mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 02:50:43 +00:00
![Guenter Roeck](/assets/img/avatar_default.png)
Hardware monitoring sysfs attributes are used and displayed by unrestricted userspace applications. Standard attributes therefore have to be world readable, since otherwise those userspace applications would either have to run as super-user or display an error. None of those makes sense. Clarify the expected scope of attribute access in the ABI document. Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1164 lines
26 KiB
ReStructuredText
1164 lines
26 KiB
ReStructuredText
Naming and data format standards for sysfs files
|
|
================================================
|
|
|
|
The libsensors library offers an interface to the raw sensors data
|
|
through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
|
|
completely chip-independent. It assumes that all the kernel drivers
|
|
implement the standard sysfs interface described in this document.
|
|
This makes adding or updating support for any given chip very easy, as
|
|
libsensors, and applications using it, do not need to be modified.
|
|
This is a major improvement compared to lm-sensors 2.
|
|
|
|
Note that motherboards vary widely in the connections to sensor chips.
|
|
There is no standard that ensures, for example, that the second
|
|
temperature sensor is connected to the CPU, or that the second fan is on
|
|
the CPU. Also, some values reported by the chips need some computation
|
|
before they make full sense. For example, most chips can only measure
|
|
voltages between 0 and +4V. Other voltages are scaled back into that
|
|
range using external resistors. Since the values of these resistors
|
|
can change from motherboard to motherboard, the conversions cannot be
|
|
hard coded into the driver and have to be done in user space.
|
|
|
|
For this reason, even if we aim at a chip-independent libsensors, it will
|
|
still require a configuration file (e.g. /etc/sensors.conf) for proper
|
|
values conversion, labeling of inputs and hiding of unused inputs.
|
|
|
|
An alternative method that some programs use is to access the sysfs
|
|
files directly. This document briefly describes the standards that the
|
|
drivers follow, so that an application program can scan for entries and
|
|
access this data in a simple and consistent way. That said, such programs
|
|
will have to implement conversion, labeling and hiding of inputs. For
|
|
this reason, it is still not recommended to bypass the library.
|
|
|
|
Each chip gets its own directory in the sysfs /sys/devices tree. To
|
|
find all sensor chips, it is easier to follow the device symlinks from
|
|
`/sys/class/hwmon/hwmon*`.
|
|
|
|
Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
|
|
in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
|
|
in the hwmon "class" device directory are also supported. Complex drivers
|
|
(e.g. drivers for multifunction chips) may want to use this possibility to
|
|
avoid namespace pollution. The only drawback will be that older versions of
|
|
libsensors won't support the driver in question.
|
|
|
|
All sysfs values are fixed point numbers.
|
|
|
|
There is only one value per file, unlike the older /proc specification.
|
|
The common scheme for files naming is: <type><number>_<item>. Usual
|
|
types for sensor chips are "in" (voltage), "temp" (temperature) and
|
|
"fan" (fan). Usual items are "input" (measured value), "max" (high
|
|
threshold, "min" (low threshold). Numbering usually starts from 1,
|
|
except for voltages which start from 0 (because most data sheets use
|
|
this). A number is always used for elements that can be present more
|
|
than once, even if there is a single element of the given type on the
|
|
specific chip. Other files do not refer to a specific element, so
|
|
they have a simple name, and no number.
|
|
|
|
Alarms are direct indications read from the chips. The drivers do NOT
|
|
make comparisons of readings to thresholds. This allows violations
|
|
between readings to be caught and alarmed. The exact definition of an
|
|
alarm (for example, whether a threshold must be met or must be exceeded
|
|
to cause an alarm) is chip-dependent.
|
|
|
|
When setting values of hwmon sysfs attributes, the string representation of
|
|
the desired value must be written, note that strings which are not a number
|
|
are interpreted as 0! For more on how written strings are interpreted see the
|
|
"sysfs attribute writes interpretation" section at the end of this file.
|
|
|
|
Attribute access
|
|
----------------
|
|
|
|
Hardware monitoring sysfs attributes are displayed by unrestricted userspace
|
|
applications. For this reason, all standard ABI attributes shall be world
|
|
readable. Writeable standard ABI attributes shall be writeable only for
|
|
privileged users.
|
|
|
|
-------------------------------------------------------------------------
|
|
|
|
======= ===========================================
|
|
`[0-*]` denotes any positive number starting from 0
|
|
`[1-*]` denotes any positive number starting from 1
|
|
RO read only value
|
|
WO write only value
|
|
RW read/write value
|
|
======= ===========================================
|
|
|
|
Read/write values may be read-only for some chips, depending on the
|
|
hardware implementation.
|
|
|
|
All entries (except name) are optional, and should only be created in a
|
|
given driver if the chip has the feature.
|
|
|
|
|
|
*****************
|
|
Global attributes
|
|
*****************
|
|
|
|
`name`
|
|
The chip name.
|
|
This should be a short, lowercase string, not containing
|
|
whitespace, dashes, or the wildcard character '*'.
|
|
This attribute represents the chip name. It is the only
|
|
mandatory attribute.
|
|
I2C devices get this attribute created automatically.
|
|
|
|
RO
|
|
|
|
`update_interval`
|
|
The interval at which the chip will update readings.
|
|
Unit: millisecond
|
|
|
|
RW
|
|
|
|
Some devices have a variable update rate or interval.
|
|
This attribute can be used to change it to the desired value.
|
|
|
|
|
|
********
|
|
Voltages
|
|
********
|
|
|
|
`in[0-*]_min`
|
|
Voltage min value.
|
|
|
|
Unit: millivolt
|
|
|
|
RW
|
|
|
|
`in[0-*]_lcrit`
|
|
Voltage critical min value.
|
|
|
|
Unit: millivolt
|
|
|
|
RW
|
|
|
|
If voltage drops to or below this limit, the system may
|
|
take drastic action such as power down or reset. At the very
|
|
least, it should report a fault.
|
|
|
|
`in[0-*]_max`
|
|
Voltage max value.
|
|
|
|
Unit: millivolt
|
|
|
|
RW
|
|
|
|
`in[0-*]_crit`
|
|
Voltage critical max value.
|
|
|
|
Unit: millivolt
|
|
|
|
RW
|
|
|
|
If voltage reaches or exceeds this limit, the system may
|
|
take drastic action such as power down or reset. At the very
|
|
least, it should report a fault.
|
|
|
|
`in[0-*]_input`
|
|
Voltage input value.
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
Voltage measured on the chip pin.
|
|
|
|
Actual voltage depends on the scaling resistors on the
|
|
motherboard, as recommended in the chip datasheet.
|
|
|
|
This varies by chip and by motherboard.
|
|
Because of this variation, values are generally NOT scaled
|
|
by the chip driver, and must be done by the application.
|
|
However, some drivers (notably lm87 and via686a)
|
|
do scale, because of internal resistors built into a chip.
|
|
These drivers will output the actual voltage. Rule of
|
|
thumb: drivers should report the voltage values at the
|
|
"pins" of the chip.
|
|
|
|
`in[0-*]_average`
|
|
Average voltage
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
`in[0-*]_lowest`
|
|
Historical minimum voltage
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
`in[0-*]_highest`
|
|
Historical maximum voltage
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
`in[0-*]_reset_history`
|
|
Reset inX_lowest and inX_highest
|
|
|
|
WO
|
|
|
|
`in_reset_history`
|
|
Reset inX_lowest and inX_highest for all sensors
|
|
|
|
WO
|
|
|
|
`in[0-*]_label`
|
|
Suggested voltage channel label.
|
|
|
|
Text string
|
|
|
|
Should only be created if the driver has hints about what
|
|
this voltage channel is being used for, and user-space
|
|
doesn't. In all other cases, the label is provided by
|
|
user-space.
|
|
|
|
RO
|
|
|
|
`in[0-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return -ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`cpu[0-*]_vid`
|
|
CPU core reference voltage.
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
Not always correct.
|
|
|
|
`vrm`
|
|
Voltage Regulator Module version number.
|
|
|
|
RW (but changing it should no more be necessary)
|
|
|
|
Originally the VRM standard version multiplied by 10, but now
|
|
an arbitrary number, as not all standards have a version
|
|
number.
|
|
|
|
Affects the way the driver calculates the CPU core reference
|
|
voltage from the vid pins.
|
|
|
|
`in[0-*]_rated_min`
|
|
Minimum rated voltage.
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
`in[0-*]_rated_max`
|
|
Maximum rated voltage.
|
|
|
|
Unit: millivolt
|
|
|
|
RO
|
|
|
|
Also see the Alarms section for status flags associated with voltages.
|
|
|
|
|
|
****
|
|
Fans
|
|
****
|
|
|
|
`fan[1-*]_min`
|
|
Fan minimum value
|
|
|
|
Unit: revolution/min (RPM)
|
|
|
|
RW
|
|
|
|
`fan[1-*]_max`
|
|
Fan maximum value
|
|
|
|
Unit: revolution/min (RPM)
|
|
|
|
Only rarely supported by the hardware.
|
|
RW
|
|
|
|
`fan[1-*]_input`
|
|
Fan input value.
|
|
|
|
Unit: revolution/min (RPM)
|
|
|
|
RO
|
|
|
|
`fan[1-*]_div`
|
|
Fan divisor.
|
|
|
|
Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128).
|
|
|
|
RW
|
|
|
|
Some chips only support values 1, 2, 4 and 8.
|
|
Note that this is actually an internal clock divisor, which
|
|
affects the measurable speed range, not the read value.
|
|
|
|
`fan[1-*]_pulses`
|
|
Number of tachometer pulses per fan revolution.
|
|
|
|
Integer value, typically between 1 and 4.
|
|
|
|
RW
|
|
|
|
This value is a characteristic of the fan connected to the
|
|
device's input, so it has to be set in accordance with the fan
|
|
model.
|
|
|
|
Should only be created if the chip has a register to configure
|
|
the number of pulses. In the absence of such a register (and
|
|
thus attribute) the value assumed by all devices is 2 pulses
|
|
per fan revolution.
|
|
|
|
`fan[1-*]_target`
|
|
Desired fan speed
|
|
|
|
Unit: revolution/min (RPM)
|
|
|
|
RW
|
|
|
|
Only makes sense if the chip supports closed-loop fan speed
|
|
control based on the measured fan speed.
|
|
|
|
`fan[1-*]_label`
|
|
Suggested fan channel label.
|
|
|
|
Text string
|
|
|
|
Should only be created if the driver has hints about what
|
|
this fan channel is being used for, and user-space doesn't.
|
|
In all other cases, the label is provided by user-space.
|
|
|
|
RO
|
|
|
|
`fan[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return -ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
Also see the Alarms section for status flags associated with fans.
|
|
|
|
|
|
***
|
|
PWM
|
|
***
|
|
|
|
`pwm[1-*]`
|
|
Pulse width modulation fan control.
|
|
|
|
Integer value in the range 0 to 255
|
|
|
|
RW
|
|
|
|
255 is max or 100%.
|
|
|
|
`pwm[1-*]_enable`
|
|
Fan speed control method:
|
|
|
|
- 0: no fan speed control (i.e. fan at full speed)
|
|
- 1: manual fan speed control enabled (using `pwm[1-*]`)
|
|
- 2+: automatic fan speed control enabled
|
|
|
|
Check individual chip documentation files for automatic mode
|
|
details.
|
|
|
|
RW
|
|
|
|
`pwm[1-*]_mode`
|
|
- 0: DC mode (direct current)
|
|
- 1: PWM mode (pulse-width modulation)
|
|
|
|
RW
|
|
|
|
`pwm[1-*]_freq`
|
|
Base PWM frequency in Hz.
|
|
|
|
Only possibly available when pwmN_mode is PWM, but not always
|
|
present even then.
|
|
|
|
RW
|
|
|
|
`pwm[1-*]_auto_channels_temp`
|
|
Select which temperature channels affect this PWM output in
|
|
auto mode.
|
|
|
|
Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc...
|
|
Which values are possible depend on the chip used.
|
|
|
|
RW
|
|
|
|
`pwm[1-*]_auto_point[1-*]_pwm` / `pwm[1-*]_auto_point[1-*]_temp` / `pwm[1-*]_auto_point[1-*]_temp_hyst`
|
|
Define the PWM vs temperature curve.
|
|
|
|
Number of trip points is chip-dependent. Use this for chips
|
|
which associate trip points to PWM output channels.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_auto_point[1-*]_pwm` / `temp[1-*]_auto_point[1-*]_temp` / `temp[1-*]_auto_point[1-*]_temp_hyst`
|
|
Define the PWM vs temperature curve.
|
|
|
|
Number of trip points is chip-dependent. Use this for chips
|
|
which associate trip points to temperature channels.
|
|
|
|
RW
|
|
|
|
There is a third case where trip points are associated to both PWM output
|
|
channels and temperature channels: the PWM values are associated to PWM
|
|
output channels while the temperature values are associated to temperature
|
|
channels. In that case, the result is determined by the mapping between
|
|
temperature inputs and PWM outputs. When several temperature inputs are
|
|
mapped to a given PWM output, this leads to several candidate PWM values.
|
|
The actual result is up to the chip, but in general the highest candidate
|
|
value (fastest fan speed) wins.
|
|
|
|
|
|
************
|
|
Temperatures
|
|
************
|
|
|
|
`temp[1-*]_type`
|
|
Sensor type selection.
|
|
|
|
Integers 1 to 6
|
|
|
|
RW
|
|
|
|
- 1: CPU embedded diode
|
|
- 2: 3904 transistor
|
|
- 3: thermal diode
|
|
- 4: thermistor
|
|
- 5: AMD AMDSI
|
|
- 6: Intel PECI
|
|
|
|
Not all types are supported by all chips
|
|
|
|
`temp[1-*]_max`
|
|
Temperature max value.
|
|
|
|
Unit: millidegree Celsius (or millivolt, see below)
|
|
|
|
RW
|
|
|
|
`temp[1-*]_min`
|
|
Temperature min value.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RW
|
|
|
|
`temp[1-*]_max_hyst`
|
|
Temperature hysteresis value for max limit.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
Must be reported as an absolute temperature, NOT a delta
|
|
from the max value.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_min_hyst`
|
|
Temperature hysteresis value for min limit.
|
|
Unit: millidegree Celsius
|
|
|
|
Must be reported as an absolute temperature, NOT a delta
|
|
from the min value.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_input`
|
|
Temperature input value.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RO
|
|
|
|
`temp[1-*]_crit`
|
|
Temperature critical max value, typically greater than
|
|
corresponding temp_max values.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RW
|
|
|
|
`temp[1-*]_crit_hyst`
|
|
Temperature hysteresis value for critical limit.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
Must be reported as an absolute temperature, NOT a delta
|
|
from the critical value.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_emergency`
|
|
Temperature emergency max value, for chips supporting more than
|
|
two upper temperature limits. Must be equal or greater than
|
|
corresponding temp_crit values.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RW
|
|
|
|
`temp[1-*]_emergency_hyst`
|
|
Temperature hysteresis value for emergency limit.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
Must be reported as an absolute temperature, NOT a delta
|
|
from the emergency value.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_lcrit`
|
|
Temperature critical min value, typically lower than
|
|
corresponding temp_min values.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RW
|
|
|
|
`temp[1-*]_lcrit_hyst`
|
|
Temperature hysteresis value for critical min limit.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
Must be reported as an absolute temperature, NOT a delta
|
|
from the critical min value.
