mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Geert Uytterhoeven](/assets/img/avatar_default.png)
Convert the Freescale MXS AUART driver from using the vendor-specific "fsl,uart-has-rtscts" to the generic "uart-has-rtscts" DT property, as documented by the Generic Serial DT Bindings. The old vendor-specific property is still recognized by the driver for backwards compatibility, but it is deprecated. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1792 lines
45 KiB
C
1792 lines
45 KiB
C
/*
|
||
* Application UART driver for:
|
||
* Freescale STMP37XX/STMP378X
|
||
* Alphascale ASM9260
|
||
*
|
||
* Author: dmitry pervushin <dimka@embeddedalley.com>
|
||
*
|
||
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
|
||
* Provide Alphascale ASM9260 support.
|
||
* Copyright 2008-2010 Freescale Semiconductor, Inc.
|
||
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
|
||
*
|
||
* The code contained herein is licensed under the GNU General Public
|
||
* License. You may obtain a copy of the GNU General Public License
|
||
* Version 2 or later at the following locations:
|
||
*/
|
||
|
||
#if defined(CONFIG_SERIAL_MXS_AUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
||
#define SUPPORT_SYSRQ
|
||
#endif
|
||
|
||
#include <linux/kernel.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/init.h>
|
||
#include <linux/console.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/module.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/wait.h>
|
||
#include <linux/tty.h>
|
||
#include <linux/tty_driver.h>
|
||
#include <linux/tty_flip.h>
|
||
#include <linux/serial.h>
|
||
#include <linux/serial_core.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/device.h>
|
||
#include <linux/clk.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/io.h>
|
||
#include <linux/of_device.h>
|
||
#include <linux/dma-mapping.h>
|
||
#include <linux/dmaengine.h>
|
||
|
||
#include <asm/cacheflush.h>
|
||
|
||
#include <linux/gpio.h>
|
||
#include <linux/gpio/consumer.h>
|
||
#include <linux/err.h>
|
||
#include <linux/irq.h>
|
||
#include "serial_mctrl_gpio.h"
|
||
|
||
#define MXS_AUART_PORTS 5
|
||
#define MXS_AUART_FIFO_SIZE 16
|
||
|
||
#define SET_REG 0x4
|
||
#define CLR_REG 0x8
|
||
#define TOG_REG 0xc
|
||
|
||
#define AUART_CTRL0 0x00000000
|
||
#define AUART_CTRL1 0x00000010
|
||
#define AUART_CTRL2 0x00000020
|
||
#define AUART_LINECTRL 0x00000030
|
||
#define AUART_LINECTRL2 0x00000040
|
||
#define AUART_INTR 0x00000050
|
||
#define AUART_DATA 0x00000060
|
||
#define AUART_STAT 0x00000070
|
||
#define AUART_DEBUG 0x00000080
|
||
#define AUART_VERSION 0x00000090
|
||
#define AUART_AUTOBAUD 0x000000a0
|
||
|
||
#define AUART_CTRL0_SFTRST (1 << 31)
|
||
#define AUART_CTRL0_CLKGATE (1 << 30)
|
||
#define AUART_CTRL0_RXTO_ENABLE (1 << 27)
|
||
#define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16)
|
||
#define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff)
|
||
|
||
#define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff)
|
||
|
||
#define AUART_CTRL2_DMAONERR (1 << 26)
|
||
#define AUART_CTRL2_TXDMAE (1 << 25)
|
||
#define AUART_CTRL2_RXDMAE (1 << 24)
|
||
|
||
#define AUART_CTRL2_CTSEN (1 << 15)
|
||
#define AUART_CTRL2_RTSEN (1 << 14)
|
||
#define AUART_CTRL2_RTS (1 << 11)
|
||
#define AUART_CTRL2_RXE (1 << 9)
|
||
#define AUART_CTRL2_TXE (1 << 8)
|
||
#define AUART_CTRL2_UARTEN (1 << 0)
|
||
|
||
#define AUART_LINECTRL_BAUD_DIV_MAX 0x003fffc0
|
||
#define AUART_LINECTRL_BAUD_DIV_MIN 0x000000ec
|
||
#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16
|
||
#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000
|
||
#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16)
|
||
#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8
|
||
#define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00
|
||
#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8)
|
||
#define AUART_LINECTRL_WLEN_MASK 0x00000060
|
||
#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5)
|
||
#define AUART_LINECTRL_FEN (1 << 4)
|
||
#define AUART_LINECTRL_STP2 (1 << 3)
|
||
#define AUART_LINECTRL_EPS (1 << 2)
|
||
#define AUART_LINECTRL_PEN (1 << 1)
|
||
#define AUART_LINECTRL_BRK (1 << 0)
|
||
|
||
#define AUART_INTR_RTIEN (1 << 22)
|
||
#define AUART_INTR_TXIEN (1 << 21)
|
||
#define AUART_INTR_RXIEN (1 << 20)
|
||
#define AUART_INTR_CTSMIEN (1 << 17)
|
||
#define AUART_INTR_RTIS (1 << 6)
|
||
#define AUART_INTR_TXIS (1 << 5)
|
||
#define AUART_INTR_RXIS (1 << 4)
|
||
#define AUART_INTR_CTSMIS (1 << 1)
|
||
|
||
#define AUART_STAT_BUSY (1 << 29)
|
||
#define AUART_STAT_CTS (1 << 28)
|
||
#define AUART_STAT_TXFE (1 << 27)
|
||
#define AUART_STAT_TXFF (1 << 25)
|
||
#define AUART_STAT_RXFE (1 << 24)
|
||
#define AUART_STAT_OERR (1 << 19)
|
||
#define AUART_STAT_BERR (1 << 18)
|
||
#define AUART_STAT_PERR (1 << 17)
|
||
#define AUART_STAT_FERR (1 << 16)
|
||
#define AUART_STAT_RXCOUNT_MASK 0xffff
|
||
|
||
/*
|
||
* Start of Alphascale asm9260 defines
|
||
* This list contains only differences of existing bits
|
||
* between imx2x and asm9260
|
||
*/
|
||
#define ASM9260_HW_CTRL0 0x0000
|
||
/*
|
||
* RW. Tell the UART to execute the RX DMA Command. The
|
||
* UART will clear this bit at the end of receive execution.
|
||
*/
|
||
#define ASM9260_BM_CTRL0_RXDMA_RUN BIT(28)
|
||
/* RW. 0 use FIFO for status register; 1 use DMA */
|
||
#define ASM9260_BM_CTRL0_RXTO_SOURCE_STATUS BIT(25)
|
||
/*
|
||
* RW. RX TIMEOUT Enable. Valid for FIFO and DMA.
|
||
* Warning: If this bit is set to 0, the RX timeout will not affect receive DMA
|
||
* operation. If this bit is set to 1, a receive timeout will cause the receive
|
||
* DMA logic to terminate by filling the remaining DMA bytes with garbage data.
|
||
*/
|
||
#define ASM9260_BM_CTRL0_RXTO_ENABLE BIT(24)
|
||
/*
|
||
* RW. Receive Timeout Counter Value: number of 8-bit-time to wait before
|
||
* asserting timeout on the RX input. If the RXFIFO is not empty and the RX
|
||
* input is idle, then the watchdog counter will decrement each bit-time. Note
|
||
* 7-bit-time is added to the programmed value, so a value of zero will set
|
||
* the counter to 7-bit-time, a value of 0x1 gives 15-bit-time and so on. Also
|
||
* note that the counter is reloaded at the end of each frame, so if the frame
|
||
* is 10 bits long and the timeout counter value is zero, then timeout will
|
||
* occur (when FIFO is not empty) even if the RX input is not idle. The default
|
||
* value is 0x3 (31 bit-time).
|
||
*/
|
||
#define ASM9260_BM_CTRL0_RXTO_MASK (0xff << 16)
|
||
/* TIMEOUT = (100*7+1)*(1/BAUD) */
|
||
#define ASM9260_BM_CTRL0_DEFAULT_RXTIMEOUT (20 << 16)
|
||
|
||
/* TX ctrl register */
|
||
#define ASM9260_HW_CTRL1 0x0010
|
||
/*
|
||
* RW. Tell the UART to execute the TX DMA Command. The
|
||
* UART will clear this bit at the end of transmit execution.
|
||
*/
|
||
#define ASM9260_BM_CTRL1_TXDMA_RUN BIT(28)
|
||
|
||
#define ASM9260_HW_CTRL2 0x0020
|
||
/*
|
||
* RW. Receive Interrupt FIFO Level Select.
|
||
* The trigger points for the receive interrupt are as follows:
|
||
* ONE_EIGHTHS = 0x0 Trigger on FIFO full to at least 2 of 16 entries.
