linux-stable/drivers/bus/Makefile
Linus Walleij 1c953bda90 bus: ixp4xx: Add a driver for IXP4xx expansion bus
The Intel IXP4xx SoCs have an expansion bus that is usually just
used for flash memory and configured by the boot loaders and can
be accessed using the "simple-bus".

However some devices need more elaborate configuration and then we
need to provide a proper 3-unit address space indicating chip
select for each device and provide timing and similar information.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:06 +02:00

42 lines
1.3 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the bus drivers.
#
# Interconnect bus drivers for ARM platforms
obj-$(CONFIG_ARM_CCI) += arm-cci.o
obj-$(CONFIG_ARM_INTEGRATOR_LM) += arm-integrator-lm.o
obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
obj-$(CONFIG_MOXTET) += moxtet.o
# DPAA2 fsl-mc bus
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
obj-$(CONFIG_BT1_APB) += bt1-apb.o
obj-$(CONFIG_BT1_AXI) += bt1-axi.o
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
obj-$(CONFIG_INTEL_IXP4XX_EB) += intel-ixp4xx-eb.o
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
# Interconnect bus driver for OMAP SoCs.
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o
obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o
obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o
obj-$(CONFIG_TI_SYSC) += ti-sysc.o
obj-$(CONFIG_TS_NBUS) += ts-nbus.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o
# MHI
obj-$(CONFIG_MHI_BUS) += mhi/