|
|
|
|
RW
|
|
|
|
`temp[1-*]_offset`
|
|
Temperature offset which is added to the temperature reading
|
|
by the chip.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
Read/Write value.
|
|
|
|
`temp[1-*]_label`
|
|
Suggested temperature channel label.
|
|
|
|
Text string
|
|
|
|
Should only be created if the driver has hints about what
|
|
this temperature channel is being used for, and user-space
|
|
doesn't. In all other cases, the label is provided by
|
|
user-space.
|
|
|
|
RO
|
|
|
|
`temp[1-*]_lowest`
|
|
Historical minimum temperature
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RO
|
|
|
|
`temp[1-*]_highest`
|
|
Historical maximum temperature
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RO
|
|
|
|
`temp[1-*]_reset_history`
|
|
Reset temp_lowest and temp_highest
|
|
|
|
WO
|
|
|
|
`temp_reset_history`
|
|
Reset temp_lowest and temp_highest for all sensors
|
|
|
|
WO
|
|
|
|
`temp[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return -ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`temp[1-*]_rated_min`
|
|
Minimum rated temperature.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RO
|
|
|
|
`temp[1-*]_rated_max`
|
|
Maximum rated temperature.
|
|
|
|
Unit: millidegree Celsius
|
|
|
|
RO
|
|
|
|
Some chips measure temperature using external thermistors and an ADC, and
|
|
report the temperature measurement as a voltage. Converting this voltage
|
|
back to a temperature (or the other way around for limits) requires
|
|
mathematical functions not available in the kernel, so the conversion
|
|
must occur in user space. For these chips, all temp* files described
|
|
above should contain values expressed in millivolt instead of millidegree
|
|
Celsius. In other words, such temperature channels are handled as voltage
|
|
channels by the driver.
|
|
|
|
Also see the Alarms section for status flags associated with temperatures.
|
|
|
|
|
|
********
|
|
Currents
|
|
********
|
|
|
|
`curr[1-*]_max`
|
|
Current max value
|
|
|
|
Unit: milliampere
|
|
|
|
RW
|
|
|
|
`curr[1-*]_min`
|
|
Current min value.
|
|
|
|
Unit: milliampere
|
|
|
|
RW
|
|
|
|
`curr[1-*]_lcrit`
|
|
Current critical low value
|
|
|
|
Unit: milliampere
|
|
|
|
RW
|
|
|
|
`curr[1-*]_crit`
|
|
Current critical high value.
|
|
|
|
Unit: milliampere
|
|
|
|
RW
|
|
|
|
`curr[1-*]_input`
|
|
Current input value
|
|
|
|
Unit: milliampere
|
|
|
|
RO
|
|
|
|
`curr[1-*]_average`
|
|
Average current use
|
|
|
|
Unit: milliampere
|
|
|
|
RO
|
|
|
|
`curr[1-*]_lowest`
|
|
Historical minimum current
|
|
|
|
Unit: milliampere
|
|
|
|
RO
|
|
|
|
`curr[1-*]_highest`
|
|
Historical maximum current
|
|
Unit: milliampere
|
|
RO
|
|
|
|
`curr[1-*]_reset_history`
|
|
Reset currX_lowest and currX_highest
|
|
|
|
WO
|
|
|
|
`curr_reset_history`
|
|
Reset currX_lowest and currX_highest for all sensors
|
|
|
|
WO
|
|
|
|
`curr[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return -ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`curr[1-*]_rated_min`
|
|
Minimum rated current.
|
|
|
|
Unit: milliampere
|
|
|
|
RO
|
|
|
|
`curr[1-*]_rated_max`
|
|
Maximum rated current.