|
||
* ONE_QUARTER = 0x1 Trigger on FIFO full to at least 4 of 16 entries.
|
||
* ONE_HALF = 0x2 Trigger on FIFO full to at least 8 of 16 entries.
|
||
* THREE_QUARTERS = 0x3 Trigger on FIFO full to at least 12 of 16 entries.
|
||
* SEVEN_EIGHTHS = 0x4 Trigger on FIFO full to at least 14 of 16 entries.
|
||
*/
|
||
#define ASM9260_BM_CTRL2_RXIFLSEL (7 << 20)
|
||
#define ASM9260_BM_CTRL2_DEFAULT_RXIFLSEL (3 << 20)
|
||
/* RW. Same as RXIFLSEL */
|
||
#define ASM9260_BM_CTRL2_TXIFLSEL (7 << 16)
|
||
#define ASM9260_BM_CTRL2_DEFAULT_TXIFLSEL (2 << 16)
|
||
/* RW. Set DTR. When this bit is 1, the output is 0. */
|
||
#define ASM9260_BM_CTRL2_DTR BIT(10)
|
||
/* RW. Loop Back Enable */
|
||
#define ASM9260_BM_CTRL2_LBE BIT(7)
|
||
#define ASM9260_BM_CTRL2_PORT_ENABLE BIT(0)
|
||
|
||
#define ASM9260_HW_LINECTRL 0x0030
|
||
/*
|
||
* RW. Stick Parity Select. When bits 1, 2, and 7 of this register are set, the
|
||
* parity bit is transmitted and checked as a 0. When bits 1 and 7 are set,
|
||
* and bit 2 is 0, the parity bit is transmitted and checked as a 1. When this
|
||
* bit is cleared stick parity is disabled.
|
||
*/
|
||
#define ASM9260_BM_LCTRL_SPS BIT(7)
|
||
/* RW. Word length */
|
||
#define ASM9260_BM_LCTRL_WLEN (3 << 5)
|
||
#define ASM9260_BM_LCTRL_CHRL_5 (0 << 5)
|
||
#define ASM9260_BM_LCTRL_CHRL_6 (1 << 5)
|
||
#define ASM9260_BM_LCTRL_CHRL_7 (2 << 5)
|
||
#define ASM9260_BM_LCTRL_CHRL_8 (3 << 5)
|
||
|
||
/*
|
||
* Interrupt register.
|
||
* contains the interrupt enables and the interrupt status bits
|
||
*/
|
||
#define ASM9260_HW_INTR 0x0040
|
||
/* Tx FIFO EMPTY Raw Interrupt enable */
|
||
#define ASM9260_BM_INTR_TFEIEN BIT(27)
|
||
/* Overrun Error Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_OEIEN BIT(26)
|
||
/* Break Error Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_BEIEN BIT(25)
|
||
/* Parity Error Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_PEIEN BIT(24)
|
||
/* Framing Error Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_FEIEN BIT(23)
|
||
|
||
/* nUARTDSR Modem Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_DSRMIEN BIT(19)
|
||
/* nUARTDCD Modem Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_DCDMIEN BIT(18)
|
||
/* nUARTRI Modem Interrupt Enable. */
|
||
#define ASM9260_BM_INTR_RIMIEN BIT(16)
|
||
/* Auto-Boud Timeout */
|
||
#define ASM9260_BM_INTR_ABTO BIT(13)
|
||
#define ASM9260_BM_INTR_ABEO BIT(12)
|
||
/* Tx FIFO EMPTY Raw Interrupt state */
|
||
#define ASM9260_BM_INTR_TFEIS BIT(11)
|
||
/* Overrun Error */
|
||
#define ASM9260_BM_INTR_OEIS BIT(10)
|
||
/* Break Error */
|
||
#define ASM9260_BM_INTR_BEIS BIT(9)
|
||
/* Parity Error */
|
||
#define ASM9260_BM_INTR_PEIS BIT(8)
|
||
/* Framing Error */
|
||
#define ASM9260_BM_INTR_FEIS BIT(7)
|
||
#define ASM9260_BM_INTR_DSRMIS BIT(3)
|
||
#define ASM9260_BM_INTR_DCDMIS BIT(2)
|
||
#define ASM9260_BM_INTR_RIMIS BIT(0)
|
||
|
||
/*
|
||
* RW. In DMA mode, up to 4 Received/Transmit characters can be accessed at a
|
||
* time. In PIO mode, only one character can be accessed at a time. The status
|
||
* register contains the receive data flags and valid bits.
|
||
*/
|
||
#define ASM9260_HW_DATA 0x0050
|
||
|
||
#define ASM9260_HW_STAT 0x0060
|
||
/* RO. If 1, UARTAPP is present in this product. */
|
||
#define ASM9260_BM_STAT_PRESENT BIT(31)
|
||
/* RO. If 1, HISPEED is present in this product. */
|
||
#define ASM9260_BM_STAT_HISPEED BIT(30)
|
||
/* RO. Receive FIFO Full. */
|
||
#define ASM9260_BM_STAT_RXFULL BIT(26)
|
||
|
||
/* RO. The UART Debug Register contains the state of the DMA signals. */
|
||
#define ASM9260_HW_DEBUG 0x0070
|
||
/* DMA Command Run Status */
|
||
#define ASM9260_BM_DEBUG_TXDMARUN BIT(5)
|
||
#define ASM9260_BM_DEBUG_RXDMARUN BIT(4)
|
||
/* DMA Command End Status */
|
||
#define ASM9260_BM_DEBUG_TXCMDEND BIT(3)
|
||
#define ASM9260_BM_DEBUG_RXCMDEND BIT(2)
|
||
/* DMA Request Status */
|
||
#define ASM9260_BM_DEBUG_TXDMARQ BIT(1)
|
||
#define ASM9260_BM_DEBUG_RXDMARQ BIT(0)
|
||
|
||
#define ASM9260_HW_ILPR 0x0080
|
||
|
||
#define ASM9260_HW_RS485CTRL 0x0090
|
||
/*
|
||
* RW. This bit reverses the polarity of the direction control signal on the RTS
|
||
* (or DTR) pin.
|
||
* If 0, The direction control pin will be driven to logic ‘0’ when the
|
||
* transmitter has data to be sent. It will be driven to logic ‘1’ after the
|
||
* last bit of data has been transmitted.
|
||
*/
|
||
#define ASM9260_BM_RS485CTRL_ONIV BIT(5)
|
||
/* RW. Enable Auto Direction Control. */
|
||
#define ASM9260_BM_RS485CTRL_DIR_CTRL BIT(4)
|
||
/*
|
||
* RW. If 0 and DIR_CTRL = 1, pin RTS is used for direction control.
|
||
* If 1 and DIR_CTRL = 1, pin DTR is used for direction control.
|
||
*/
|
||
#define ASM9260_BM_RS485CTRL_PINSEL BIT(3)
|
||
/* RW. Enable Auto Address Detect (AAD). */
|
||
#define ASM9260_BM_RS485CTRL_AADEN BIT(2)
|
||
/* RW. Disable receiver. */
|
||
#define ASM9260_BM_RS485CTRL_RXDIS BIT(1)
|
||
/* RW. Enable RS-485/EIA-485 Normal Multidrop Mode (NMM) */
|
||
#define ASM9260_BM_RS485CTRL_RS485EN BIT(0)
|
||
|
||
#define ASM9260_HW_RS485ADRMATCH 0x00a0
|
||
/* Contains the address match value. */
|
||
#define ASM9260_BM_RS485ADRMATCH_MASK (0xff << 0)
|
||
|
||
#define ASM9260_HW_RS485DLY 0x00b0
|
||
/*
|
||
* RW. Contains the direction control (RTS or DTR) delay value. This delay time
|
||
* is in periods of the baud clock.
|
||
*/
|
||
#define ASM9260_BM_RS485DLY_MASK (0xff << 0)
|
||
|
||
#define ASM9260_HW_AUTOBAUD 0x00c0
|
||
/* WO. Auto-baud time-out interrupt clear bit. */
|
||
#define ASM9260_BM_AUTOBAUD_TO_INT_CLR BIT(9)
|
||
/* WO. End of auto-baud interrupt clear bit. */
|
||
#define ASM9260_BM_AUTOBAUD_EO_INT_CLR BIT(8)
|
||
/* Restart in case of timeout (counter restarts at next UART Rx falling edge) */
|
||
#define ASM9260_BM_AUTOBAUD_AUTORESTART BIT(2)
|
||
/* Auto-baud mode select bit. 0 - Mode 0, 1 - Mode 1. */
|
||
#define ASM9260_BM_AUTOBAUD_MODE BIT(1)
|
||
/*
|
||
* Auto-baud start (auto-baud is running). Auto-baud run bit. This bit is
|
||
* automatically cleared after auto-baud completion.
