linux-stable/arch/powerpc/sysdev/cpm_common.c
Christophe Leroy 4d486e0083 soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)
Commit 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
has changed the way muram is managed.
genalloc uses kmalloc(), hence requires the SLAB to be up and running.

On powerpc 8xx, cpm_reset() is called early during startup.
cpm_reset() then calls cpm_muram_init() before SLAB is available,
hence the following Oops.

cpm_reset() cannot be called during initcalls because the CPM is
needed for console.

This patch removes the call to cpm_muram_init() from cpm_reset().
cpm_muram_init() will be called from a new function called cpm_init()
which is declared as subsys_initcall, unless cpm_muram_alloc() is
called earlier for the serial console in which case cpm_muram_init()
will be called from there.

The reason for calling it from two places is that some drivers
(e.g. i2c-cpm) need some of the initialisations done by
cpm_muram_init() but don't call cpm_muram_alloc(). The console
driver calls cpm_muram_alloc() but some platforms might not use
the CPM serial ports for console.

[    0.000000] Unable to handle kernel paging request for data at address 0x00000008
[    0.000000] Faulting instruction address: 0xc01acce0
[    0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.000000] PREEMPT CMPC885
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5
[    0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000
[    0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000
[    0.000000] REGS: c0537e50 TRAP: 0300   Not tainted (4.4.14-s3k-dev-g0886ed8-svn)
[    0.000000] MSR: 00001032 <ME,IR,DR,RI>  CR: 28044428  XER: 00000000
[    0.000000] DAR: 00000008 DSISR: c0000000
GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff
GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8
GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000
GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001
[    0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc
[    0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c
[    0.000000] Call Trace:
[    0.000000] [c0537f00] [00000200] 0x200 (unreliable)
[    0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c
[    0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8
[    0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30
[    0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168
[    0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380
[    0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98
[    0.000000] Instruction dump:
[    0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6
[    0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f
[    0.000000] ---[ end trace dc8fa200cb88537f ]---

fixes: 0e6e01ff69 ("CPM/QE: use genalloc to manage CPM/QE muram")
Cc: stable@vger.linux.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: Removed some string changes unrelated to bugfix]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25 02:38:52 -05:00

217 lines
5.2 KiB
C

/*
* Common CPM code
*
* Author: Scott Wood <scottwood@freescale.com>
*
* Copyright 2007-2008,2010 Freescale Semiconductor, Inc.
*
* Some parts derived from commproc.c/cpm2_common.c, which is:
* Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
* Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
* Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/spinlock.h>
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <asm/udbg.h>
#include <asm/io.h>
#include <asm/cpm.h>
#include <asm/fixmap.h>
#include <soc/fsl/qe/qe.h>
#include <mm/mmu_decl.h>
#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
#include <linux/of_gpio.h>
#endif
static int __init cpm_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
if (!np)
np = of_find_compatible_node(NULL, NULL, "fsl,cpm2");
if (!np)
return -ENODEV;
cpm_muram_init();
of_node_put(np);
return 0;
}
subsys_initcall(cpm_init);
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
static u32 __iomem *cpm_udbg_txdesc;
static u8 __iomem *cpm_udbg_txbuf;
static void udbg_putc_cpm(char c)
{
if (c == '\n')
udbg_putc_cpm('\r');
while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
;
out_8(cpm_udbg_txbuf, c);
out_be32(&cpm_udbg_txdesc[0], 0xa0000001);
}
void __init udbg_init_cpm(void)
{
#ifdef CONFIG_PPC_8xx
cpm_udbg_txdesc = (u32 __iomem __force *)
(CONFIG_PPC_EARLY_DEBUG_CPM_ADDR - PHYS_IMMR_BASE +
VIRT_IMMR_BASE);
cpm_udbg_txbuf = (u8 __iomem __force *)
(in_be32(&cpm_udbg_txdesc[1]) - PHYS_IMMR_BASE +
VIRT_IMMR_BASE);
#else
cpm_udbg_txdesc = (u32 __iomem __force *)
CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
cpm_udbg_txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
#endif
if (cpm_udbg_txdesc) {
#ifdef CONFIG_CPM2
setbat(1, 0xf0000000, 0xf0000000, 1024*1024, PAGE_KERNEL_NCG);
#endif
udbg_putc = udbg_putc_cpm;
}
}
#endif
#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
struct cpm2_ioports {
u32 dir, par, sor, odr, dat;
u32 res[3];
};
struct cpm2_gpio32_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
/* shadowed data register to clear/set bits safely */
u32 cpdata;
};
static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct cpm2_gpio32_chip *cpm2_gc =
container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
struct cpm2_ioports __iomem *iop = mm_gc->regs;
cpm2_gc->cpdata = in_be32(&iop->dat);
}
static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm2_ioports __iomem *iop = mm_gc->regs;
u32 pin_mask;
pin_mask = 1 << (31 - gpio);
return !!(in_be32(&iop->dat) & pin_mask);
}
static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
int value)
{
struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(&mm_gc->gc);
struct cpm2_ioports __iomem *iop = mm_gc->regs;
if (value)
cpm2_gc->cpdata |= pin_mask;
else
cpm2_gc->cpdata &= ~pin_mask;
out_be32(&iop->dat, cpm2_gc->cpdata);
}
static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm2_gc->lock, flags);
__cpm2_gpio32_set(mm_gc, pin_mask, value);
spin_unlock_irqrestore(&cpm2_gc->lock, flags);
}
static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
struct cpm2_ioports __iomem *iop = mm_gc->regs;
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm2_gc->lock, flags);
setbits32(&iop->dir, pin_mask);
__cpm2_gpio32_set(mm_gc, pin_mask, val);
spin_unlock_irqrestore(&cpm2_gc->lock, flags);
return 0;
}
static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
struct cpm2_ioports __iomem *iop = mm_gc->regs;
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm2_gc->lock, flags);
clrbits32(&iop->dir, pin_mask);
spin_unlock_irqrestore(&cpm2_gc->lock, flags);
return 0;
}
int cpm2_gpiochip_add32(struct device_node *np)
{
struct cpm2_gpio32_chip *cpm2_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
if (!cpm2_gc)
return -ENOMEM;
spin_lock_init(&cpm2_gc->lock);
mm_gc = &cpm2_gc->mm_gc;
gc = &mm_gc->gc;
mm_gc->save_regs = cpm2_gpio32_save_regs;
gc->ngpio = 32;
gc->direction_input = cpm2_gpio32_dir_in;
gc->direction_output = cpm2_gpio32_dir_out;
gc->get = cpm2_gpio32_get;
gc->set = cpm2_gpio32_set;
return of_mm_gpiochip_add_data(np, mm_gc, cpm2_gc);
}
#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */