linux-stable/drivers/mtd/maps/ichxrom.c
Adrian Hunter 69423d99fc [MTD] update internal API to support 64-bit device size
MTD internal API presently uses 32-bit values to represent
device size.  This patch updates them to 64-bits but leaves
the external API unchanged.  Extending the external API
is a separate issue for several reasons.  First, no one
needs it at the moment.  Secondly, whether the implementation
is done with IOCTLs, sysfs or both is still debated.  Thirdly
external API changes require the internal API to be accepted
first.

Note that although the MTD API will be able to support 64-bit
device sizes, existing drivers do not and are not required
to do so, although NAND base has been updated.

In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
    	- printk message formats
    	- division and modulus of 64-bit values
    	- NAND base support
	- 32-bit local variables used by mtdpart and mtdconcat
	- naughtily assuming one structure maps to another
	in MEMERASE ioctl

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10 13:37:21 +00:00

382 lines
9.7 KiB
C

/*
* ichxrom.c
*
* Normal mappings of chips in physical memory
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/flashchip.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/list.h>
#define xstr(s) str(s)
#define str(s) #s
#define MOD_NAME xstr(KBUILD_BASENAME)
#define ADDRESS_NAME_LEN 18
#define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */
#define BIOS_CNTL 0x4e
#define FWH_DEC_EN1 0xE3
#define FWH_DEC_EN2 0xF0
#define FWH_SEL1 0xE8
#define FWH_SEL2 0xEE
struct ichxrom_window {
void __iomem* virt;
unsigned long phys;
unsigned long size;
struct list_head maps;
struct resource rsrc;
struct pci_dev *pdev;
};
struct ichxrom_map_info {
struct list_head list;
struct map_info map;
struct mtd_info *mtd;
struct resource rsrc;
char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN];
};
static struct ichxrom_window ichxrom_window = {
.maps = LIST_HEAD_INIT(ichxrom_window.maps),
};
static void ichxrom_cleanup(struct ichxrom_window *window)
{
struct ichxrom_map_info *map, *scratch;
u16 word;
/* Disable writes through the rom window */
pci_read_config_word(window->pdev, BIOS_CNTL, &word);
pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
pci_dev_put(window->pdev);
/* Free all of the mtd devices */
list_for_each_entry_safe(map, scratch, &window->maps, list) {
if (map->rsrc.parent)
release_resource(&map->rsrc);
del_mtd_device(map->mtd);
map_destroy(map->mtd);
list_del(&map->list);
kfree(map);
}
if (window->rsrc.parent)
release_resource(&window->rsrc);
if (window->virt) {
iounmap(window->virt);
window->virt = NULL;
window->phys = 0;
window->size = 0;
window->pdev = NULL;
}
}
static int __devinit ichxrom_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
struct ichxrom_window *window = &ichxrom_window;
struct ichxrom_map_info *map = NULL;
unsigned long map_top;
u8 byte;
u16 word;
/* For now I just handle the ichx and I assume there
* are not a lot of resources up at the top of the address
* space. It is possible to handle other devices in the
* top 16MB but it is very painful. Also since
* you can only really attach a FWH to an ICHX there
* a number of simplifications you can make.
*
* Also you can page firmware hubs if an 8MB window isn't enough
* but don't currently handle that case either.
*/
window->pdev = pdev;
/* Find a region continuous to the end of the ROM window */
window->phys = 0;
pci_read_config_byte(pdev, FWH_DEC_EN1, &byte);
if (byte == 0xff) {
window->phys = 0xffc00000;
pci_read_config_byte(pdev, FWH_DEC_EN2, &byte);
if ((byte & 0x0f) == 0x0f) {
window->phys = 0xff400000;
}
else if ((byte & 0x0e) == 0x0e) {
window->phys = 0xff500000;
}
else if ((byte & 0x0c) == 0x0c) {
window->phys = 0xff600000;
}
else if ((byte & 0x08) == 0x08) {
window->phys = 0xff700000;
}
}
else if ((byte & 0xfe) == 0xfe) {
window->phys = 0xffc80000;
}
else if ((byte & 0xfc) == 0xfc) {
window->phys = 0xffd00000;
}
else if ((byte & 0xf8) == 0xf8) {
window->phys = 0xffd80000;
}
else if ((byte & 0xf0) == 0xf0) {
window->phys = 0xffe00000;
}
else if ((byte & 0xe0) == 0xe0) {
window->phys = 0xffe80000;
}
else if ((byte & 0xc0) == 0xc0) {
window->phys = 0xfff00000;
}
else if ((byte & 0x80) == 0x80) {
window->phys = 0xfff80000;
}
if (window->phys == 0) {
printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
goto out;
}
window->phys -= 0x400000UL;
window->size = (0xffffffffUL - window->phys) + 1UL;
/* Enable writes through the rom window */
pci_read_config_word(pdev, BIOS_CNTL, &word);
if (!(word & 1) && (word & (1<<1))) {
/* The BIOS will generate an error if I enable
* this device, so don't even try.
*/
printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
goto out;
}
pci_write_config_word(pdev, BIOS_CNTL, word | 1);
/*
* Try to reserve the window mem region. If this fails then
