mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 17:08:10 +00:00
Code Issues Releases Wiki Activity
linux-stable/include/linux/tty.h
Linus Torvalds e10abc629f TTY and Serial driver update for 4.7-rc1 
Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...
2016-05-20 20:57:27 -07:00

737 lines
25 KiB
C
Raw Blame History

#ifndef _LINUX_TTY_H
#define _LINUX_TTY_H
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
#include <linux/tty_flags.h>
#include <uapi/linux/tty.h>
#include <linux/rwsem.h>
#include <linux/llist.h>
/*
* Lock subclasses for tty locks
*
* TTY_LOCK_NORMAL is for normal ttys and master ptys.
* TTY_LOCK_SLAVE is for slave ptys only.
*
* Lock subclasses are necessary for handling nested locking with pty pairs.
* tty locks which use nested locking:
*
* legacy_mutex - Nested tty locks are necessary for releasing pty pairs.
* The stable lock order is master pty first, then slave pty.
* termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem.
* Subclassing this lock enables the slave pty to hold its
* termios_rwsem when claiming the master tty_buffer lock.
* tty_buffer lock - slave ptys can claim nested buffer lock when handling
* signal chars. The stable lock order is slave pty, then
* master.
*/
enum {
TTY_LOCK_NORMAL = 0,
TTY_LOCK_SLAVE,
};
/*
* (Note: the *_driver.minor_start values 1, 64, 128, 192 are
* hardcoded at present.)
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_RESERVE 1024 /* Default reserve for main devpts */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
* isn't in use (eg VINTR has no character etc)
*/
#define __DISABLED_CHAR '\0'
struct tty_buffer {
union {
struct tty_buffer *next;
struct llist_node free;
};
int used;
int size;
int commit;
int read;
int flags;
/* Data points here */
unsigned long data[0];
};
/* Values for .flags field of tty_buffer */
#define TTYB_NORMAL 1 /* buffer has no flags buffer */
static inline unsigned char *char_buf_ptr(struct tty_buffer *b, int ofs)
{
return ((unsigned char *)b->data) + ofs;
}
static inline char *flag_buf_ptr(struct tty_buffer *b, int ofs)
{
return (char *)char_buf_ptr(b, ofs) + b->size;
}
struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex lock;
atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
atomic_t mem_used; /* In-use buffers excluding free list */
int mem_limit;
struct tty_buffer *tail; /* Active buffer */
};
/*
* When a break, frame error, or parity error happens, these codes are
* stuffed into the flags buffer.
*/
#define TTY_NORMAL 0
#define TTY_BREAK 1
#define TTY_FRAME 2
#define TTY_PARITY 3
#define TTY_OVERRUN 4
#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
#define I_IGNPAR(tty) _I_FLAG((tty), IGNPAR)
#define I_PARMRK(tty) _I_FLAG((tty), PARMRK)
