mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
eef58fdd01
<generated/ti-emif-asm-offsets.h> is only generated and included by drivers/memory/, so it does not need to reside in the globally visible include/generated/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
375 lines
11 KiB
ArmAsm
375 lines
11 KiB
ArmAsm
/*
|
|
* Low level PM code for TI EMIF
|
|
*
|
|
* Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Dave Gerlach
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/memory.h>
|
|
|
|
#include "emif.h"
|
|
#include "ti-emif-asm-offsets.h"
|
|
|
|
#define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES 0x00a0
|
|
#define EMIF_POWER_MGMT_SR_TIMER_MASK 0x00f0
|
|
#define EMIF_POWER_MGMT_SELF_REFRESH_MODE 0x0200
|
|
#define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK 0x0700
|
|
|
|
#define EMIF_SDCFG_TYPE_DDR2 0x2 << SDRAM_TYPE_SHIFT
|
|
#define EMIF_SDCFG_TYPE_DDR3 0x3 << SDRAM_TYPE_SHIFT
|
|
#define EMIF_STATUS_READY 0x4
|
|
|
|
#define AM43XX_EMIF_PHY_CTRL_REG_COUNT 0x120
|
|
|
|
#define EMIF_AM437X_REGISTERS 0x1
|
|
|
|
.arm
|
|
.align 3
|
|
|
|
ENTRY(ti_emif_sram)
|
|
|
|
/*
|
|
* void ti_emif_save_context(void)
|
|
*
|
|
* Used during suspend to save the context of all required EMIF registers
|
|
* to local memory if the EMIF is going to lose context during the sleep
|
|
* transition. Operates on the VIRTUAL address of the EMIF.
|
|
*/
|
|
ENTRY(ti_emif_save_context)
|
|
stmfd sp!, {r4 - r11, lr} @ save registers on stack
|
|
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
|
|
ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
|
|
|
|
/* Save EMIF configuration */
|
|
ldr r1, [r0, #EMIF_SDRAM_CONFIG]
|
|
str r1, [r2, #EMIF_SDCFG_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL]
|
|
str r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_SDRAM_TIMING_1]
|
|
str r1, [r2, #EMIF_TIMING1_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_SDRAM_TIMING_2]
|
|
str r1, [r2, #EMIF_TIMING2_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_SDRAM_TIMING_3]
|
|
str r1, [r2, #EMIF_TIMING3_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
str r1, [r2, #EMIF_PMCR_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW]
|
|
str r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
|
|
str r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_DDR_PHY_CTRL_1]
|
|
str r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_COS_CONFIG]
|
|
str r1, [r2, #EMIF_COS_CONFIG_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING]
|
|
str r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING]
|
|
str r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING]
|
|
str r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_OCP_CONFIG]
|
|
str r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET]
|
|
|
|
ldr r5, [r4, #EMIF_PM_CONFIG_OFFSET]
|
|
cmp r5, #EMIF_SRAM_AM43_REG_LAYOUT
|
|
bne emif_skip_save_extra_regs
|
|
|
|
ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL]
|
|
str r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD]
|
|
str r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_LPDDR2_NVM_TIMING]
|
|
str r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW]
|
|
str r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_DLL_CALIB_CTRL]
|
|
str r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW]
|
|
str r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET]
|
|
|
|
/* Loop and save entire block of emif phy regs */
|
|
mov r5, #0x0
|
|
add r4, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET
|
|
add r3, r0, #EMIF_EXT_PHY_CTRL_1
|
|
ddr_phy_ctrl_save:
|
|
ldr r1, [r3, r5]
|
|
str r1, [r4, r5]
|
|
add r5, r5, #0x4
|
|
cmp r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT
|
|
bne ddr_phy_ctrl_save
|
|
|
|
emif_skip_save_extra_regs:
|
|
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
|
|
ENDPROC(ti_emif_save_context)
|
|
|
|
/*
|
|
* void ti_emif_restore_context(void)
|
|
*
|
|
* Used during resume to restore the context of all required EMIF registers
|
|
* from local memory after the EMIF has lost context during a sleep transition.