* it is likely due to the window being "reseved" by the BIOS.
*/
window->rsrc.name = MOD_NAME;
window->rsrc.start = window->phys;
window->rsrc.end = window->phys + window->size - 1;
window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&iomem_resource, &window->rsrc)) {
window->rsrc.parent = NULL;
printk(KERN_DEBUG MOD_NAME
": %s(): Unable to register resource"
" 0x%.16llx-0x%.16llx - kernel bug?\n",
__func__,
(unsigned long long)window->rsrc.start,
(unsigned long long)window->rsrc.end);
}
/* Map the firmware hub into my address space. */
window->virt = ioremap_nocache(window->phys, window->size);
if (!window->virt) {
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
window->phys, window->size);
goto out;
}
/* Get the first address to look for an rom chip at */
map_top = window->phys;
if ((window->phys & 0x3fffff) != 0) {
map_top = window->phys + 0x400000;
}
#if 1
/* The probe sequence run over the firmware hub lock
* registers sets them to 0x7 (no access).
* Probe at most the last 4M of the address space.
*/
if (map_top < 0xffc00000) {
map_top = 0xffc00000;
}
#endif
/* Loop through and look for rom chips */
while((map_top - 1) < 0xffffffffUL) {
struct cfi_private *cfi;
unsigned long offset;
int i;
if (!map) {
map = kmalloc(sizeof(*map), GFP_KERNEL);
}
if (!map) {
printk(KERN_ERR MOD_NAME ": kmalloc failed");
goto out;
}
memset(map, 0, sizeof(*map));
INIT_LIST_HEAD(&map->list);
map->map.name = map->map_name;
map->map.phys = map_top;
offset = map_top - window->phys;
map->map.virt = (void __iomem *)
(((unsigned long)(window->virt)) + offset);
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
sprintf(map->map_name, "%s @%08Lx",
MOD_NAME, (unsigned long long)map->map.phys);
/* Firmware hubs only use vpp when being programmed
* in a factory setting. So in-place programming
* needs to use a different method.
*/
for(map->map.bankwidth = 32; map->map.bankwidth;
map->map.bankwidth >>= 1)
{
char **probe_type;
/* Skip bankwidths that are not supported */
if (!map_bankwidth_supported(map->map.bankwidth))
continue;
/* Setup the map methods */
simple_map_init(&map->map);
/* Try all of the probe methods */
probe_type = rom_probe_types;
for(; *probe_type; probe_type++) {
map->mtd = do_map_probe(*probe_type, &map->map);
if (map->mtd)
goto found;
}
}
map_top += ROM_PROBE_STEP_SIZE;
continue;
found:
/* Trim the size if we are larger than the map */
if (map->mtd->size > map->map.size) {
printk(KERN_WARNING MOD_NAME
" rom(%llu) larger than window(%lu). fixing...\n",
(unsigned long long)map->mtd->size, map->map.size);
map->mtd->size = map->map.size;
}
if (window->rsrc.parent) {
/*
* Registering the MTD device in iomem may not be possible
* if there is a BIOS "reserved" and BUSY range. If this
* fails then continue anyway.
*/
map->rsrc.name = map->map_name;
map->rsrc.start = map->map.phys;
map->rsrc.end = map->map.phys + map->mtd->size - 1;
map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&window->rsrc, &map->rsrc)) {
printk(KERN_ERR MOD_NAME
": cannot reserve MTD resource\n");
map->rsrc.parent = NULL;
}
}
/* Make the whole region visible in the map */
map->map.virt = window->virt;
map->map.phys = window->phys;
cfi = map->map.fldrv_priv;
for(i = 0; i < cfi->numchips; i++) {
cfi->chips[i].start += offset;
}
/* Now that the mtd devices is complete claim and export it */
map->mtd->owner = THIS_MODULE;
if (add_mtd_device(map->mtd)) {
map_destroy(map->mtd);
map->mtd = NULL;
goto out;
}
/* Calculate the new value of map_top */
map_top += map->mtd->size;
/* File away the map structure */
list_add(&map->list, &window->maps);
map = NULL;
}
out:
/* Free any left over map structures */
kfree(map);
/* See if I have any map structures */
if (list_empty(&window->maps)) {
ichxrom_cleanup(window);
return -ENODEV;
}
return 0;
}
static void __devexit ichxrom_remove_one (struct pci_dev *pdev)
{
struct ichxrom_window *window = &ichxrom_window;
ichxrom_cleanup(window);
}
static struct pci_device_id ichxrom_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0, },
};
#if 0
MODULE_DEVICE_TABLE(pci, ichxrom_pci_tbl);
static struct pci_driver ichxrom_driver = {
.name = MOD_NAME,
.id_table = ichxrom_pci_tbl,
.probe = ichxrom_init_one,
.remove = ichxrom_remove_one,
};
#endif
static int __init init_ichxrom(void)
{
struct pci_dev *pdev;
struct pci_device_id *id;
pdev = NULL;
for (id = ichxrom_pci_tbl; id->vendor; id++) {
pdev = pci_get_device(id->vendor, id->device, NULL);
if (pdev) {
break;
}
}
if (pdev) {
return ichxrom_init_one(pdev, &ichxrom_pci_tbl[0]);
}
return -ENXIO;
#if 0
return pci_register_driver(&ichxrom_driver);
#endif
}
static void __exit cleanup_ichxrom(void)
{
ichxrom_remove_one(ichxrom_window.pdev);
}
module_init(init_ichxrom);
module_exit(cleanup_ichxrom);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>");
MODULE_DESCRIPTION("MTD map driver for BIOS chips on the ICHX southbridge");