|
||
*/
|
||
#define ASM9260_BM_AUTOBAUD_START BIT(0)
|
||
|
||
#define ASM9260_HW_CTRL3 0x00d0
|
||
#define ASM9260_BM_CTRL3_OUTCLK_DIV_MASK (0xffff << 16)
|
||
/*
|
||
* RW. Provide clk over OUTCLK pin. In case of asm9260 it can be configured on
|
||
* pins 137 and 144.
|
||
*/
|
||
#define ASM9260_BM_CTRL3_MASTERMODE BIT(6)
|
||
/* RW. Baud Rate Mode: 1 - Enable sync mode. 0 - async mode. */
|
||
#define ASM9260_BM_CTRL3_SYNCMODE BIT(4)
|
||
/* RW. 1 - MSB bit send frist; 0 - LSB bit frist. */
|
||
#define ASM9260_BM_CTRL3_MSBF BIT(2)
|
||
/* RW. 1 - sample rate = 8 x Baudrate; 0 - sample rate = 16 x Baudrate. */
|
||
#define ASM9260_BM_CTRL3_BAUD8 BIT(1)
|
||
/* RW. 1 - Set word length to 9bit. 0 - use ASM9260_BM_LCTRL_WLEN */
|
||
#define ASM9260_BM_CTRL3_9BIT BIT(0)
|
||
|
||
#define ASM9260_HW_ISO7816_CTRL 0x00e0
|
||
/* RW. Enable High Speed mode. */
|
||
#define ASM9260_BM_ISO7816CTRL_HS BIT(12)
|
||
/* Disable Successive Receive NACK */
|
||
#define ASM9260_BM_ISO7816CTRL_DS_NACK BIT(8)
|
||
#define ASM9260_BM_ISO7816CTRL_MAX_ITER_MASK (0xff << 4)
|
||
/* Receive NACK Inhibit */
|
||
#define ASM9260_BM_ISO7816CTRL_INACK BIT(3)
|
||
#define ASM9260_BM_ISO7816CTRL_NEG_DATA BIT(2)
|
||
/* RW. 1 - ISO7816 mode; 0 - USART mode */
|
||
#define ASM9260_BM_ISO7816CTRL_ENABLE BIT(0)
|
||
|
||
#define ASM9260_HW_ISO7816_ERRCNT 0x00f0
|
||
/* Parity error counter. Will be cleared after reading */
|
||
#define ASM9260_BM_ISO7816_NB_ERRORS_MASK (0xff << 0)
|
||
|
||
#define ASM9260_HW_ISO7816_STATUS 0x0100
|
||
/* Max number of Repetitions Reached */
|
||
#define ASM9260_BM_ISO7816_STAT_ITERATION BIT(0)
|
||
|
||
/* End of Alphascale asm9260 defines */
|
||
|
||
static struct uart_driver auart_driver;
|
||
|
||
enum mxs_auart_type {
|
||
IMX23_AUART,
|
||
IMX28_AUART,
|
||
ASM9260_AUART,
|
||
};
|
||
|
||
struct vendor_data {
|
||
const u16 *reg_offset;
|
||
};
|
||
|
||
enum {
|
||
REG_CTRL0,
|
||
REG_CTRL1,
|
||
REG_CTRL2,
|
||
REG_LINECTRL,
|
||
REG_LINECTRL2,
|
||
REG_INTR,
|
||
REG_DATA,
|
||
REG_STAT,
|
||
REG_DEBUG,
|
||
REG_VERSION,
|
||
REG_AUTOBAUD,
|
||
|
||
/* The size of the array - must be last */
|
||
REG_ARRAY_SIZE,
|
||
};
|
||
|
||
static const u16 mxs_asm9260_offsets[REG_ARRAY_SIZE] = {
|
||
[REG_CTRL0] = ASM9260_HW_CTRL0,
|
||
[REG_CTRL1] = ASM9260_HW_CTRL1,
|
||
[REG_CTRL2] = ASM9260_HW_CTRL2,
|
||
[REG_LINECTRL] = ASM9260_HW_LINECTRL,
|
||
[REG_INTR] = ASM9260_HW_INTR,
|
||
[REG_DATA] = ASM9260_HW_DATA,
|
||
[REG_STAT] = ASM9260_HW_STAT,
|
||
[REG_DEBUG] = ASM9260_HW_DEBUG,
|
||
[REG_AUTOBAUD] = ASM9260_HW_AUTOBAUD,
|
||
};
|
||
|
||
static const u16 mxs_stmp37xx_offsets[REG_ARRAY_SIZE] = {
|
||
[REG_CTRL0] = AUART_CTRL0,
|
||
[REG_CTRL1] = AUART_CTRL1,
|
||
[REG_CTRL2] = AUART_CTRL2,
|
||
[REG_LINECTRL] = AUART_LINECTRL,
|
||
[REG_LINECTRL2] = AUART_LINECTRL2,
|
||
[REG_INTR] = AUART_INTR,
|
||
[REG_DATA] = AUART_DATA,
|
||
[REG_STAT] = AUART_STAT,
|
||
[REG_DEBUG] = AUART_DEBUG,
|
||
[REG_VERSION] = AUART_VERSION,
|
||
[REG_AUTOBAUD] = AUART_AUTOBAUD,
|
||
};
|
||
|
||
static const struct vendor_data vendor_alphascale_asm9260 = {
|
||
.reg_offset = mxs_asm9260_offsets,
|
||
};
|
||
|
||
static const struct vendor_data vendor_freescale_stmp37xx = {
|
||
.reg_offset = mxs_stmp37xx_offsets,
|
||
};
|
||
|
||
struct mxs_auart_port {
|
||
struct uart_port port;
|
||
|
||
#define MXS_AUART_DMA_ENABLED 0x2
|
||
#define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */
|
||
#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */
|
||
#define MXS_AUART_RTSCTS 4 /* bit 4 */
|
||
unsigned long flags;
|
||
unsigned int mctrl_prev;
|
||
enum mxs_auart_type devtype;
|
||
const struct vendor_data *vendor;
|
||
|
||
struct clk *clk;
|
||
struct clk *clk_ahb;
|
||
struct device *dev;
|
||
|
||
/* for DMA */
|
||
struct scatterlist tx_sgl;
|
||
struct dma_chan *tx_dma_chan;
|
||
void *tx_dma_buf;
|
||
|
||
struct scatterlist rx_sgl;
|
||
struct dma_chan *rx_dma_chan;
|
||
void *rx_dma_buf;
|
||
|
||
struct mctrl_gpios *gpios;
|
||
int gpio_irq[UART_GPIO_MAX];
|
||
bool ms_irq_enabled;
|
||
};
|
||
|
||
static const struct platform_device_id mxs_auart_devtype[] = {
|
||
{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
|
||
{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
|
||
{ .name = "as-auart-asm9260", .driver_data = ASM9260_AUART },
|
||
{ /* sentinel */ }
|
||
};
|
||
MODULE_DEVICE_TABLE(platform, mxs_auart_devtype);
|
||
|
||
static const struct of_device_id mxs_auart_dt_ids[] = {
|
||
{
|
||
.compatible = "fsl,imx28-auart",
|
||
.data = &mxs_auart_devtype[IMX28_AUART]
|
||
}, {
|
||
.compatible = "fsl,imx23-auart",
|
||
.data = &mxs_auart_devtype[IMX23_AUART]
|
||
}, {
|
||
.compatible = "alphascale,asm9260-auart",
|
||
.data = &mxs_auart_devtype[ASM9260_AUART]
|
||
}, { /* sentinel */ }
|
||
};
|
||
MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
|
||
|
||
static inline int is_imx28_auart(struct mxs_auart_port *s)
|
||
{
|
||
return s->devtype == IMX28_AUART;
|
||
}
|
||
|
||
static inline int is_asm9260_auart(struct mxs_auart_port *s)
|
||
{
|
||
return s->devtype == ASM9260_AUART;
|
||
}
|
||
|
||
static inline bool auart_dma_enabled(struct mxs_auart_port *s)
|
||
{
|
||
return s->flags & MXS_AUART_DMA_ENABLED;
|
||
}
|
||
|
||
static unsigned int mxs_reg_to_offset(const struct mxs_auart_port *uap,
|
||
unsigned int reg)
|
||
{
|
||
return uap->vendor->reg_offset[reg];
|
||
}
|
||
|
||
static unsigned int mxs_read(const struct mxs_auart_port *uap,
|
||
unsigned int reg)
|
||
{
|
||
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
|
||
|
||
return readl_relaxed(addr);
|
||
}
|
||
|
||
static void mxs_write(unsigned int val, struct mxs_auart_port *uap,
|
||
unsigned int reg)
|
||
{
|
||
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
|
||
|
||
writel_relaxed(val, addr);
|
||
}
|
||
|
||
static void mxs_set(unsigned int val, struct mxs_auart_port *uap,
|
||
unsigned int reg)
|
||
{
|
||
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
|
||
|
||
writel_relaxed(val, addr + SET_REG);
|
||
}
|
||
|
||
static void mxs_clr(unsigned int val, struct mxs_auart_port *uap,
|
||
unsigned int reg)
|
||
{
|
||
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
|
||
|
||
writel_relaxed(val, addr + CLR_REG);
|
||
}
|
||
|
||
static void mxs_auart_stop_tx(struct uart_port *u);
|
||
|
||
#define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
|
||
|
||
static void mxs_auart_tx_chars(struct mxs_auart_port *s);
|
||
|
||
static void dma_tx_callback(void *param)
|
||
{
|
||
struct mxs_auart_port *s = param;
|
||
struct circ_buf *xmit = &s->port.state->xmit;
