linux-stable/arch/m68k/coldfire/m525x.c
Randy Dunlap 9f66861181 m68k/coldfire: change pll var. to clk_pll
DEFINE_CLK() makes the variable name be clk_xyz, so variable
'pll' should instead be 'clk_pll'.

In file included from ../arch/m68k/coldfire/m525x.c:12:
../arch/m68k/coldfire/m525x.c:29:30: error: 'pll' undeclared here (not in a function)
   29 |  CLKDEV_INIT(NULL, "pll.0", &pll),
      |                              ^~~
../include/linux/clkdev.h:30:10: note: in definition of macro 'CLKDEV_INIT'
   30 |   .clk = c, \
      |          ^
In file included from ../arch/m68k/coldfire/m525x.c:21:
../arch/m68k/include/asm/mcfclk.h:43:27: warning: 'clk_pll' defined but not used [-Wunused-variable]
   43 |         static struct clk clk_##clk_ref = { \
      |                           ^~~~
../arch/m68k/coldfire/m525x.c:25:1: note: in expansion of macro 'DEFINE_CLK'
   25 | DEFINE_CLK(pll, "pll.0", MCF_CLK);
      | ^~~~~~~~~~

Fixes: 63aadb7766 ("m68k: coldfire: use clkdev_lookup on most coldfire")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2021-07-26 08:41:38 +10:00

88 lines
2.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/***************************************************************************/
/*
* 525x.c -- platform support for ColdFire 525x based boards
*
* Copyright (C) 2012, Steven King <sfking@fdwdc.com>
*/
/***************************************************************************/
#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
static struct clk_lookup m525x_clk_lookup[] = {
CLKDEV_INIT(NULL, "pll.0", &clk_pll),
CLKDEV_INIT(NULL, "sys.0", &clk_sys),
CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
CLKDEV_INIT("imx1-i2c.1", NULL, &clk_sys),
};
/***************************************************************************/
static void __init m525x_qspi_init(void)
{
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
/* set the GPIO function for the qspi cs gpios */
/* FIXME: replace with pinmux/pinctl support */
u32 f = readl(MCFSIM2_GPIOFUNC);
f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
writel(f, MCFSIM2_GPIOFUNC);
/* QSPI irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
}
static void __init m525x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u32 r;
/* first I2C controller uses regular irq setup */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
/* second I2C controller is completely different */
r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
m525x_qspi_init();
m525x_i2c_init();
clkdev_add_table(m525x_clk_lookup, ARRAY_SIZE(m525x_clk_lookup));
}
/***************************************************************************/