|
|
|
|
Unit: milliampere
|
|
|
|
RO
|
|
|
|
Also see the Alarms section for status flags associated with currents.
|
|
|
|
*****
|
|
Power
|
|
*****
|
|
|
|
`power[1-*]_average`
|
|
Average power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_average_interval`
|
|
Power use averaging interval. A poll
|
|
notification is sent to this file if the
|
|
hardware changes the averaging interval.
|
|
|
|
Unit: milliseconds
|
|
|
|
RW
|
|
|
|
`power[1-*]_average_interval_max`
|
|
Maximum power use averaging interval
|
|
|
|
Unit: milliseconds
|
|
|
|
RO
|
|
|
|
`power[1-*]_average_interval_min`
|
|
Minimum power use averaging interval
|
|
|
|
Unit: milliseconds
|
|
|
|
RO
|
|
|
|
`power[1-*]_average_highest`
|
|
Historical average maximum power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_average_lowest`
|
|
Historical average minimum power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_average_max`
|
|
A poll notification is sent to
|
|
`power[1-*]_average` when power use
|
|
rises above this value.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_average_min`
|
|
A poll notification is sent to
|
|
`power[1-*]_average` when power use
|
|
sinks below this value.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_input`
|
|
Instantaneous power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_input_highest`
|
|
Historical maximum power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_input_lowest`
|
|
Historical minimum power use
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_reset_history`
|
|
Reset input_highest, input_lowest,
|
|
average_highest and average_lowest.
|
|
|
|
WO
|
|
|
|
`power[1-*]_accuracy`
|
|
Accuracy of the power meter.
|
|
|
|
Unit: Percent
|
|
|
|
RO
|
|
|
|
`power[1-*]_cap`
|
|
If power use rises above this limit, the
|
|
system should take action to reduce power use.
|
|
A poll notification is sent to this file if the
|
|
cap is changed by the hardware. The `*_cap`
|
|
files only appear if the cap is known to be
|
|
enforced by hardware.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_cap_hyst`
|
|
Margin of hysteresis built around capping and
|
|
notification.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_cap_max`
|
|
Maximum cap that can be set.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_cap_min`
|
|
Minimum cap that can be set.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_max`
|
|
Maximum power.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_crit`
|
|
Critical maximum power.
|
|
|
|
If power rises to or above this limit, the
|
|
system is expected take drastic action to reduce
|
|
power consumption, such as a system shutdown or
|
|
a forced powerdown of some devices.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return
|
|
-ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`power[1-*]_rated_min`
|
|
Minimum rated power.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_rated_max`
|
|
Maximum rated power.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
Also see the Alarms section for status flags associated with power readings.
|
|
|
|
******
|
|
Energy
|
|
******
|
|
|
|
`energy[1-*]_input`
|
|
Cumulative energy use
|
|
|
|
Unit: microJoule
|
|
|
|
RO
|
|
|
|
`energy[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return
|
|
-ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
********
|
|
Humidity
|
|
********
|
|
|
|
`humidity[1-*]_input`
|
|
Humidity
|
|
|
|
Unit: milli-percent (per cent mille, pcm)
|
|
|
|
RO
|
|
|
|
|
|
`humidity[1-*]_enable`
|
|
Enable or disable the sensors
|
|
|
|
When disabled the sensor read will return
|
|
-ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`humidity[1-*]_rated_min`
|
|
Minimum rated humidity.
|
|
|
|
Unit: milli-percent (per cent mille, pcm)
|
|
|
|
RO
|
|
|
|
`humidity[1-*]_rated_max`
|
|
Maximum rated humidity.
|
|
|
|
Unit: milli-percent (per cent mille, pcm)
|
|
|
|
RO
|
|
|
|
******
|
|
Alarms
|
|
******
|
|
|
|
Each channel or limit may have an associated alarm file, containing a
|
|
boolean value. 1 means than an alarm condition exists, 0 means no alarm.