|
||
|
||
dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE);
|
||
|
||
/* clear the bit used to serialize the DMA tx. */
|
||
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
|
||
smp_mb__after_atomic();
|
||
|
||
/* wake up the possible processes. */
|
||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||
uart_write_wakeup(&s->port);
|
||
|
||
mxs_auart_tx_chars(s);
|
||
}
|
||
|
||
static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
|
||
{
|
||
struct dma_async_tx_descriptor *desc;
|
||
struct scatterlist *sgl = &s->tx_sgl;
|
||
struct dma_chan *channel = s->tx_dma_chan;
|
||
u32 pio;
|
||
|
||
/* [1] : send PIO. Note, the first pio word is CTRL1. */
|
||
pio = AUART_CTRL1_XFER_COUNT(size);
|
||
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio,
|
||
1, DMA_TRANS_NONE, 0);
|
||
if (!desc) {
|
||
dev_err(s->dev, "step 1 error\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* [2] : set DMA buffer. */
|
||
sg_init_one(sgl, s->tx_dma_buf, size);
|
||
dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE);
|
||
desc = dmaengine_prep_slave_sg(channel, sgl,
|
||
1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||
if (!desc) {
|
||
dev_err(s->dev, "step 2 error\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* [3] : submit the DMA */
|
||
desc->callback = dma_tx_callback;
|
||
desc->callback_param = s;
|
||
dmaengine_submit(desc);
|
||
dma_async_issue_pending(channel);
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_tx_chars(struct mxs_auart_port *s)
|
||
{
|
||
struct circ_buf *xmit = &s->port.state->xmit;
|
||
|
||
if (auart_dma_enabled(s)) {
|
||
u32 i = 0;
|
||
int size;
|
||
void *buffer = s->tx_dma_buf;
|
||
|
||
if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags))
|
||
return;
|
||
|
||
while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
|
||
size = min_t(u32, UART_XMIT_SIZE - i,
|
||
CIRC_CNT_TO_END(xmit->head,
|
||
xmit->tail,
|
||
UART_XMIT_SIZE));
|
||
memcpy(buffer + i, xmit->buf + xmit->tail, size);
|
||
xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1);
|
||
|
||
i += size;
|
||
if (i >= UART_XMIT_SIZE)
|
||
break;
|
||
}
|
||
|
||
if (uart_tx_stopped(&s->port))
|
||
mxs_auart_stop_tx(&s->port);
|
||
|
||
if (i) {
|
||
mxs_auart_dma_tx(s, i);
|
||
} else {
|
||
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
|
||
smp_mb__after_atomic();
|
||
}
|
||
return;
|
||
}
|
||
|
||
|
||
while (!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF)) {
|
||
if (s->port.x_char) {
|
||
s->port.icount.tx++;
|
||
mxs_write(s->port.x_char, s, REG_DATA);
|
||
s->port.x_char = 0;
|
||
continue;
|
||
}
|
||
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
|
||
s->port.icount.tx++;
|
||
mxs_write(xmit->buf[xmit->tail], s, REG_DATA);
|
||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||
} else
|
||
break;
|
||
}
|
||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||
uart_write_wakeup(&s->port);
|
||
|
||
if (uart_circ_empty(&(s->port.state->xmit)))
|
||
mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
|
||
else
|
||
mxs_set(AUART_INTR_TXIEN, s, REG_INTR);
|
||
|
||
if (uart_tx_stopped(&s->port))
|
||
mxs_auart_stop_tx(&s->port);
|
||
}
|
||
|
||
static void mxs_auart_rx_char(struct mxs_auart_port *s)
|
||
{
|
||
int flag;
|
||
u32 stat;
|
||
u8 c;
|
||
|
||
c = mxs_read(s, REG_DATA);
|
||
stat = mxs_read(s, REG_STAT);
|
||
|
||
flag = TTY_NORMAL;
|
||
s->port.icount.rx++;
|
||
|
||
if (stat & AUART_STAT_BERR) {
|
||
s->port.icount.brk++;
|
||
if (uart_handle_break(&s->port))
|
||
goto out;
|
||
} else if (stat & AUART_STAT_PERR) {
|
||
s->port.icount.parity++;
|
||
} else if (stat & AUART_STAT_FERR) {
|
||
s->port.icount.frame++;
|
||
}
|
||
|
||
/*
|
||
* Mask off conditions which should be ingored.
|
||
*/
|
||
stat &= s->port.read_status_mask;
|
||
|
||
if (stat & AUART_STAT_BERR) {
|
||
flag = TTY_BREAK;
|
||
} else if (stat & AUART_STAT_PERR)
|
||
flag = TTY_PARITY;
|
||
else if (stat & AUART_STAT_FERR)
|
||
flag = TTY_FRAME;
|
||
|
||
if (stat & AUART_STAT_OERR)
|
||
s->port.icount.overrun++;
|
||
|
||
if (uart_handle_sysrq_char(&s->port, c))
|
||
goto out;
|
||
|
||
uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag);
|
||
out:
|
||
mxs_write(stat, s, REG_STAT);
|
||
}
|
||
|
||
static void mxs_auart_rx_chars(struct mxs_auart_port *s)
|
||
{
|
||
u32 stat = 0;
|
||
|
||
for (;;) {
|
||
stat = mxs_read(s, REG_STAT);
|
||
if (stat & AUART_STAT_RXFE)
|
||
break;
|
||
mxs_auart_rx_char(s);
|
||
}
|
||
|
||
mxs_write(stat, s, REG_STAT);
|
||
tty_flip_buffer_push(&s->port.state->port);
|
||
}
|
||
|
||
static int mxs_auart_request_port(struct uart_port *u)
|
||
{
|
||
return 0;
|
||
}
|
||
|
||
static int mxs_auart_verify_port(struct uart_port *u,
|
||
struct serial_struct *ser)
|
||
{
|
||
if (u->type != PORT_UNKNOWN && u->type != PORT_IMX)
|
||
return -EINVAL;
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_config_port(struct uart_port *u, int flags)
|
||
{
|
||
}
|
||
|
||
static const char *mxs_auart_type(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
return dev_name(s->dev);
|
||
}
|
||
|
||
static void mxs_auart_release_port(struct uart_port *u)
|
||
{
|
||
}
|
||
|
||
static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
u32 ctrl = mxs_read(s, REG_CTRL2);
|
||
|
||
ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
|
||
if (mctrl & TIOCM_RTS) {
|
||
if (uart_cts_enabled(u))
|
||
ctrl |= AUART_CTRL2_RTSEN;
|
||
else
|
||
ctrl |= AUART_CTRL2_RTS;
|
||
}
|
||
|
||
mxs_write(ctrl, s, REG_CTRL2);
|
||
|
||
mctrl_gpio_set(s->gpios, mctrl);
|
||
}
|
||
|
||
#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
|
||
static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl)
|
||
{
|
||
u32 mctrl_diff;
|
||
|
||
mctrl_diff = mctrl ^ s->mctrl_prev;
|
||
s->mctrl_prev = mctrl;
|
||
if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled &&
|
||
s->port.state != NULL) {
|
||
if (mctrl_diff & TIOCM_RI)
|
||
s->port.icount.rng++;
|
||
if (mctrl_diff & TIOCM_DSR)
|
||
s->port.icount.dsr++;
|
||
if (mctrl_diff & TIOCM_CD)
|
||
uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD);
|
||
if (mctrl_diff & TIOCM_CTS)
|
||
uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS);
|
||
|
||
wake_up_interruptible(&s->port.state->port.delta_msr_wait);
|
||
}
|
||
return mctrl;
|
||
}
|
||
|
||
static u32 mxs_auart_get_mctrl(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
u32 stat = mxs_read(s, REG_STAT);
|
||
u32 mctrl = 0;
|
||
|
||
if (stat & AUART_STAT_CTS)
|
||
mctrl |= TIOCM_CTS;
|
||
|
||
return mctrl_gpio_get(s->gpios, &mctrl);
|
||
}
|
||
|
||
/*
|
||
