linux-stable/drivers/ptp/ptp_clockmatrix.h
Vincent Cheng 425d2b1c56 ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode.
Add idtcm_adjphase() to support PHC write phase mode.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02 16:31:45 -07:00

108 lines
2.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* PTP hardware clock driver for the IDT ClockMatrix(TM) family of timing and
* synchronization devices.
*
* Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
*/
#ifndef PTP_IDTCLOCKMATRIX_H
#define PTP_IDTCLOCKMATRIX_H
#include <linux/ktime.h>
#include "idt8a340_reg.h"
#define FW_FILENAME "idtcm.bin"
#define MAX_PHC_PLL 4
#define MAX_ABS_WRITE_PHASE_PICOSECONDS (107374182350LL)
#define PLL_MASK_ADDR (0xFFA5)
#define DEFAULT_PLL_MASK (0x04)
#define SET_U16_LSB(orig, val8) (orig = (0xff00 & (orig)) | (val8))
#define SET_U16_MSB(orig, val8) (orig = (0x00ff & (orig)) | (val8 << 8))
#define OUTPUT_MASK_PLL0_ADDR (0xFFB0)
#define OUTPUT_MASK_PLL1_ADDR (0xFFB2)
#define OUTPUT_MASK_PLL2_ADDR (0xFFB4)
#define OUTPUT_MASK_PLL3_ADDR (0xFFB6)
#define DEFAULT_OUTPUT_MASK_PLL0 (0x003)
#define DEFAULT_OUTPUT_MASK_PLL1 (0x00c)
#define DEFAULT_OUTPUT_MASK_PLL2 (0x030)
#define DEFAULT_OUTPUT_MASK_PLL3 (0x0c0)
#define POST_SM_RESET_DELAY_MS (3000)
#define PHASE_PULL_IN_THRESHOLD_NS (150000)
#define TOD_WRITE_OVERHEAD_COUNT_MAX (5)
#define TOD_BYTE_COUNT (11)
#define WR_PHASE_SETUP_MS (5000)
/* Values of DPLL_N.DPLL_MODE.PLL_MODE */
enum pll_mode {
PLL_MODE_MIN = 0,
PLL_MODE_NORMAL = PLL_MODE_MIN,
PLL_MODE_WRITE_PHASE = 1,
PLL_MODE_WRITE_FREQUENCY = 2,
PLL_MODE_GPIO_INC_DEC = 3,
PLL_MODE_SYNTHESIS = 4,
PLL_MODE_PHASE_MEASUREMENT = 5,
PLL_MODE_MAX = PLL_MODE_PHASE_MEASUREMENT,
};
enum hw_tod_write_trig_sel {
HW_TOD_WR_TRIG_SEL_MIN = 0,
HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,
HW_TOD_WR_TRIG_SEL_RESERVED = 1,
HW_TOD_WR_TRIG_SEL_TOD_PPS = 2,
HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3,
HW_TOD_WR_TRIG_SEL_PWM_PPS = 4,
HW_TOD_WR_TRIG_SEL_GPIO = 5,
HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6,
WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC,
};
struct idtcm;
struct idtcm_channel {
struct ptp_clock_info caps;
struct ptp_clock *ptp_clock;
struct idtcm *idtcm;
u16 dpll_phase;
u16 dpll_freq;
u16 dpll_n;
u16 dpll_ctrl_n;
u16 dpll_phase_pull_in;
u16 tod_read_primary;
u16 tod_write;
u16 tod_n;
u16 hw_dpll_n;
enum pll_mode pll_mode;
u16 output_mask;
int write_phase_ready;
};
struct idtcm {
struct idtcm_channel channel[MAX_PHC_PLL];
struct i2c_client *client;
u8 page_offset;
u8 pll_mask;
/* Overhead calculation for adjtime */
u8 calculate_overhead_flag;
s64 tod_write_overhead_ns;
ktime_t start_time;
/* Protects I2C read/modify/write registers from concurrent access */
struct mutex reg_lock;
};
struct idtcm_fwrc {
u8 hiaddr;
u8 loaddr;
u8 value;
u8 reserved;
} __packed;
#endif /* PTP_IDTCLOCKMATRIX_H */