|
|
|
|
Usually a given chip will either use channel-related alarms, or
|
|
limit-related alarms, not both. The driver should just reflect the hardware
|
|
implementation.
|
|
|
|
+-------------------------------+-----------------------+
|
|
| **`in[0-*]_alarm`, | Channel alarm |
|
|
| `curr[1-*]_alarm`, | |
|
|
| `power[1-*]_alarm`, | - 0: no alarm |
|
|
| `fan[1-*]_alarm`, | - 1: alarm |
|
|
| `temp[1-*]_alarm`** | |
|
|
| | RO |
|
|
+-------------------------------+-----------------------+
|
|
|
|
**OR**
|
|
|
|
+-------------------------------+-----------------------+
|
|
| **`in[0-*]_min_alarm`, | Limit alarm |
|
|
| `in[0-*]_max_alarm`, | |
|
|
| `in[0-*]_lcrit_alarm`, | - 0: no alarm |
|
|
| `in[0-*]_crit_alarm`, | - 1: alarm |
|
|
| `curr[1-*]_min_alarm`, | |
|
|
| `curr[1-*]_max_alarm`, | RO |
|
|
| `curr[1-*]_lcrit_alarm`, | |
|
|
| `curr[1-*]_crit_alarm`, | |
|
|
| `power[1-*]_cap_alarm`, | |
|
|
| `power[1-*]_max_alarm`, | |
|
|
| `power[1-*]_crit_alarm`, | |
|
|
| `fan[1-*]_min_alarm`, | |
|
|
| `fan[1-*]_max_alarm`, | |
|
|
| `temp[1-*]_min_alarm`, | |
|
|
| `temp[1-*]_max_alarm`, | |
|
|
| `temp[1-*]_lcrit_alarm`, | |
|
|
| `temp[1-*]_crit_alarm`, | |
|
|
| `temp[1-*]_emergency_alarm`** | |
|
|
+-------------------------------+-----------------------+
|
|
|
|
Each input channel may have an associated fault file. This can be used
|
|
to notify open diodes, unconnected fans etc. where the hardware
|
|
supports it. When this boolean has value 1, the measurement for that
|
|
channel should not be trusted.
|
|
|
|
`fan[1-*]_fault` / `temp[1-*]_fault`
|
|
Input fault condition
|
|
|
|
- 0: no fault occurred
|
|
- 1: fault condition
|
|
|
|
RO
|
|
|
|
Some chips also offer the possibility to get beeped when an alarm occurs:
|
|
|
|
`beep_enable`
|
|
Master beep enable
|
|
|
|
- 0: no beeps
|
|
- 1: beeps
|
|
|
|
RW
|
|
|
|
`in[0-*]_beep`, `curr[1-*]_beep`, `fan[1-*]_beep`, `temp[1-*]_beep`,
|
|
Channel beep
|
|
|
|
- 0: disable
|
|
- 1: enable
|
|
|
|
RW
|
|
|
|
In theory, a chip could provide per-limit beep masking, but no such chip
|
|
was seen so far.
|
|
|
|
Old drivers provided a different, non-standard interface to alarms and
|
|
beeps. These interface files are deprecated, but will be kept around
|
|
for compatibility reasons:
|
|
|
|
`alarms`
|
|
Alarm bitmask.
|
|
|
|
RO
|
|
|
|
Integer representation of one to four bytes.
|
|
|
|
A '1' bit means an alarm.
|
|
|
|
Chips should be programmed for 'comparator' mode so that
|
|
the alarm will 'come back' after you read the register
|
|
if it is still valid.
|
|
|
|
Generally a direct representation of a chip's internal
|
|
alarm registers; there is no standard for the position
|
|
of individual bits. For this reason, the use of this
|
|
interface file for new drivers is discouraged. Use
|
|
`individual *_alarm` and `*_fault` files instead.
|
|
Bits are defined in kernel/include/sensors.h.
|
|
|
|
`beep_mask`
|
|
Bitmask for beep.