* Enable modem status interrupts
|
||
*/
|
||
static void mxs_auart_enable_ms(struct uart_port *port)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(port);
|
||
|
||
/*
|
||
* Interrupt should not be enabled twice
|
||
*/
|
||
if (s->ms_irq_enabled)
|
||
return;
|
||
|
||
s->ms_irq_enabled = true;
|
||
|
||
if (s->gpio_irq[UART_GPIO_CTS] >= 0)
|
||
enable_irq(s->gpio_irq[UART_GPIO_CTS]);
|
||
/* TODO: enable AUART_INTR_CTSMIEN otherwise */
|
||
|
||
if (s->gpio_irq[UART_GPIO_DSR] >= 0)
|
||
enable_irq(s->gpio_irq[UART_GPIO_DSR]);
|
||
|
||
if (s->gpio_irq[UART_GPIO_RI] >= 0)
|
||
enable_irq(s->gpio_irq[UART_GPIO_RI]);
|
||
|
||
if (s->gpio_irq[UART_GPIO_DCD] >= 0)
|
||
enable_irq(s->gpio_irq[UART_GPIO_DCD]);
|
||
}
|
||
|
||
/*
|
||
* Disable modem status interrupts
|
||
*/
|
||
static void mxs_auart_disable_ms(struct uart_port *port)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(port);
|
||
|
||
/*
|
||
* Interrupt should not be disabled twice
|
||
*/
|
||
if (!s->ms_irq_enabled)
|
||
return;
|
||
|
||
s->ms_irq_enabled = false;
|
||
|
||
if (s->gpio_irq[UART_GPIO_CTS] >= 0)
|
||
disable_irq(s->gpio_irq[UART_GPIO_CTS]);
|
||
/* TODO: disable AUART_INTR_CTSMIEN otherwise */
|
||
|
||
if (s->gpio_irq[UART_GPIO_DSR] >= 0)
|
||
disable_irq(s->gpio_irq[UART_GPIO_DSR]);
|
||
|
||
if (s->gpio_irq[UART_GPIO_RI] >= 0)
|
||
disable_irq(s->gpio_irq[UART_GPIO_RI]);
|
||
|
||
if (s->gpio_irq[UART_GPIO_DCD] >= 0)
|
||
disable_irq(s->gpio_irq[UART_GPIO_DCD]);
|
||
}
|
||
|
||
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
|
||
static void dma_rx_callback(void *arg)
|
||
{
|
||
struct mxs_auart_port *s = (struct mxs_auart_port *) arg;
|
||
struct tty_port *port = &s->port.state->port;
|
||
int count;
|
||
u32 stat;
|
||
|
||
dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE);
|
||
|
||
stat = mxs_read(s, REG_STAT);
|
||
stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR |
|
||
AUART_STAT_PERR | AUART_STAT_FERR);
|
||
|
||
count = stat & AUART_STAT_RXCOUNT_MASK;
|
||
tty_insert_flip_string(port, s->rx_dma_buf, count);
|
||
|
||
mxs_write(stat, s, REG_STAT);
|
||
tty_flip_buffer_push(port);
|
||
|
||
/* start the next DMA for RX. */
|
||
mxs_auart_dma_prep_rx(s);
|
||
}
|
||
|
||
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s)
|
||
{
|
||
struct dma_async_tx_descriptor *desc;
|
||
struct scatterlist *sgl = &s->rx_sgl;
|
||
struct dma_chan *channel = s->rx_dma_chan;
|
||
u32 pio[1];
|
||
|
||
/* [1] : send PIO */
|
||
pio[0] = AUART_CTRL0_RXTO_ENABLE
|
||
| AUART_CTRL0_RXTIMEOUT(0x80)
|
||
| AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE);
|
||
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
|
||
1, DMA_TRANS_NONE, 0);
|
||
if (!desc) {
|
||
dev_err(s->dev, "step 1 error\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
/* [2] : send DMA request */
|
||
sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE);
|
||
dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE);
|
||
desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM,
|
||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||
if (!desc) {
|
||
dev_err(s->dev, "step 2 error\n");
|
||
return -1;
|
||
}
|
||
|
||
/* [3] : submit the DMA, but do not issue it. */
|
||
desc->callback = dma_rx_callback;
|
||
desc->callback_param = s;
|
||
dmaengine_submit(desc);
|
||
dma_async_issue_pending(channel);
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s)
|
||
{
|
||
if (s->tx_dma_chan) {
|
||
dma_release_channel(s->tx_dma_chan);
|
||
s->tx_dma_chan = NULL;
|
||
}
|
||
if (s->rx_dma_chan) {
|
||
dma_release_channel(s->rx_dma_chan);
|
||
s->rx_dma_chan = NULL;
|
||
}
|
||
|
||
kfree(s->tx_dma_buf);
|
||
kfree(s->rx_dma_buf);
|
||
s->tx_dma_buf = NULL;
|
||
s->rx_dma_buf = NULL;
|
||
}
|
||
|
||
static void mxs_auart_dma_exit(struct mxs_auart_port *s)
|
||
{
|
||
|
||
mxs_clr(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR,
|
||
s, REG_CTRL2);
|
||
|
||
mxs_auart_dma_exit_channel(s);
|
||
s->flags &= ~MXS_AUART_DMA_ENABLED;
|
||
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
|
||
clear_bit(MXS_AUART_DMA_RX_READY, &s->flags);
|
||
}
|
||
|
||
static int mxs_auart_dma_init(struct mxs_auart_port *s)
|
||
{
|
||
if (auart_dma_enabled(s))
|
||
return 0;
|
||
|
||
/* init for RX */
|
||
s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
|
||
if (!s->rx_dma_chan)
|
||
goto err_out;
|
||
s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
|
||
if (!s->rx_dma_buf)
|
||
goto err_out;
|
||
|
||
/* init for TX */
|
||
s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
|
||
if (!s->tx_dma_chan)
|
||
goto err_out;
|
||
s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
|
||
if (!s->tx_dma_buf)
|
||
goto err_out;
|
||
|
||
/* set the flags */
|
||
s->flags |= MXS_AUART_DMA_ENABLED;
|
||
dev_dbg(s->dev, "enabled the DMA support.");
|
||
|
||
/* The DMA buffer is now the FIFO the TTY subsystem can use */
|
||
s->port.fifosize = UART_XMIT_SIZE;
|
||
|
||
return 0;
|
||
|
||
err_out:
|
||
mxs_auart_dma_exit_channel(s);
|
||
return -EINVAL;
|
||
|
||
}
|
||
|
||
#define RTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
|
||
UART_GPIO_RTS))
|
||
#define CTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
|
||
UART_GPIO_CTS))
|
||
static void mxs_auart_settermios(struct uart_port *u,
|
||
struct ktermios *termios,
|
||
struct ktermios *old)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
u32 bm, ctrl, ctrl2, div;
|
||
unsigned int cflag, baud, baud_min, baud_max;
|
||
|
||
cflag = termios->c_cflag;
|
||
|
||
ctrl = AUART_LINECTRL_FEN;
|
||
ctrl2 = mxs_read(s, REG_CTRL2);
|
||
|
||
/* byte size */
|
||
switch (cflag & CSIZE) {
|
||
case CS5:
|
||
bm = 0;
|
||
break;
|
||
case CS6:
|
||
bm = 1;
|
||
break;
|
||
case CS7:
|
||
bm = 2;
|
||
break;
|
||
case CS8:
|
||
bm = 3;
|
||
break;
|
||
default:
|
||
return;
|
||
}
|
||
|
||
ctrl |= AUART_LINECTRL_WLEN(bm);
|
||
|
||
/* parity */
|
||
if (cflag & PARENB) {
|
||
ctrl |= AUART_LINECTRL_PEN;
|
||
if ((cflag & PARODD) == 0)
|
||
ctrl |= AUART_LINECTRL_EPS;
|
||
}
|
||
|
||
u->read_status_mask = 0;
|
||
|
||
if (termios->c_iflag & INPCK)
|
||
u->read_status_mask |= AUART_STAT_PERR;
|
||
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
||
u->read_status_mask |= AUART_STAT_BERR;
|
||
|
||
/*
|
||
* Characters to ignore
|
||
*/
|
||
u->ignore_status_mask = 0;
|
||
if (termios->c_iflag & IGNPAR)
|
||
u->ignore_status_mask |= AUART_STAT_PERR;
|
||
if (termios->c_iflag & IGNBRK) {
|
||
u->ignore_status_mask |= AUART_STAT_BERR;
|
||
/*
|
||
* If we're ignoring parity and break indicators,
|
||
* ignore overruns too (for real raw support).
