mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
f3ae7d9155
The enum xdma_ip_type is only used inside the Xilinx DMA driver and not exported to any consumers (nor should it be). So move it from the global header to driver file itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2708 lines
73 KiB
C
2708 lines
73 KiB
C
/*
|
|
* DMA driver for Xilinx Video DMA Engine
|
|
*
|
|
* Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
|
|
*
|
|
* Based on the Freescale DMA driver.
|
|
*
|
|
* Description:
|
|
* The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
|
|
* core that provides high-bandwidth direct memory access between memory
|
|
* and AXI4-Stream type video target peripherals. The core provides efficient
|
|
* two dimensional DMA operations with independent asynchronous read (S2MM)
|
|
* and write (MM2S) channel operation. It can be configured to have either
|
|
* one channel or two channels. If configured as two channels, one is to
|
|
* transmit to the video device (MM2S) and another is to receive from the
|
|
* video device (S2MM). Initialization, status, interrupt and management
|
|
* registers are accessed through an AXI4-Lite slave interface.
|
|
*
|
|
* The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
|
|
* provides high-bandwidth one dimensional direct memory access between memory
|
|
* and AXI4-Stream target peripherals. It supports one receive and one
|
|
* transmit channel, both of them optional at synthesis time.
|
|
*
|
|
* The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
|
|
* Access (DMA) between a memory-mapped source address and a memory-mapped
|
|
* destination address.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/dma/xilinx_dma.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_dma.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
|
|
#include "../dmaengine.h"
|
|
|
|
/* Register/Descriptor Offsets */
|
|
#define XILINX_DMA_MM2S_CTRL_OFFSET 0x0000
|
|
#define XILINX_DMA_S2MM_CTRL_OFFSET 0x0030
|
|
#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050
|
|
#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0
|
|
|
|
/* Control Registers */
|
|
#define XILINX_DMA_REG_DMACR 0x0000
|
|
#define XILINX_DMA_DMACR_DELAY_MAX 0xff
|
|
#define XILINX_DMA_DMACR_DELAY_SHIFT 24
|
|
#define XILINX_DMA_DMACR_FRAME_COUNT_MAX 0xff
|
|
#define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT 16
|
|
#define XILINX_DMA_DMACR_ERR_IRQ BIT(14)
|
|
#define XILINX_DMA_DMACR_DLY_CNT_IRQ BIT(13)
|
|
#define XILINX_DMA_DMACR_FRM_CNT_IRQ BIT(12)
|
|
#define XILINX_DMA_DMACR_MASTER_SHIFT 8
|
|
#define XILINX_DMA_DMACR_FSYNCSRC_SHIFT 5
|
|
#define XILINX_DMA_DMACR_FRAMECNT_EN BIT(4)
|
|
#define XILINX_DMA_DMACR_GENLOCK_EN BIT(3)
|
|
#define XILINX_DMA_DMACR_RESET BIT(2)
|
|
#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
|
|
#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
|
|
#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
|
|
|
|
#define XILINX_DMA_REG_DMASR 0x0004
|
|
#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
|
|
#define XILINX_DMA_DMASR_ERR_IRQ BIT(14)
|
|
#define XILINX_DMA_DMASR_DLY_CNT_IRQ BIT(13)
|
|
#define XILINX_DMA_DMASR_FRM_CNT_IRQ BIT(12)
|
|
#define XILINX_DMA_DMASR_SOF_LATE_ERR BIT(11)
|
|
#define XILINX_DMA_DMASR_SG_DEC_ERR BIT(10)
|
|
#define XILINX_DMA_DMASR_SG_SLV_ERR BIT(9)
|
|
#define XILINX_DMA_DMASR_EOF_EARLY_ERR BIT(8)
|
|
#define XILINX_DMA_DMASR_SOF_EARLY_ERR BIT(7)
|
|
#define XILINX_DMA_DMASR_DMA_DEC_ERR BIT(6)
|
|
#define XILINX_DMA_DMASR_DMA_SLAVE_ERR BIT(5)
|
|
#define XILINX_DMA_DMASR_DMA_INT_ERR BIT(4)
|
|
#define XILINX_DMA_DMASR_IDLE BIT(1)
|
|
#define XILINX_DMA_DMASR_HALTED BIT(0)
|
|
#define XILINX_DMA_DMASR_DELAY_MASK GENMASK(31, 24)
|
|
#define XILINX_DMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16)
|
|
|
|
#define XILINX_DMA_REG_CURDESC 0x0008
|
|
#define XILINX_DMA_REG_TAILDESC 0x0010
|
|
#define XILINX_DMA_REG_REG_INDEX 0x0014
|
|
#define XILINX_DMA_REG_FRMSTORE 0x0018
|
|
#define XILINX_DMA_REG_THRESHOLD 0x001c
|
|
#define XILINX_DMA_REG_FRMPTR_STS 0x0024
|
|
#define XILINX_DMA_REG_PARK_PTR 0x0028
|
|
#define XILINX_DMA_PARK_PTR_WR_REF_SHIFT 8
|
|
#define XILINX_DMA_PARK_PTR_RD_REF_SHIFT 0
|
|
#define XILINX_DMA_REG_VDMA_VERSION 0x002c
|
|
|
|
/* Register Direct Mode Registers */
|
|
#define XILINX_DMA_REG_VSIZE 0x0000
|
|
#define XILINX_DMA_REG_HSIZE 0x0004
|
|
|
|
#define XILINX_DMA_REG_FRMDLY_STRIDE 0x0008
|
|
#define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24
|
|
#define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT 0
|
|
|
|
#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n))
|
|
#define XILINX_VDMA_REG_START_ADDRESS_64(n) (0x000c + 8 * (n))
|
|
|
|
/* HW specific definitions */
|
|
#define XILINX_DMA_MAX_CHANS_PER_DEVICE 0x20
|
|
|
|
#define XILINX_DMA_DMAXR_ALL_IRQ_MASK \
|
|
(XILINX_DMA_DMASR_FRM_CNT_IRQ | \
|
|
XILINX_DMA_DMASR_DLY_CNT_IRQ | \
|
|
XILINX_DMA_DMASR_ERR_IRQ)
|
|
|
|
#define XILINX_DMA_DMASR_ALL_ERR_MASK \
|
|
(XILINX_DMA_DMASR_EOL_LATE_ERR | \
|
|
XILINX_DMA_DMASR_SOF_LATE_ERR | \
|
|
XILINX_DMA_DMASR_SG_DEC_ERR | \
|
|
XILINX_DMA_DMASR_SG_SLV_ERR | \
|
|
XILINX_DMA_DMASR_EOF_EARLY_ERR | \
|
|
XILINX_DMA_DMASR_SOF_EARLY_ERR | \
|
|
XILINX_DMA_DMASR_DMA_DEC_ERR | \
|
|
XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
|
|
XILINX_DMA_DMASR_DMA_INT_ERR)
|
|
|
|
/*
|
|
* Recoverable errors are DMA Internal error, SOF Early, EOF Early
|
|
* and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
|
|
* is enabled in the h/w system.
|
|
*/
|
|
#define XILINX_DMA_DMASR_ERR_RECOVER_MASK \
|
|
(XILINX_DMA_DMASR_SOF_LATE_ERR | \
|
|
XILINX_DMA_DMASR_EOF_EARLY_ERR | \
|
|
XILINX_DMA_DMASR_SOF_EARLY_ERR | \
|
|
XILINX_DMA_DMASR_DMA_INT_ERR)
|
|
|
|
/* Axi VDMA Flush on Fsync bits */
|
|
#define XILINX_DMA_FLUSH_S2MM 3
|
|
#define XILINX_DMA_FLUSH_MM2S 2
|
|
#define XILINX_DMA_FLUSH_BOTH 1
|
|
|
|
/* Delay loop counter to prevent hardware failure */
|
|
#define XILINX_DMA_LOOP_COUNT 1000000
|
|
|
|
/* AXI DMA Specific Registers/Offsets */
|
|
#define XILINX_DMA_REG_SRCDSTADDR 0x18
|
|
#define XILINX_DMA_REG_BTT 0x28
|
|
|
|
/* AXI DMA Specific Masks/Bit fields */
|
|
#define XILINX_DMA_MAX_TRANS_LEN GENMASK(22, 0)
|
|
#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
|
|
#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
|
|
#define XILINX_DMA_CR_COALESCE_SHIFT 16
|
|
#define XILINX_DMA_BD_SOP BIT(27)
|
|
#define XILINX_DMA_BD_EOP BIT(26)
|
|
#define XILINX_DMA_COALESCE_MAX 255
|
|
#define XILINX_DMA_NUM_APP_WORDS 5
|
|
|
|
/* Multi-Channel DMA Descriptor offsets*/
|
|
#define XILINX_DMA_MCRX_CDESC(x) (0x40 + (x-1) * 0x20)
|
|
#define XILINX_DMA_MCRX_TDESC(x) (0x48 + (x-1) * 0x20)
|
|
|
|
/* Multi-Channel DMA Masks/Shifts */
|
|
#define XILINX_DMA_BD_HSIZE_MASK GENMASK(15, 0)
|
|
#define XILINX_DMA_BD_STRIDE_MASK GENMASK(15, 0)
|
|
#define XILINX_DMA_BD_VSIZE_MASK GENMASK(31, 19)
|
|
#define XILINX_DMA_BD_TDEST_MASK GENMASK(4, 0)
|
|
#define XILINX_DMA_BD_STRIDE_SHIFT 0
|
|
#define XILINX_DMA_BD_VSIZE_SHIFT 19
|
|
|
|
/* AXI CDMA Specific Registers/Offsets */
|
|
#define XILINX_CDMA_REG_SRCADDR 0x18
|
|
#define XILINX_CDMA_REG_DSTADDR 0x20
|
|
|
|
/* AXI CDMA Specific Masks */
|
|
#define XILINX_CDMA_CR_SGMODE BIT(3)
|
|
|
|
/**
|
|
* struct xilinx_vdma_desc_hw - Hardware Descriptor
|
|
* @next_desc: Next Descriptor Pointer @0x00
|
|
* @pad1: Reserved @0x04
|
|
* @buf_addr: Buffer address @0x08
|
|
* @buf_addr_msb: MSB of Buffer address @0x0C
|
|
* @vsize: Vertical Size @0x10
|
|
* @hsize: Horizontal Size @0x14
|
|
* @stride: Number of bytes between the first
|
|
* pixels of each horizontal line @0x18
|
|
*/
|
|
struct xilinx_vdma_desc_hw {
|
|
u32 next_desc;
|
|
u32 pad1;
|
|
u32 buf_addr;
|
|
u32 buf_addr_msb;
|
|
u32 vsize;
|
|
u32 hsize;
|
|
u32 stride;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
|
|
* @next_desc: Next Descriptor Pointer @0x00
|
|
* @next_desc_msb: MSB of Next Descriptor Pointer @0x04
|
|
* @buf_addr: Buffer address @0x08
|
|
* @buf_addr_msb: MSB of Buffer address @0x0C
|
|
* @pad1: Reserved @0x10
|
|
* @pad2: Reserved @0x14
|
|
* @control: Control field @0x18
|
|
* @status: Status field @0x1C
|
|
* @app: APP Fields @0x20 - 0x30
|
|
*/
|
|
struct xilinx_axidma_desc_hw {
|
|
u32 next_desc;
|
|
u32 next_desc_msb;
|
|
u32 buf_addr;
|
|
u32 buf_addr_msb;
|
|
u32 mcdma_control;
|
|
u32 vsize_stride;
|
|
u32 control;
|
|
u32 status;
|
|
u32 app[XILINX_DMA_NUM_APP_WORDS];
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_cdma_desc_hw - Hardware Descriptor
|
|
* @next_desc: Next Descriptor Pointer @0x00
|
|
* @next_descmsb: Next Descriptor Pointer MSB @0x04
|
|
* @src_addr: Source address @0x08
|
|
* @src_addrmsb: Source address MSB @0x0C
|
|
* @dest_addr: Destination address @0x10
|
|
* @dest_addrmsb: Destination address MSB @0x14
|
|
* @control: Control field @0x18
|
|
* @status: Status field @0x1C
|
|
*/
|
|
struct xilinx_cdma_desc_hw {
|
|
u32 next_desc;
|
|
u32 next_desc_msb;
|
|
u32 src_addr;
|
|
u32 src_addr_msb;
|
|
u32 dest_addr;
|
|
u32 dest_addr_msb;
|
|
u32 control;
|
|
u32 status;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_vdma_tx_segment - Descriptor segment
|
|
* @hw: Hardware descriptor
|
|
* @node: Node in the descriptor segments list
|
|
* @phys: Physical address of segment
|
|
*/
|
|
struct xilinx_vdma_tx_segment {
|
|
struct xilinx_vdma_desc_hw hw;
|
|
struct list_head node;
|
|
dma_addr_t phys;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_axidma_tx_segment - Descriptor segment
|
|
* @hw: Hardware descriptor
|
|
* @node: Node in the descriptor segments list
|
|
* @phys: Physical address of segment
|
|
*/
|
|
struct xilinx_axidma_tx_segment {
|
|
struct xilinx_axidma_desc_hw hw;
|
|
struct list_head node;
|
|
dma_addr_t phys;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_cdma_tx_segment - Descriptor segment
|
|
* @hw: Hardware descriptor
|
|
* @node: Node in the descriptor segments list
|
|
* @phys: Physical address of segment
|
|
*/
|
|
struct xilinx_cdma_tx_segment {
|
|
struct xilinx_cdma_desc_hw hw;
|
|
struct list_head node;
|
|
dma_addr_t phys;
|
|
} __aligned(64);
|
|
|
|
/**
|
|
* struct xilinx_dma_tx_descriptor - Per Transaction structure
|
|
* @async_tx: Async transaction descriptor
|
|
* @segments: TX segments list
|
|
* @node: Node in the channel descriptors list
|
|
* @cyclic: Check for cyclic transfers.
|
|
*/
|
|
struct xilinx_dma_tx_descriptor {
|
|
struct dma_async_tx_descriptor async_tx;
|
|
struct list_head segments;
|
|
struct list_head node;
|
|
bool cyclic;
|
|
};
|
|
|
|
/**
|
|
* struct xilinx_dma_chan - Driver specific DMA channel structure
|
|
* @xdev: Driver specific device structure
|
|
* @ctrl_offset: Control registers offset
|
|
* @desc_offset: TX descriptor registers offset
|
|
* @lock: Descriptor operation lock
|
|
* @pending_list: Descriptors waiting
|
|
* @active_list: Descriptors ready to submit
|
|
* @done_list: Complete descriptors
|
|
* @common: DMA common channel
|
|
* @desc_pool: Descriptors pool
|
|
* @dev: The dma device
|
|
* @irq: Channel IRQ
|
|
* @id: Channel ID
|
|
* @direction: Transfer direction
|
|
* @num_frms: Number of frames
|
|
* @has_sg: Support scatter transfers
|
|
* @cyclic: Check for cyclic transfers.
|
|
* @genlock: Support genlock mode
|
|
* @err: Channel has errors
|
|
* @tasklet: Cleanup work after irq
|
|
* @config: Device configuration info
|
|
* @flush_on_fsync: Flush on Frame sync
|
|
* @desc_pendingcount: Descriptor pending count
|
|
* @ext_addr: Indicates 64 bit addressing is supported by dma channel
|
|
* @desc_submitcount: Descriptor h/w submitted count
|
|
* @residue: Residue for AXI DMA
|
|
* @seg_v: Statically allocated segments base
|
|
* @cyclic_seg_v: Statically allocated segment base for cyclic transfers
|
|
* @start_transfer: Differentiate b/w DMA IP's transfer
|
|
* @stop_transfer: Differentiate b/w DMA IP's quiesce
|
|
*/
|
|
struct xilinx_dma_chan {
|
|
struct xilinx_dma_device *xdev;
|
|
u32 ctrl_offset;
|
|
u32 desc_offset;
|
|
spinlock_t lock;
|
|
struct list_head pending_list;
|
|
struct list_head active_list;
|
|
struct list_head done_list;
|
|
struct dma_chan common;
|
|
struct dma_pool *desc_pool;
|
|
struct device *dev;
|
|
int irq;
|
|
int id;
|
|
enum dma_transfer_direction direction;
|
|
int num_frms;
|
|
bool has_sg;
|
|
bool cyclic;
|
|
bool genlock;
|
|
bool err;
|
|
struct tasklet_struct tasklet;
|
|
struct xilinx_vdma_config config;
|
|
bool flush_on_fsync;
|
|
u32 desc_pendingcount;
|
|
bool ext_addr;
|
|
u32 desc_submitcount;
|
|
u32 residue;
|
|
struct xilinx_axidma_tx_segment *seg_v;
|
|
struct xilinx_axidma_tx_segment *cyclic_seg_v;
|
|
void (*start_transfer)(struct xilinx_dma_chan *chan);
|
|
int (*stop_transfer)(struct xilinx_dma_chan *chan);
|
|
u16 tdest;
|
|
};
|
|
|
|
/**
|
|
* enum xdma_ip_type: DMA IP type.
|
|
*
|
|
* XDMA_TYPE_AXIDMA: Axi dma ip.
|
|
* XDMA_TYPE_CDMA: Axi cdma ip.
|
|
* XDMA_TYPE_VDMA: Axi vdma ip.
|
|
*
|
|
*/
|
|
enum xdma_ip_type {
|
|
XDMA_TYPE_AXIDMA = 0,
|
|
XDMA_TYPE_CDMA,
|
|
XDMA_TYPE_VDMA,
|
|
};
|
|
|
|
struct xilinx_dma_config {
|
|
enum xdma_ip_type dmatype;
|
|
int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
|
|
struct clk **tx_clk, struct clk **txs_clk,
|
|
struct clk **rx_clk, struct clk **rxs_clk);
|
|
};
|
|
|
|
/**
|
|
* struct xilinx_dma_device - DMA device structure
|
|
* @regs: I/O mapped base address
|
|
* @dev: Device Structure
|
|
* @common: DMA device structure
|
|
* @chan: Driver specific DMA channel
|
|
* @has_sg: Specifies whether Scatter-Gather is present or not
|
|
* @mcdma: Specifies whether Multi-Channel is present or not
|
|
* @flush_on_fsync: Flush on frame sync
|
|
* @ext_addr: Indicates 64 bit addressing is supported by dma device
|
|
* @pdev: Platform device structure pointer
|
|
* @dma_config: DMA config structure
|
|
* @axi_clk: DMA Axi4-lite interace clock
|
|
* @tx_clk: DMA mm2s clock
|
|
* @txs_clk: DMA mm2s stream clock
|
|
* @rx_clk: DMA s2mm clock
|
|
* @rxs_clk: DMA s2mm stream clock
|
|
* @nr_channels: Number of channels DMA device supports
|
|
* @chan_id: DMA channel identifier
|
|
*/
|
|
struct xilinx_dma_device {
|
|
void __iomem *regs;
|
|
struct device *dev;
|
|
struct dma_device common;
|
|
struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
|
|
bool has_sg;
|
|
bool mcdma;
|
|
u32 flush_on_fsync;
|
|
bool ext_addr;
|
|
struct platform_device *pdev;
|
|
const struct xilinx_dma_config *dma_config;
|
|
struct clk *axi_clk;
|
|
struct clk *tx_clk;
|
|
struct clk *txs_clk;
|
|
struct clk *rx_clk;
|
|
struct clk *rxs_clk;
|
|
u32 nr_channels;
|
|
u32 chan_id;
|
|
};
|
|
|
|
/* Macros */
|
|
#define to_xilinx_chan(chan) \
|
|
container_of(chan, struct xilinx_dma_chan, common)
|
|
#define to_dma_tx_descriptor(tx) \
|
|
container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
|
|
#define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
|
|
readl_poll_timeout(chan->xdev->regs + chan->ctrl_offset + reg, val, \
|
|
cond, delay_us, timeout_us)
|
|
|
|
/* IO accessors */
|
|
static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
|
|
{
|
|
return ioread32(chan->xdev->regs + reg);
|
|
}
|
|
|
|
static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
|
|
{
|
|
iowrite32(value, chan->xdev->regs + reg);
|
|
}
|
|
|
|
static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
|
|
u32 value)
|
|
{
|
|
dma_write(chan, chan->desc_offset + reg, value);
|
|
}
|
|
|
|
static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
|
|
{
|
|
return dma_read(chan, chan->ctrl_offset + reg);
|
|
}
|
|
|
|
static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
|
|
u32 value)
|
|
{
|
|
dma_write(chan, chan->ctrl_offset + reg, value);
|
|
}
|
|
|
|
static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
|
|
u32 clr)
|
|
{
|
|
dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
|
|
}
|
|
|
|
static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
|
|
u32 set)
|
|
{
|
|
dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
|
|
}
|
|
|
|
/**
|
|
* vdma_desc_write_64 - 64-bit descriptor write
|
|
* @chan: Driver specific VDMA channel
|
|
* @reg: Register to write
|
|
* @value_lsb: lower address of the descriptor.