#define I_INPCK(tty) _I_FLAG((tty), INPCK)
#define I_ISTRIP(tty) _I_FLAG((tty), ISTRIP)
#define I_INLCR(tty) _I_FLAG((tty), INLCR)
#define I_IGNCR(tty) _I_FLAG((tty), IGNCR)
#define I_ICRNL(tty) _I_FLAG((tty), ICRNL)
#define I_IUCLC(tty) _I_FLAG((tty), IUCLC)
#define I_IXON(tty) _I_FLAG((tty), IXON)
#define I_IXANY(tty) _I_FLAG((tty), IXANY)
#define I_IXOFF(tty) _I_FLAG((tty), IXOFF)
#define I_IMAXBEL(tty) _I_FLAG((tty), IMAXBEL)
#define I_IUTF8(tty) _I_FLAG((tty), IUTF8)
#define O_OPOST(tty) _O_FLAG((tty), OPOST)
#define O_OLCUC(tty) _O_FLAG((tty), OLCUC)
#define O_ONLCR(tty) _O_FLAG((tty), ONLCR)
#define O_OCRNL(tty) _O_FLAG((tty), OCRNL)
#define O_ONOCR(tty) _O_FLAG((tty), ONOCR)
#define O_ONLRET(tty) _O_FLAG((tty), ONLRET)
#define O_OFILL(tty) _O_FLAG((tty), OFILL)
#define O_OFDEL(tty) _O_FLAG((tty), OFDEL)
#define O_NLDLY(tty) _O_FLAG((tty), NLDLY)
#define O_CRDLY(tty) _O_FLAG((tty), CRDLY)
#define O_TABDLY(tty) _O_FLAG((tty), TABDLY)
#define O_BSDLY(tty) _O_FLAG((tty), BSDLY)
#define O_VTDLY(tty) _O_FLAG((tty), VTDLY)
#define O_FFDLY(tty) _O_FLAG((tty), FFDLY)
#define C_BAUD(tty) _C_FLAG((tty), CBAUD)
#define C_CSIZE(tty) _C_FLAG((tty), CSIZE)
#define C_CSTOPB(tty) _C_FLAG((tty), CSTOPB)
#define C_CREAD(tty) _C_FLAG((tty), CREAD)
#define C_PARENB(tty) _C_FLAG((tty), PARENB)
#define C_PARODD(tty) _C_FLAG((tty), PARODD)
#define C_HUPCL(tty) _C_FLAG((tty), HUPCL)
#define C_CLOCAL(tty) _C_FLAG((tty), CLOCAL)
#define C_CIBAUD(tty) _C_FLAG((tty), CIBAUD)
#define C_CRTSCTS(tty) _C_FLAG((tty), CRTSCTS)
#define C_CMSPAR(tty) _C_FLAG((tty), CMSPAR)
#define L_ISIG(tty) _L_FLAG((tty), ISIG)
#define L_ICANON(tty) _L_FLAG((tty), ICANON)
#define L_XCASE(tty) _L_FLAG((tty), XCASE)
#define L_ECHO(tty) _L_FLAG((tty), ECHO)
#define L_ECHOE(tty) _L_FLAG((tty), ECHOE)
#define L_ECHOK(tty) _L_FLAG((tty), ECHOK)
#define L_ECHONL(tty) _L_FLAG((tty), ECHONL)
#define L_NOFLSH(tty) _L_FLAG((tty), NOFLSH)
#define L_TOSTOP(tty) _L_FLAG((tty), TOSTOP)
#define L_ECHOCTL(tty) _L_FLAG((tty), ECHOCTL)
#define L_ECHOPRT(tty) _L_FLAG((tty), ECHOPRT)
#define L_ECHOKE(tty) _L_FLAG((tty), ECHOKE)
#define L_FLUSHO(tty) _L_FLAG((tty), FLUSHO)
#define L_PENDIN(tty) _L_FLAG((tty), PENDIN)
#define L_IEXTEN(tty) _L_FLAG((tty), IEXTEN)
#define L_EXTPROC(tty) _L_FLAG((tty), EXTPROC)
struct device;
struct signal_struct;
/*
* Port level information. Each device keeps its own port level information
* so provide a common structure for those ports wanting to use common support
* routines.
*
* The tty port has a different lifetime to the tty so must be kept apart.
* In addition be careful as tty -> port mappings are valid for the life
* of the tty object but in many cases port -> tty mappings are valid only
* until a hangup so don't use the wrong path.