|
||
*/
|
||
if (termios->c_iflag & IGNPAR)
|
||
u->ignore_status_mask |= AUART_STAT_OERR;
|
||
}
|
||
|
||
/*
|
||
* ignore all characters if CREAD is not set
|
||
*/
|
||
if (cflag & CREAD)
|
||
ctrl2 |= AUART_CTRL2_RXE;
|
||
else
|
||
ctrl2 &= ~AUART_CTRL2_RXE;
|
||
|
||
/* figure out the stop bits requested */
|
||
if (cflag & CSTOPB)
|
||
ctrl |= AUART_LINECTRL_STP2;
|
||
|
||
/* figure out the hardware flow control settings */
|
||
ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
|
||
if (cflag & CRTSCTS) {
|
||
/*
|
||
* The DMA has a bug(see errata:2836) in mx23.
|
||
* So we can not implement the DMA for auart in mx23,
|
||
* we can only implement the DMA support for auart
|
||
* in mx28.
|
||
*/
|
||
if (is_imx28_auart(s)
|
||
&& test_bit(MXS_AUART_RTSCTS, &s->flags)) {
|
||
if (!mxs_auart_dma_init(s))
|
||
/* enable DMA tranfer */
|
||
ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
|
||
| AUART_CTRL2_DMAONERR;
|
||
}
|
||
/* Even if RTS is GPIO line RTSEN can be enabled because
|
||
* the pinctrl configuration decides about RTS pin function */
|
||
ctrl2 |= AUART_CTRL2_RTSEN;
|
||
if (CTS_AT_AUART())
|
||
ctrl2 |= AUART_CTRL2_CTSEN;
|
||
}
|
||
|
||
/* set baud rate */
|
||
if (is_asm9260_auart(s)) {
|
||
baud = uart_get_baud_rate(u, termios, old,
|
||
u->uartclk * 4 / 0x3FFFFF,
|
||
u->uartclk / 16);
|
||
div = u->uartclk * 4 / baud;
|
||
} else {
|
||
baud_min = DIV_ROUND_UP(u->uartclk * 32,
|
||
AUART_LINECTRL_BAUD_DIV_MAX);
|
||
baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN;
|
||
baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max);
|
||
div = u->uartclk * 32 / baud;
|
||
}
|
||
|
||
ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
|
||
ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
|
||
mxs_write(ctrl, s, REG_LINECTRL);
|
||
|
||
mxs_write(ctrl2, s, REG_CTRL2);
|
||
|
||
uart_update_timeout(u, termios->c_cflag, baud);
|
||
|
||
/* prepare for the DMA RX. */
|
||
if (auart_dma_enabled(s) &&
|
||
!test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) {
|
||
if (!mxs_auart_dma_prep_rx(s)) {
|
||
/* Disable the normal RX interrupt. */
|
||
mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN,
|
||
s, REG_INTR);
|
||
} else {
|
||
mxs_auart_dma_exit(s);
|
||
dev_err(s->dev, "We can not start up the DMA.\n");
|
||
}
|
||
}
|
||
|
||
/* CTS flow-control and modem-status interrupts */
|
||
if (UART_ENABLE_MS(u, termios->c_cflag))
|
||
mxs_auart_enable_ms(u);
|
||
else
|
||
mxs_auart_disable_ms(u);
|
||
}
|
||
|
||
static void mxs_auart_set_ldisc(struct uart_port *port,
|
||
struct ktermios *termios)
|
||
{
|
||
if (termios->c_line == N_PPS) {
|
||
port->flags |= UPF_HARDPPS_CD;
|
||
mxs_auart_enable_ms(port);
|
||
} else {
|
||
port->flags &= ~UPF_HARDPPS_CD;
|
||
}
|
||
}
|
||
|
||
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
|
||
{
|
||
u32 istat;
|
||
struct mxs_auart_port *s = context;
|
||
u32 mctrl_temp = s->mctrl_prev;
|
||
u32 stat = mxs_read(s, REG_STAT);
|
||
|
||
istat = mxs_read(s, REG_INTR);
|
||
|
||
/* ack irq */
|
||
mxs_clr(istat & (AUART_INTR_RTIS | AUART_INTR_TXIS | AUART_INTR_RXIS
|
||
| AUART_INTR_CTSMIS), s, REG_INTR);
|
||
|
||
/*
|
||
* Dealing with GPIO interrupt
|
||
*/
|
||
if (irq == s->gpio_irq[UART_GPIO_CTS] ||
|
||
irq == s->gpio_irq[UART_GPIO_DCD] ||
|
||
irq == s->gpio_irq[UART_GPIO_DSR] ||
|
||
irq == s->gpio_irq[UART_GPIO_RI])
|
||
mxs_auart_modem_status(s,
|
||
mctrl_gpio_get(s->gpios, &mctrl_temp));
|
||
|
||
if (istat & AUART_INTR_CTSMIS) {
|
||
if (CTS_AT_AUART() && s->ms_irq_enabled)
|
||
uart_handle_cts_change(&s->port,
|
||
stat & AUART_STAT_CTS);
|
||
mxs_clr(AUART_INTR_CTSMIS, s, REG_INTR);
|
||
istat &= ~AUART_INTR_CTSMIS;
|
||
}
|
||
|
||
if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
|
||
if (!auart_dma_enabled(s))
|
||
mxs_auart_rx_chars(s);
|
||
istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
|
||
}
|
||
|
||
if (istat & AUART_INTR_TXIS) {
|
||
mxs_auart_tx_chars(s);
|
||
istat &= ~AUART_INTR_TXIS;
|
||
}
|
||
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
static void mxs_auart_reset_deassert(struct mxs_auart_port *s)
|
||
{
|
||
int i;
|
||
unsigned int reg;
|
||
|
||
mxs_clr(AUART_CTRL0_SFTRST, s, REG_CTRL0);
|
||
|
||
for (i = 0; i < 10000; i++) {
|
||
reg = mxs_read(s, REG_CTRL0);
|
||
if (!(reg & AUART_CTRL0_SFTRST))
|
||
break;
|
||
udelay(3);
|
||
}
|
||
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
|
||
}
|
||
|
||
static void mxs_auart_reset_assert(struct mxs_auart_port *s)
|
||
{
|
||
int i;
|
||
u32 reg;
|
||
|
||
reg = mxs_read(s, REG_CTRL0);
|
||
/* if already in reset state, keep it untouched */
|
||
if (reg & AUART_CTRL0_SFTRST)
|
||
return;
|
||
|
||
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
|
||
mxs_set(AUART_CTRL0_SFTRST, s, REG_CTRL0);
|
||
|
||
for (i = 0; i < 1000; i++) {
|
||
reg = mxs_read(s, REG_CTRL0);
|
||
/* reset is finished when the clock is gated */
|
||
if (reg & AUART_CTRL0_CLKGATE)
|
||
return;
|
||
udelay(10);
|
||
}
|
||
|
||
dev_err(s->dev, "Failed to reset the unit.");
|
||
}
|
||
|
||
static int mxs_auart_startup(struct uart_port *u)
|
||
{
|
||
int ret;
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
ret = clk_prepare_enable(s->clk);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (uart_console(u)) {
|
||
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
|
||
} else {
|
||
/* reset the unit to a well known state */
|
||
mxs_auart_reset_assert(s);
|
||
mxs_auart_reset_deassert(s);
|
||
}
|
||
|
||
mxs_set(AUART_CTRL2_UARTEN, s, REG_CTRL2);
|
||
|
||
mxs_write(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
|
||
s, REG_INTR);
|
||
|
||
/* Reset FIFO size (it could have changed if DMA was enabled) */
|
||
u->fifosize = MXS_AUART_FIFO_SIZE;
|
||
|
||
/*
|
||
* Enable fifo so all four bytes of a DMA word are written to
|
||
* output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
|
||
*/
|
||
mxs_set(AUART_LINECTRL_FEN, s, REG_LINECTRL);
|
||
|
||
/* get initial status of modem lines */
|
||
mctrl_gpio_get(s->gpios, &s->mctrl_prev);
|
||
|
||
s->ms_irq_enabled = false;
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_shutdown(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
mxs_auart_disable_ms(u);
|
||
|
||
if (auart_dma_enabled(s))
|
||
mxs_auart_dma_exit(s);
|
||
|
||
if (uart_console(u)) {
|
||
mxs_clr(AUART_CTRL2_UARTEN, s, REG_CTRL2);
|
||
|
||
mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN |
|
||
AUART_INTR_CTSMIEN, s, REG_INTR);
|
||
mxs_set(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
|
||
} else {
|
||
mxs_auart_reset_assert(s);
|
||
}
|
||
|
||
clk_disable_unprepare(s->clk);
|
||
}
|
||
|
||
static unsigned int mxs_auart_tx_empty(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
if ((mxs_read(s, REG_STAT) &
|
||
(AUART_STAT_TXFE | AUART_STAT_BUSY)) == AUART_STAT_TXFE)
|
||
return TIOCSER_TEMT;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_start_tx(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
/* enable transmitter */
|
||