|
|
* @value_msb: upper address of the descriptor.
|
|
*
|
|
* Since vdma driver is trying to write to a register offset which is not a
|
|
* multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
|
|
* instead of a single 64 bit register write.
|
|
*/
|
|
static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
|
|
u32 value_lsb, u32 value_msb)
|
|
{
|
|
/* Write the lsb 32 bits*/
|
|
writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
|
|
|
|
/* Write the msb 32 bits */
|
|
writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
|
|
}
|
|
|
|
static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
|
|
{
|
|
lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
|
|
}
|
|
|
|
static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
|
|
dma_addr_t addr)
|
|
{
|
|
if (chan->ext_addr)
|
|
dma_writeq(chan, reg, addr);
|
|
else
|
|
dma_ctrl_write(chan, reg, addr);
|
|
}
|
|
|
|
static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
|
|
struct xilinx_axidma_desc_hw *hw,
|
|
dma_addr_t buf_addr, size_t sg_used,
|
|
size_t period_len)
|
|
{
|
|
if (chan->ext_addr) {
|
|
hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
|
|
hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
|
|
period_len);
|
|
} else {
|
|
hw->buf_addr = buf_addr + sg_used + period_len;
|
|
}
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Descriptors and segments alloc and free
|
|
*/
|
|
|
|
/**
|
|
* xilinx_vdma_alloc_tx_segment - Allocate transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: The allocated segment on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_vdma_tx_segment *
|
|
xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_tx_segment *segment;
|
|
dma_addr_t phys;
|
|
|
|
segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
|
|
if (!segment)
|
|
return NULL;
|
|
|
|
segment->phys = phys;
|
|
|
|
return segment;
|
|
}
|
|
|
|
/**
|
|
* xilinx_cdma_alloc_tx_segment - Allocate transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: The allocated segment on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_cdma_tx_segment *
|
|
xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_cdma_tx_segment *segment;
|
|
dma_addr_t phys;
|
|
|
|
segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
|
|
if (!segment)
|
|
return NULL;
|
|
|
|
segment->phys = phys;
|
|
|
|
return segment;
|
|
}
|
|
|
|
/**
|
|
* xilinx_axidma_alloc_tx_segment - Allocate transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: The allocated segment on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_axidma_tx_segment *
|
|
xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_axidma_tx_segment *segment;
|
|
dma_addr_t phys;
|
|
|
|
segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
|
|
if (!segment)
|
|
return NULL;
|
|
|
|
segment->phys = phys;
|
|
|
|
return segment;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_free_tx_segment - Free transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
* @segment: DMA transaction segment
|
|
*/
|
|
static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
|
|
struct xilinx_axidma_tx_segment *segment)
|
|
{
|
|
dma_pool_free(chan->desc_pool, segment, segment->phys);
|
|
}
|
|
|
|
/**
|
|
* xilinx_cdma_free_tx_segment - Free transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
* @segment: DMA transaction segment
|
|
*/
|
|
static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
|
|
struct xilinx_cdma_tx_segment *segment)
|
|
{
|
|
dma_pool_free(chan->desc_pool, segment, segment->phys);
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_free_tx_segment - Free transaction segment
|
|
* @chan: Driver specific DMA channel
|
|
* @segment: DMA transaction segment
|
|
*/
|
|
static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
|
|
struct xilinx_vdma_tx_segment *segment)
|
|
{
|
|
dma_pool_free(chan->desc_pool, segment, segment->phys);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_tx_descriptor - Allocate transaction descriptor
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: The allocated descriptor on success and NULL on failure.
|
|
*/
|
|
static struct xilinx_dma_tx_descriptor *
|
|
xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
|
|
desc = kzalloc(sizeof(*desc), GFP_KERNEL);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&desc->segments);
|
|
|
|
return desc;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_free_tx_descriptor - Free transaction descriptor
|
|
* @chan: Driver specific DMA channel
|
|
* @desc: DMA transaction descriptor
|
|
*/
|
|
static void
|
|
xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
|
|
struct xilinx_dma_tx_descriptor *desc)
|
|
{
|
|
struct xilinx_vdma_tx_segment *segment, *next;
|
|
struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
|
|
struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
|
|
|
|
if (!desc)
|
|
return;
|
|
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
list_for_each_entry_safe(segment, next, &desc->segments, node) {
|
|
list_del(&segment->node);
|
|
xilinx_vdma_free_tx_segment(chan, segment);
|
|
}
|
|
} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
|
|
list_for_each_entry_safe(cdma_segment, cdma_next,
|
|
&desc->segments, node) {
|
|
list_del(&cdma_segment->node);
|
|
xilinx_cdma_free_tx_segment(chan, cdma_segment);
|
|
}
|
|
} else {
|
|
list_for_each_entry_safe(axidma_segment, axidma_next,
|
|
&desc->segments, node) {
|
|
list_del(&axidma_segment->node);
|
|
xilinx_dma_free_tx_segment(chan, axidma_segment);
|
|
}
|
|
}
|
|
|
|
kfree(desc);
|
|
}
|
|
|
|
/* Required functions */
|
|
|
|
/**
|
|
* xilinx_dma_free_desc_list - Free descriptors list
|
|
* @chan: Driver specific DMA channel
|
|
* @list: List to parse and delete the descriptor
|
|
*/
|
|
static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
|
|
struct list_head *list)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *desc, *next;
|
|
|
|
list_for_each_entry_safe(desc, next, list, node) {
|
|
list_del(&desc->node);
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_free_descriptors - Free channel descriptors
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
xilinx_dma_free_desc_list(chan, &chan->pending_list);
|
|
xilinx_dma_free_desc_list(chan, &chan->done_list);
|
|
xilinx_dma_free_desc_list(chan, &chan->active_list);
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_free_chan_resources - Free channel resources
|
|
* @dchan: DMA channel
|
|
*/
|
|
static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
dev_dbg(chan->dev, "Free all channel resources.\n");
|
|
|
|
xilinx_dma_free_descriptors(chan);
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
xilinx_dma_free_tx_segment(chan, chan->cyclic_seg_v);
|
|
xilinx_dma_free_tx_segment(chan, chan->seg_v);
|
|
}
|
|
dma_pool_destroy(chan->desc_pool);
|
|
chan->desc_pool = NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_chan_handle_cyclic - Cyclic dma callback
|
|
* @chan: Driver specific dma channel
|
|
* @desc: dma transaction descriptor
|
|
* @flags: flags for spin lock
|
|
*/
|
|
static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
|
|
struct xilinx_dma_tx_descriptor *desc,
|
|
unsigned long *flags)
|
|
{
|
|
dma_async_tx_callback callback;
|
|
void *callback_param;
|
|
|
|
callback = desc->async_tx.callback;
|
|
callback_param = desc->async_tx.callback_param;
|
|
if (callback) {
|
|
spin_unlock_irqrestore(&chan->lock, *flags);
|
|
callback(callback_param);
|
|
spin_lock_irqsave(&chan->lock, *flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_chan_desc_cleanup - Clean channel descriptors
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *desc, *next;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
list_for_each_entry_safe(desc, next, &chan->done_list, node) {
|
|
struct dmaengine_desc_callback cb;
|
|
|
|
if (desc->cyclic) {
|
|
xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
|
|
break;
|
|
}
|
|
|
|
/* Remove from the list of running transactions */
|
|
list_del(&desc->node);
|
|
|
|
/* Run the link descriptor callback function */
|
|
dmaengine_desc_get_callback(&desc->async_tx, &cb);
|
|
if (dmaengine_desc_callback_valid(&cb)) {
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
dmaengine_desc_callback_invoke(&cb, NULL);
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
}
|
|
|
|
/* Run any dependencies, then free the descriptor */
|
|
dma_run_dependencies(&desc->async_tx);
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_do_tasklet - Schedule completion tasklet
|
|
* @data: Pointer to the Xilinx DMA channel structure
|
|
*/
|
|
static void xilinx_dma_do_tasklet(unsigned long data)
|
|
{
|
|
struct xilinx_dma_chan *chan = (struct xilinx_dma_chan *)data;
|
|
|
|
xilinx_dma_chan_desc_cleanup(chan);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_alloc_chan_resources - Allocate channel resources
|
|
* @dchan: DMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
|
|
/* Has this channel already been allocated? */
|
|
if (chan->desc_pool)
|
|
return 0;
|
|
|
|
/*
|
|
* We need the descriptor to be aligned to 64bytes
|
|
* for meeting Xilinx VDMA specification requirement.
|
|
*/
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
chan->desc_pool = dma_pool_create("xilinx_dma_desc_pool",
|
|
chan->dev,
|
|
sizeof(struct xilinx_axidma_tx_segment),
|
|
__alignof__(struct xilinx_axidma_tx_segment),
|
|
0);
|
|
} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
|
|
chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
|
|
chan->dev,
|
|
sizeof(struct xilinx_cdma_tx_segment),
|
|
__alignof__(struct xilinx_cdma_tx_segment),
|
|
0);
|
|
} else {
|
|
chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
|
|
chan->dev,
|
|
sizeof(struct xilinx_vdma_tx_segment),
|
|
__alignof__(struct xilinx_vdma_tx_segment),
|
|
0);
|
|
}
|
|
|
|
if (!chan->desc_pool) {
|
|
dev_err(chan->dev,
|
|
"unable to allocate channel %d descriptor pool\n",
|
|
chan->id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
/*
|
|
* For AXI DMA case after submitting a pending_list, keep
|
|
* an extra segment allocated so that the "next descriptor"
|
|
* pointer on the tail descriptor always points to a
|
|
* valid descriptor, even when paused after reaching taildesc.
|
|
* This way, it is possible to issue additional
|
|
* transfers without halting and restarting the channel.
