
{
|
|
struct Scsi_Host *instance = platform_get_drvdata(pdev);
|
|
struct a3000_hostdata *hdata = shost_priv(instance);
|
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
hdata->regs->CNTR = 0;
|
|
scsi_remove_host(instance);
|
|
free_irq(IRQ_AMIGA_PORTS, instance);
|
|
scsi_host_put(instance);
|
|
release_mem_region(res->start, resource_size(res));
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver amiga_a3000_scsi_driver = {
|
|
.remove = __exit_p(amiga_a3000_scsi_remove),
|
|
.driver = {
|
|
.name = "amiga-a3000-scsi",
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(amiga_a3000_scsi_driver, amiga_a3000_scsi_probe);
|
|
|
|
MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:amiga-a3000-scsi");
|