mxs_set(AUART_CTRL2_TXE, s, REG_CTRL2);
|
||
|
||
mxs_auart_tx_chars(s);
|
||
}
|
||
|
||
static void mxs_auart_stop_tx(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
mxs_clr(AUART_CTRL2_TXE, s, REG_CTRL2);
|
||
}
|
||
|
||
static void mxs_auart_stop_rx(struct uart_port *u)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
mxs_clr(AUART_CTRL2_RXE, s, REG_CTRL2);
|
||
}
|
||
|
||
static void mxs_auart_break_ctl(struct uart_port *u, int ctl)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(u);
|
||
|
||
if (ctl)
|
||
mxs_set(AUART_LINECTRL_BRK, s, REG_LINECTRL);
|
||
else
|
||
mxs_clr(AUART_LINECTRL_BRK, s, REG_LINECTRL);
|
||
}
|
||
|
||
static struct uart_ops mxs_auart_ops = {
|
||
.tx_empty = mxs_auart_tx_empty,
|
||
.start_tx = mxs_auart_start_tx,
|
||
.stop_tx = mxs_auart_stop_tx,
|
||
.stop_rx = mxs_auart_stop_rx,
|
||
.enable_ms = mxs_auart_enable_ms,
|
||
.break_ctl = mxs_auart_break_ctl,
|
||
.set_mctrl = mxs_auart_set_mctrl,
|
||
.get_mctrl = mxs_auart_get_mctrl,
|
||
.startup = mxs_auart_startup,
|
||
.shutdown = mxs_auart_shutdown,
|
||
.set_termios = mxs_auart_settermios,
|
||
.set_ldisc = mxs_auart_set_ldisc,
|
||
.type = mxs_auart_type,
|
||
.release_port = mxs_auart_release_port,
|
||
.request_port = mxs_auart_request_port,
|
||
.config_port = mxs_auart_config_port,
|
||
.verify_port = mxs_auart_verify_port,
|
||
};
|
||
|
||
static struct mxs_auart_port *auart_port[MXS_AUART_PORTS];
|
||
|
||
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
|
||
static void mxs_auart_console_putchar(struct uart_port *port, int ch)
|
||
{
|
||
struct mxs_auart_port *s = to_auart_port(port);
|
||
unsigned int to = 1000;
|
||
|
||
while (mxs_read(s, REG_STAT) & AUART_STAT_TXFF) {
|
||
if (!to--)
|
||
break;
|
||
udelay(1);
|
||
}
|
||
|
||
mxs_write(ch, s, REG_DATA);
|
||
}
|
||
|
||
static void
|
||
auart_console_write(struct console *co, const char *str, unsigned int count)
|
||
{
|
||
struct mxs_auart_port *s;
|
||
struct uart_port *port;
|
||
unsigned int old_ctrl0, old_ctrl2;
|
||
unsigned int to = 20000;
|
||
|
||
if (co->index >= MXS_AUART_PORTS || co->index < 0)
|
||
return;
|
||
|
||
s = auart_port[co->index];
|
||
port = &s->port;
|
||
|
||
clk_enable(s->clk);
|
||
|
||
/* First save the CR then disable the interrupts */
|
||
old_ctrl2 = mxs_read(s, REG_CTRL2);
|
||
old_ctrl0 = mxs_read(s, REG_CTRL0);
|
||
|
||
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
|
||
mxs_set(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, s, REG_CTRL2);
|
||
|
||
uart_console_write(port, str, count, mxs_auart_console_putchar);
|
||
|
||
/* Finally, wait for transmitter to become empty ... */
|
||
while (mxs_read(s, REG_STAT) & AUART_STAT_BUSY) {
|
||
udelay(1);
|
||
if (!to--)
|
||
break;
|
||
}
|
||
|
||
/*
|
||
* ... and restore the TCR if we waited long enough for the transmitter
|
||
* to be idle. This might keep the transmitter enabled although it is
|
||
* unused, but that is better than to disable it while it is still
|
||
* transmitting.
|
||
*/
|
||
if (!(mxs_read(s, REG_STAT) & AUART_STAT_BUSY)) {
|
||
mxs_write(old_ctrl0, s, REG_CTRL0);
|
||
mxs_write(old_ctrl2, s, REG_CTRL2);
|
||
}
|
||
|
||
clk_disable(s->clk);
|
||
}
|
||
|
||
static void __init
|
||
auart_console_get_options(struct mxs_auart_port *s, int *baud,
|
||
int *parity, int *bits)
|
||
{
|
||
struct uart_port *port = &s->port;
|
||
unsigned int lcr_h, quot;
|
||
|
||
if (!(mxs_read(s, REG_CTRL2) & AUART_CTRL2_UARTEN))
|
||
return;
|
||
|
||
lcr_h = mxs_read(s, REG_LINECTRL);
|
||
|
||
*parity = 'n';
|
||
if (lcr_h & AUART_LINECTRL_PEN) {
|
||
if (lcr_h & AUART_LINECTRL_EPS)
|
||
*parity = 'e';
|
||
else
|
||
*parity = 'o';
|
||
}
|
||
|
||
if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
|
||
*bits = 7;
|
||
else
|
||
*bits = 8;
|
||
|
||
quot = ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVINT_MASK))
|
||
>> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6);
|
||
quot |= ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVFRAC_MASK))
|
||
>> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT;
|
||
if (quot == 0)
|
||
quot = 1;
|
||
|
||
*baud = (port->uartclk << 2) / quot;
|
||
}
|
||
|
||
static int __init
|
||
auart_console_setup(struct console *co, char *options)
|
||
{
|
||
struct mxs_auart_port *s;
|
||
int baud = 9600;
|
||
int bits = 8;
|
||
int parity = 'n';
|
||
int flow = 'n';
|
||
int ret;
|
||
|
||
/*
|
||
* Check whether an invalid uart number has been specified, and
|
||
* if so, search for the first available port that does have
|
||
* console support.
|
||
*/
|
||
if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port))
|
||
co->index = 0;
|
||
s = auart_port[co->index];
|
||
if (!s)
|
||
return -ENODEV;
|
||
|
||
ret = clk_prepare_enable(s->clk);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (options)
|
||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||
else
|
||
auart_console_get_options(s, &baud, &parity, &bits);
|
||
|
||
ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
|
||
|
||
clk_disable_unprepare(s->clk);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static struct console auart_console = {
|
||
.name = "ttyAPP",
|
||
.write = auart_console_write,
|
||
.device = uart_console_device,
|
||
.setup = auart_console_setup,
|
||
.flags = CON_PRINTBUFFER,
|
||
.index = -1,
|
||
.data = &auart_driver,
|
||
};
|
||
#endif
|
||
|
||
static struct uart_driver auart_driver = {
|
||
.owner = THIS_MODULE,
|
||
.driver_name = "ttyAPP",
|
||
.dev_name = "ttyAPP",
|
||
.major = 0,
|
||
.minor = 0,
|
||
.nr = MXS_AUART_PORTS,
|
||
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
|
||
.cons = &auart_console,
|
||
#endif
|
||
};
|
||
|
||
static void mxs_init_regs(struct mxs_auart_port *s)
|
||
{
|
||
if (is_asm9260_auart(s))
|
||
s->vendor = &vendor_alphascale_asm9260;
|
||
else
|
||
s->vendor = &vendor_freescale_stmp37xx;
|
||
}
|
||
|
||
static int mxs_get_clks(struct mxs_auart_port *s,
|
||
struct platform_device *pdev)
|
||
{
|
||
int err;
|
||
|
||
if (!is_asm9260_auart(s)) {
|
||
s->clk = devm_clk_get(&pdev->dev, NULL);
|
||
if (IS_ERR(s->clk))
|
||
return PTR_ERR(s->clk);
|
||
|
||
return 0;
|
||
}
|
||
|
||
s->clk = devm_clk_get(s->dev, "mod");
|
||
if (IS_ERR(s->clk)) {
|
||
dev_err(s->dev, "Failed to get \"mod\" clk\n");
|
||
return PTR_ERR(s->clk);
|
||
}
|
||
|
||
s->clk_ahb = devm_clk_get(s->dev, "ahb");
|
||
if (IS_ERR(s->clk_ahb)) {
|
||
dev_err(s->dev, "Failed to get \"ahb\" clk\n");
|
||
return PTR_ERR(s->clk_ahb);
|
||
}
|
||
|
||
err = clk_prepare_enable(s->clk_ahb);
|
||
if (err) {
|
||
dev_err(s->dev, "Failed to enable ahb_clk!\n");
|
||
return err;
|
||
}
|
||
|
||
err = clk_set_rate(s->clk, clk_get_rate(s->clk_ahb));
|
||
if (err) {
|
||
dev_err(s->dev, "Failed to set rate!\n");
|
||
return err;
|
||
}
|
||
|
||
err = clk_prepare_enable(s->clk);
|
||
if (err) {
|
||
dev_err(s->dev, "Failed to enable clk!\n");
|
||
return err;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
|
||
* could successfully get all information from dt or a negative errno.