|
|
*/
|
|
chan->seg_v = xilinx_axidma_alloc_tx_segment(chan);
|
|
|
|
/*
|
|
* For cyclic DMA mode we need to program the tail Descriptor
|
|
* register with a value which is not a part of the BD chain
|
|
* so allocating a desc segment during channel allocation for
|
|
* programming tail descriptor.
|
|
*/
|
|
chan->cyclic_seg_v = xilinx_axidma_alloc_tx_segment(chan);
|
|
}
|
|
|
|
dma_cookie_init(dchan);
|
|
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
/* For AXI DMA resetting once channel will reset the
|
|
* other channel as well so enable the interrupts here.
|
|
*/
|
|
dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
|
|
XILINX_DMA_DMAXR_ALL_IRQ_MASK);
|
|
}
|
|
|
|
if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
|
|
dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
|
|
XILINX_CDMA_CR_SGMODE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_tx_status - Get DMA transaction status
|
|
* @dchan: DMA channel
|
|
* @cookie: Transaction identifier
|
|
* @txstate: Transaction state
|
|
*
|
|
* Return: DMA transaction status
|
|
*/
|
|
static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_axidma_tx_segment *segment;
|
|
struct xilinx_axidma_desc_hw *hw;
|
|
enum dma_status ret;
|
|
unsigned long flags;
|
|
u32 residue = 0;
|
|
|
|
ret = dma_cookie_status(dchan, cookie, txstate);
|
|
if (ret == DMA_COMPLETE || !txstate)
|
|
return ret;
|
|
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
desc = list_last_entry(&chan->active_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
if (chan->has_sg) {
|
|
list_for_each_entry(segment, &desc->segments, node) {
|
|
hw = &segment->hw;
|
|
residue += (hw->control - hw->status) &
|
|
XILINX_DMA_MAX_TRANS_LEN;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
chan->residue = residue;
|
|
dma_set_residue(txstate, chan->residue);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_is_running - Check if DMA channel is running
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: '1' if running, '0' if not.
|
|
*/
|
|
static bool xilinx_dma_is_running(struct xilinx_dma_chan *chan)
|
|
{
|
|
return !(dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
|
|
XILINX_DMA_DMASR_HALTED) &&
|
|
(dma_ctrl_read(chan, XILINX_DMA_REG_DMACR) &
|
|
XILINX_DMA_DMACR_RUNSTOP);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_is_idle - Check if DMA channel is idle
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: '1' if idle, '0' if not.
|
|
*/
|
|
static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
|
|
{
|
|
return dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
|
|
XILINX_DMA_DMASR_IDLE;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_stop_transfer - Halt DMA channel
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
|
|
{
|
|
u32 val;
|
|
|
|
dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
|
|
|
|
/* Wait for the hardware to halt */
|
|
return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
|
|
val & XILINX_DMA_DMASR_HALTED, 0,
|
|
XILINX_DMA_LOOP_COUNT);
|
|
}
|
|
|
|
/**
|
|
* xilinx_cdma_stop_transfer - Wait for the current transfer to complete
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
|
|
{
|
|
u32 val;
|
|
|
|
return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
|
|
val & XILINX_DMA_DMASR_IDLE, 0,
|
|
XILINX_DMA_LOOP_COUNT);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_start - Start DMA channel
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static void xilinx_dma_start(struct xilinx_dma_chan *chan)
|
|
{
|
|
int err;
|
|
u32 val;
|
|
|
|
dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
|
|
|
|
/* Wait for the hardware to start */
|
|
err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
|
|
!(val & XILINX_DMA_DMASR_HALTED), 0,
|
|
XILINX_DMA_LOOP_COUNT);
|
|
|
|
if (err) {
|
|
dev_err(chan->dev, "Cannot start channel %p: %x\n",
|
|
chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
|
|
|
|
chan->err = true;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_start_transfer - Starts VDMA transfer
|
|
* @chan: Driver specific channel struct pointer
|
|
*/
|
|
static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_vdma_config *config = &chan->config;
|
|
struct xilinx_dma_tx_descriptor *desc, *tail_desc;
|
|
u32 reg;
|
|
struct xilinx_vdma_tx_segment *tail_segment;
|
|
|
|
/* This function was invoked with lock held */
|
|
if (chan->err)
|
|
return;
|
|
|
|
if (list_empty(&chan->pending_list))
|
|
return;
|
|
|
|
desc = list_first_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
tail_desc = list_last_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
|
|
tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
|
|
/* If it is SG mode and hardware is busy, cannot submit */
|
|
if (chan->has_sg && xilinx_dma_is_running(chan) &&
|
|
!xilinx_dma_is_idle(chan)) {
|
|
dev_dbg(chan->dev, "DMA controller still busy\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If hardware is idle, then all descriptors on the running lists are
|
|
* done, start new transfers
|
|
*/
|
|
if (chan->has_sg)
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
|
|
desc->async_tx.phys);
|
|
|
|
/* Configure the hardware using info in the config structure */
|
|
reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
|
|
|
|
if (config->frm_cnt_en)
|
|
reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
|
|
else
|
|
reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
|
|
|
|
/* Configure channel to allow number frame buffers */
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_FRMSTORE,
|
|
chan->desc_pendingcount);
|
|
|
|
/*
|
|
* With SG, start with circular mode, so that BDs can be fetched.
|
|
* In direct register mode, if not parking, enable circular mode
|
|
*/
|
|
if (chan->has_sg || !config->park)
|
|
reg |= XILINX_DMA_DMACR_CIRC_EN;
|
|
|
|
if (config->park)
|
|
reg &= ~XILINX_DMA_DMACR_CIRC_EN;
|
|
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
|
|
|
|
if (config->park && (config->park_frm >= 0) &&
|
|
(config->park_frm < chan->num_frms)) {
|
|
if (chan->direction == DMA_MEM_TO_DEV)
|
|
dma_write(chan, XILINX_DMA_REG_PARK_PTR,
|
|
config->park_frm <<
|
|
XILINX_DMA_PARK_PTR_RD_REF_SHIFT);
|
|
else
|
|
dma_write(chan, XILINX_DMA_REG_PARK_PTR,
|
|
config->park_frm <<
|
|
XILINX_DMA_PARK_PTR_WR_REF_SHIFT);
|
|
}
|
|
|
|
/* Start the hardware */
|
|
xilinx_dma_start(chan);
|
|
|
|
if (chan->err)
|
|
return;
|
|
|
|
/* Start the transfer */
|
|
if (chan->has_sg) {
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
tail_segment->phys);
|
|
} else {
|
|
struct xilinx_vdma_tx_segment *segment, *last = NULL;
|
|
int i = 0;
|
|
|
|
if (chan->desc_submitcount < chan->num_frms)
|
|
i = chan->desc_submitcount;
|
|
|
|
list_for_each_entry(segment, &desc->segments, node) {
|
|
if (chan->ext_addr)
|
|
vdma_desc_write_64(chan,
|
|
XILINX_VDMA_REG_START_ADDRESS_64(i++),
|
|
segment->hw.buf_addr,
|
|
segment->hw.buf_addr_msb);
|
|
else
|
|
vdma_desc_write(chan,
|
|
XILINX_VDMA_REG_START_ADDRESS(i++),
|
|
segment->hw.buf_addr);
|
|
|
|
last = segment;
|
|
}
|
|
|
|
if (!last)
|
|
return;
|
|
|
|
/* HW expects these parameters to be same for one transaction */
|
|
vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
|
|
vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
|
|
last->hw.stride);
|
|
vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
|
|
}
|
|
|
|
if (!chan->has_sg) {
|
|
list_del(&desc->node);
|
|
list_add_tail(&desc->node, &chan->active_list);
|
|
chan->desc_submitcount++;
|
|
chan->desc_pendingcount--;
|
|
if (chan->desc_submitcount == chan->num_frms)
|
|
chan->desc_submitcount = 0;
|
|
} else {
|
|
list_splice_tail_init(&chan->pending_list, &chan->active_list);
|
|
chan->desc_pendingcount = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_cdma_start_transfer - Starts cdma transfer
|
|
* @chan: Driver specific channel struct pointer
|
|
*/
|
|
static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
|
|
struct xilinx_cdma_tx_segment *tail_segment;
|
|
u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
|
|
|
|
if (chan->err)
|
|
return;
|
|
|
|
if (list_empty(&chan->pending_list))
|
|
return;
|
|
|
|
head_desc = list_first_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
tail_desc = list_last_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_cdma_tx_segment, node);
|
|
|
|
if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
|
|
ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
|
|
ctrl_reg |= chan->desc_pendingcount <<
|
|
XILINX_DMA_CR_COALESCE_SHIFT;
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
|
|
}
|
|
|
|
if (chan->has_sg) {
|
|
xilinx_write(chan, XILINX_DMA_REG_CURDESC,
|
|
head_desc->async_tx.phys);
|
|
|
|
/* Update tail ptr register which will start the transfer */
|
|
xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
tail_segment->phys);
|
|
} else {
|
|
/* In simple mode */
|
|
struct xilinx_cdma_tx_segment *segment;
|
|
struct xilinx_cdma_desc_hw *hw;
|
|
|
|
segment = list_first_entry(&head_desc->segments,
|
|
struct xilinx_cdma_tx_segment,
|
|
node);
|
|
|
|
hw = &segment->hw;
|
|
|
|
xilinx_write(chan, XILINX_CDMA_REG_SRCADDR, hw->src_addr);
|
|
xilinx_write(chan, XILINX_CDMA_REG_DSTADDR, hw->dest_addr);
|
|
|
|
/* Start the transfer */
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
|
|
hw->control & XILINX_DMA_MAX_TRANS_LEN);
|
|
}
|
|
|
|
list_splice_tail_init(&chan->pending_list, &chan->active_list);
|
|