|
|
Same format as 'alarms' with the same bit locations,
|
|
use discouraged for the same reason. Use individual
|
|
`*_beep` files instead.
|
|
RW
|
|
|
|
|
|
*******************
|
|
Intrusion detection
|
|
*******************
|
|
|
|
`intrusion[0-*]_alarm`
|
|
Chassis intrusion detection
|
|
|
|
- 0: OK
|
|
- 1: intrusion detected
|
|
|
|
RW
|
|
|
|
Contrary to regular alarm flags which clear themselves
|
|
automatically when read, this one sticks until cleared by
|
|
the user. This is done by writing 0 to the file. Writing
|
|
other values is unsupported.
|
|
|
|
`intrusion[0-*]_beep`
|
|
Chassis intrusion beep
|
|
|
|
0: disable
|
|
1: enable
|
|
|
|
RW
|
|
|
|
****************************
|
|
Average sample configuration
|
|
****************************
|
|
|
|
Devices allowing for reading {in,power,curr,temp}_average values may export
|
|
attributes for controlling number of samples used to compute average.
|
|
|
|
+--------------+---------------------------------------------------------------+
|
|
| samples | Sets number of average samples for all types of measurements. |
|
|
| | |
|
|
| | RW |
|
|
+--------------+---------------------------------------------------------------+
|
|
| in_samples | Sets number of average samples for specific type of |
|
|
| power_samples| measurements. |
|
|
| curr_samples | |
|
|
| temp_samples | Note that on some devices it won't be possible to set all of |
|
|
| | them to different values so changing one might also change |
|
|
| | some others. |
|
|
| | |
|
|
| | RW |
|
|
+--------------+---------------------------------------------------------------+
|
|
|
|
sysfs attribute writes interpretation
|
|
-------------------------------------
|
|
|
|
hwmon sysfs attributes always contain numbers, so the first thing to do is to
|
|
convert the input to a number, there are 2 ways todo this depending whether
|
|
the number can be negative or not::
|
|
|
|
unsigned long u = simple_strtoul(buf, NULL, 10);
|
|
long s = simple_strtol(buf, NULL, 10);
|
|
|
|
With buf being the buffer with the user input being passed by the kernel.
|
|
Notice that we do not use the second argument of strto[u]l, and thus cannot
|
|
tell when 0 is returned, if this was really 0 or is caused by invalid input.
|
|
This is done deliberately as checking this everywhere would add a lot of
|
|
code to the kernel.
|
|
|
|
Notice that it is important to always store the converted value in an
|
|
unsigned long or long, so that no wrap around can happen before any further
|
|
checking.
|
|
|
|
After the input string is converted to an (unsigned) long, the value should be
|
|
checked if its acceptable. Be careful with further conversions on the value
|
|
before checking it for validity, as these conversions could still cause a wrap
|
|
around before the check. For example do not multiply the result, and only
|
|
add/subtract if it has been divided before the add/subtract.
|
|
|
|
What to do if a value is found to be invalid, depends on the type of the
|
|
sysfs attribute that is being set. If it is a continuous setting like a
|
|
tempX_max or inX_max attribute, then the value should be clamped to its
|
|
limits using clamp_val(value, min_limit, max_limit). If it is not continuous
|
|
like for example a tempX_type, then when an invalid value is written,
|
|
-EINVAL should be returned.
|
|
|
|
Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees)::
|
|
|
|
long v = simple_strtol(buf, NULL, 10) / 1000;
|
|
v = clamp_val(v, -128, 127);
|
|
/* write v to register */
|
|
|
|
Example2, fan divider setting, valid values 2, 4 and 8::
|
|
|
|
unsigned long v = simple_strtoul(buf, NULL, 10);
|
|
|
|
switch (v) {
|
|
case 2: v = 1; break;
|
|
case 4: v = 2; break;
|
|
case 8: v = 3; break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* write v to register */
|