*/
struct tty_port;
struct tty_port_operations {
/* Return 1 if the carrier is raised */
int (*carrier_raised)(struct tty_port *port);
/* Control the DTR line */
void (*dtr_rts)(struct tty_port *port, int raise);
/* Called when the last close completes or a hangup finishes
IFF the port was initialized. Do not use to free resources. Called
under the port mutex to serialize against activate/shutdowns */
void (*shutdown)(struct tty_port *port);
/* Called under the port mutex from tty_port_open, serialized using
the port mutex */
/* FIXME: long term getting the tty argument *out* of this would be
good for consoles */
int (*activate)(struct tty_port *port, struct tty_struct *tty);
/* Called on the final put of a port */
void (*destruct)(struct tty_port *port);
};
struct tty_port {
struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* User TTY flags ASYNC_ */
unsigned long iflags; /* Internal flags TTY_PORT_ */
unsigned char console:1, /* port is a console */
low_latency:1; /* optional: tune for latency */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
unsigned char *xmit_buf; /* Optional buffer */
unsigned int close_delay; /* Close port delay */
unsigned int closing_wait; /* Delay for output */
int drain_delay; /* Set to zero if no pure time
based drain is needed else
set to size of fifo */
struct kref kref; /* Ref counter */
};
/* tty_port::iflags bits -- use atomic bit ops */
#define TTY_PORT_INITIALIZED 0 /* device is initialized */
#define TTY_PORT_SUSPENDED 1 /* device is suspended */
#define TTY_PORT_ACTIVE 2 /* device is open */
/*
* uart drivers: use the uart_port::status field and the UPSTAT_* defines
* for s/w-based flow control steering and carrier detection status
*/
#define TTY_PORT_CTS_FLOW 3 /* h/w flow control enabled */
#define TTY_PORT_CHECK_CD 4 /* carrier detect enabled */
/*
* Where all of the state associated with a tty is kept while the tty
* is open. Since the termios state should be kept even if the tty
* has been closed --- for things like the baud rate, etc --- it is
* not stored here, but rather a pointer to the real state is stored
* here. Possible the winsize structure should have the same
* treatment, but (1) the default 80x24 is usually right and (2) it's
* most often used by a windowing system, which will set the correct
* size each time the window is created or resized anyway.
* - TYT, 9/14/92
*/
struct tty_operations;
struct tty_struct {
int magic;
struct kref kref;
struct device *dev;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
/* Protects ldisc changes: Lock tty not pty */
struct ld_semaphore ldisc_sem;
struct tty_ldisc *ldisc;
struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex throttle_mutex;
struct rw_semaphore termios_rwsem;
struct mutex winsize_mutex;
spinlock_t ctrl_lock;
spinlock_t flow_lock;
/* Termios values are protected by the termios rwsem */
struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
struct pid *session;
unsigned long flags;
int count;
struct winsize winsize; /* winsize_mutex */
unsigned long stopped:1, /* flow_lock */
flow_stopped:1,
unused:BITS_PER_LONG - 2;
int hw_stopped;
unsigned long ctrl_status:8, /* ctrl_lock */
packet:1,
unused_ctrl:BITS_PER_LONG - 9;
unsigned int receive_room; /* Bytes free for queue */
int flow_change;
struct tty_struct *link;
struct fasync_struct *fasync;
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
struct work_struct hangup_work;
void *disc_data;
void *driver_data;
spinlock_t files_lock; /* protects tty_files list */
struct list_head tty_files;
#define N_TTY_BUF_SIZE 4096
int closing;
unsigned char *write_buf;
int write_cnt;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
};
/* Each of a tty's open files has private_data pointing to tty_file_private */
struct tty_file_private {
struct tty_struct *tty;
struct file *file;
struct list_head list;
};
/* tty magic number */
#define TTY_MAGIC 0x5401
/*
* These bits are used in the flags field of the tty structure.
*
* So that interrupts won't be able to mess up the queues,
* copy_to_cooked must be atomic with respect to itself, as must
* tty->write. Thus, you must use the inline functions set_bit() and
* clear_bit() to make things atomic.