chan->desc_pendingcount = 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_start_transfer - Starts DMA transfer
|
|
* @chan: Driver specific channel struct pointer
|
|
*/
|
|
static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
|
|
struct xilinx_axidma_tx_segment *tail_segment, *old_head, *new_head;
|
|
u32 reg;
|
|
|
|
if (chan->err)
|
|
return;
|
|
|
|
if (list_empty(&chan->pending_list))
|
|
return;
|
|
|
|
/* If it is SG mode and hardware is busy, cannot submit */
|
|
if (chan->has_sg && xilinx_dma_is_running(chan) &&
|
|
!xilinx_dma_is_idle(chan)) {
|
|
dev_dbg(chan->dev, "DMA controller still busy\n");
|
|
return;
|
|
}
|
|
|
|
head_desc = list_first_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
tail_desc = list_last_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_axidma_tx_segment, node);
|
|
|
|
if (chan->has_sg && !chan->xdev->mcdma) {
|
|
old_head = list_first_entry(&head_desc->segments,
|
|
struct xilinx_axidma_tx_segment, node);
|
|
new_head = chan->seg_v;
|
|
/* Copy Buffer Descriptor fields. */
|
|
new_head->hw = old_head->hw;
|
|
|
|
/* Swap and save new reserve */
|
|
list_replace_init(&old_head->node, &new_head->node);
|
|
chan->seg_v = old_head;
|
|
|
|
tail_segment->hw.next_desc = chan->seg_v->phys;
|
|
head_desc->async_tx.phys = new_head->phys;
|
|
}
|
|
|
|
reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
|
|
|
|
if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
|
|
reg &= ~XILINX_DMA_CR_COALESCE_MAX;
|
|
reg |= chan->desc_pendingcount <<
|
|
XILINX_DMA_CR_COALESCE_SHIFT;
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
|
|
}
|
|
|
|
if (chan->has_sg && !chan->xdev->mcdma)
|
|
xilinx_write(chan, XILINX_DMA_REG_CURDESC,
|
|
head_desc->async_tx.phys);
|
|
|
|
if (chan->has_sg && chan->xdev->mcdma) {
|
|
if (chan->direction == DMA_MEM_TO_DEV) {
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
|
|
head_desc->async_tx.phys);
|
|
} else {
|
|
if (!chan->tdest) {
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
|
|
head_desc->async_tx.phys);
|
|
} else {
|
|
dma_ctrl_write(chan,
|
|
XILINX_DMA_MCRX_CDESC(chan->tdest),
|
|
head_desc->async_tx.phys);
|
|
}
|
|
}
|
|
}
|
|
|
|
xilinx_dma_start(chan);
|
|
|
|
if (chan->err)
|
|
return;
|
|
|
|
/* Start the transfer */
|
|
if (chan->has_sg && !chan->xdev->mcdma) {
|
|
if (chan->cyclic)
|
|
xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
chan->cyclic_seg_v->phys);
|
|
else
|
|
xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
tail_segment->phys);
|
|
} else if (chan->has_sg && chan->xdev->mcdma) {
|
|
if (chan->direction == DMA_MEM_TO_DEV) {
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
tail_segment->phys);
|
|
} else {
|
|
if (!chan->tdest) {
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
|
|
tail_segment->phys);
|
|
} else {
|
|
dma_ctrl_write(chan,
|
|
XILINX_DMA_MCRX_TDESC(chan->tdest),
|
|
tail_segment->phys);
|
|
}
|
|
}
|
|
} else {
|
|
struct xilinx_axidma_tx_segment *segment;
|
|
struct xilinx_axidma_desc_hw *hw;
|
|
|
|
segment = list_first_entry(&head_desc->segments,
|
|
struct xilinx_axidma_tx_segment,
|
|
node);
|
|
hw = &segment->hw;
|
|
|
|
xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
|
|
|
|
/* Start the transfer */
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
|
|
hw->control & XILINX_DMA_MAX_TRANS_LEN);
|
|
}
|
|
|
|
list_splice_tail_init(&chan->pending_list, &chan->active_list);
|
|
chan->desc_pendingcount = 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_issue_pending - Issue pending transactions
|
|
* @dchan: DMA channel
|
|
*/
|
|
static void xilinx_dma_issue_pending(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
chan->start_transfer(chan);
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_complete_descriptor - Mark the active descriptor as complete
|
|
* @chan : xilinx DMA channel
|
|
*
|
|
* CONTEXT: hardirq
|
|
*/
|
|
static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *desc, *next;
|
|
|
|
/* This function was invoked with lock held */
|
|
if (list_empty(&chan->active_list))
|
|
return;
|
|
|
|
list_for_each_entry_safe(desc, next, &chan->active_list, node) {
|
|
list_del(&desc->node);
|
|
if (!desc->cyclic)
|
|
dma_cookie_complete(&desc->async_tx);
|
|
list_add_tail(&desc->node, &chan->done_list);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_reset - Reset DMA channel
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
|
|
{
|
|
int err;
|
|
u32 tmp;
|
|
|
|
dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
|
|
|
|
/* Wait for the hardware to finish reset */
|
|
err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
|
|
!(tmp & XILINX_DMA_DMACR_RESET), 0,
|
|
XILINX_DMA_LOOP_COUNT);
|
|
|
|
if (err) {
|
|
dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
|
|
dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
|
|
dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
chan->err = false;
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
|
|
* @chan: Driver specific DMA channel
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
|
|
{
|
|
int err;
|
|
|
|
/* Reset VDMA */
|
|
err = xilinx_dma_reset(chan);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Enable interrupts */
|
|
dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
|
|
XILINX_DMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_irq_handler - DMA Interrupt handler
|
|
* @irq: IRQ number
|
|
* @data: Pointer to the Xilinx DMA channel structure
|
|
*
|
|
* Return: IRQ_HANDLED/IRQ_NONE
|
|
*/
|
|
static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
|
|
{
|
|
struct xilinx_dma_chan *chan = data;
|
|
u32 status;
|
|
|
|
/* Read the status and ack the interrupts. */
|
|
status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
|
|
if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
|
|
return IRQ_NONE;
|
|
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
|
|
status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
if (status & XILINX_DMA_DMASR_ERR_IRQ) {
|
|
/*
|
|
* An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
|
|
* error is recoverable, ignore it. Otherwise flag the error.
|
|
*
|
|
* Only recoverable errors can be cleared in the DMASR register,
|
|
* make sure not to write to other error bits to 1.
|
|
*/
|
|
u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
|
|
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
|
|
errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
|
|
|
|
if (!chan->flush_on_fsync ||
|
|
(errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
|
|
dev_err(chan->dev,
|
|
"Channel %p has errors %x, cdr %x tdr %x\n",
|
|
chan, errors,
|
|
dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
|
|
dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
|
|
chan->err = true;
|
|
}
|
|
}
|
|
|
|
if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
|
|
/*
|
|
* Device takes too long to do the transfer when user requires
|
|
* responsiveness.
|
|
*/
|
|
dev_dbg(chan->dev, "Inter-packet latency too long\n");
|
|
}
|
|
|
|
if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
|
|
spin_lock(&chan->lock);
|
|
xilinx_dma_complete_descriptor(chan);
|
|
chan->start_transfer(chan);
|
|
spin_unlock(&chan->lock);
|
|
}
|
|
|
|
tasklet_schedule(&chan->tasklet);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* append_desc_queue - Queuing descriptor
|
|
* @chan: Driver specific dma channel
|
|
* @desc: dma transaction descriptor
|
|
*/
|
|
static void append_desc_queue(struct xilinx_dma_chan *chan,
|
|
struct xilinx_dma_tx_descriptor *desc)
|
|
{
|
|
struct xilinx_vdma_tx_segment *tail_segment;
|
|
struct xilinx_dma_tx_descriptor *tail_desc;
|
|
struct xilinx_axidma_tx_segment *axidma_tail_segment;
|
|
struct xilinx_cdma_tx_segment *cdma_tail_segment;
|
|
|
|
if (list_empty(&chan->pending_list))
|
|
goto append;
|
|
|
|
/*
|
|
* Add the hardware descriptor to the chain of hardware descriptors
|
|
* that already exists in memory.
|
|
*/
|
|
tail_desc = list_last_entry(&chan->pending_list,
|
|
struct xilinx_dma_tx_descriptor, node);
|
|
if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_vdma_tx_segment,
|
|
node);
|
|
tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
|
|
} else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
|
|
cdma_tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_cdma_tx_segment,
|
|
node);
|
|
cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
|
|
} else {
|
|
axidma_tail_segment = list_last_entry(&tail_desc->segments,
|
|
struct xilinx_axidma_tx_segment,
|
|
node);
|
|
axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
|
|
}
|
|
|
|
/*
|
|
* Add the software descriptor and all children to the list
|
|
* of pending transactions
|
|
*/
|
|
append:
|
|
list_add_tail(&desc->node, &chan->pending_list);
|
|
chan->desc_pendingcount++;
|
|
|
|
if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
|
|
&& unlikely(chan->desc_pendingcount > chan->num_frms)) {
|
|
dev_dbg(chan->dev, "desc pendingcount is too high\n");
|
|
chan->desc_pendingcount = chan->num_frms;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_tx_submit - Submit DMA transaction
|
|
* @tx: Async transaction descriptor
|
|
*
|
|
* Return: cookie value on success and failure value on error
|
|
*/
|
|
static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
|
|
dma_cookie_t cookie;
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
if (chan->cyclic) {
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (chan->err) {
|
|
/*
|
|
* If reset fails, need to hard reset the system.