|
|
* Operates on the PHYSICAL address of the EMIF.
|
|
*/
|
|
ENTRY(ti_emif_restore_context)
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
|
|
ldr r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET]
|
|
|
|
/* Config EMIF Timings */
|
|
ldr r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET]
|
|
str r1, [r0, #EMIF_DDR_PHY_CTRL_1]
|
|
str r1, [r0, #EMIF_DDR_PHY_CTRL_1_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_TIMING1_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_1]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_1_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_TIMING2_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_2]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_2_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_TIMING3_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_3]
|
|
str r1, [r0, #EMIF_SDRAM_TIMING_3_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL]
|
|
str r1, [r0, #EMIF_SDRAM_REFRESH_CTRL_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
|
|
ldr r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_COS_CONFIG_OFFSET]
|
|
str r1, [r0, #EMIF_COS_CONFIG]
|
|
|
|
ldr r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET]
|
|
str r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING]
|
|
|
|
ldr r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET]
|
|
str r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING]
|
|
|
|
ldr r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET]
|
|
str r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING]
|
|
|
|
ldr r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_OCP_CONFIG]
|
|
|
|
ldr r5, [r4, #EMIF_PM_CONFIG_OFFSET]
|
|
cmp r5, #EMIF_SRAM_AM43_REG_LAYOUT
|
|
bne emif_skip_restore_extra_regs
|
|
|
|
ldr r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET]
|
|
str r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL]
|
|
|
|
ldr r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET]
|
|
str r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD]
|
|
|
|
ldr r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET]
|
|
str r1, [r0, #EMIF_LPDDR2_NVM_TIMING]
|
|
|
|
ldr r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET]
|
|
str r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_DLL_CALIB_CTRL]
|
|
|
|
ldr r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET]
|
|
str r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW]
|
|
|
|
ldr r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
|
|
|
|
/* Loop and restore entire block of emif phy regs */
|
|
mov r5, #0x0
|
|
/* Load ti_emif_regs_amx3 + EMIF_EXT_PHY_CTRL_VALS_OFFSET for address
|
|
* to phy register save space
|
|
*/
|
|
add r3, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET
|
|
add r4, r0, #EMIF_EXT_PHY_CTRL_1
|
|
ddr_phy_ctrl_restore:
|
|
ldr r1, [r3, r5]
|
|
str r1, [r4, r5]
|
|
add r5, r5, #0x4
|
|
cmp r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT
|
|
bne ddr_phy_ctrl_restore
|
|
|
|
emif_skip_restore_extra_regs:
|
|
/*
|
|
* Output impedence calib needed only for DDR3
|
|
* but since the initial state of this will be
|
|
* disabled for DDR2 no harm in restoring the
|
|
* old configuration
|
|
*/
|
|
ldr r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
|
|
str r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
|
|
|
|
/* Write to sdcfg last for DDR2 only */
|
|
ldr r1, [r2, #EMIF_SDCFG_VAL_OFFSET]
|
|
and r2, r1, #SDRAM_TYPE_MASK
|
|
cmp r2, #EMIF_SDCFG_TYPE_DDR2
|
|
streq r1, [r0, #EMIF_SDRAM_CONFIG]
|
|
|
|
mov pc, lr
|
|
ENDPROC(ti_emif_restore_context)
|
|
|
|
/*
|
|
* void ti_emif_run_hw_leveling(void)
|
|
*
|
|
* Used during resume to run hardware leveling again and restore the
|
|
* configuration of the EMIF PHY, only for DDR3.
|
|
*/
|
|
ENTRY(ti_emif_run_hw_leveling)
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
|
|
|
|
ldr r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
|
|
orr r3, r3, #RDWRLVLFULL_START
|
|
ldr r2, [r0, #EMIF_SDRAM_CONFIG]
|
|
and r2, r2, #SDRAM_TYPE_MASK
|
|
cmp r2, #EMIF_SDCFG_TYPE_DDR3
|
|
bne skip_hwlvl
|
|
|
|
str r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
|
|
|
|
/*
|
|
* If EMIF registers are touched during initial stage of HW
|
|
* leveling sequence there will be an L3 NOC timeout error issued
|
|
* as the EMIF will not respond, which is not fatal, but it is
|
|
* avoidable. This small wait loop is enough time for this condition
|
|
* to clear, even at worst case of CPU running at max speed of 1Ghz.
|
|
*/
|
|
mov r2, #0x2000
|
|
1:
|
|
subs r2, r2, #0x1
|
|
bne 1b
|
|
|
|
/* Bit clears when operation is complete */
|
|
2: ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
|
|
tst r1, #RDWRLVLFULL_START
|
|
bne 2b
|
|
|
|
skip_hwlvl:
|
|
mov pc, lr
|
|
ENDPROC(ti_emif_run_hw_leveling)
|
|
|
|
/*
|
|
* void ti_emif_enter_sr(void)
|
|
*
|
|
* Programs the EMIF to tell the SDRAM to enter into self-refresh
|
|
* mode during a sleep transition. Operates on the VIRTUAL address
|
|
* of the EMIF.
|
|
*/
|
|
ENTRY(ti_emif_enter_sr)
|
|
stmfd sp!, {r4 - r11, lr} @ save registers on stack
|
|
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
|
|
ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
|
|
|
|
ldr r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
|
|
orr r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
|
|
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
|
|
ENDPROC(ti_emif_enter_sr)
|
|
|
|
/*
|
|
* void ti_emif_exit_sr(void)
|
|
*
|
|
* Programs the EMIF to tell the SDRAM to exit self-refresh mode
|
|
* after a sleep transition. Operates on the PHYSICAL address of
|
|
* the EMIF.
|
|
*/
|
|
ENTRY(ti_emif_exit_sr)
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
|
|
ldr r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET]
|
|
|
|
/*
|
|
* Toggle EMIF to exit refresh mode:
|
|
* if EMIF lost context, PWR_MGT_CTRL is currently 0, writing disable
|
|
* (0x0), wont do diddly squat! so do a toggle from SR(0x2) to disable
|
|
* (0x0) here.
|
|
* *If* EMIF did not lose context, nothing broken as we write the same
|
|
* value(0x2) to reg before we write a disable (0x0).
|
|
*/
|
|
ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET]
|
|
bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
|
|
orr r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
|
|
/* Wait for EMIF to become ready */
|
|
1: ldr r1, [r0, #EMIF_STATUS]
|
|
tst r1, #EMIF_STATUS_READY
|
|
beq 1b
|
|
|
|
mov pc, lr
|
|
ENDPROC(ti_emif_exit_sr)
|
|
|
|
/*
|
|
* void ti_emif_abort_sr(void)
|
|
*
|
|
* Disables self-refresh after a failed transition to a low-power
|
|
* state so the kernel can jump back to DDR and follow abort path.
|
|
* Operates on the VIRTUAL address of the EMIF.
|
|
*/
|
|
ENTRY(ti_emif_abort_sr)
|
|
stmfd sp!, {r4 - r11, lr} @ save registers on stack
|
|
|
|
adr r4, ti_emif_pm_sram_data
|
|
ldr r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
|
|
ldr r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
|
|
|
|
ldr r1, [r2, #EMIF_PMCR_VAL_OFFSET]
|
|
bic r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
|
|
str r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
|
|
|
|
/* Wait for EMIF to become ready */
|
|
1: ldr r1, [r0, #EMIF_STATUS]
|
|
tst r1, #EMIF_STATUS_READY
|
|
beq 1b
|
|
|
|
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
|
|
ENDPROC(ti_emif_abort_sr)
|
|
|
|
.align 3
|
|
ENTRY(ti_emif_pm_sram_data)
|
|
.space EMIF_PM_DATA_SIZE
|
|
ENTRY(ti_emif_sram_sz)
|
|
.word . - ti_emif_save_context
|