linux-stable/net/hsr/hsr_slave.c
Ravi Gunasekaran c72c37eb30 net: hsr: hsr_slave: Fix the promiscuous mode in offload mode
[ Upstream commit b11c81731c ]

commit e748d0fd66 ("net: hsr: Disable promiscuous mode in
offload mode") disables promiscuous mode of slave devices
while creating an HSR interface. But while deleting the
HSR interface, it does not take care of it. It decreases the
promiscuous mode count, which eventually enables promiscuous
mode on the slave devices when creating HSR interface again.

Fix this by not decrementing the promiscuous mode count while
deleting the HSR interface when offload is enabled.

Fixes: e748d0fd66 ("net: hsr: Disable promiscuous mode in offload mode")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-10 16:37:56 +02:00

231 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright 2011-2014 Autronica Fire and Security AS
*
* Author(s):
* 2011-2014 Arvid Brodin, arvid.brodin@alten.se
*
* Frame handler other utility functions for HSR and PRP.
*/
#include "hsr_slave.h"
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include "hsr_main.h"
#include "hsr_device.h"
#include "hsr_forward.h"
#include "hsr_framereg.h"
bool hsr_invalid_dan_ingress_frame(__be16 protocol)
{
return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
}
static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
{
struct sk_buff *skb = *pskb;
struct hsr_port *port;
struct hsr_priv *hsr;
__be16 protocol;
/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
return RX_HANDLER_PASS;
if (!skb_mac_header_was_set(skb)) {
WARN_ONCE(1, "%s: skb invalid", __func__);
return RX_HANDLER_PASS;
}
port = hsr_port_get_rcu(skb->dev);
if (!port)
goto finish_pass;
hsr = port->hsr;
if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
/* Directly kill frames sent by ourselves */
kfree_skb(skb);
goto finish_consume;
}
/* For HSR, only tagged frames are expected (unless the device offloads
* HSR tag removal), but for PRP there could be non tagged frames as
* well from Single attached nodes (SANs).
*/
protocol = eth_hdr(skb)->h_proto;
if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
hsr->proto_ops->invalid_dan_ingress_frame &&
hsr->proto_ops->invalid_dan_ingress_frame(protocol))
goto finish_pass;
skb_push(skb, ETH_HLEN);
skb_reset_mac_header(skb);
if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
protocol == htons(ETH_P_HSR))
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
skb_reset_mac_len(skb);
hsr_forward_skb(skb, port);
finish_consume:
return RX_HANDLER_CONSUMED;
finish_pass:
return RX_HANDLER_PASS;
}
bool hsr_port_exists(const struct net_device *dev)
{
return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
}
static int hsr_check_dev_ok(struct net_device *dev,
struct netlink_ext_ack *extack)
{
/* Don't allow HSR on non-ethernet like devices */
if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
dev->addr_len != ETH_ALEN) {
NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
return -EINVAL;
}
/* Don't allow enslaving hsr devices */
if (is_hsr_master(dev)) {
NL_SET_ERR_MSG_MOD(extack,
"Cannot create trees of HSR devices.");
return -EINVAL;
}
if (hsr_port_exists(dev)) {
NL_SET_ERR_MSG_MOD(extack,
"This device is already a HSR slave.");
return -EINVAL;
}
if (is_vlan_dev(dev)) {
NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
return -EINVAL;
}
if (dev->priv_flags & IFF_DONT_BRIDGE) {
NL_SET_ERR_MSG_MOD(extack,
"This device does not support bridging.");
return -EOPNOTSUPP;
}
/* HSR over bonded devices has not been tested, but I'm not sure it
* won't work...
*/
return 0;
}
/* Setup device to be added to the HSR bridge. */
static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
struct hsr_port *port,
struct netlink_ext_ack *extack)
{
struct net_device *hsr_dev;
struct hsr_port *master;
int res;
/* Don't use promiscuous mode for offload since L2 frame forward
* happens at the offloaded hardware.
*/
if (!port->hsr->fwd_offloaded) {
res = dev_set_promiscuity(dev, 1);
if (res)
return res;
}
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
hsr_dev = master->dev;
res = netdev_upper_dev_link(dev, hsr_dev, extack);
if (res)
goto fail_upper_dev_link;
res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
if (res)
goto fail_rx_handler;
dev_disable_lro(dev);
return 0;
fail_rx_handler:
netdev_upper_dev_unlink(dev, hsr_dev);
fail_upper_dev_link:
if (!port->hsr->fwd_offloaded)
dev_set_promiscuity(dev, -1);
return res;
}
int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
enum hsr_port_type type, struct netlink_ext_ack *extack)
{
struct hsr_port *port, *master;
int res;
if (type != HSR_PT_MASTER) {
res = hsr_check_dev_ok(dev, extack);
if (res)
return res;
}
port = hsr_port_get_hsr(hsr, type);
if (port)
return -EBUSY; /* This port already exists */
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
port->hsr = hsr;
port->dev = dev;
port->type = type;
if (type != HSR_PT_MASTER) {
res = hsr_portdev_setup(hsr, dev, port, extack);
if (res)
goto fail_dev_setup;
}
list_add_tail_rcu(&port->port_list, &hsr->ports);
synchronize_rcu();
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
return 0;
fail_dev_setup:
kfree(port);
return res;
}
void hsr_del_port(struct hsr_port *port)
{
struct hsr_priv *hsr;
struct hsr_port *master;
hsr = port->hsr;
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
list_del_rcu(&port->port_list);
if (port != master) {
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
netdev_rx_handler_unregister(port->dev);
if (!port->hsr->fwd_offloaded)
dev_set_promiscuity(port->dev, -1);
netdev_upper_dev_unlink(port->dev, master->dev);
}
synchronize_rcu();
kfree(port);
}