|
|
* Channel is no longer functional
|
|
*/
|
|
err = xilinx_dma_chan_reset(chan);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
spin_lock_irqsave(&chan->lock, flags);
|
|
|
|
cookie = dma_cookie_assign(tx);
|
|
|
|
/* Put this transaction onto the tail of the pending queue */
|
|
append_desc_queue(chan, desc);
|
|
|
|
if (desc->cyclic)
|
|
chan->cyclic = true;
|
|
|
|
spin_unlock_irqrestore(&chan->lock, flags);
|
|
|
|
return cookie;
|
|
}
|
|
|
|
/**
|
|
* xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
|
|
* DMA_SLAVE transaction
|
|
* @dchan: DMA channel
|
|
* @xt: Interleaved template pointer
|
|
* @flags: transfer ack flags
|
|
*
|
|
* Return: Async transaction descriptor on success and NULL on failure
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
|
|
struct dma_interleaved_template *xt,
|
|
unsigned long flags)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_vdma_tx_segment *segment, *prev = NULL;
|
|
struct xilinx_vdma_desc_hw *hw;
|
|
|
|
if (!is_slave_direction(xt->dir))
|
|
return NULL;
|
|
|
|
if (!xt->numf || !xt->sgl[0].size)
|
|
return NULL;
|
|
|
|
if (xt->frame_size != 1)
|
|
return NULL;
|
|
|
|
/* Allocate a transaction descriptor. */
|
|
desc = xilinx_dma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_dma_tx_submit;
|
|
async_tx_ack(&desc->async_tx);
|
|
|
|
/* Allocate the link descriptor from DMA pool */
|
|
segment = xilinx_vdma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
/* Fill in the hardware descriptor */
|
|
hw = &segment->hw;
|
|
hw->vsize = xt->numf;
|
|
hw->hsize = xt->sgl[0].size;
|
|
hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
|
|
XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
|
|
hw->stride |= chan->config.frm_dly <<
|
|
XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
|
|
|
|
if (xt->dir != DMA_MEM_TO_DEV) {
|
|
if (chan->ext_addr) {
|
|
hw->buf_addr = lower_32_bits(xt->dst_start);
|
|
hw->buf_addr_msb = upper_32_bits(xt->dst_start);
|
|
} else {
|
|
hw->buf_addr = xt->dst_start;
|
|
}
|
|
} else {
|
|
if (chan->ext_addr) {
|
|
hw->buf_addr = lower_32_bits(xt->src_start);
|
|
hw->buf_addr_msb = upper_32_bits(xt->src_start);
|
|
} else {
|
|
hw->buf_addr = xt->src_start;
|
|
}
|
|
}
|
|
|
|
/* Insert the segment into the descriptor segments list. */
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
|
|
prev = segment;
|
|
|
|
/* Link the last hardware descriptor with the first. */
|
|
segment = list_first_entry(&desc->segments,
|
|
struct xilinx_vdma_tx_segment, node);
|
|
desc->async_tx.phys = segment->phys;
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
|
|
* @dchan: DMA channel
|
|
* @dma_dst: destination address
|
|
* @dma_src: source address
|
|
* @len: transfer length
|
|
* @flags: transfer ack flags
|
|
*
|
|
* Return: Async transaction descriptor on success and NULL on failure
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
|
|
dma_addr_t dma_src, size_t len, unsigned long flags)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_cdma_tx_segment *segment;
|
|
struct xilinx_cdma_desc_hw *hw;
|
|
|
|
if (!len || len > XILINX_DMA_MAX_TRANS_LEN)
|
|
return NULL;
|
|
|
|
desc = xilinx_dma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_dma_tx_submit;
|
|
|
|
/* Allocate the link descriptor from DMA pool */
|
|
segment = xilinx_cdma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
hw = &segment->hw;
|
|
hw->control = len;
|
|
hw->src_addr = dma_src;
|
|
hw->dest_addr = dma_dst;
|
|
if (chan->ext_addr) {
|
|
hw->src_addr_msb = upper_32_bits(dma_src);
|
|
hw->dest_addr_msb = upper_32_bits(dma_dst);
|
|
}
|
|
|
|
/* Insert the segment into the descriptor segments list. */
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
|
|
desc->async_tx.phys = segment->phys;
|
|
hw->next_desc = segment->phys;
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
|
|
* @dchan: DMA channel
|
|
* @sgl: scatterlist to transfer to/from
|
|
* @sg_len: number of entries in @scatterlist
|
|
* @direction: DMA direction
|
|
* @flags: transfer ack flags
|
|
* @context: APP words of the descriptor
|
|
*
|
|
* Return: Async transaction descriptor on success and NULL on failure
|
|
*/
|
|
static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
|
|
struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
|
|
enum dma_transfer_direction direction, unsigned long flags,
|
|
void *context)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_axidma_tx_segment *segment = NULL, *prev = NULL;
|
|
u32 *app_w = (u32 *)context;
|
|
struct scatterlist *sg;
|
|
size_t copy;
|
|
size_t sg_used;
|
|
unsigned int i;
|
|
|
|
if (!is_slave_direction(direction))
|
|
return NULL;
|
|
|
|
/* Allocate a transaction descriptor. */
|
|
desc = xilinx_dma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_dma_tx_submit;
|
|
|
|
/* Build transactions using information in the scatter gather list */
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
sg_used = 0;
|
|
|
|
/* Loop until the entire scatterlist entry is used */
|
|
while (sg_used < sg_dma_len(sg)) {
|
|
struct xilinx_axidma_desc_hw *hw;
|
|
|
|
/* Get a free segment */
|
|
segment = xilinx_axidma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
/*
|
|
* Calculate the maximum number of bytes to transfer,
|
|
* making sure it is less than the hw limit
|
|
*/
|
|
copy = min_t(size_t, sg_dma_len(sg) - sg_used,
|
|
XILINX_DMA_MAX_TRANS_LEN);
|
|
hw = &segment->hw;
|
|
|
|
/* Fill in the descriptor */
|
|
xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
|
|
sg_used, 0);
|
|
|
|
hw->control = copy;
|
|
|
|
if (chan->direction == DMA_MEM_TO_DEV) {
|
|
if (app_w)
|
|
memcpy(hw->app, app_w, sizeof(u32) *
|
|
XILINX_DMA_NUM_APP_WORDS);
|
|
}
|
|
|
|
if (prev)
|
|
prev->hw.next_desc = segment->phys;
|
|
|
|
prev = segment;
|
|
sg_used += copy;
|
|
|
|
/*
|
|
* Insert the segment into the descriptor segments
|
|
* list.
|
|
*/
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
}
|
|
}
|
|
|
|
segment = list_first_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment, node);
|
|
desc->async_tx.phys = segment->phys;
|
|
prev->hw.next_desc = segment->phys;
|
|
|
|
/* For the last DMA_MEM_TO_DEV transfer, set EOP */
|
|
if (chan->direction == DMA_MEM_TO_DEV) {
|
|
segment->hw.control |= XILINX_DMA_BD_SOP;
|
|
segment = list_last_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment,
|
|
node);
|
|
segment->hw.control |= XILINX_DMA_BD_EOP;
|
|
}
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
|
|
* @chan: DMA channel
|
|
* @sgl: scatterlist to transfer to/from
|
|
* @sg_len: number of entries in @scatterlist
|
|
* @direction: DMA direction
|
|
* @flags: transfer ack flags
|
|
*/
|
|
static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
|
|
struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
|
|
size_t copy, sg_used;
|
|
unsigned int num_periods;
|
|
int i;
|
|
u32 reg;
|
|
|
|
if (!period_len)
|
|
return NULL;
|
|
|
|
num_periods = buf_len / period_len;
|
|
|
|
if (!num_periods)
|
|
return NULL;
|
|
|
|
if (!is_slave_direction(direction))
|
|
return NULL;
|
|
|
|
/* Allocate a transaction descriptor. */
|
|
desc = xilinx_dma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
chan->direction = direction;
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_dma_tx_submit;
|
|
|
|
for (i = 0; i < num_periods; ++i) {
|
|
sg_used = 0;
|
|
|
|
while (sg_used < period_len) {
|
|
struct xilinx_axidma_desc_hw *hw;
|
|
|
|
/* Get a free segment */
|
|
segment = xilinx_axidma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
/*
|
|
* Calculate the maximum number of bytes to transfer,
|
|
* making sure it is less than the hw limit
|
|
*/
|
|
copy = min_t(size_t, period_len - sg_used,
|
|
XILINX_DMA_MAX_TRANS_LEN);
|
|
hw = &segment->hw;
|
|
xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
|
|
period_len * i);
|
|
hw->control = copy;
|
|
|
|
if (prev)
|
|
prev->hw.next_desc = segment->phys;
|
|
|
|
prev = segment;
|
|
sg_used += copy;
|
|
|
|
/*
|
|
* Insert the segment into the descriptor segments
|
|
* list.
|
|
*/
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
}
|
|
}
|
|
|
|
head_segment = list_first_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment, node);
|
|
desc->async_tx.phys = head_segment->phys;
|
|
|
|
desc->cyclic = true;
|
|
reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
|
|
reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
|
|
|
|
segment = list_last_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment,
|
|
node);
|
|
segment->hw.next_desc = (u32) head_segment->phys;
|
|
|
|
/* For the last DMA_MEM_TO_DEV transfer, set EOP */
|
|
if (direction == DMA_MEM_TO_DEV) {
|
|
head_segment->hw.control |= XILINX_DMA_BD_SOP;
|
|
segment->hw.control |= XILINX_DMA_BD_EOP;
|
|
}
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_prep_interleaved - prepare a descriptor for a
|
|
* DMA_SLAVE transaction
|
|
* @dchan: DMA channel
|
|
* @xt: Interleaved template pointer
|
|
* @flags: transfer ack flags
|
|
*
|
|
* Return: Async transaction descriptor on success and NULL on failure
|
|
*/
|
|
static struct dma_async_tx_descriptor *
|
|
xilinx_dma_prep_interleaved(struct dma_chan *dchan,
|
|
struct dma_interleaved_template *xt,
|
|
unsigned long flags)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
struct xilinx_dma_tx_descriptor *desc;
|
|
struct xilinx_axidma_tx_segment *segment;
|
|
struct xilinx_axidma_desc_hw *hw;
|
|
|
|
if (!is_slave_direction(xt->dir))
|
|
return NULL;
|
|
|
|
if (!xt->numf || !xt->sgl[0].size)
|
|
return NULL;
|
|
|
|
if (xt->frame_size != 1)
|
|
return NULL;
|
|
|
|
/* Allocate a transaction descriptor. */
|
|
desc = xilinx_dma_alloc_tx_descriptor(chan);
|
|
if (!desc)
|
|
return NULL;
|
|
|
|
chan->direction = xt->dir;
|
|
dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
|
|
desc->async_tx.tx_submit = xilinx_dma_tx_submit;
|
|
|
|
/* Get a free segment */
|
|
segment = xilinx_axidma_alloc_tx_segment(chan);
|
|
if (!segment)
|
|
goto error;
|
|
|
|
hw = &segment->hw;
|
|
|
|
/* Fill in the descriptor */
|
|
if (xt->dir != DMA_MEM_TO_DEV)
|
|
hw->buf_addr = xt->dst_start;
|
|
else
|
|
hw->buf_addr = xt->src_start;
|
|
|
|
hw->mcdma_control = chan->tdest & XILINX_DMA_BD_TDEST_MASK;
|
|
hw->vsize_stride = (xt->numf << XILINX_DMA_BD_VSIZE_SHIFT) &
|
|
XILINX_DMA_BD_VSIZE_MASK;
|
|
hw->vsize_stride |= (xt->sgl[0].icg + xt->sgl[0].size) &
|
|
XILINX_DMA_BD_STRIDE_MASK;
|
|
hw->control = xt->sgl[0].size & XILINX_DMA_BD_HSIZE_MASK;
|
|
|
|
/*
|
|
* Insert the segment into the descriptor segments
|
|
* list.