*/
#define TTY_THROTTLED 0 /* Call unthrottle() at threshold min */
#define TTY_IO_ERROR 1 /* Cause an I/O error (may be no ldisc too) */
#define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_LDISC_HALTED 22 /* Line discipline is halted */
/* Values for tty->flow_change */
#define TTY_THROTTLE_SAFE 1
#define TTY_UNTHROTTLE_SAFE 2
static inline void __tty_set_flow_change(struct tty_struct *tty, int val)
{
tty->flow_change = val;
}
static inline void tty_set_flow_change(struct tty_struct *tty, int val)
{
tty->flow_change = val;
smp_mb();
}
static inline bool tty_io_error(struct tty_struct *tty)
{
return test_bit(TTY_IO_ERROR, &tty->flags);
}
static inline bool tty_throttled(struct tty_struct *tty)
{
return test_bit(TTY_THROTTLED, &tty->flags);
}
#ifdef CONFIG_TTY
extern void console_init(void);
extern void tty_kref_put(struct tty_struct *tty);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern void tty_vhangup_self(void);
extern void disassociate_ctty(int priv);
extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
/* tty_io.c */
extern int __init tty_init(void);
extern const char *tty_name(const struct tty_struct *tty);
#else
static inline void console_init(void)
{ }
static inline void tty_kref_put(struct tty_struct *tty)
{ }
static inline struct pid *tty_get_pgrp(struct tty_struct *tty)
{ return NULL; }
static inline void tty_vhangup_self(void)
{ }
static inline void disassociate_ctty(int priv)
{ }
static inline dev_t tty_devnum(struct tty_struct *tty)
{ return 0; }
static inline void proc_clear_tty(struct task_struct *p)
{ }
static inline struct tty_struct *get_current_tty(void)
{ return NULL; }
/* tty_io.c */
static inline int __init tty_init(void)
{ return 0; }
static inline const char *tty_name(const struct tty_struct *tty)
{ return "(none)"; }
#endif
extern struct ktermios tty_std_termios;
extern int vcs_init(void);
extern struct class *tty_class;
/**
* tty_kref_get - get a tty reference
* @tty: tty device
*
* Return a new reference to a tty object. The caller must hold
* sufficient locks/counts to ensure that their existing reference cannot
* go away
*/
static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
{
if (tty)
kref_get(&tty->kref);
return tty;
}
extern const char *tty_driver_name(const struct tty_struct *tty);
extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
extern int __tty_check_change(struct tty_struct *tty, int sig);
extern int tty_check_change(struct tty_struct *tty);
extern void __stop_tty(struct tty_struct *tty);
extern void stop_tty(struct tty_struct *tty);
extern void __start_tty(struct tty_struct *tty);
extern void start_tty(struct tty_struct *tty);
extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
extern struct device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *dev);
extern struct device *tty_register_device_attr(struct tty_driver *driver,
unsigned index, struct device *device,
void *drvdata,
const struct attribute_group **attr_grp);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
extern void tty_write_message(struct tty_struct *tty, char *msg);
extern int tty_send_xchar(struct tty_struct *tty, char ch);
extern int tty_put_char(struct tty_struct *tty, unsigned char c);
extern int tty_chars_in_buffer(struct tty_struct *tty);
extern int tty_write_room(struct tty_struct *tty);
extern void tty_driver_flush_buffer(struct tty_struct *tty);
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_throttle_safe(struct tty_struct *tty);
extern int tty_unthrottle_safe(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
extern int is_current_pgrp_orphaned(void);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
extern void no_tty(void);
extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
extern void tty_buffer_init(struct tty_port *port);
extern void tty_buffer_set_lock_subclass(struct tty_port *port);
extern bool tty_buffer_restart_work(struct tty_port *port);
extern bool tty_buffer_cancel_work(struct tty_port *port);
extern void tty_buffer_flush_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
speed_t ibaud, speed_t obaud);
extern void tty_encode_baud_rate(struct tty_struct *tty,
speed_t ibaud, speed_t obaud);
/**
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
*
* Locking: none
*/
static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
{
return tty_termios_baud_rate(&tty->termios);
}
extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
extern void tty_ldisc_hangup(struct tty_struct *tty, bool reset);
extern int tty_ldisc_reinit(struct tty_struct *tty, int disc);
extern const struct file_operations tty_ldiscs_proc_fops;
extern void tty_wakeup(struct tty_struct *tty);
extern void tty_ldisc_flush(struct tty_struct *tty);
extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx);
extern int tty_alloc_file(struct file *file);
extern void tty_add_file(struct tty_struct *tty, struct file *file);
extern void tty_free_file(struct file *file);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
extern int tty_release(struct inode *inode, struct file *filp);
extern void tty_init_termios(struct tty_struct *tty);
extern int tty_standard_install(struct tty_driver *driver,
struct tty_struct *tty);
extern struct mutex tty_mutex;
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