|
||
*/
|
||
static int serial_mxs_probe_dt(struct mxs_auart_port *s,
|
||
struct platform_device *pdev)
|
||
{
|
||
struct device_node *np = pdev->dev.of_node;
|
||
int ret;
|
||
|
||
if (!np)
|
||
/* no device tree device */
|
||
return 1;
|
||
|
||
ret = of_alias_get_id(np, "serial");
|
||
if (ret < 0) {
|
||
dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
|
||
return ret;
|
||
}
|
||
s->port.line = ret;
|
||
|
||
if (of_get_property(np, "uart-has-rtscts", NULL) ||
|
||
of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
|
||
set_bit(MXS_AUART_RTSCTS, &s->flags);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
|
||
{
|
||
enum mctrl_gpio_idx i;
|
||
struct gpio_desc *gpiod;
|
||
|
||
s->gpios = mctrl_gpio_init_noauto(dev, 0);
|
||
if (IS_ERR(s->gpios))
|
||
return PTR_ERR(s->gpios);
|
||
|
||
/* Block (enabled before) DMA option if RTS or CTS is GPIO line */
|
||
if (!RTS_AT_AUART() || !CTS_AT_AUART()) {
|
||
if (test_bit(MXS_AUART_RTSCTS, &s->flags))
|
||
dev_warn(dev,
|
||
"DMA and flow control via gpio may cause some problems. DMA disabled!\n");
|
||
clear_bit(MXS_AUART_RTSCTS, &s->flags);
|
||
}
|
||
|
||
for (i = 0; i < UART_GPIO_MAX; i++) {
|
||
gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
|
||
if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
|
||
s->gpio_irq[i] = gpiod_to_irq(gpiod);
|
||
else
|
||
s->gpio_irq[i] = -EINVAL;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
|
||
{
|
||
enum mctrl_gpio_idx i;
|
||
|
||
for (i = 0; i < UART_GPIO_MAX; i++)
|
||
if (s->gpio_irq[i] >= 0)
|
||
free_irq(s->gpio_irq[i], s);
|
||
}
|
||
|
||
static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
|
||
{
|
||
int *irq = s->gpio_irq;
|
||
enum mctrl_gpio_idx i;
|
||
int err = 0;
|
||
|
||
for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
|
||
if (irq[i] < 0)
|
||
continue;
|
||
|
||
irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
|
||
err = request_irq(irq[i], mxs_auart_irq_handle,
|
||
IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
|
||
if (err)
|
||
dev_err(s->dev, "%s - Can't get %d irq\n",
|
||
__func__, irq[i]);
|
||
}
|
||
|
||
/*
|
||
* If something went wrong, rollback.
|
||
*/
|
||
while (err && (--i >= 0))
|
||
if (irq[i] >= 0)
|
||
free_irq(irq[i], s);
|
||
|
||
return err;
|
||
}
|
||
|
||
static int mxs_auart_probe(struct platform_device *pdev)
|
||
{
|
||
const struct of_device_id *of_id =
|
||
of_match_device(mxs_auart_dt_ids, &pdev->dev);
|
||
struct mxs_auart_port *s;
|
||
u32 version;
|
||
int ret, irq;
|
||
struct resource *r;
|
||
|
||
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
|
||
if (!s)
|
||
return -ENOMEM;
|
||
|
||
s->port.dev = &pdev->dev;
|
||
s->dev = &pdev->dev;
|
||
|
||
ret = serial_mxs_probe_dt(s, pdev);
|
||
if (ret > 0)
|
||
s->port.line = pdev->id < 0 ? 0 : pdev->id;
|
||
else if (ret < 0)
|
||
return ret;
|
||
|
||
if (of_id) {
|
||
pdev->id_entry = of_id->data;
|
||
s->devtype = pdev->id_entry->driver_data;
|
||
}
|
||
|
||
ret = mxs_get_clks(s, pdev);
|
||
if (ret)
|
||
return ret;
|
||
|
||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
if (!r)
|
||
return -ENXIO;
|
||
|
||
s->port.mapbase = r->start;
|
||
s->port.membase = ioremap(r->start, resource_size(r));
|
||
s->port.ops = &mxs_auart_ops;
|
||
s->port.iotype = UPIO_MEM;
|
||
s->port.fifosize = MXS_AUART_FIFO_SIZE;
|
||
s->port.uartclk = clk_get_rate(s->clk);
|
||
s->port.type = PORT_IMX;
|
||
|
||
mxs_init_regs(s);
|
||
|
||
s->mctrl_prev = 0;
|
||
|
||
irq = platform_get_irq(pdev, 0);
|
||
if (irq < 0)
|
||
return irq;
|
||
|
||
s->port.irq = irq;
|
||
ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
|
||
dev_name(&pdev->dev), s);
|
||
if (ret)
|
||
return ret;
|
||
|
||
platform_set_drvdata(pdev, s);
|
||
|
||
ret = mxs_auart_init_gpios(s, &pdev->dev);
|
||
if (ret) {
|
||
dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
|
||
return ret;
|
||
}
|
||
|
||
/*
|
||
* Get the GPIO lines IRQ
|
||
*/
|
||
ret = mxs_auart_request_gpio_irq(s);
|
||
if (ret)
|
||
return ret;
|
||
|
||
auart_port[s->port.line] = s;
|
||
|
||
mxs_auart_reset_deassert(s);
|
||
|
||
ret = uart_add_one_port(&auart_driver, &s->port);
|
||
if (ret)
|
||
goto out_free_gpio_irq;
|
||
|
||
/* ASM9260 don't have version reg */
|
||
if (is_asm9260_auart(s)) {
|
||
dev_info(&pdev->dev, "Found APPUART ASM9260\n");
|
||
} else {
|
||
version = mxs_read(s, REG_VERSION);
|
||
dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
|
||
(version >> 24) & 0xff,
|
||
(version >> 16) & 0xff, version & 0xffff);
|
||
}
|
||
|
||
return 0;
|
||
|
||
out_free_gpio_irq:
|
||
mxs_auart_free_gpio_irq(s);
|
||
auart_port[pdev->id] = NULL;
|
||
return ret;
|
||
}
|
||
|
||
static int mxs_auart_remove(struct platform_device *pdev)
|
||
{
|
||
struct mxs_auart_port *s = platform_get_drvdata(pdev);
|
||
|
||
uart_remove_one_port(&auart_driver, &s->port);
|
||
auart_port[pdev->id] = NULL;
|
||
mxs_auart_free_gpio_irq(s);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static struct platform_driver mxs_auart_driver = {
|
||
.probe = mxs_auart_probe,
|
||
.remove = mxs_auart_remove,
|
||
.driver = {
|
||
.name = "mxs-auart",
|
||
.of_match_table = mxs_auart_dt_ids,
|
||
},
|
||
};
|
||
|
||
static int __init mxs_auart_init(void)
|
||
{
|
||
int r;
|
||
|
||
r = uart_register_driver(&auart_driver);
|
||
if (r)
|
||
goto out;
|
||
|
||
r = platform_driver_register(&mxs_auart_driver);
|
||
if (r)
|
||
goto out_err;
|
||
|
||
return 0;
|
||
out_err:
|
||
uart_unregister_driver(&auart_driver);
|
||
out:
|
||
return r;
|
||
}
|
||
|
||
static void __exit mxs_auart_exit(void)
|
||
{
|
||
platform_driver_unregister(&mxs_auart_driver);
|
||
uart_unregister_driver(&auart_driver);
|
||
}
|
||
|
||
module_init(mxs_auart_init);
|
||
module_exit(mxs_auart_exit);
|
||
MODULE_LICENSE("GPL");
|
||
MODULE_DESCRIPTION("Freescale MXS application uart driver");
|
||
MODULE_ALIAS("platform:mxs-auart");
|