|
|
*/
|
|
list_add_tail(&segment->node, &desc->segments);
|
|
|
|
|
|
segment = list_first_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment, node);
|
|
desc->async_tx.phys = segment->phys;
|
|
|
|
/* For the last DMA_MEM_TO_DEV transfer, set EOP */
|
|
if (xt->dir == DMA_MEM_TO_DEV) {
|
|
segment->hw.control |= XILINX_DMA_BD_SOP;
|
|
segment = list_last_entry(&desc->segments,
|
|
struct xilinx_axidma_tx_segment,
|
|
node);
|
|
segment->hw.control |= XILINX_DMA_BD_EOP;
|
|
}
|
|
|
|
return &desc->async_tx;
|
|
|
|
error:
|
|
xilinx_dma_free_tx_descriptor(chan, desc);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_terminate_all - Halt the channel and free descriptors
|
|
* @chan: Driver specific DMA Channel pointer
|
|
*/
|
|
static int xilinx_dma_terminate_all(struct dma_chan *dchan)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
u32 reg;
|
|
int err;
|
|
|
|
if (chan->cyclic)
|
|
xilinx_dma_chan_reset(chan);
|
|
|
|
err = chan->stop_transfer(chan);
|
|
if (err) {
|
|
dev_err(chan->dev, "Cannot stop channel %p: %x\n",
|
|
chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
|
|
chan->err = true;
|
|
}
|
|
|
|
/* Remove and free all of the descriptors in the lists */
|
|
xilinx_dma_free_descriptors(chan);
|
|
|
|
if (chan->cyclic) {
|
|
reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
|
|
reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
|
|
chan->cyclic = false;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_channel_set_config - Configure VDMA channel
|
|
* Run-time configuration for Axi VDMA, supports:
|
|
* . halt the channel
|
|
* . configure interrupt coalescing and inter-packet delay threshold
|
|
* . start/stop parking
|
|
* . enable genlock
|
|
*
|
|
* @dchan: DMA channel
|
|
* @cfg: VDMA device configuration pointer
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
|
|
struct xilinx_vdma_config *cfg)
|
|
{
|
|
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
|
|
u32 dmacr;
|
|
|
|
if (cfg->reset)
|
|
return xilinx_dma_chan_reset(chan);
|
|
|
|
dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
|
|
|
|
chan->config.frm_dly = cfg->frm_dly;
|
|
chan->config.park = cfg->park;
|
|
|
|
/* genlock settings */
|
|
chan->config.gen_lock = cfg->gen_lock;
|
|
chan->config.master = cfg->master;
|
|
|
|
if (cfg->gen_lock && chan->genlock) {
|
|
dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
|
|
dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
|
|
}
|
|
|
|
chan->config.frm_cnt_en = cfg->frm_cnt_en;
|
|
if (cfg->park)
|
|
chan->config.park_frm = cfg->park_frm;
|
|
else
|
|
chan->config.park_frm = -1;
|
|
|
|
chan->config.coalesc = cfg->coalesc;
|
|
chan->config.delay = cfg->delay;
|
|
|
|
if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
|
|
dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
|
|
chan->config.coalesc = cfg->coalesc;
|
|
}
|
|
|
|
if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
|
|
dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
|
|
chan->config.delay = cfg->delay;
|
|
}
|
|
|
|
/* FSync Source selection */
|
|
dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
|
|
dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
|
|
|
|
dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Probe and remove
|
|
*/
|
|
|
|
/**
|
|
* xilinx_dma_chan_remove - Per Channel remove function
|
|
* @chan: Driver specific DMA channel
|
|
*/
|
|
static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
|
|
{
|
|
/* Disable all interrupts */
|
|
dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
|
|
XILINX_DMA_DMAXR_ALL_IRQ_MASK);
|
|
|
|
if (chan->irq > 0)
|
|
free_irq(chan->irq, chan);
|
|
|
|
tasklet_kill(&chan->tasklet);
|
|
|
|
list_del(&chan->common.device_node);
|
|
}
|
|
|
|
static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
|
|
struct clk **tx_clk, struct clk **rx_clk,
|
|
struct clk **sg_clk, struct clk **tmp_clk)
|
|
{
|
|
int err;
|
|
|
|
*tmp_clk = NULL;
|
|
|
|
*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
|
|
if (IS_ERR(*axi_clk)) {
|
|
err = PTR_ERR(*axi_clk);
|
|
dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
|
|
if (IS_ERR(*tx_clk))
|
|
*tx_clk = NULL;
|
|
|
|
*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
|
|
if (IS_ERR(*rx_clk))
|
|
*rx_clk = NULL;
|
|
|
|
*sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
|
|
if (IS_ERR(*sg_clk))
|
|
*sg_clk = NULL;
|
|
|
|
err = clk_prepare_enable(*axi_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(*tx_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
|
|
goto err_disable_axiclk;
|
|
}
|
|
|
|
err = clk_prepare_enable(*rx_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
|
|
goto err_disable_txclk;
|
|
}
|
|
|
|
err = clk_prepare_enable(*sg_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
|
|
goto err_disable_rxclk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_rxclk:
|
|
clk_disable_unprepare(*rx_clk);
|
|
err_disable_txclk:
|
|
clk_disable_unprepare(*tx_clk);
|
|
err_disable_axiclk:
|
|
clk_disable_unprepare(*axi_clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
|
|
struct clk **dev_clk, struct clk **tmp_clk,
|
|
struct clk **tmp1_clk, struct clk **tmp2_clk)
|
|
{
|
|
int err;
|
|
|
|
*tmp_clk = NULL;
|
|
*tmp1_clk = NULL;
|
|
*tmp2_clk = NULL;
|
|
|
|
*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
|
|
if (IS_ERR(*axi_clk)) {
|
|
err = PTR_ERR(*axi_clk);
|
|
dev_err(&pdev->dev, "failed to get axi_clk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
*dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
|
|
if (IS_ERR(*dev_clk)) {
|
|
err = PTR_ERR(*dev_clk);
|
|
dev_err(&pdev->dev, "failed to get dev_clk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(*axi_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(*dev_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
|
|
goto err_disable_axiclk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_axiclk:
|
|
clk_disable_unprepare(*axi_clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
|
|
struct clk **tx_clk, struct clk **txs_clk,
|
|
struct clk **rx_clk, struct clk **rxs_clk)
|
|
{
|
|
int err;
|
|
|
|
*axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
|
|
if (IS_ERR(*axi_clk)) {
|
|
err = PTR_ERR(*axi_clk);
|
|
dev_err(&pdev->dev, "failed to get axi_aclk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
*tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
|
|
if (IS_ERR(*tx_clk))
|
|
*tx_clk = NULL;
|
|
|
|
*txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
|
|
if (IS_ERR(*txs_clk))
|
|
*txs_clk = NULL;
|
|
|
|
*rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
|
|
if (IS_ERR(*rx_clk))
|
|
*rx_clk = NULL;
|
|
|
|
*rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
|
|
if (IS_ERR(*rxs_clk))
|
|
*rxs_clk = NULL;
|
|
|
|
err = clk_prepare_enable(*axi_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = clk_prepare_enable(*tx_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
|
|
goto err_disable_axiclk;
|
|
}
|
|
|
|
err = clk_prepare_enable(*txs_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
|
|
goto err_disable_txclk;
|
|
}
|
|
|
|
err = clk_prepare_enable(*rx_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
|
|
goto err_disable_txsclk;
|
|
}
|
|
|
|
err = clk_prepare_enable(*rxs_clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
|
|
goto err_disable_rxclk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_rxclk:
|
|
clk_disable_unprepare(*rx_clk);
|
|
err_disable_txsclk:
|
|
clk_disable_unprepare(*txs_clk);
|
|
err_disable_txclk:
|
|
clk_disable_unprepare(*tx_clk);
|
|
err_disable_axiclk:
|
|
clk_disable_unprepare(*axi_clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
|
|
{
|
|
clk_disable_unprepare(xdev->rxs_clk);
|
|
clk_disable_unprepare(xdev->rx_clk);
|
|
clk_disable_unprepare(xdev->txs_clk);
|
|
clk_disable_unprepare(xdev->tx_clk);
|
|
clk_disable_unprepare(xdev->axi_clk);
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_chan_probe - Per Channel Probing
|
|
* It get channel features from the device tree entry and
|
|
* initialize special channel handling routines
|
|
*
|
|
* @xdev: Driver specific device structure
|
|
* @node: Device node
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
|
|
struct device_node *node, int chan_id)
|
|
{
|
|
struct xilinx_dma_chan *chan;
|
|
bool has_dre = false;
|
|
u32 value, width;
|
|
int err;
|
|
|
|
/* Allocate and initialize the channel structure */
|
|
chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
|
|
if (!chan)
|
|
return -ENOMEM;
|
|
|
|
chan->dev = xdev->dev;
|
|
chan->xdev = xdev;
|
|
chan->has_sg = xdev->has_sg;
|
|
chan->desc_pendingcount = 0x0;
|
|
chan->ext_addr = xdev->ext_addr;
|
|
|
|
spin_lock_init(&chan->lock);
|
|
INIT_LIST_HEAD(&chan->pending_list);
|
|
INIT_LIST_HEAD(&chan->done_list);
|
|
INIT_LIST_HEAD(&chan->active_list);
|
|
|
|
/* Retrieve the channel properties from the device tree */
|
|
has_dre = of_property_read_bool(node, "xlnx,include-dre");
|
|
|
|
chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
|
|
|
|
err = of_property_read_u32(node, "xlnx,datawidth", &value);
|
|
if (err) {
|
|
dev_err(xdev->dev, "missing xlnx,datawidth property\n");
|
|
return err;
|
|
}
|
|
width = value >> 3; /* Convert bits to bytes */
|
|
|
|
/* If data width is greater than 8 bytes, DRE is not in hw */
|
|
if (width > 8)
|
|
has_dre = false;
|
|
|
|
if (!has_dre)
|
|
xdev->common.copy_align = fls(width - 1);
|
|
|
|
if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
|
|
of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
|
|
of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
|
|
chan->direction = DMA_MEM_TO_DEV;
|
|
chan->id = chan_id;
|
|
chan->tdest = chan_id;
|
|
|
|
chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
|
|
|
|
if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
|
|
xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
|
|
chan->flush_on_fsync = true;
|
|
}
|
|
} else if (of_device_is_compatible(node,
|
|
"xlnx,axi-vdma-s2mm-channel") ||
|
|
of_device_is_compatible(node,
|
|
"xlnx,axi-dma-s2mm-channel")) {
|
|
chan->direction = DMA_DEV_TO_MEM;
|
|
chan->id = chan_id;
|
|
chan->tdest = chan_id - xdev->nr_channels;
|
|
|
|
chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
|
|
|
|
if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
|
|
xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
|
|
chan->flush_on_fsync = true;
|
|
}
|
|
} else {
|
|
dev_err(xdev->dev, "Invalid channel compatible node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Request the interrupt */
|
|
chan->irq = irq_of_parse_and_map(node, 0);
|
|
err = request_irq(chan->irq, xilinx_dma_irq_handler, IRQF_SHARED,
|
|
"xilinx-dma-controller", chan);
|
|
if (err) {
|
|
dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
|
|
return err;
|
|
}
|
|
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
chan->start_transfer = xilinx_dma_start_transfer;
|
|
chan->stop_transfer = xilinx_dma_stop_transfer;
|
|
} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
|
|
chan->start_transfer = xilinx_cdma_start_transfer;
|
|
chan->stop_transfer = xilinx_cdma_stop_transfer;
|
|
} else {
|
|
chan->start_transfer = xilinx_vdma_start_transfer;
|
|
chan->stop_transfer = xilinx_dma_stop_transfer;
|
|
}
|
|
|
|
/* Initialize the tasklet */
|
|
tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
|
|
(unsigned long)chan);
|
|
|
|
/*
|
|
* Initialize the DMA channel and add it to the DMA engine channels
|
|
* list.
|
|
*/
|
|
chan->common.device = &xdev->common;
|
|
|
|
list_add_tail(&chan->common.device_node, &xdev->common.channels);
|
|
xdev->chan[chan->id] = chan;
|
|
|
|
/* Reset the channel */
|
|
err = xilinx_dma_chan_reset(chan);
|
|
if (err < 0) {
|
|
dev_err(xdev->dev, "Reset channel failed\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_child_probe - Per child node probe
|
|
* It get number of dma-channels per child node from
|
|
* device-tree and initializes all the channels.
|
|
*
|
|
* @xdev: Driver specific device structure
|
|
* @node: Device node
|
|
*
|
|
* Return: 0 always.
|
|
*/
|
|
static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
|
|
struct device_node *node) {
|
|
int ret, i, nr_channels = 1;
|
|
|
|
ret = of_property_read_u32(node, "dma-channels", &nr_channels);
|
|
if ((ret < 0) && xdev->mcdma)
|
|
dev_warn(xdev->dev, "missing dma-channels property\n");
|
|
|
|
for (i = 0; i < nr_channels; i++)
|
|
xilinx_dma_chan_probe(xdev, node, xdev->chan_id++);
|
|
|
|
xdev->nr_channels += nr_channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* of_dma_xilinx_xlate - Translation function
|
|
* @dma_spec: Pointer to DMA specifier as found in the device tree
|
|
* @ofdma: Pointer to DMA controller data
|
|
*
|
|
* Return: DMA channel pointer on success and NULL on error
|
|
*/
|
|
static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct xilinx_dma_device *xdev = ofdma->of_dma_data;
|
|
int chan_id = dma_spec->args[0];
|
|
|
|
if (chan_id >= xdev->nr_channels || !xdev->chan[chan_id])
|
|
return NULL;
|
|
|
|
return dma_get_slave_channel(&xdev->chan[chan_id]->common);
|
|
}
|
|
|
|
static const struct xilinx_dma_config axidma_config = {
|
|
.dmatype = XDMA_TYPE_AXIDMA,
|
|
.clk_init = axidma_clk_init,
|
|
};
|
|
|
|
static const struct xilinx_dma_config axicdma_config = {
|
|
.dmatype = XDMA_TYPE_CDMA,
|
|
.clk_init = axicdma_clk_init,
|
|
};
|
|
|
|
static const struct xilinx_dma_config axivdma_config = {
|
|
.dmatype = XDMA_TYPE_VDMA,
|
|
.clk_init = axivdma_clk_init,
|
|
};
|
|
|
|
static const struct of_device_id xilinx_dma_of_ids[] = {
|
|
{ .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
|
|
{ .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
|
|
{ .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
|
|
|
|
/**
|
|
* xilinx_dma_probe - Driver probe function
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: '0' on success and failure value on error
|
|
*/
|
|
static int xilinx_dma_probe(struct platform_device *pdev)
|
|
{
|
|
int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
|
|
struct clk **, struct clk **, struct clk **)
|
|
= axivdma_clk_init;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct xilinx_dma_device *xdev;
|
|
struct device_node *child, *np = pdev->dev.of_node;
|
|
struct resource *io;
|
|
u32 num_frames, addr_width;
|
|
int i, err;
|
|
|
|
/* Allocate and initialize the DMA engine structure */
|
|
xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
|
|
if (!xdev)
|
|
return -ENOMEM;
|
|
|
|
xdev->dev = &pdev->dev;
|
|
if (np) {
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(xilinx_dma_of_ids, np);
|
|
if (match && match->data) {
|
|
xdev->dma_config = match->data;
|
|
clk_init = xdev->dma_config->clk_init;
|
|
}
|
|
}
|
|
|
|
err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
|
|
&xdev->rx_clk, &xdev->rxs_clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Request and map I/O memory */
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
xdev->regs = devm_ioremap_resource(&pdev->dev, io);
|
|
if (IS_ERR(xdev->regs))
|
|
return PTR_ERR(xdev->regs);
|
|
|
|
/* Retrieve the DMA engine properties from the device tree */
|
|
xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
|
|
xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
|
|
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
err = of_property_read_u32(node, "xlnx,num-fstores",
|
|
&num_frames);
|
|
if (err < 0) {
|
|
dev_err(xdev->dev,
|
|
"missing xlnx,num-fstores property\n");
|
|
return err;
|
|
}
|
|
|
|
err = of_property_read_u32(node, "xlnx,flush-fsync",
|
|
&xdev->flush_on_fsync);
|
|
if (err < 0)
|
|
dev_warn(xdev->dev,
|
|
"missing xlnx,flush-fsync property\n");
|
|
}
|
|
|
|
err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
|
|
if (err < 0)
|
|
dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
|
|
|
|
if (addr_width > 32)
|
|
xdev->ext_addr = true;
|
|
else
|
|
xdev->ext_addr = false;
|
|
|
|
/* Set the dma mask bits */
|
|
dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
|
|
|
|
/* Initialize the DMA engine */
|
|
xdev->common.dev = &pdev->dev;
|
|
|
|
INIT_LIST_HEAD(&xdev->common.channels);
|
|
if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
|
|
dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
|
|
dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
|
|
}
|
|
|
|
xdev->common.device_alloc_chan_resources =
|
|
xilinx_dma_alloc_chan_resources;
|
|
xdev->common.device_free_chan_resources =
|
|
xilinx_dma_free_chan_resources;
|
|
xdev->common.device_terminate_all = xilinx_dma_terminate_all;
|
|
xdev->common.device_tx_status = xilinx_dma_tx_status;
|
|
xdev->common.device_issue_pending = xilinx_dma_issue_pending;
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
|
|
dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
|
|
xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
|
|
xdev->common.device_prep_dma_cyclic =
|
|
xilinx_dma_prep_dma_cyclic;
|
|
xdev->common.device_prep_interleaved_dma =
|
|
xilinx_dma_prep_interleaved;
|
|
/* Residue calculation is supported by only AXI DMA */
|
|
xdev->common.residue_granularity =
|
|
DMA_RESIDUE_GRANULARITY_SEGMENT;
|
|
} else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
|
|
dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
|
|
xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
|
|
} else {
|
|
xdev->common.device_prep_interleaved_dma =
|
|
xilinx_vdma_dma_prep_interleaved;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, xdev);
|
|
|
|
/* Initialize the channels */
|
|
for_each_child_of_node(node, child) {
|
|
err = xilinx_dma_child_probe(xdev, child);
|
|
if (err < 0)
|
|
goto disable_clks;
|
|
}
|
|
|
|
if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
|
|
for (i = 0; i < xdev->nr_channels; i++)
|
|
if (xdev->chan[i])
|
|
xdev->chan[i]->num_frms = num_frames;
|
|
}
|
|
|
|
/* Register the DMA engine with the core */
|
|
dma_async_device_register(&xdev->common);
|
|
|
|
err = of_dma_controller_register(node, of_dma_xilinx_xlate,
|
|
xdev);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "Unable to register DMA to DT\n");
|
|
dma_async_device_unregister(&xdev->common);
|
|
goto error;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
|
|
|
|
return 0;
|
|
|
|
disable_clks:
|
|
xdma_disable_allclks(xdev);
|
|
error:
|
|
for (i = 0; i < xdev->nr_channels; i++)
|
|
if (xdev->chan[i])
|
|
xilinx_dma_chan_remove(xdev->chan[i]);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* xilinx_dma_remove - Driver remove function
|
|
* @pdev: Pointer to the platform_device structure
|
|
*
|
|
* Return: Always '0'
|
|
*/
|
|
static int xilinx_dma_remove(struct platform_device *pdev)
|
|
{
|
|
struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
of_dma_controller_free(pdev->dev.of_node);
|
|
|
|
dma_async_device_unregister(&xdev->common);
|
|
|
|
for (i = 0; i < xdev->nr_channels; i++)
|
|
if (xdev->chan[i])
|
|
xilinx_dma_chan_remove(xdev->chan[i]);
|
|
|
|
xdma_disable_allclks(xdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver xilinx_vdma_driver = {
|
|
.driver = {
|
|
.name = "xilinx-vdma",
|
|
.of_match_table = xilinx_dma_of_ids,
|
|
},
|
|
.probe = xilinx_dma_probe,
|
|
.remove = xilinx_dma_remove,
|
|
};
|
|
|
|
module_platform_driver(xilinx_vdma_driver);
|
|
|
|
MODULE_AUTHOR("Xilinx, Inc.");
|
|
MODULE_DESCRIPTION("Xilinx VDMA driver");
|
|
MODULE_LICENSE("GPL v2");
|