extern void tty_port_init(struct tty_port *port);
extern void tty_port_link_device(struct tty_port *port,
struct tty_driver *driver, unsigned index);
extern struct device *tty_port_register_device(struct tty_port *port,
struct tty_driver *driver, unsigned index,
struct device *device);
extern struct device *tty_port_register_device_attr(struct tty_port *port,
struct tty_driver *driver, unsigned index,
struct device *device, void *drvdata,
const struct attribute_group **attr_grp);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_destroy(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
static inline struct tty_port *tty_port_get(struct tty_port *port)
{
if (port && kref_get_unless_zero(&port->kref))
return port;
return NULL;
}
/* If the cts flow control is enabled, return true. */
static inline bool tty_port_cts_enabled(struct tty_port *port)
{
return test_bit(TTY_PORT_CTS_FLOW, &port->iflags);
}
static inline void tty_port_set_cts_flow(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_CTS_FLOW, &port->iflags);
else
clear_bit(TTY_PORT_CTS_FLOW, &port->iflags);
}
static inline bool tty_port_active(struct tty_port *port)
{
return test_bit(TTY_PORT_ACTIVE, &port->iflags);
}
static inline void tty_port_set_active(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_ACTIVE, &port->iflags);
else
clear_bit(TTY_PORT_ACTIVE, &port->iflags);
}
static inline bool tty_port_check_carrier(struct tty_port *port)
{
return test_bit(TTY_PORT_CHECK_CD, &port->iflags);
}
static inline void tty_port_set_check_carrier(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_CHECK_CD, &port->iflags);
else
clear_bit(TTY_PORT_CHECK_CD, &port->iflags);
}
static inline bool tty_port_suspended(struct tty_port *port)
{
return test_bit(TTY_PORT_SUSPENDED, &port->iflags);
}
static inline void tty_port_set_suspended(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_SUSPENDED, &port->iflags);
else
clear_bit(TTY_PORT_SUSPENDED, &port->iflags);
}
static inline bool tty_port_initialized(struct tty_port *port)
{
return test_bit(TTY_PORT_INITIALIZED, &port->iflags);
}
static inline void tty_port_set_initialized(struct tty_port *port, bool val)
{
if (val)
set_bit(TTY_PORT_INITIALIZED, &port->iflags);
else
clear_bit(TTY_PORT_INITIALIZED, &port->iflags);
}
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_raise_dtr_rts(struct tty_port *port);
extern void tty_port_lower_dtr_rts(struct tty_port *port);
extern void tty_port_hangup(struct tty_port *port);
extern void tty_port_tty_hangup(struct tty_port *port, bool check_clocal);
extern void tty_port_tty_wakeup(struct tty_port *port);
extern int tty_port_block_til_ready(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern int tty_port_close_start(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
struct tty_struct *tty);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
static inline int tty_port_users(struct tty_port *port)
{
return port->count + port->blocked_open;
}
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_set_ldisc(struct tty_struct *tty, int disc);
extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
extern void tty_ldisc_release(struct tty_struct *tty);
extern void tty_ldisc_init(struct tty_struct *tty);
extern void tty_ldisc_deinit(struct tty_struct *tty);
extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
char *f, int count);
/* n_tty.c */
extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
extern void __init n_tty_init(void);
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
extern int tty_audit_push(void);
#else
static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
{
}
static inline void tty_audit_exit(void)
{
}
static inline void tty_audit_fork(struct signal_struct *sig)
{
}
static inline int tty_audit_push(void)
{
return 0;
}
#endif
/* tty_ioctl.c */
extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
/* vt.c */
extern int vt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
extern long vt_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
/* tty_mutex.c */
/* functions for preparation of BKL removal */
extern void tty_lock(struct tty_struct *tty);
extern int tty_lock_interruptible(struct tty_struct *tty);
extern void tty_unlock(struct tty_struct *tty);
extern void tty_lock_slave(struct tty_struct *tty);
extern void tty_unlock_slave(struct tty_struct *tty);
extern void tty_set_lock_subclass(struct tty_struct *tty);
#ifdef CONFIG_PROC_FS
extern void proc_tty_register_driver(struct tty_driver *);
extern void proc_tty_unregister_driver(struct tty_driver *);
#else
static inline void proc_tty_register_driver(struct tty_driver *d) {}
static inline void proc_tty_unregister_driver(struct tty_driver *d) {}
#endif
#define tty_msg(fn, tty, f, ...) \
fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__)
#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__)
#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__)
#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__)
#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__)
#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__)
#define tty_info_ratelimited(tty, f, ...) \
tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__)
#endif
Reference in a new issue View git blame Copy permalink